[Solved] Hauppauge PVR-250 + Lirc = Kernel Oops & Pain

georgia_tech_swagger · 2008-07-29 03:21:12

Using:
- Hauppauge PVR-250
--- ivtv
--- lirc_dev
--- lirc_i2c

Modprobe ivtv? Fine.
Modprobe the lirc modules? Fine.
Start lircd service? Fine.
Try to use lirc? FAIL.

This will be my own little self dialog as I get reintroduced to all the pain I use to experience trying to setup MythTV.

lirc_dev: IR Remote Control driver registered, major 61
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
lirc_i2c: chip found @ 0x18 (Hauppauge IR)
lirc_dev: lirc_register_plugin: sample_rate: 10
BUG: unable to handle kernel paging request at 52492071
IP: [<c01832e6>] do_sys_open+0x76/0xf0
*pde = 00000000
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: cx8800 cx88xx bttv ir_common compat_ioctl32 videobuf_dma_sg videobuf_core btcx_risc lirc_i2c lirc_dev ipv6 usb_storage msp3400 saa7115 tuner tea5767 tda8290 tda18271 tda827x tuner_xc2028 xc5000 tda9887 firewire_ohci tuner_simple mt20xx tea5761 firewire_core crc_itu_t psmouse ivtv pcspkr serio_raw emu10k1_gp i2c_algo_bit cx2341x v4l2_common tveeprom ppp_generic ohci1394 gameport ieee1394 nvidia(P) i2c_i801 intel_agp i2c_core agpgart ehci_hcd shpchp pci_hotplug uhci_hcd sg thermal evdev processor fan button battery ac snd_usb_audio snd_usb_lib snd_intel8x0 snd_emu10k1 snd_rawmidi snd_ac97_codec snd_util_mem snd_hwdep snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus slhc skge gspca usbcore videodev v4l1_compat rtc_cmos rtc_core rtc_lib reiserfs sr_mod cdrom sd_mod ata_piix ata_generic pata_acpi libata scsi_mod dock

Pid: 3412, comm: lircd Tainted: P (2.6.25-ARCH #1)
EIP: 0060:[<c01832e6>] EFLAGS: 00010287 CPU: 0
EIP is at do_sys_open+0x76/0xf0
EAX: 52492065 EBX: 40000020 ECX: 00000043 EDX: f5d83260
ESI: ffffff9c EDI: f5072000 EBP: 00000007 ESP: f5d99f84
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process lircd (pid: 3412, ti=f5d98000 task=f543c000 task.ti=f5d98000)
Stack: bfe01a98 00000000 f5d83260 bfe01a98 00000002 bfe0392f f5d98000 c01833dc
bfe01a98 bfe0392f 00000000 00000002 c01050d8 bfe0392f 00000002 bfe01a98
00000000 00000002 bfe01af8 00000005 0000007b 0000007b c0100000 00000005
Call Trace:
[<c01833dc>] sys_open+0x2c/0x40
[<c01050d8>] sysenter_past_esp+0x6d/0xa5
=======================
Code: 78 78 8b 44 24 20 89 d9 89 fa 89 04 24 89 f0 e8 31 ff ff ff 3d 00 f0 ff ff 89 44 24 08 77 6e 8b 54 24 08 bb 20 00 00 40 8b 42 0c <8b> 70 0c 0f b7 56 72 81 e2 00 f0 00 00 81 fa 00 40 00 00 ba 20
EIP: [<c01832e6>] do_sys_open+0x76/0xf0 SS:ESP 0068:f5d99f84
---[ end trace fbdc5cf39936cc8f ]---

Last edited by georgia_tech_swagger (2008-07-29 17:45:56)

georgia_tech_swagger · 2008-07-29 04:01:12

This is indeed a problem in the lirc 0.8.2 package in extra. I have submitted a bug with a fixed PKGBUILD of lirc 0.8.3.

http://bugs.archlinux.org/task/11041

Arch Linux

#1 2008-07-29 03:21:12

[Solved] Hauppauge PVR-250 + Lirc = Kernel Oops & Pain

#2 2008-07-29 04:01:12

Re: [Solved] Hauppauge PVR-250 + Lirc = Kernel Oops & Pain

Board footer