You are not logged in.
- Topics: Active | Unanswered
#1 2008-12-13 23:26:55
- Slurp
- Member
- From: Madrid, Spain
- Registered: 2008-09-02
- Posts: 124
[SOLVED] More Xorg Vs. Synaptics
Hi, I hope someone can help. My touchpad doesn't work at all. It did before Xorg update but now doesn't, even after following the wiki and some threads on this forum and I cannot find what i'm doing wrong. The facts:
1. I have a two years old Dell Inspiron 6400.
2. If I disable hotplugging everything works as before, that means no multimedia keys, and now I'm pretty happy with them.
3. I didn't have the /usr/share/hal/fdi/policy/10osvendor/11-x11-synaptics.fdi file so I copied it to/etc/hal/fdi/policy/10osvendor/11-x11-synaptics.fdi from here and here, as said in the wiki, none worked.
4.
## /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "aticonfig-Screen[0]-0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
# InputDevice "SynapticsTouchpad" "SendCoreEvents"
EndSection
Section "Files"
## RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dbe"
Load "xtrap"
Load "extmod"
Load "dri"
Load "record"
Load "freetype"
Load "glx"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "Xdbmodel" "inspiron"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
#Section "InputDevice"
# Identifier "SynapticsTouchpad"
# Driver "synaptics"
#Option "AlwaysCore" "true" # send events to CorePointer
#Option "Device" "/dev/input/mice"
# Option "Device" "/dev/psaux"
# Option "Protocol" "auto-dev"
# Option "SHMConfig" "false" # configurable at runtime? security risk
# Option "LeftEdge" "1700" # x coord left
# Option "RightEdge" "5300" # x coord right
# Option "TopEdge" "1700" # y coord top
# Option "BottomEdge" "4200" # y coord bottom
# Option "FingerLow" "05" # pressure below this level triggers release
# Option "FingerHigh" "10" # pressure above this level triggers touch
# Option "MaxTapTime" "180" # max time in ms for detecting tap
# Option "VertEdgeScroll" "true" # enable vertical scroll zone
# Option "HorizEdgeScroll" "true" # enable horizontal scroll zone
# Option "CornerCoasting" "true" # enable continuous scroll with finger in corner
# Option "CoastingSpeed" "0.30" # corner coasting speed
# Option "VertScrollDelta" "100" # edge-to-edge scroll distance of the vertical scroll
# Option "HorizScrollDelta" "100" # edge-to-edge scroll distance of the horizontal scroll
# Option "MinSpeed" "0.10" # speed factor for low pointer movement
# Option "MaxSpeed" "0.60" # maximum speed factor for fast pointer movement
# Option "AccelFactor" "0.0020" # acceleration factor for normal pointer movements
# Option "VertTwoFingerScroll" "true" # vertical scroll anywhere with two fingers
# Option "HorizTwoFingerScroll" "true" # horizontal scroll anywhere with two fingers
#EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
HorizSync 30.0 - 30.0
VertRefresh 50.0 - 100.0
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "vesa"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility X1400"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection5. Anymore information needed?
Thanks in advance.
Last edited by Slurp (2008-12-14 19:53:27)
Stop the world, I get off...
Offline
#2 2008-12-14 01:24:44
- allbluedream
- Member
- Registered: 2008-04-06
- Posts: 155
Re: [SOLVED] More Xorg Vs. Synaptics
Downgrade xf86-input-synaptics to synaptics. This is the most trouble-free method IMO.
Offline
#3 2008-12-14 02:02:16
- pointone
- Wiki Admin
- From: Waterloo, ON
- Registered: 2008-02-21
- Posts: 379
Re: [SOLVED] More Xorg Vs. Synaptics
I've got the same laptop working fine with input hotplugging. It seems you missed the point of input hotplugging--you don't need to specify your input devices in xorg.conf anymore.
