Problems with cheese...

methuselah · 2008-08-28 20:52:44

The cheese program seems to only record video with no real sound... it also only plays really fast.

Any suggestions?

matiit · 2008-08-28 21:08:06

i think it is mainstream bug...(with some drivers only)
I'm recording video like that:

mencoder tv:// -tv driver=v4l2:width=640:height=480:device=/dev/video0 -ovc lavc -nosound -fps 25 -o $name.avi | arecord -f cd $name.wav

mencoder -o $name-merged.avi -ovc copy -audiofile $name.wav -oac pcm $name.avi

methuselah · 2008-08-28 21:12:34

I wish there was a different program that worked with my webcam driver.

IMG · 2008-08-28 22:47:36

what is your webcam / driver combo?

methuselah · 2008-08-28 23:39:48

IMG wrote:

what is your webcam / driver combo?

Suyin Corp makes the hp webcam, I use the linux uvc driver that comes default in the 2.6.26.3-1 and the zenmm 2.6.27-rc-1 kernels that I am using on a HP Pavilion dv9920us notebook.

lsusb:

$ lsusb
Bus 004 Device 003: ID 064e:a110 Suyin Corp. 
Bus 004 Device 001: ID 1d6b:0002  
Bus 003 Device 003: ID 03f0:171d Hewlett-Packard 
Bus 003 Device 001: ID 1d6b:0001  
Bus 002 Device 001: ID 1d6b:0002  
Bus 001 Device 001: ID 1d6b:0001

lspci:

$ lspci
00:00.0 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP67 ISA Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP67 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
00:01.3 Co-processor: nVidia Corporation MCP67 Co-processor (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:04.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:04.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP67 IDE Controller (rev a1)
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
00:08.0 PCI bridge: nVidia Corporation MCP67 PCI Bridge (rev a2)
00:09.0 IDE interface: nVidia Corporation MCP67 AHCI Controller (rev a2)
00:0a.0 Ethernet controller: nVidia Corporation MCP67 Ethernet (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:0d.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:12.0 VGA compatible controller: nVidia Corporation GeForce 7150M (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
02:05.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
02:05.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
02:05.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
02:05.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
02:05.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)
03:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)

The gnome menu "Applications-->-- Sound & Video-->-- Sound Recorder" doesn't work either.

I also just installed the ekiga app and the volume/sound won't work in there either.

Last edited by methuselah (2008-08-28 23:41:29)

IMG · 2008-08-29 13:48:14

I cant regognize your camera, but i do have some info:

In general community has been moving from v4l (video for linux) to v4l2 project pretty much a try like alsa. However it is not that much developed like alsa.Nor the driver neither the applications that use the v4l2 api (implemented partially by the v4l2 drivers).I am not sure, if uvc driver has audio support implemented, but here http://www.quickcamteam.net/software/linux you can find several info on apps supported under several driver families(like uvc).You could try another driver maybe, but i guess you would want to stick with uvc as it seems to be the most active project.Also what is your dmesg output when you plug in the camera?

mine is :

usb 1-3: new high speed USB device using ehci_hcd and address 5                 
usb 1-3: configuration #1 chosen from 1 choice                                  
Linux video capture interface: v2.00                                            
[b]usbcore: registered new interface driver snd-usb-audio[/b]                          
uvcvideo: Found UVC 1.00 device <unnamed> (046d:08c9)                           
input: UVC Camera (046d:08c9) as /class/input/input10                           
usbcore: registered new interface driver uvcvideo                               
USB Video Class driver (v0.1.0)

Seems like that uvc driver registers within the kernel some audio capabilities, but i have zero indormation whether it is trully implemented or it is just software scaffolding.Maybe a developer that has scratched this specific kernel part could shed some light regarding this issue.

As a side note, have you double checked if this mic is somehow muted?

IMG

Last edited by IMG (2008-08-29 13:58:19)

methuselah · 2008-08-29 20:30:00

IMG wrote:

I cant regognize your camera, but i do have some info:
In general community has been moving from v4l (video for linux) to v4l2 project pretty much a try like alsa. However it is not that much developed like alsa.Nor the driver neither the applications that use the v4l2 api (implemented partially by the v4l2 drivers).I am not sure, if uvc driver has audio support implemented, but here http://www.quickcamteam.net/software/linux you can find several info on apps supported under several driver families(like uvc).You could try another driver maybe, but i guess you would want to stick with uvc as it seems to be the most active project.Also what is your dmesg output when you plug in the camera?
mine is :
usb 1-3: new high speed USB device using ehci_hcd and address 5                 
usb 1-3: configuration #1 chosen from 1 choice                                  
Linux video capture interface: v2.00                                            
[b]usbcore: registered new interface driver snd-usb-audio[/b]                          
uvcvideo: Found UVC 1.00 device <unnamed> (046d:08c9)                           
input: UVC Camera (046d:08c9) as /class/input/input10                           
usbcore: registered new interface driver uvcvideo                               
USB Video Class driver (v0.1.0)
Seems like that uvc driver registers within the kernel some audio capabilities, but i have zero indormation whether it is trully implemented or it is just software scaffolding.Maybe a developer that has scratched this specific kernel part could shed some light regarding this issue.
As a side note, have you double checked if this mic is somehow muted?
IMG

The webcam is part of the hp laptop so it shows in the dmesg after boot up (please ignore all of the PM parts, it is a verbose setting because I can't figure out how to make pm-suspend work with the newer kernel):

