You are not logged in.

hi,
I often installed arch on many different machines but never on an Laptop today i tried to install it on my New Dell XPS M1330 and nothing realy works... first i dried to get wlan to work...but no succes but that not the big problem... after doing:
pacman -Syui did :
pacman -S xorg-server
pacman -S gnome gnome-extras
pacman -S nvidiaEverything went fine an installed
than i tried to start gdm
/etc/rc.d/gdm startit startedt but i had no keyboard an no mosue (usb mouse) in X
then i did
nvidia-xconfigstill the same
i installed synaptics
pacman -S synapticsand used a xconfig of another m1330 user from this forum heś claiming everything works here's the XF86Config:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Thu Feb 14 18:20:37 PST 2008
Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "touchpad" "CorePointer"
    InputDevice    "Mouse0" "SendCoreEvents"
EndSection
Section "Files"
    RgbPath         "/usr/lib/X11/rgb"
EndSection
Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
    Load           "synaptics"
EndSection
Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
    Identifier     "touchpad"
    Driver         "synaptics"
    Option         "Device" "/dev/psaux"
    Option         "Protocol" "auto-dev"
    Option         "LeftEdge" "1700"
    Option         "RightEdge" "5300"
    Option         "TopEdge" "1700"
    Option         "BottomEdge" "4400"
    Option         "FingerLow" "25"
    Option         "FingerHigh" "30"
    Option         "MaxTapTime" "180"
    Option         "MaxTapMove" "220"
    Option         "VertScrollDelta" "100"
    Option         "MinSpeed" "0.06"
    Option         "MaxSpeed" "0.12"
    Option         "AccelFactor" "0.0010"
    Option         "SHMConfig" "on"
EndSection
Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "keyboard"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "de"
    Option         "XkbVariant" "nodeadkeys"
EndSection
Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       30.0 - 110.0
    VertRefresh     50.0 - 150.0
    Option         "DPMS"
EndSection
Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    Option         "OnDemandVBlankInterrupts" "True"
    Option         "Coolbits" "1"
EndSection
Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    Modes       "1280x800" "1024x768" "800x600" "640x480"
    EndSubSection
EndSectionstarted x again
mouse(us) didn't worked touchpad did worked but the keyboard still does not work in X
maybe i did something wrong but i havent found anyone with this problem even in m1330 article in the wiki theres nothing about an issue with the keyboard...
i hope somone can help couse i realy only use arch an want it to work on my laptop too
Last edited by kanim (2008-08-11 21:57:47)
Offline
Hey kanim, could you please paste lspci output ? I know how you feel, because I'm struggling also to get Arch work smoothly on laptop. I think the Driver "keyboard" should be replaced with Driver "kbd"
Here's my xorg.conf, you may find it usefull 
Offline

kbd changed nothing still no keyboard...
and i can't post the output how should i doo it ? i have no X
Offline
When I'm at framebuffer I use links and open this page http://pastebin.ca/upload.php , before that I have already dumped the lspci output ( lspci > file ) and wrote the path to the file in the link I gave, after that i write down the submission number and that's it.
Offline

ok that was a easy one  thx for the info
 thx for the info 
here is the output:
http://pastebin.ca/1092578
Offline
Offline

yes my card is supported i think wlan isn´t that big problem and it is not as important as to have an keyboard 
hmm... as its only not working in X there must be an mistake in the config... but i have no guess where..
Offline
Em, what errors does X give you when you start it ? ; cat /var/log/Xorg.0.log | grep -i EE > xorg and upload it to pastebin.ca
Just for the record - have you got xf86-input-keyboard and xkeyboard-config packages installed ?
Last edited by esters (2008-08-04 16:48:41)
Offline

yes your last guess was right...
i installed xorg-sever instead of xorg  sry for that keyboard issue... i founded it out by typing in startx and nothing happend i thought i need to have installed something wrong...
 sry for that keyboard issue... i founded it out by typing in startx and nothing happend i thought i need to have installed something wrong...
ok now only the usb mouse and the wlan does not work
esters thx for your support you allready helped me realy out..^^
Offline
Thanks 
Btw, speaking about the issue with USB Mouse - try the entries from my xorg.conf (Look above), Mine Logitech NX50 works fine with it.
Offline

Ok USB mouse is working now no only wlan + some things i noticed  battery-display of gnome-panel does not work and i haven't tried suspend but i heard there are big problems with it..
 battery-display of gnome-panel does not work and i haven't tried suspend but i heard there are big problems with it..
Edit: battery-thing is solved installed acpid and started it via /etc/rc.d/acpid start iam addin it to rc.conf
Last edited by kanim (2008-08-04 17:15:57)
Offline

http://wiki.archlinux.org/index.php/Wireless_Setup
Does that help your wlan problem?
http://wiki.archlinux.org/index.php/Dell_XPS_M1330 could also be very informative.
Last edited by Zeist (2008-08-04 17:17:34)
I haven't lost my mind; I have a tape back-up somewhere.
Twitter
Offline
http://wiki.archlinux.org/index.php/Pm-utils is the tools of the trade, I think on nVidia based laptops it is much easier. Just check the wiki.
I have made an article about my Laptop and Arch Linux, Maybe you find something needed - http://esters.wordpress.com/2008/07/18/ … msung-r20/
Offline

i solved the wlan problem it was realy easy with networkmanager(http://wiki.archlinux.org/index.php/NetworkManager)
so know it looks like this
working:
wlan (now with netcfg2)
mouse/keyboard/touchpad
battery-status
cpu-scaling
webcam (a bit slow but ok)
suspend/wakeup
finngerprint
mediakeys
Last edited by kanim (2008-08-11 21:57:14)
Offline