Here's my xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
EndSection
Section "Module"
Load "xtrap"
Load "extmod"
Load "glx"
Load "dri"
Load "GLcore"
Load "dbe"
Load "freetype"
Load "synaptics"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "fglrx"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility X1400"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection... and 11-x11-synaptics.fdi:
<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2">
<device>
<match key="info.capabilities" contains="input.touchpad">
<match key="info.product" contains="Synaptics TouchPad">
<merge key="input.x11_driver" type="string">synaptics</merge>
<!-- Arbitrary options can be passed to the driver using
the input.x11_options property since xorg-server-1.5. -->
<!-- EXAMPLE:
<merge key="input.x11_options.LeftEdge" type="string">120</merge>
-->
</match>
<match key="info.product" contains="AlpsPS/2 ALPS">
<merge key="input.x11_driver" type="string">synaptics</merge>
</match>
<match key="info.product" contains="appletouch">
<merge key="input.x11_driver" type="string">synaptics</merge>
</match>
<match key="info.product" contains="bcm5974">
<merge key="input.x11_driver" type="string">synaptics</merge>
</match>
<!-- <merge key="input.x11_options.protocol" type="string">event</merge>
<merge key="input.x11_options.touchpadoff" type="string">0</merge>
<merge key="input.x11_options.shmconfig" type="string">on</merge> -->
<merge key="input.x11_options.TapButton1" type="string">1</merge>
<merge key="input.x11_options.TapButton2" type="string">2</merge>
<!-- <merge key="input.x11_options.TapButton3" type="string">3</merge> -->
<merge key="input.x11_options.vertedgescroll" type="string">true</merge>
<merge key="input.x11_options.horizedgescroll" type="string">true</merge>
<!--<merge key="input.x11_options.RightEdge" type="string">930</merge>
<merge key="input.x11_options.BottomEdge" type="string">700</merge>
<merge key="input.x11_options.VertTwoFingerScroll" type="string">true</merge>
<merge key="input.x11_options.HorizTwoFingerScroll" type="string">true</merge>
<merge key="input.x11_options.HorizScrollDelta" type="string">20</merge> -->
</match>
</device>
</deviceinfo>M*cr*s*ft: Who needs quality when you have marketing?
Offline
#4 2008-12-14 11:39:59
- Slurp
- Member
- From: Madrid, Spain
- Registered: 2008-09-02
- Posts: 124
Re: [SOLVED] More Xorg Vs. Synaptics
Well, thanks both. By now I only tried pointone solution... but it didn't solve neither screw up anything.
May the problem be in my rc.conf?
#
# /etc/rc.conf - Main Configuration for Arch Linux
#
# -----------------------------------------------------------------------
# LOCALIZATION
# -----------------------------------------------------------------------
#
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
#
LOCALE="es_ES.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Europe/Madrid"
KEYMAP="es.map.gz"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# -----------------------------------------------------------------------
# HARDWARE
# -----------------------------------------------------------------------
#
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
#
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
#
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(b44 mii iwl3945 fglrx snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel
soundcore i8k acpi-cpufreq cpufreq_ondemand cpufreq_powersave fuse loop !pcspkr)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# -----------------------------------------------------------------------
# NETWORKING
# -----------------------------------------------------------------------
#
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
#
HOSTNAME="pablerkas"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
#
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
#
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#
eth0=""
wlan0="dhcp"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
#
gateway="default gw 192.168.1.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
#
# Network profiles are found in /etc/network.d
#
# This now requires the netcfg package
#
#NETWORKS=(main)
# -----------------------------------------------------------------------
# DAEMONS
# -----------------------------------------------------------------------
#
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
#
DAEMONS=(syslog-ng hal @preload iptables @network @alsa @netfs @fam @wicd @laptop-mode @alunnd @crond @ntpd @portmap)And my new xorg.conf:
## /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "aticonfig-Screen[0]-0" 0 0
# InputDevice "Mouse0" "CorePointer"
# InputDevice "Keyboard0" "CoreKeyboard"
# InputDevice "SynapticsTouchpad" "SendCoreEvents"
EndSection
Section "Files"
## RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dbe"
Load "xtrap"
Load "extmod"
Load "dri"
Load "record"
Load "freetype"
Load "glx"
Load "synaptics"
EndSection
#Section "InputDevice"
# Identifier "Keyboard0"
# Driver "kbd"
# Option "Xdbmodel" "inspiron"
#EndSection
#Section "InputDevice"
# Identifier "Mouse0"
# Driver "mouse"
# Option "Protocol" "auto"
# Option "Device" "/dev/input/mice"
# Option "ZAxisMapping" "4 5 6 7"
#EndSection
#Section "InputDevice"
# Identifier "SynapticsTouchpad"
# Driver "synaptics"
#Option "AlwaysCore" "true" # send events to CorePointer
#Option "Device" "/dev/input/mice"
# Option "Device" "/dev/psaux"
# Option "Protocol" "auto-dev"
# Option "SHMConfig" "false" # configurable at runtime? security risk
# Option "LeftEdge" "1700" # x coord left
# Option "RightEdge" "5300" # x coord right
# Option "TopEdge" "1700" # y coord top
# Option "BottomEdge" "4200" # y coord bottom
# Option "FingerLow" "05" # pressure below this level triggers release
# Option "FingerHigh" "10" # pressure above this level triggers touch
# Option "MaxTapTime" "180" # max time in ms for detecting tap
# Option "VertEdgeScroll" "true" # enable vertical scroll zone
# Option "HorizEdgeScroll" "true" # enable horizontal scroll zone
# Option "CornerCoasting" "true" # enable continuous scroll with finger in corner
# Option "CoastingSpeed" "0.30" # corner coasting speed
# Option "VertScrollDelta" "100" # edge-to-edge scroll distance of the vertical scroll
# Option "HorizScrollDelta" "100" # edge-to-edge scroll distance of the horizontal scroll
# Option "MinSpeed" "0.10" # speed factor for low pointer movement
# Option "MaxSpeed" "0.60" # maximum speed factor for fast pointer movement
# Option "AccelFactor" "0.0020" # acceleration factor for normal pointer movements
# Option "VertTwoFingerScroll" "true" # vertical scroll anywhere with two fingers
# Option "HorizTwoFingerScroll" "true" # horizontal scroll anywhere with two fingers
#EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
HorizSync 30.0 - 30.0
VertRefresh 50.0 - 100.0
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "vesa"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility X1400"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSectionLast edited by Slurp (2008-12-14 11:41:33)
Stop the world, I get off...