]$ dmesg
Linux version 2.6.27-rc1-zenmm0 (root@hp) (gcc version 4.3.1 20080724 (prerelease) (GCC) ) #1 SMP PREEMPT ZEN Fri Aug 22 19:13:47 EDT 2008
Command line: root=/dev/disk/by-uuid/fe976406-f6d8-4cd0-99ea-e6e8aab2c397 resume=swap:/dev/sda5 iommu=noaperture ro
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
 BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bffd0000 (usable)
 BIOS-e820: 00000000bffd0000 - 00000000bffe5000 (ACPI data)
 BIOS-e820: 00000000bffe5000 - 00000000bffe6000 (ACPI NVS)
 BIOS-e820: 00000000bffe6000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000cbf80000 - 00000000d0000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
last_pfn = 0x130000 max_arch_pfn = 0x3ffffffff
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xbffd0 max_arch_pfn = 0x3ffffffff
init_memory_mapping
 0000000000 - 00bfe00000 page 2M
 00bfe00000 - 00bffd0000 page 4k
kernel direct mapping tables up to bffd0000 @ 8000-d000
last_map_addr: bffd0000 end: bffd0000
init_memory_mapping
 0100000000 - 0130000000 page 2M
kernel direct mapping tables up to 130000000 @ b000-11000
last_map_addr: 130000000 end: 130000000
RAMDISK: 37f87000 - 37fefb54
DMI present.
ACPI: RSDP 000F8250, 0024 (r2 PTLTD )
ACPI: XSDT BFFDC0A6, 006C (r1 HPQOEM SLIC-MPC  6040000  LTP        0)
ACPI: FACP BFFE4992, 00F4 (r3 NVIDIA MCP67-M   6040000 PTL_    F4240)
ACPI: DSDT BFFDC112, 880C (r1 NVIDIA    MCP67  6040000 MSFT  3000000)
ACPI: FACS BFFE5FC0, 0040
ACPI: TCPA BFFE4A86, 0032 (r1 Phoeni  x        6040000  TL         0)
ACPI: SRAT BFFE4AB8, 00C8 (r1 AMD    HAMMER    6040000 AMD         1)
ACPI: SSDT BFFE4B80, 0206 (r1 PTLTD  POWERNOW  6040000  LTP        1)
ACPI: MCFG BFFE4D86, 003C (r1 PTLTD    MCFG    6040000  LTP        0)
ACPI: HPET BFFE4DC2, 0038 (r1 PTLTD  HPETTBL   6040000  LTP        1)
ACPI: APIC BFFE4DFA, 0068 (r1 PTLTD       APIC    6040000  LTP        0)
ACPI: BOOT BFFE4E62, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
ACPI: SLIC BFFE4E8A, 0176 (r1 HPQOEM SLIC-MPC  6040000  LTP        1)
ACPI: DMI detected: Hewlett-Packard
(7 early reservations) ==> bootmem [0000000000 - 0130000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0000200000 - 0000699b74]    TEXT DATA BSS ==> [0000200000 - 0000699b74]
  #3 [0037f87000 - 0037fefb54]          RAMDISK ==> [0037f87000 - 0037fefb54]
  #4 [000009e000 - 0000100000]    BIOS reserved ==> [000009e000 - 0000100000]
  #5 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
  #6 [000000b000 - 000000c000]          PGTABLE ==> [000000b000 - 000000c000]
Scan SMP from ffff880000000000 for 1024 bytes.
Scan SMP from ffff88000009fc00 for 1024 bytes.
Scan SMP from ffff8800000f0000 for 65536 bytes.
found SMP MP-table at [ffff8800000f8220] 000f8220
 [ffffe20000000000-ffffe200043fffff] PMD -> [ffff880028200000-ffff88002c5fffff] on node 0
sizeof(struct page) = 56
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00130000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000000 -> 0x0000009e
    0: 0x00000100 -> 0x000bffd0
    0: 0x00100000 -> 0x00130000
On node 0 totalpages: 982894
  DMA zone: 2658 pages, LIFO batch:0
  DMA32 zone: 768008 pages, LIFO batch:31
  Normal zone: 193920 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x10de8201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
PM: Registered nosave memory: 00000000bffd0000 - 00000000bffe5000
PM: Registered nosave memory: 00000000bffe5000 - 00000000bffe6000
PM: Registered nosave memory: 00000000bffe6000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000cbf80000
PM: Registered nosave memory: 00000000cbf80000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
PERCPU: Allocating 45504 bytes of per cpu data
NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 964586
Kernel command line: root=/dev/disk/by-uuid/fe976406-f6d8-4cd0-99ea-e6e8aab2c397 resume=swap:/dev/sda5 iommu=noaperture ro
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC calibrated against PM_TIMER
Detected 2000.175 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x20000000 - 0x24000000
Memory: 3783412k/4980736k available (2694k kernel code, 147184k reserved, 1148k data, 328k init)
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. <6>4001.12 BogoMIPS (lpj=4630034)
Security Framework initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
tseg: 00cbf80000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using C1E aware idle routine
ACPI: Core revision 20080609
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
Using local APIC timer interrupts.
APIC timer calibration result 12501149
Detected 12.501 MHz APIC timer.
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. <6>4001.11 BogoMIPS (lpj=4630024)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
System has C1E enabled
CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
Brought up 2 CPUs
Total of 2 processors activated (8003.23 BogoMIPS).
PM: Adding info for No Bus:platform
net_namespace: 1536 bytes
Time: 15:50:59  Date: 08/29/08
NET: Registered protocol family 16
No dock devices found.
PM: Adding info for No Bus:vtcon0
node 0 link 0: io port [1000, fffff]
TOM: 00000000d0000000 aka 3328M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [f0000000, fe0bffff]
TOM2: 0000000130000000 aka 4864M
bus: [00,ff] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [a0000, bffff]
bus: 00 index 2 mmio: [d0000000, ffffffff]
bus: 00 index 3 mmio: [130000000, fcffffffff]
ACPI: bus type pci registered
PM: Adding info for No Bus:id
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 4
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - e04fffff
PCI: Using configuration type 1 for base access
PM: Adding info for No Bus:default
Switch to broadcast mode on CPU1
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored via DMI
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PM: Adding info for acpi:LNXSYSTM:00
PM: Adding info for acpi:LNXPWRBN:00
PM: Adding info for acpi:ACPI0007:00
PM: Adding info for acpi:ACPI0007:01
PM: Adding info for acpi:device:00
PM: Adding info for acpi:PNP0C0E:00
PM: Adding info for acpi:ACPI0003:00
Switch to broadcast mode on CPU0
ACPI: EC: non-query interrupt received, switching to interrupt mode
PM: Adding info for acpi:PNP0C0A:00
PM: Adding info for acpi:PNP0C0D:00
PM: Adding info for acpi:HPQ0007:00
PM: Adding info for acpi:PNP0C14:00
PM: Adding info for acpi:PNP0A08:00
PM: Adding info for acpi:PNP0C09:00
PM: Adding info for acpi:device:01
PM: Adding info for acpi:device:02
PM: Adding info for acpi:device:03
PM: Adding info for acpi:device:04
PM: Adding info for acpi:device:05
PM: Adding info for acpi:device:06
PM: Adding info for acpi:device:07
PM: Adding info for acpi:device:08
PM: Adding info for acpi:device:09
PM: Adding info for acpi:device:0a
PM: Adding info for acpi:device:0b
PM: Adding info for acpi:device:0c
PM: Adding info for acpi:device:0d
PM: Adding info for acpi:device:0e
PM: Adding info for acpi:device:0f
PM: Adding info for acpi:device:10
PM: Adding info for acpi:device:11
PM: Adding info for acpi:device:12
PM: Adding info for acpi:device:13
PM: Adding info for acpi:device:14
PM: Adding info for acpi:device:15
PM: Adding info for acpi:device:16
PM: Adding info for acpi:device:17
PM: Adding info for acpi:device:18
PM: Adding info for acpi:device:19
PM: Adding info for acpi:device:1a
PM: Adding info for acpi:device:1b
PM: Adding info for acpi:device:1c
PM: Adding info for acpi:device:1d
PM: Adding info for acpi:device:1e
PM: Adding info for acpi:device:1f
PM: Adding info for acpi:device:20
PM: Adding info for acpi:device:21
PM: Adding info for acpi:PNP0103:00
PM: Adding info for acpi:device:22
PM: Adding info for acpi:PNP0C02:00
PM: Adding info for acpi:PNP0C02:01
PM: Adding info for acpi:PNP0C02:02
PM: Adding info for acpi:PNP0000:00
PM: Adding info for acpi:PNP0100:00
PM: Adding info for acpi:PNP0200:00
PM: Adding info for acpi:PNP0800:00
PM: Adding info for acpi:PNP0B00:00
PM: Adding info for acpi:PNP0C04:00
PM: Adding info for acpi:device:23
PM: Adding info for acpi:device:24
PM: Adding info for acpi:device:25
PM: Adding info for acpi:device:26
PM: Adding info for acpi:device:27
PM: Adding info for acpi:PNP0303:00
