Arch Linux

semperfiguy

Member

Registered: 2007-12-03

Posts: 224

No matching device section found.

Hi, When I attempt to start X via start X.  I get this error:

(WW) NVIDIA: No matching Device section for instance (BusID PCI:0:1:3) found

Here is my xorg.conf:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder63)  Mon May 19 00:33:37 PDT 2008


Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Touchpad" "SendCoreEvents"
EndSection

Section "Files"
    RgbPath         "/usr/share/X11/rgb"
    ModulePath      "/usr/lib/xorg/modules"
    FontPath        "/usr/share/fonts/misc"
    FontPath        "/usr/share/fonts/100dpi:unscaled"
    FontPath        "/usr/share/fonts/75dpi:unscaled"
    FontPath        "/usr/share/fonts/TTF"
    FontPath        "/usr/share/fonts/Type1"
EndSection

Section "Module"
    Load           "dbe"
    Load           "glx"
    Load           "xtrap"
    Load           "record"
    Load           "extmod"
    Load           "freetype"
    Load           "synaptics"
EndSection

Section "InputDevice"
    Identifier     "Keyboard0"
    Driver         "kbd"
    Option        "CoreKeyboard"
    Option          "XkbRules" "xorg"
    Option         "XkbLayout" "dvorak,us"
    Option         "XkbOptions" "grp:shifts_toggle"
EndSection

Section "InputDevice"
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/input/mice"
    Option         "Buttons" "5"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    Identifier     "Touchpad"
    Driver         "synaptics"
    Option         "Device" "/dev/input/mouse0"
    Option         "Protocol" "auto-dev"
    Option         "LeftEdge" "1700"
    Option         "RightEdge" "5300"
    Option         "TopEdge" "1700"
    Option         "BottomEdge" "4200"
    Option         "FingerLow" "25"
    Option         "FingerHigh" "30"
    Option         "MaxTapTime" "180"
    Option         "MaxTapMove" "220"
    Option         "VertScrollDelta" "100"
    Option         "MinSpeed" "0.12"
    Option         "MaxSpeed" "0.24"
    Option         "AccelFactor" "0.0010"
    Option         "SHMConfig" "on"
    Option         "VertTwoFingerScroll" "True"    #Virtual scroll when two fingers dragged up/down
    Option         "HorizTwoFingerScroll" "False"    #Virtual scroll when two fingers dragged left/right
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Monitor Vendor"
    ModelName      "Monitor Model"
    HorizSync       30.0 - 130.0
    VertRefresh     50.0 - 100.0
EndSection

Section "Device"
    Identifier     "Card0"
    Driver         "nvidia"
    VendorName     "nVidia Corporation"
    BoardName      "Unknown Board"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Card0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "RenderAccel" "true"
    Option         "NoLogo" "true"
    Option         "AGPFastWrite" "true"
    Option         "EnablePageFlip" "true"
    Option         "AddARGBGLXVisuals" "True"
    SubSection     "Display"
        Viewport    0 0
        Depth       24
    EndSubSection
EndSection

Section "Extensions"
    Option         "Composite" "Enable"
EndSection

And lspci:

[semperfiguy: ~]$ lspci
00:00.0 RAM memory: nVidia Corporation Unknown device 0547 (rev a2)
00:01.0 ISA bridge: nVidia Corporation Unknown device 0548 (rev a2)
00:01.1 SMBus: nVidia Corporation Unknown device 0542 (rev a2)
00:01.2 RAM memory: nVidia Corporation Unknown device 0541 (rev a2)
00:01.3 Co-processor: nVidia Corporation Unknown device 0543 (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:04.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:04.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP67 IDE Controller (rev a1)
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
00:08.0 PCI bridge: nVidia Corporation Unknown device 0561 (rev a2)
00:09.0 IDE interface: nVidia Corporation Unknown device 0550 (rev a2)
00:0a.0 Ethernet controller: nVidia Corporation Unknown device 054c (rev a2)
00:0c.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
00:0d.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
00:12.0 VGA compatible controller: nVidia Corporation Unknown device 0531 (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
02:05.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
02:05.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
02:05.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
02:05.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
02:05.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)
03:00.0 Ethernet controller: Atheros Communications, Inc. AR5006EG 802.11 b/g Wireless PCI Express Adapter (rev 01)

Any help on this?

Last edited by semperfiguy (2008-07-03 15:41:29)

fwojciec

Member

Registered: 2007-05-20

Posts: 1,411

Re: No matching device section found.

Try building the 173.14.09 driver yourself -- the 173.14.05 has a serious regression that prevents it from working on some nvidia cards ("some GeForce FX, 6 and 7 mobile GPUs", according to nvidia website).

Last edited by fwojciec (2008-07-03 15:53:13)