Offline
#5 2008-12-14 17:09:35
- pointone
- Wiki Admin
- From: Waterloo, ON
- Registered: 2008-02-21
- Posts: 379
Re: [SOLVED] More Xorg Vs. Synaptics
Post your /var/log/Xorg.0.log please.
M*cr*s*ft: Who needs quality when you have marketing?
Offline
#6 2008-12-14 17:46:36
- Slurp
- Member
- From: Madrid, Spain
- Registered: 2008-09-02
- Posts: 124
Re: [SOLVED] More Xorg Vs. Synaptics
Here it is:
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux pablerkas 2.6.27-ARCH #1 SMP PREEMPT Mon Dec 8 22:01:01 UTC 2008 i686
Build Date: 05 December 2008 09:10:55PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 14 17:40:23 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "aticonfig-Screen[0]-0" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]-0"
(**) | |-->Device "aticonfig-Device[0]-0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d5900
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) ATI Technologies Inc Radeon Mobility X1400 rev 0, Mem @ 0xd0000000/0, 0xefdf0000/0, I/O @ 0x0000ee00/0, BIOS @ 0x????????/131072
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "record"
(WW) Warning, couldn't open module record
(II) UnloadModule: "record"
(EE) Failed to load module "record" (module does not exist, 0)
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "synaptics"
(WW) Warning, couldn't open module synaptics
(II) UnloadModule: "synaptics"
(EE) Failed to load module "synaptics" (module does not exist, 0)
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.56.4
Module class: X.Org Video Driver
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.56.4
(II) ATI Proprietary Linux Driver Release Identifier: 8.561
(II) ATI Proprietary Linux Driver Build Date: Dec 1 2008 14:55:43
(WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
(WW) Video driver ABI version of the X server is 4.1
(--) Chipset Supported AMD Graphics Processor (0x7145) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) fglrx(0): pEnt->device->identifier=0x8aa5490
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
(II) fglrx(0): 10BitPixelFormat disabled by default
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.56.4
ABI class: X.Org Server Extension, version 1.1
(--) fglrx(0): Chipset: "ATI Mobility Radeon X1400" (Chipset = 0x7145)
(--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x2003)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xefdf0000
(--) fglrx(0): I/O port at 0x0000ee00
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 9.12
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: M54P
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
(--) fglrx(0): Video RAM: 131072 kByte, Type: DDR2
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000002, disabled=0x00000000
(II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: SEC Model: 0 Serial#: 0
(II) fglrx(0): Year: 2006 Week: 0
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
(II) fglrx(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 71.1 MHz Image Size: 331 x 207 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) fglrx(0): v_active: 800 v_sync: 802 v_sync_end 808 v_blanking: 823 v_border: 0
(WW) fglrx(0): Unknown vendor-specific block f
(II) fglrx(0): DF056154X3
(II) fglrx(0): '@PZ °Ùÿ
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff004ca3000000000000
(II) fglrx(0): 00100103802115780a87f594574f8c27
(II) fglrx(0): 27505400000001010101010101010101
(II) fglrx(0): 010101010101c71b00a0502017303020
(II) fglrx(0): 26004bcf100000190000000f00000000
(II) fglrx(0): 00000000002387026400000000fe0044
(II) fglrx(0): 463035360331353458330a20000000fe
(II) fglrx(0): 002740505a81b0d9ff01010a2020009d
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - LCD on internal LVDS
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay version 3. 5 power states available:
(II) fglrx(0): 1. 432/396MHz @ 60Hz [enable load balancing]
(II) fglrx(0): 2. 324/135MHz @ 60Hz [low voltage, enable sleep, thermal diode mode]
(II) fglrx(0): 3. 209/135MHz @ 60Hz [low voltage, enable sleep]
(II) fglrx(0): 4. 392/252MHz @ 60Hz [enable sleep, thermal diode mode]
(II) fglrx(0): 5. 392/252MHz @ 60Hz [enable sleep]
(==) fglrx(0): QBS disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 13 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x800 (pitch 0)