PM: Adding info for acpi:SYN013B:00
PM: Adding info for acpi:device:28
PM: Adding info for acpi:PNP0C0F:00
PM: Adding info for acpi:PNP0C0F:01
PM: Adding info for acpi:PNP0C0F:02
PM: Adding info for acpi:PNP0C0F:03
PM: Adding info for acpi:PNP0C0F:04
PM: Adding info for acpi:PNP0C0F:05
PM: Adding info for acpi:PNP0C0F:06
PM: Adding info for acpi:PNP0C0F:07
PM: Adding info for acpi:PNP0C0F:08
PM: Adding info for acpi:PNP0C0F:09
PM: Adding info for acpi:PNP0C0F:0a
PM: Adding info for acpi:PNP0C0F:0b
PM: Adding info for acpi:PNP0C0F:0c
PM: Adding info for acpi:PNP0C0F:0d
PM: Adding info for acpi:PNP0C0F:0e
PM: Adding info for acpi:PNP0C0F:0f
PM: Adding info for acpi:PNP0C0F:10
PM: Adding info for acpi:PNP0C0F:11
PM: Adding info for acpi:PNP0C0F:12
PM: Adding info for acpi:PNP0C0C:00
PM: Adding info for acpi:PNP0C01:00
PM: Adding info for acpi:PNP0C32:00
PM: Adding info for acpi:PNP0C32:01
PM: Adding info for acpi:PNP0C32:02
PM: Adding info for acpi:PNP0C32:03
PM: Adding info for acpi:PNP0C32:04
PM: Adding info for acpi:PNP0C32:05
PM: Adding info for acpi:PNP0C32:06
PM: Adding info for acpi:LNXTHERM:00
PM: Adding info for acpi:LNXTHERM:01
ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PM: Adding info for No Bus:pci0000:00
PM: Adding info for No Bus:0000:00
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: supports D1
pci 0000:00:02.0: supports D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: supports D1
pci 0000:00:02.1: supports D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:04.0: supports D1
pci 0000:00:04.0: supports D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:04.1: supports D1
pci 0000:00:04.1: supports D2
pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.1: PME# disabled
pci 0000:00:07.0: PME# supported from D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:0a.0: supports D1
pci 0000:00:0a.0: supports D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:02:05.0: supports D1
pci 0000:02:05.0: supports D2
pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:05.0: PME# disabled
pci 0000:02:05.1: supports D1
pci 0000:02:05.1: supports D2
pci 0000:02:05.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:05.1: PME# disabled
pci 0000:02:05.2: supports D1
pci 0000:02:05.2: supports D2
pci 0000:02:05.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:05.2: PME# disabled
pci 0000:02:05.3: supports D1
pci 0000:02:05.3: supports D2
pci 0000:02:05.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:05.3: PME# disabled
pci 0000:02:05.4: supports D1
pci 0000:02:05.4: supports D2
pci 0000:02:05.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:05.4: PME# disabled
pci 0000:00:08.0: transparent bridge
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: supports D2
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
PM: Adding info for pci:0000:00:00.0
PM: Adding info for pci:0000:00:01.0
PM: Adding info for pci:0000:00:01.1
PM: Adding info for pci:0000:00:01.2
PM: Adding info for pci:0000:00:01.3
PM: Adding info for pci:0000:00:02.0
PM: Adding info for pci:0000:00:02.1
PM: Adding info for pci:0000:00:04.0
PM: Adding info for pci:0000:00:04.1
PM: Adding info for pci:0000:00:06.0
PM: Adding info for pci:0000:00:07.0
PM: Adding info for pci:0000:00:08.0
PM: Adding info for pci:0000:00:09.0
PM: Adding info for pci:0000:00:0a.0
PM: Adding info for pci:0000:00:0c.0
PM: Adding info for pci:0000:00:0d.0
PM: Adding info for pci:0000:00:12.0
PM: Adding info for pci:0000:00:18.0
PM: Adding info for pci:0000:00:18.1
PM: Adding info for pci:0000:00:18.2
PM: Adding info for pci:0000:00:18.3
PM: Adding info for pci:0000:02:05.0
PM: Adding info for pci:0000:02:05.1
PM: Adding info for pci:0000:02:05.2
PM: Adding info for pci:0000:02:05.3
PM: Adding info for pci:0000:02:05.4
PM: Adding info for No Bus:0000:02
PM: Adding info for No Bus:0000:04
PM: Adding info for pci:0000:03:00.0
PM: Adding info for No Bus:0000:03
ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *10
ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11
ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled.
ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10
ACPI: PCI Interrupt Link [LSMB] (IRQs *10)
ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11
ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7
ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11
ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *10
ACPI: PCI Interrupt Link [LGPU] (IRQs 16) *10
ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled.
ACPI: PCI Interrupt Link [LSI0] (IRQs 23) *11
ACPI: PCI Interrupt Link [Z018] (IRQs 18) *5
ACPI: PCI Interrupt Link [Z019] (IRQs 22) *10
ACPI: PCI Interrupt Link [LPMU] (IRQs *11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
PM: Adding info for No Bus:pnp0
ACPI: bus type pnp registered
PM: Adding info for pnp:00:00
PM: Adding info for pnp:00:01
PM: Adding info for pnp:00:02
PM: Adding info for pnp:00:03
PM: Adding info for pnp:00:04
PM: Adding info for pnp:00:05
PM: Adding info for pnp:00:06
PM: Adding info for pnp:00:07
PM: Adding info for pnp:00:08
PM: Adding info for pnp:00:09
PM: Adding info for pnp:00:0a
PM: Adding info for pnp:00:0b
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:03: ioport range 0x1000-0x107f has been reserved
system 00:03: ioport range 0x1080-0x10ff has been reserved
system 00:03: ioport range 0x1400-0x147f has been reserved
system 00:03: ioport range 0x1480-0x14ff has been reserved
system 00:03: ioport range 0x1800-0x187f has been reserved
system 00:03: ioport range 0x1880-0x18ff has been reserved
system 00:04: ioport range 0x360-0x361 has been reserved
system 00:04: ioport range 0x4d0-0x4d1 has been reserved
system 00:0b: iomem range 0xffc00000-0xffffffff could not be reserved
system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:0b: iomem range 0xfed00000-0xfed00fff has been reserved
system 00:0b: iomem range 0xfef00000-0xfef00fff has been reserved
PM: Adding info for No Bus:mem
PM: Adding info for No Bus:null
PM: Adding info for No Bus:port
PM: Adding info for No Bus:zero
PM: Adding info for No Bus:full
PM: Adding info for No Bus:random
PM: Adding info for No Bus:urandom
PM: Adding info for No Bus:kmsg
PM: Adding info for No Bus:lo
pci 0000:00:08.0: PCI bridge, secondary bus 0000:02
pci 0000:00:08.0:   IO window: disabled
pci 0000:00:08.0:   MEM window: 0xf6100000-0xf61fffff
pci 0000:00:08.0:   PREFETCH window: disabled
pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:0c.0:   IO window: 0x4000-0x4fff
pci 0000:00:0c.0:   MEM window: 0xf2000000-0xf3ffffff
pci 0000:00:0c.0:   PREFETCH window: 0x000000f0000000-0x000000f1ffffff
pci 0000:00:0d.0: PCI bridge, secondary bus 0000:03
pci 0000:00:0d.0:   IO window: disabled
pci 0000:00:0d.0:   MEM window: 0xf6000000-0xf60fffff
pci 0000:00:0d.0:   PREFETCH window: disabled
pci 0000:00:08.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci 0000:00:0d.0: setting latency timer to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 418k freed
Simple Boot Flag at 0x36 set to 0x80
PM: Adding info for No Bus:mcelog
PM: Adding info for platform:pcspkr
PM: Adding info for No Bus:snapshot
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7392
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler bfq registered
pci 0000:00:12.0: Boot video device
pcieport-driver 0000:00:0c.0: setting latency timer to 64
pcieport-driver 0000:00:0c.0: found MSI capability
pci_express 0000:00:0c.0:pcie00: allocate port service
PM: Adding info for pci_express:0000:00:0c.0:pcie00
pci_express 0000:00:0c.0:pcie03: allocate port service
PM: Adding info for pci_express:0000:00:0c.0:pcie03
pcieport-driver 0000:00:0d.0: setting latency timer to 64
pcieport-driver 0000:00:0d.0: found MSI capability
pci_express 0000:00:0d.0:pcie00: allocate port service
PM: Adding info for pci_express:0000:00:0d.0:pcie00
pci_express 0000:00:0d.0:pcie03: allocate port service
PM: Adding info for pci_express:0000:00:0d.0:pcie03
PM: Adding info for No Bus:fbcon
PM: Adding info for platform:vesafb.0
PM: Adding info for No Bus:ACAD
ACPI: AC Adapter [ACAD] (on-line)
PM: Adding info for No Bus:BAT0
ACPI: Battery Slot [BAT0] (battery present)
