You are not logged in.
Pages: 1
I was installing samba, (I don't get that works ok) and when I restart my computer, the resolution es changed, I want the 1024*768 and now It would be 680*400. How can I put the well resolution.
Uses Arch linux, with xfce, with xorg and savage drivers. My screen is a laptop screen of 1024*768. And the resolution was ok until today.
PD: When I turn on the computer, the letters like ms-dos are in a well resolution (1024*768) xfce has the problem.
Offline
Did you change the Driver to "savage" in the xorg.conf and in whatever Default Depth, did you set the mode resolution to 1024x768?
Offline
Yes, in xorg.conf I've got 1024*768, when the computer starts is in 1024*768, but when xfce starts then the resolution changes. I try to change from xfce but 1027*768 res doesn't appear. I'm sure that I've got to write in a .conf from xfce the resolution but I don't what is.
Before, I used savage driver and I've got no problem.
In adittion, I copy the line of resolution in all modes en xorg.conf
Offline
Can you please post your xorg.conf
Offline
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "xtrap"
Load "record"
Load "GLcore"
Load "dbe"
Load "dri"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "es"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 60.0 - 75.0
VertRefresh 60.0 - 75.0
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "HWCursor" # [<bool>]
#Option "SWCursor" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # [<str>]
#Option "UseBIOS" # [<bool>]
#Option "LCDClock" # <freq>
#Option "ShadowStatus" # [<bool>]
#Option "CrtOnly" # [<bool>]
#Option "TvOn" # [<bool>]
#Option "PAL" # [<bool>]
#Option "ForceInit" # [<bool>]
#Option "Overlay" # [<str>]
#Option "TransparencyKey" # [<str>]
#Option "ForceInit" # [<bool>]
#Option "DisableXVMC" # [<bool>]
#Option "DisableTile" # [<bool>]
#Option "DisableCOB" # [<bool>]
#Option "BCIforXv" # [<bool>]
#Option "DVI" # [<bool>]
#Option "BusType" # [<str>]
#Option "DmaType" # [<str>]
#Option "DmaMode" # [<str>]
#Option "AGPMode" # <i>
#Option "AGPSize" # <i>
#Option "DRI" # [<bool>]
Identifier "Card0"
Driver "savage"
VendorName "S3 Inc."
BoardName "86C270-294 Savage/IX-MV"
BusID "PCI:1:1:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Offline
It's ok? I think that it's ok, I don't know where is the trouble...
Also I try with gnome but it has the same trouble...
Last edited by halcor (2008-06-26 17:58:12)
Offline
Your HorizSync is wrong for sure, no way is it the same as the VertRefresh. Apart from that it all looks ok, to the best of my knowledge. Try removing the HorizSync line and restarting to see if that helps.
Last edited by dabski (2008-06-30 12:12:30)
Offline
I love you, It's ok, all works fine!!
Thanks man!
Offline
Pages: 1