(**) fglrx(0): *Mode "1280x800": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x800"x60.0 71.11 1280 1328 1360 1440 800 802 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): *Mode "1280x768": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0 71.11 1280 1328 1360 1440 768 802 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): *Mode "1280x720": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 71.11 1280 1328 1360 1440 720 802 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): *Mode "1024x768": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 71.11 1024 1328 1360 1440 768 802 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): *Mode "800x600": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 71.11 800 1328 1360 1440 600 802 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): *Mode "720x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 71.11 720 1328 1360 1440 480 802 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): *Mode "640x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 71.11 640 1328 1360 1440 480 802 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): Default mode "640x432": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x432"x60.0 71.11 640 1328 1360 1440 432 802 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): Default mode "640x400": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 71.11 640 1328 1360 1440 400 802 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): Default mode "512x384": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 71.11 512 1328 1360 1440 384 802 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): Default mode "400x300": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300"x60.0 71.11 400 1328 1360 1440 300 802 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): Default mode "320x240": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240"x60.0 71.11 320 1328 1360 1440 240 802 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): Default mode "320x200": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200"x60.0 71.11 320 1328 1360 1440 200 802 808 823 +hsync +vsync (49.4 kHz)
(--) fglrx(0): Display dimensions: (330, 210) mm
(--) fglrx(0): DPI set to (98, 96)
(--) fglrx(0): Virtual size is 1280x800 (pitch 1280)
(**) fglrx(0): *Mode "1280x800": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x800"x60.0 71.11 1280 1328 1360 1440 800 802 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): *Mode "1280x768": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0 71.11 1280 1328 1360 1440 768 802 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): *Mode "1280x720": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 71.11 1280 1328 1360 1440 720 802 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): *Mode "1024x768": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 71.11 1024 1328 1360 1440 768 802 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): *Mode "800x600": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 71.11 800 1328 1360 1440 600 802 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): *Mode "720x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 71.11 720 1328 1360 1440 480 802 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): *Mode "640x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 71.11 640 1328 1360 1440 480 802 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): Default mode "640x432": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x432"x60.0 71.11 640 1328 1360 1440 432 802 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): Default mode "640x400": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 71.11 640 1328 1360 1440 400 802 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): Default mode "512x384": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 71.11 512 1328 1360 1440 384 802 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): Default mode "400x300": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300"x60.0 71.11 400 1328 1360 1440 300 802 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): Default mode "320x240": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240"x60.0 71.11 320 1328 1360 1440 240 802 808 823 +hsync +vsync (49.4 kHz)
(**) fglrx(0): Default mode "320x200": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200"x60.0 71.11 320 1328 1360 1440 200 802 808 823 +hsync +vsync (49.4 kHz)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.2.0
ABI class: X.Org Video Driver, version 4.1
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(II) fglrx(0): [pcie] 262144 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(II) fglrx(0): Direct rendering enabled
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Interrupt handler installed at IRQ 16.