PM: Adding info for No Bus:tty
PM: Adding info for No Bus:console
PM: Adding info for No Bus:ptmx
PM: Adding info for No Bus:tty0
PM: Adding info for No Bus:vcs
PM: Adding info for No Bus:vcsa
PM: Adding info for No Bus:tty1
PM: Adding info for No Bus:tty2
PM: Adding info for No Bus:tty3
PM: Adding info for No Bus:tty4
PM: Adding info for No Bus:tty5
PM: Adding info for No Bus:tty6
PM: Adding info for No Bus:tty7
PM: Adding info for No Bus:tty8
PM: Adding info for No Bus:tty9
PM: Adding info for No Bus:tty10
PM: Adding info for No Bus:tty11
PM: Adding info for No Bus:tty12
PM: Adding info for No Bus:tty13
PM: Adding info for No Bus:tty14
PM: Adding info for No Bus:tty15
PM: Adding info for No Bus:tty16
PM: Adding info for No Bus:tty17
PM: Adding info for No Bus:tty18
PM: Adding info for No Bus:tty19
PM: Adding info for No Bus:tty20
PM: Adding info for No Bus:tty21
PM: Adding info for No Bus:tty22
PM: Adding info for No Bus:tty23
PM: Adding info for No Bus:tty24
PM: Adding info for No Bus:tty25
PM: Adding info for No Bus:tty26
PM: Adding info for No Bus:tty27
PM: Adding info for No Bus:tty28
PM: Adding info for No Bus:tty29
PM: Adding info for No Bus:tty30
PM: Adding info for No Bus:tty31
PM: Adding info for No Bus:tty32
PM: Adding info for No Bus:tty33
PM: Adding info for No Bus:tty34
PM: Adding info for No Bus:tty35
PM: Adding info for No Bus:tty36
PM: Adding info for No Bus:tty37
PM: Adding info for No Bus:tty38
PM: Adding info for No Bus:tty39
PM: Adding info for No Bus:tty40
PM: Adding info for No Bus:tty41
PM: Adding info for No Bus:tty42
PM: Adding info for No Bus:tty43
PM: Adding info for No Bus:tty44
PM: Adding info for No Bus:tty45
PM: Adding info for No Bus:tty46
PM: Adding info for No Bus:tty47
PM: Adding info for No Bus:tty48
PM: Adding info for No Bus:tty49
PM: Adding info for No Bus:tty50
PM: Adding info for No Bus:tty51
PM: Adding info for No Bus:tty52
PM: Adding info for No Bus:tty53
PM: Adding info for No Bus:tty54
PM: Adding info for No Bus:tty55
PM: Adding info for No Bus:tty56
PM: Adding info for No Bus:tty57
PM: Adding info for No Bus:tty58
PM: Adding info for No Bus:tty59
PM: Adding info for No Bus:tty60
PM: Adding info for No Bus:tty61
PM: Adding info for No Bus:tty62
PM: Adding info for No Bus:tty63
Linux agpgart interface v0.103
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
PM: Adding info for platform:serial8250
PM: Adding info for No Bus:ttyS0
PM: Adding info for No Bus:ttyS1
PM: Adding info for No Bus:ttyS2
PM: Adding info for No Bus:ttyS3
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
PM: Adding info for platform:i8042
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
PM: Adding info for No Bus:mice
PM: Adding info for No Bus:psaux
mice: PS/2 mouse device common for all mice
PM: Adding info for No Bus:hwmon0
EDAC MC: Ver: 2.1.0 Aug 22 2008
PM: Adding info for serio:serio0
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
PM: Adding info for No Bus:cpu_dma_latency
PM: Adding info for No Bus:network_latency
PM: Adding info for No Bus:network_throughput
PM: Resume from partition swap:/dev/sda5
PM: Checking hibernation image.
PM: Error -6 checking image file
PM: Resume from disk failed.
registered taskstats version 1
  Magic number: 4:570:842
PM: Adding info for No Bus:input0
input: AT Translated Set 2 keyboard as /class/input/input0
PM: Adding info for serio:serio1
Freeing unused kernel memory: 328k freed
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
pata_acpi 0000:00:06.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23
pata_acpi 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23
pata_acpi 0000:00:09.0: setting latency timer to 64
pata_acpi 0000:00:09.0: PCI INT A disabled
pata_amd 0000:00:06.0: version 0.3.10
pata_amd 0000:00:06.0: setting latency timer to 64
scsi0 : pata_amd
PM: Adding info for No Bus:host0
PM: Adding info for No Bus:host0
scsi1 : pata_amd
PM: Adding info for No Bus:host1
PM: Adding info for No Bus:host1
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
ata1.00: ATAPI: PIONEER DVDRW  DR-KD08HB, 1K09, max MWDMA2
ata1: nv_mode_filter: 0x39f&0x39f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12)
ata1.00: configured for MWDMA2
ata2: port disabled. ignoring.
scsi 0:0:0:0: CD-ROM            PIONEER  DVDRW  DR-KD08HB 1K09 PQ: 0 ANSI: 5
PM: Adding info for No Bus:target0:0:0
PM: Adding info for scsi:0:0:0:0
PM: Adding info for No Bus:0:0:0:0
PM: Adding info for No Bus:0:0:0:0
ahci 0000:00:09.0: version 3.0
ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23
ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio slum part 
ahci 0000:00:09.0: setting latency timer to 64
scsi2 : ahci
PM: Adding info for No Bus:host2
PM: Adding info for No Bus:host2
scsi3 : ahci
PM: Adding info for No Bus:host3
PM: Adding info for No Bus:host3
scsi4 : ahci
PM: Adding info for No Bus:host4
PM: Adding info for No Bus:host4
scsi5 : ahci
PM: Adding info for No Bus:host5
PM: Adding info for No Bus:host5
ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 23
ata4: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484180 irq 23
ata5: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484200 irq 23
ata6: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484280 irq 23
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-8: WDC WD2500BEVS-60UST0, 01.01A01, max UDMA/100
ata3.00: 488397168 sectors, multi 16: LBA48 
ata3.00: configured for UDMA/100
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access     ATA      WDC WD2500BEVS-6 01.0 PQ: 0 ANSI: 5
PM: Adding info for No Bus:target2:0:0
PM: Adding info for scsi:2:0:0:0
PM: Adding info for No Bus:2:0:0:0
PM: Adding info for No Bus:2:0:0:0
Driver 'sr' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
PM: Adding info for No Bus:sr0
PM: Adding info for No Bus:11:0
sr 0:0:0:0: Attached scsi CD-ROM sr0
PM: Adding info for No Bus:2:0:0:0
sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
PM: Adding info for No Bus:sda
sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
PM: Adding info for No Bus:sda1
PM: Adding info for No Bus:sda2
PM: Adding info for No Bus:sda3
PM: Adding info for No Bus:sda4
PM: Adding info for No Bus:sda5
PM: Adding info for No Bus:sda6
PM: Adding info for No Bus:8:0
sd 2:0:0:0: [sda] Attached SCSI disk
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Adding info for No Bus:rtc0
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, hpet irqs
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
forcedeth 0000:00:0a.0: setting latency timer to 64
PM: Adding info for No Bus:eth0
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1e:68:7f:95:d6
forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq lnktim msi desc-v3
PM: Adding info for No Bus:timer
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:07.0: setting latency timer to 64
PM: Adding info for No Bus:seq
PM: Adding info for No Bus:sequencer
PM: Adding info for No Bus:sequencer2
PM: Adding info for No Bus:pcmC0D1p
PM: Adding info for No Bus:adsp
PM: Adding info for No Bus:pcmC0D0p
PM: Adding info for No Bus:pcmC0D0c
PM: Adding info for No Bus:dsp
PM: Adding info for No Bus:audio
PM: Adding info for No Bus:hwC0D0
PM: Adding info for No Bus:controlC0
PM: Adding info for No Bus:mixer
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
PM: Adding info for No Bus:cooling_device0
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
PM: Adding info for No Bus:cooling_device1
processor ACPI0007:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.20.00)
powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x12
powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x13
powernow-k8:    2 : fid 0x8 (1600 MHz), vid 0x14
powernow-k8:    3 : fid 0x0 (800 MHz), vid 0x1e
PM: Adding info for No Bus:input1
input: Power Button (FF) as /class/input/input1
ACPI: Power Button (FF) [PWRF]
PM: Adding info for No Bus:input2
input: Sleep Button (CM) as /class/input/input2
ACPI: Sleep Button (CM) [SLPB]
PM: Adding info for No Bus:input3
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [LID]
PM: Adding info for No Bus:input4
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
PM: Adding info for No Bus:event0
PM: Adding info for No Bus:event1
ACPI Exception (thermal-0377): AE_OK, No or invalid critical threshold [20080609]
PM: Adding info for No Bus:event2
PM: Adding info for No Bus:event3
PM: Adding info for No Bus:event4
PM: Adding info for No Bus:sg0
sr 0:0:0:0: Attached scsi generic sg0 type 5
PM: Adding info for No Bus:sg1
sd 2:0:0:0: Attached scsi generic sg1 type 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
PM: Adding info for No Bus:usb_host1
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 18, io mem 0xf6486000
PM: Adding info for usb:usb1
usb usb1: configuration #1 chosen from 1 choice
PM: Adding info for usb:1-0:1.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 7 ports detected
PM: Adding info for No Bus:usbdev1.1_ep81
PM: Adding info for No Bus:usbdev1.1
PM: Adding info for No Bus:usbdev1.1_ep00
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
PM: Adding info for No Bus:usb_host2
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6489000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
PM: Adding info for usb:usb2
usb usb2: configuration #1 chosen from 1 choice
PM: Adding info for usb:2-0:1.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 7 ports detected
ACPI: WMI: Mapper loaded
PM: Adding info for No Bus:usbdev2.1_ep81
PM: Adding info for No Bus:usbdev2.1
PM: Adding info for No Bus:usbdev2.1_ep00
ACPI: PCI Interrupt Link [Z018] enabled at IRQ 18
ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z018] -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:04.0: setting latency timer to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
PM: Adding info for No Bus:usb_host3
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:04.0: irq 18, io mem 0xf6487000
PM: Adding info for usb:usb3
usb usb3: configuration #1 chosen from 1 choice
PM: Adding info for usb:3-0:1.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PM: Adding info for No Bus:acpi_video0
PM: Adding info for No Bus:acpi_video0
PM: Adding info for No Bus:cooling_device2
acpi device:25: registered as cooling_device2
PM: Adding info for No Bus:acpi_video1
PM: Adding info for No Bus:acpi_video2
PM: Adding info for No Bus:acpi_video3
PM: Adding info for No Bus:input5
input: Video Bus as /class/input/input5
PM: Adding info for No Bus:event5
ACPI: Video Device [UVGA] (multi-head: yes  rom: no  post: no)
PM: Adding info for No Bus:usbdev3.1_ep81
PM: Adding info for No Bus:usbdev3.1
PM: Adding info for No Bus:usbdev3.1_ep00
ACPI: PCI Interrupt Link [Z019] enabled at IRQ 22
ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z019] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:04.1: setting latency timer to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
PM: Adding info for No Bus:usb_host4
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:04.1: debug port 1
ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
ehci_hcd 0000:00:04.1: irq 22, io mem 0xf6489400
ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
PM: Adding info for usb:usb4
usb usb4: configuration #1 chosen from 1 choice
PM: Adding info for usb:4-0:1.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PM: Adding info for No Bus:usbdev4.1_ep81
PM: Adding info for No Bus:usbdev4.1
PM: Adding info for No Bus:usbdev4.1_ep00
nvidia: module license 'NVIDIA' taints kernel.
Symbol init_mm is marked as UNUSED, however this module is using it.
This symbol will go away in the future.
Please evalute if this is the right api to use and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion.
PM: Adding info for No Bus:input6
input: PC Speaker as /class/input/input6
PM: Adding info for No Bus:event6
usb 4-2: new high speed USB device using ehci_hcd and address 3
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
ricoh-mmc: Ricoh MMC controller found at 0000:02:05.2 [1180:0843] (rev 12)
ricoh-mmc: Controller is now disabled.
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:02:05.1: SDHCI controller found [1180:0822] (rev 22)
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7
sdhci-pci 0000:02:05.1: PCI INT B -> Link[LNK2] -> GSI 7 (level, low) -> IRQ 7
PM: Adding info for No Bus:mmc0
mmc0: SDHCI controller on PCI [0000:02:05.1] using PIO
PM: Adding info for usb:4-2
usb 4-2: configuration #1 chosen from 1 choice
PM: Adding info for usb:4-2:1.0
PM: Adding info for No Bus:usbdev4.3_ep83
PM: Adding info for usb:4-2:1.1
PM: Adding info for No Bus:usbdev4.3
PM: Adding info for No Bus:usbdev4.3_ep00
firewire_ohci 0000:02:05.0: enabling device (0100 -> 0102)
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
firewire_ohci 0000:02:05.0: PCI INT A -> Link[LNK1] -> GSI 5 (level, low) -> IRQ 5
firewire_ohci: Added fw-ohci device 0000:02:05.0, OHCI version 1.10
Linux video capture interface: v2.00
ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16
nvidia 0000:00:12.0: PCI INT A -> Link[LGPU] -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:00:12.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  177.13  Tue Jun 10 16:42:55 PDT 2008
usb 3-1: new full speed USB device using ohci_hcd and address 2
PM: Adding info for usb:3-1
usb 3-1: configuration #1 chosen from 1 choice
PM: Adding info for usb:3-1:1.0
PM: Adding info for No Bus:usbdev3.2_ep81
PM: Adding info for No Bus:usbdev3.2_ep82
PM: Adding info for No Bus:usbdev3.2_ep02
PM: Adding info for usb:3-1:1.1
PM: Adding info for No Bus:usbdev3.2_ep83
PM: Adding info for No Bus:usbdev3.2_ep03
PM: Adding info for usb:3-1:1.2
PM: Adding info for No Bus:usbdev3.2_ep84
PM: Adding info for No Bus:usbdev3.2_ep04
PM: Adding info for usb:3-1:1.3
PM: Adding info for No Bus:usbdev3.2
PM: Adding info for No Bus:usbdev3.2_ep00
uvcvideo: Found UVC 1.00 device HP Webcam (064e:a110)
PM: Adding info for No Bus:video0
PM: Adding info for No Bus:input7
input: HP Webcam as /class/input/input7
PM: Adding info for No Bus:event7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
PM: Adding info for firewire:fw0
firewire_core: created device fw0: GUID 00241b002bb40501, S400
Bluetooth: Core ver 2.12
PM: Adding info for platform:bluetooth
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
PM: Removing info for No Bus:usbdev3.2_ep83
PM: Removing info for No Bus:usbdev3.2_ep03
PM: Adding info for No Bus:usbdev3.2_ep83
PM: Adding info for No Bus:usbdev3.2_ep03
PM: Adding info for bluetooth:hci0
usbcore: registered new interface driver hci_usb
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
PM: Adding info for No Bus:input8
input: SynPS/2 Synaptics TouchPad as /class/input/input8
PM: Adding info for No Bus:mouse0
PM: Adding info for No Bus:event8
EXT3 FS on sda6, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 4883720k swap on /dev/sda5.  Priority:-1 extents:1 across:4883720k
PM: Adding info for No Bus:vcs2
PM: Adding info for No Bus:vcsa2
PM: Removing info for No Bus:vcs2
PM: Removing info for No Bus:vcsa2
PM: Adding info for No Bus:vcs2
PM: Adding info for No Bus:vcsa2
PM: Removing info for No Bus:vcs2
PM: Removing info for No Bus:vcsa2
PM: Adding info for No Bus:vcs3
PM: Adding info for No Bus:vcsa3
PM: Removing info for No Bus:vcs3
PM: Removing info for No Bus:vcsa3
PM: Adding info for No Bus:vcs3
PM: Adding info for No Bus:vcsa3
PM: Removing info for No Bus:vcs3
PM: Removing info for No Bus:vcsa3
PM: Adding info for No Bus:vcs4
PM: Adding info for No Bus:vcsa4
PM: Removing info for No Bus:vcs4
PM: Removing info for No Bus:vcsa4
PM: Adding info for No Bus:vcs4
PM: Adding info for No Bus:vcsa4
PM: Removing info for No Bus:vcs4
PM: Removing info for No Bus:vcsa4
PM: Adding info for No Bus:vcs5
PM: Adding info for No Bus:vcsa5
PM: Removing info for No Bus:vcs5
PM: Removing info for No Bus:vcsa5
PM: Adding info for No Bus:vcs5
PM: Adding info for No Bus:vcsa5
PM: Removing info for No Bus:vcs5
PM: Removing info for No Bus:vcsa5
PM: Adding info for No Bus:vcs6
PM: Adding info for No Bus:vcsa6
PM: Removing info for No Bus:vcs6
PM: Removing info for No Bus:vcsa6
PM: Adding info for No Bus:vcs6
PM: Adding info for No Bus:vcsa6
PM: Removing info for No Bus:vcs6
PM: Removing info for No Bus:vcsa6
PM: Adding info for No Bus:vcs7
PM: Adding info for No Bus:vcsa7
PM: Removing info for No Bus:vcs7
PM: Removing info for No Bus:vcsa7
PM: Adding info for No Bus:vcs7
PM: Adding info for No Bus:vcsa7
PM: Removing info for No Bus:vcs7
PM: Removing info for No Bus:vcsa7
PM: Adding info for No Bus:vcs8
PM: Adding info for No Bus:vcsa8
PM: Removing info for No Bus:vcs8
PM: Removing info for No Bus:vcsa8
PM: Adding info for No Bus:vcs8
PM: Adding info for No Bus:vcsa8
PM: Removing info for No Bus:vcs8
PM: Removing info for No Bus:vcsa8
PM: Adding info for No Bus:vcs9
PM: Adding info for No Bus:vcsa9
PM: Removing info for No Bus:vcs9
PM: Removing info for No Bus:vcsa9
PM: Adding info for No Bus:vcs9
PM: Adding info for No Bus:vcsa9
PM: Removing info for No Bus:vcs9
PM: Removing info for No Bus:vcsa9
PM: Adding info for No Bus:vcs10
PM: Adding info for No Bus:vcsa10
PM: Removing info for No Bus:vcs10
PM: Removing info for No Bus:vcsa10
PM: Adding info for No Bus:vcs10
PM: Adding info for No Bus:vcsa10
PM: Removing info for No Bus:vcs10
PM: Removing info for No Bus:vcsa10
PM: Adding info for No Bus:vcs11
PM: Adding info for No Bus:vcsa11
PM: Removing info for No Bus:vcs11
PM: Removing info for No Bus:vcsa11
PM: Adding info for No Bus:vcs11
PM: Adding info for No Bus:vcsa11
PM: Removing info for No Bus:vcs11
PM: Removing info for No Bus:vcsa11
PM: Adding info for No Bus:vcs12
PM: Adding info for No Bus:vcsa12
PM: Removing info for No Bus:vcs12
PM: Removing info for No Bus:vcsa12
PM: Adding info for No Bus:vcs12
PM: Adding info for No Bus:vcsa12
PM: Removing info for No Bus:vcs12
PM: Removing info for No Bus:vcsa12
PM: Adding info for No Bus:vcs13
PM: Adding info for No Bus:vcsa13
PM: Removing info for No Bus:vcs13
PM: Removing info for No Bus:vcsa13
PM: Adding info for No Bus:vcs13
PM: Adding info for No Bus:vcsa13
PM: Removing info for No Bus:vcs13
PM: Removing info for No Bus:vcsa13
PM: Adding info for No Bus:vcs14
PM: Adding info for No Bus:vcsa14
PM: Removing info for No Bus:vcs14
PM: Removing info for No Bus:vcsa14
PM: Adding info for No Bus:vcs14
PM: Adding info for No Bus:vcsa14
PM: Removing info for No Bus:vcs14
PM: Removing info for No Bus:vcsa14
PM: Adding info for No Bus:vcs15
PM: Adding info for No Bus:vcsa15
PM: Removing info for No Bus:vcs15
PM: Removing info for No Bus:vcsa15
PM: Adding info for No Bus:vcs15
PM: Adding info for No Bus:vcsa15
PM: Removing info for No Bus:vcs15
PM: Removing info for No Bus:vcsa15
PM: Adding info for No Bus:vcs16
PM: Adding info for No Bus:vcsa16
PM: Removing info for No Bus:vcs16
PM: Removing info for No Bus:vcsa16
PM: Adding info for No Bus:vcs16
PM: Adding info for No Bus:vcsa16
PM: Removing info for No Bus:vcs16
PM: Removing info for No Bus:vcsa16
PM: Adding info for No Bus:vcs17
PM: Adding info for No Bus:vcsa17
PM: Removing info for No Bus:vcs17
PM: Removing info for No Bus:vcsa17
PM: Adding info for No Bus:vcs17
PM: Adding info for No Bus:vcsa17
PM: Removing info for No Bus:vcs17
PM: Removing info for No Bus:vcsa17
PM: Adding info for No Bus:vcs18
PM: Adding info for No Bus:vcsa18
PM: Removing info for No Bus:vcs18
PM: Removing info for No Bus:vcsa18
PM: Adding info for No Bus:vcs18
PM: Adding info for No Bus:vcsa18
PM: Removing info for No Bus:vcs18
PM: Removing info for No Bus:vcsa18
PM: Adding info for No Bus:vcs19
PM: Adding info for No Bus:vcsa19
PM: Removing info for No Bus:vcs19
PM: Removing info for No Bus:vcsa19
PM: Adding info for No Bus:vcs19
PM: Adding info for No Bus:vcsa19
PM: Removing info for No Bus:vcs19
PM: Removing info for No Bus:vcsa19
PM: Adding info for No Bus:vcs20
PM: Adding info for No Bus:vcsa20
PM: Removing info for No Bus:vcs20
PM: Removing info for No Bus:vcsa20
PM: Adding info for No Bus:vcs20
PM: Adding info for No Bus:vcsa20
PM: Removing info for No Bus:vcs20
PM: Removing info for No Bus:vcsa20
PM: Adding info for No Bus:vcs21
PM: Adding info for No Bus:vcsa21
PM: Removing info for No Bus:vcs21
PM: Removing info for No Bus:vcsa21
PM: Adding info for No Bus:vcs21
PM: Adding info for No Bus:vcsa21
PM: Removing info for No Bus:vcs21
PM: Removing info for No Bus:vcsa21
PM: Adding info for No Bus:vcs22
PM: Adding info for No Bus:vcsa22
PM: Removing info for No Bus:vcs22
PM: Removing info for No Bus:vcsa22
PM: Adding info for No Bus:vcs22
PM: Adding info for No Bus:vcsa22
PM: Removing info for No Bus:vcs22
PM: Removing info for No Bus:vcsa22
PM: Adding info for No Bus:vcs23
PM: Adding info for No Bus:vcsa23
PM: Removing info for No Bus:vcs23
PM: Removing info for No Bus:vcsa23
PM: Adding info for No Bus:vcs23
PM: Adding info for No Bus:vcsa23
PM: Removing info for No Bus:vcs23
PM: Removing info for No Bus:vcsa23
PM: Adding info for No Bus:vcs24
PM: Adding info for No Bus:vcsa24
PM: Removing info for No Bus:vcs24
PM: Removing info for No Bus:vcsa24
PM: Adding info for No Bus:vcs24
PM: Adding info for No Bus:vcsa24
PM: Removing info for No Bus:vcs24
PM: Removing info for No Bus:vcsa24
PM: Adding info for No Bus:vcs25
PM: Adding info for No Bus:vcsa25
PM: Removing info for No Bus:vcs25
PM: Removing info for No Bus:vcsa25
PM: Adding info for No Bus:vcs25
PM: Adding info for No Bus:vcsa25
PM: Removing info for No Bus:vcs25
PM: Removing info for No Bus:vcsa25
PM: Adding info for No Bus:vcs26
PM: Adding info for No Bus:vcsa26
PM: Removing info for No Bus:vcs26
PM: Removing info for No Bus:vcsa26
PM: Adding info for No Bus:vcs26
PM: Adding info for No Bus:vcsa26
PM: Removing info for No Bus:vcs26
PM: Removing info for No Bus:vcsa26
PM: Adding info for No Bus:vcs27
PM: Adding info for No Bus:vcsa27
PM: Removing info for No Bus:vcs27
PM: Removing info for No Bus:vcsa27
PM: Adding info for No Bus:vcs27
PM: Adding info for No Bus:vcsa27
PM: Removing info for No Bus:vcs27
PM: Removing info for No Bus:vcsa27
PM: Adding info for No Bus:vcs28
PM: Adding info for No Bus:vcsa28
PM: Removing info for No Bus:vcs28
PM: Removing info for No Bus:vcsa28
PM: Adding info for No Bus:vcs28
PM: Adding info for No Bus:vcsa28
PM: Removing info for No Bus:vcs28
PM: Removing info for No Bus:vcsa28
PM: Adding info for No Bus:vcs29
PM: Adding info for No Bus:vcsa29
PM: Removing info for No Bus:vcs29
PM: Removing info for No Bus:vcsa29
PM: Adding info for No Bus:vcs29
PM: Adding info for No Bus:vcsa29
PM: Removing info for No Bus:vcs29
PM: Removing info for No Bus:vcsa29
PM: Adding info for No Bus:vcs30
PM: Adding info for No Bus:vcsa30
PM: Removing info for No Bus:vcs30
PM: Removing info for No Bus:vcsa30
PM: Adding info for No Bus:vcs30
PM: Adding info for No Bus:vcsa30
PM: Removing info for No Bus:vcs30
PM: Removing info for No Bus:vcsa30
PM: Adding info for No Bus:vcs31
PM: Adding info for No Bus:vcsa31
PM: Removing info for No Bus:vcs31
PM: Removing info for No Bus:vcsa31
PM: Adding info for No Bus:vcs31
PM: Adding info for No Bus:vcsa31
PM: Removing info for No Bus:vcs31
PM: Removing info for No Bus:vcsa31
PM: Adding info for No Bus:vcs32
PM: Adding info for No Bus:vcsa32
PM: Removing info for No Bus:vcs32
PM: Removing info for No Bus:vcsa32
PM: Adding info for No Bus:vcs32
PM: Adding info for No Bus:vcsa32
PM: Removing info for No Bus:vcs32
PM: Removing info for No Bus:vcsa32
PM: Adding info for No Bus:vcs33
PM: Adding info for No Bus:vcsa33
PM: Removing info for No Bus:vcs33
PM: Removing info for No Bus:vcsa33
PM: Adding info for No Bus:vcs33
PM: Adding info for No Bus:vcsa33
PM: Removing info for No Bus:vcs33
PM: Removing info for No Bus:vcsa33
PM: Adding info for No Bus:vcs34
PM: Adding info for No Bus:vcsa34
PM: Removing info for No Bus:vcs34
PM: Removing info for No Bus:vcsa34
PM: Adding info for No Bus:vcs34
PM: Adding info for No Bus:vcsa34
PM: Removing info for No Bus:vcs34
PM: Removing info for No Bus:vcsa34
PM: Adding info for No Bus:vcs35
PM: Adding info for No Bus:vcsa35
PM: Removing info for No Bus:vcs35
PM: Removing info for No Bus:vcsa35
PM: Adding info for No Bus:vcs35
PM: Adding info for No Bus:vcsa35
PM: Removing info for No Bus:vcs35
PM: Removing info for No Bus:vcsa35
PM: Adding info for No Bus:vcs36
PM: Adding info for No Bus:vcsa36
PM: Removing info for No Bus:vcs36
PM: Removing info for No Bus:vcsa36
PM: Adding info for No Bus:vcs36
PM: Adding info for No Bus:vcsa36
PM: Removing info for No Bus:vcs36
PM: Removing info for No Bus:vcsa36
PM: Adding info for No Bus:vcs37
PM: Adding info for No Bus:vcsa37
PM: Removing info for No Bus:vcs37
PM: Removing info for No Bus:vcsa37
PM: Adding info for No Bus:vcs37
PM: Adding info for No Bus:vcsa37
PM: Removing info for No Bus:vcs37
PM: Removing info for No Bus:vcsa37
PM: Adding info for No Bus:vcs38
PM: Adding info for No Bus:vcsa38
PM: Removing info for No Bus:vcs38
PM: Removing info for No Bus:vcsa38
PM: Adding info for No Bus:vcs38
PM: Adding info for No Bus:vcsa38
PM: Removing info for No Bus:vcs38
PM: Removing info for No Bus:vcsa38
PM: Adding info for No Bus:vcs39
PM: Adding info for No Bus:vcsa39
PM: Removing info for No Bus:vcs39
PM: Removing info for No Bus:vcsa39
PM: Adding info for No Bus:vcs39
PM: Adding info for No Bus:vcsa39
PM: Removing info for No Bus:vcs39
PM: Removing info for No Bus:vcsa39
PM: Adding info for No Bus:vcs40
PM: Adding info for No Bus:vcsa40
PM: Removing info for No Bus:vcs40
PM: Removing info for No Bus:vcsa40
PM: Adding info for No Bus:vcs40
PM: Adding info for No Bus:vcsa40
PM: Removing info for No Bus:vcs40
PM: Removing info for No Bus:vcsa40
PM: Adding info for No Bus:vcs41
PM: Adding info for No Bus:vcsa41
PM: Removing info for No Bus:vcs41
PM: Removing info for No Bus:vcsa41
PM: Adding info for No Bus:vcs41
PM: Adding info for No Bus:vcsa41
PM: Removing info for No Bus:vcs41
PM: Removing info for No Bus:vcsa41
PM: Adding info for No Bus:vcs42
PM: Adding info for No Bus:vcsa42
PM: Removing info for No Bus:vcs42
PM: Removing info for No Bus:vcsa42
PM: Adding info for No Bus:vcs42
PM: Adding info for No Bus:vcsa42
PM: Removing info for No Bus:vcs42
PM: Removing info for No Bus:vcsa42
PM: Adding info for No Bus:vcs43
PM: Adding info for No Bus:vcsa43
PM: Removing info for No Bus:vcs43
PM: Removing info for No Bus:vcsa43
PM: Adding info for No Bus:vcs43
PM: Adding info for No Bus:vcsa43
PM: Removing info for No Bus:vcs43
PM: Removing info for No Bus:vcsa43
PM: Adding info for No Bus:vcs44
PM: Adding info for No Bus:vcsa44
PM: Removing info for No Bus:vcs44
PM: Removing info for No Bus:vcsa44
PM: Adding info for No Bus:vcs44
PM: Adding info for No Bus:vcsa44
PM: Removing info for No Bus:vcs44
PM: Removing info for No Bus:vcsa44
PM: Adding info for No Bus:vcs45
PM: Adding info for No Bus:vcsa45
PM: Removing info for No Bus:vcs45
PM: Removing info for No Bus:vcsa45
PM: Adding info for No Bus:vcs45
PM: Adding info for No Bus:vcsa45
PM: Removing info for No Bus:vcs45
PM: Removing info for No Bus:vcsa45
PM: Adding info for No Bus:vcs46
PM: Adding info for No Bus:vcsa46
PM: Removing info for No Bus:vcs46
PM: Removing info for No Bus:vcsa46
PM: Adding info for No Bus:vcs46
PM: Adding info for No Bus:vcsa46
PM: Removing info for No Bus:vcs46
PM: Removing info for No Bus:vcsa46
PM: Adding info for No Bus:vcs47
PM: Adding info for No Bus:vcsa47
PM: Removing info for No Bus:vcs47
PM: Removing info for No Bus:vcsa47
PM: Adding info for No Bus:vcs47
PM: Adding info for No Bus:vcsa47
PM: Removing info for No Bus:vcs47
PM: Removing info for No Bus:vcsa47
PM: Adding info for No Bus:vcs48
PM: Adding info for No Bus:vcsa48
PM: Removing info for No Bus:vcs48
PM: Removing info for No Bus:vcsa48
PM: Adding info for No Bus:vcs48
PM: Adding info for No Bus:vcsa48
PM: Removing info for No Bus:vcs48
PM: Removing info for No Bus:vcsa48
PM: Adding info for No Bus:vcs49
PM: Adding info for No Bus:vcsa49
PM: Removing info for No Bus:vcs49
PM: Removing info for No Bus:vcsa49
PM: Adding info for No Bus:vcs49
PM: Adding info for No Bus:vcsa49
PM: Removing info for No Bus:vcs49
PM: Removing info for No Bus:vcsa49
PM: Adding info for No Bus:vcs50
PM: Adding info for No Bus:vcsa50
PM: Removing info for No Bus:vcs50
PM: Removing info for No Bus:vcsa50
PM: Adding info for No Bus:vcs50
PM: Adding info for No Bus:vcsa50
PM: Removing info for No Bus:vcs50
PM: Removing info for No Bus:vcsa50
PM: Adding info for No Bus:vcs51
PM: Adding info for No Bus:vcsa51
PM: Removing info for No Bus:vcs51
PM: Removing info for No Bus:vcsa51
PM: Adding info for No Bus:vcs51
PM: Adding info for No Bus:vcsa51
PM: Removing info for No Bus:vcs51
PM: Removing info for No Bus:vcsa51
PM: Adding info for No Bus:vcs52
PM: Adding info for No Bus:vcsa52
PM: Removing info for No Bus:vcs52
PM: Removing info for No Bus:vcsa52
PM: Adding info for No Bus:vcs52
PM: Adding info for No Bus:vcsa52
PM: Removing info for No Bus:vcs52
PM: Removing info for No Bus:vcsa52
PM: Adding info for No Bus:vcs53
PM: Adding info for No Bus:vcsa53
PM: Removing info for No Bus:vcs53
PM: Removing info for No Bus:vcsa53
PM: Adding info for No Bus:vcs53
PM: Adding info for No Bus:vcsa53
PM: Removing info for No Bus:vcs53
PM: Removing info for No Bus:vcsa53
PM: Adding info for No Bus:vcs54
PM: Adding info for No Bus:vcsa54
PM: Removing info for No Bus:vcs54
PM: Removing info for No Bus:vcsa54
PM: Adding info for No Bus:vcs54
PM: Adding info for No Bus:vcsa54
PM: Removing info for No Bus:vcs54
PM: Removing info for No Bus:vcsa54
PM: Adding info for No Bus:vcs55
PM: Adding info for No Bus:vcsa55
PM: Removing info for No Bus:vcs55
PM: Removing info for No Bus:vcsa55
PM: Adding info for No Bus:vcs55
PM: Adding info for No Bus:vcsa55
PM: Removing info for No Bus:vcs55
PM: Removing info for No Bus:vcsa55
PM: Adding info for No Bus:vcs56
PM: Adding info for No Bus:vcsa56
PM: Removing info for No Bus:vcs56
PM: Removing info for No Bus:vcsa56
PM: Adding info for No Bus:vcs56
PM: Adding info for No Bus:vcsa56
PM: Removing info for No Bus:vcs56
PM: Removing info for No Bus:vcsa56
PM: Adding info for No Bus:vcs57
PM: Adding info for No Bus:vcsa57
PM: Removing info for No Bus:vcs57
PM: Removing info for No Bus:vcsa57
PM: Adding info for No Bus:vcs57
PM: Adding info for No Bus:vcsa57
PM: Removing info for No Bus:vcs57
PM: Removing info for No Bus:vcsa57
PM: Adding info for No Bus:vcs58
PM: Adding info for No Bus:vcsa58
PM: Removing info for No Bus:vcs58
PM: Removing info for No Bus:vcsa58
PM: Adding info for No Bus:vcs58
PM: Adding info for No Bus:vcsa58
PM: Removing info for No Bus:vcs58
PM: Removing info for No Bus:vcsa58
PM: Adding info for No Bus:vcs59
PM: Adding info for No Bus:vcsa59
PM: Removing info for No Bus:vcs59
PM: Removing info for No Bus:vcsa59
PM: Adding info for No Bus:vcs59
PM: Adding info for No Bus:vcsa59
PM: Removing info for No Bus:vcs59
PM: Removing info for No Bus:vcsa59
PM: Adding info for No Bus:vcs60
PM: Adding info for No Bus:vcsa60
PM: Removing info for No Bus:vcs60
PM: Removing info for No Bus:vcsa60
PM: Adding info for No Bus:vcs60
PM: Adding info for No Bus:vcsa60
PM: Removing info for No Bus:vcs60
PM: Removing info for No Bus:vcsa60
PM: Adding info for No Bus:vcs61
PM: Adding info for No Bus:vcsa61
PM: Removing info for No Bus:vcs61
PM: Removing info for No Bus:vcsa61
PM: Adding info for No Bus:vcs61
PM: Adding info for No Bus:vcsa61
PM: Removing info for No Bus:vcs61
PM: Removing info for No Bus:vcsa61
PM: Adding info for No Bus:vcs62
PM: Adding info for No Bus:vcsa62
PM: Removing info for No Bus:vcs62
PM: Removing info for No Bus:vcsa62
PM: Adding info for No Bus:vcs62
PM: Adding info for No Bus:vcsa62
PM: Removing info for No Bus:vcs62
PM: Removing info for No Bus:vcsa62
PM: Adding info for No Bus:vcs63
PM: Adding info for No Bus:vcsa63
PM: Removing info for No Bus:vcs63
PM: Removing info for No Bus:vcsa63
PM: Adding info for No Bus:vcs63
PM: Adding info for No Bus:vcsa63
PM: Removing info for No Bus:vcs63
PM: Removing info for No Bus:vcsa63
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
eth0: no link during initialization.
eth0: link up.
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Adding info for No Bus:vcs2
PM: Adding info for No Bus:vcsa2
PM: Adding info for No Bus:vcs7
PM: Adding info for No Bus:vcsa7
PM: Removing info for No Bus:vcs7
PM: Removing info for No Bus:vcsa7
PM: Adding info for No Bus:vcs7
PM: Adding info for No Bus:vcsa7
PM: Adding info for No Bus:i2c-0
PM: Adding info for No Bus:i2c-1
PM: Adding info for No Bus:i2c-2
PM: Adding info for No Bus:i2c-3
Clocksource tsc unstable (delta = -85857543 ns)
fuse init (API version 7.9)
PM: Adding info for No Bus:fuse
PM: Adding info for No Bus:8:2-fuseblk
PM: Adding info for No Bus:8:1-fuseblk

here is the webcam part:

uvcvideo: Found UVC 1.00 device HP Webcam (064e:a110)
PM: Adding info for No Bus:video0
PM: Adding info for No Bus:input7
input: HP Webcam as /class/input/input7
PM: Adding info for No Bus:event7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)

and some video part:

input: Video Bus as /class/input/input5
PM: Adding info for No Bus:event5
ACPI: Video Device [UVGA] (multi-head: yes  rom: no  post: no)

When I tried to use eikga, I used the setting of v4l2... but I'll research that some more to see if I need to use a different setting...

This is the webcam (ID 064e:a110 Suyin Corp), and it's listed on the uvc webpage: http://linux-uvc.berlios.de/

064e:a110      HP Webcam (HP TX2000 notebooks)      SuYin

This is part of my config.saved.x86_64 for my zenmm kernel that I'm using:

#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_DVB_CORE=m
CONFIG_VIDEO_MEDIA=m

and:

#
# Multimedia drivers
#
....
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
....
#

I have compiled the modules, maybe I should try compiling them as "y" instead of "m"...just to try?

Or maybe if I can't get the integrated microphone to work correctly, then maybe I could buy a plug in microphone that is known to work with linux (so I can use voip/skype phone). That's what I did for my wifi since my 64bit Broadcom pre-N wasn't supported yet with b43 or ndiswrapper.

Arch Linux

#1 2008-08-28 20:52:44

Problems with cheese...

#2 2008-08-28 21:08:06

Re: Problems with cheese...

#3 2008-08-28 21:12:34

Re: Problems with cheese...

#4 2008-08-28 22:47:36

Re: Problems with cheese...

#5 2008-08-28 23:39:48

Re: Problems with cheese...

#6 2008-08-29 13:48:14

Re: Problems with cheese...

#7 2008-08-29 20:30:00

Re: Problems with cheese...

Board footer