(II) fglrx(0): Exposed events to the /proc interface
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
(II) fglrx(0): detected X.org 7.4.3.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): DRIScreenInit for fglrx driver
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [drm] mapped SAREA 0x2000 to 0xb7f28000
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.56.4
(II) fglrx(0): Date: Dec 1 2008
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.27-ARCH
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0x00004000
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01004000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,3280)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,800) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 2480
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 80
(II) fglrx(0): GLESX is enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Solid Lines
Dashed Lines
Setting up tile and stipple cache:
32 128x128 slots
19 256x256 slots
5 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules//amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(WW) AIGLX: 3D driver claims to not support visual 0x33
(WW) AIGLX: 3D driver claims to not support visual 0x34
(WW) AIGLX: 3D driver claims to not support visual 0x35
(WW) AIGLX: 3D driver claims to not support visual 0x36
(WW) AIGLX: 3D driver claims to not support visual 0x37
(WW) AIGLX: 3D driver claims to not support visual 0x38
(WW) AIGLX: 3D driver claims to not support visual 0x39
(WW) AIGLX: 3D driver claims to not support visual 0x3a
(WW) AIGLX: 3D driver claims to not support visual 0x3b
(WW) AIGLX: 3D driver claims to not support visual 0x3c
(WW) AIGLX: 3D driver claims to not support visual 0x3d
(WW) AIGLX: 3D driver claims to not support visual 0x3e
(WW) AIGLX: 3D driver claims to not support visual 0x3f
(WW) AIGLX: 3D driver claims to not support visual 0x40
(WW) AIGLX: 3D driver claims to not support visual 0x41
(WW) AIGLX: 3D driver claims to not support visual 0x42
(WW) AIGLX: 3D driver claims to not support visual 0x43
(WW) AIGLX: 3D driver claims to not support visual 0x44
(WW) AIGLX: 3D driver claims to not support visual 0x45
(WW) AIGLX: 3D driver claims to not support visual 0x46
(WW) AIGLX: 3D driver claims to not support visual 0x47
(WW) AIGLX: 3D driver claims to not support visual 0x48
(WW) AIGLX: 3D driver claims to not support visual 0x49
(WW) AIGLX: 3D driver claims to not support visual 0x4a
(WW) AIGLX: 3D driver claims to not support visual 0x4b
(WW) AIGLX: 3D driver claims to not support visual 0x4c
(WW) AIGLX: 3D driver claims to not support visual 0x4d
(WW) AIGLX: 3D driver claims to not support visual 0x4e
(WW) AIGLX: 3D driver claims to not support visual 0x4f
(WW) AIGLX: 3D driver claims to not support visual 0x50
(WW) AIGLX: 3D driver claims to not support visual 0x51
(WW) AIGLX: 3D driver claims to not support visual 0x52
(WW) AIGLX: 3D driver claims to not support visual 0x53
(WW) AIGLX: 3D driver claims to not support visual 0x54
(WW) AIGLX: 3D driver claims to not support visual 0x55
(WW) AIGLX: 3D driver claims to not support visual 0x56
(WW) AIGLX: 3D driver claims to not support visual 0x57
(WW) AIGLX: 3D driver claims to not support visual 0x58
(WW) AIGLX: 3D driver claims to not support visual 0x59
(WW) AIGLX: 3D driver claims to not support visual 0x5a
(WW) AIGLX: 3D driver claims to not support visual 0x5b
(WW) AIGLX: 3D driver claims to not support visual 0x5c
(WW) AIGLX: 3D driver claims to not support visual 0x5d
(WW) AIGLX: 3D driver claims to not support visual 0x5e
(WW) AIGLX: 3D driver claims to not support visual 0x5f
(WW) AIGLX: 3D driver claims to not support visual 0x60
(WW) AIGLX: 3D driver claims to not support visual 0x61
(WW) AIGLX: 3D driver claims to not support visual 0x62
(WW) AIGLX: 3D driver claims to not support visual 0x63
(WW) AIGLX: 3D driver claims to not support visual 0x64
(WW) AIGLX: 3D driver claims to not support visual 0x65
(WW) AIGLX: 3D driver claims to not support visual 0x66
(WW) AIGLX: 3D driver claims to not support visual 0x67
(WW) AIGLX: 3D driver claims to not support visual 0x68
(WW) AIGLX: 3D driver claims to not support visual 0x69
(WW) AIGLX: 3D driver claims to not support visual 0x6a
(WW) AIGLX: 3D driver claims to not support visual 0x6b
(WW) AIGLX: 3D driver claims to not support visual 0x6c
(WW) AIGLX: 3D driver claims to not support visual 0x6d
(WW) AIGLX: 3D driver claims to not support visual 0x6e
(WW) AIGLX: 3D driver claims to not support visual 0x6f
(WW) AIGLX: 3D driver claims to not support visual 0x70
(WW) AIGLX: 3D driver claims to not support visual 0x71
(WW) AIGLX: 3D driver claims to not support visual 0x72
(II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(WW) Warning, couldn't open module synaptics
(II) UnloadModule: "synaptics"
(EE) Failed to load module "synaptics" (module does not exist, 0)
(EE) No input driver matching `synaptics'
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device Video Bus
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.0.7
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event8"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) Video Bus: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Video Bus: xkb_layout: "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) Video Bus: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Video Bus: xkb_layout: "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) Video Bus: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Video Bus: xkb_layout: "us"
(II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event10"
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Found mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) AT Translated Set 2 keyboard: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
AUDIT: Sun Dec 14 17:40:42 2008: 5761 Xorg: client 5 rejected from local host ( uid=1000 gid=1000 pid=5856 )
AUDIT: Sun Dec 14 17:40:42 2008: 5761 Xorg: client 5 rejected from local host ( uid=1000 gid=1000 pid=5857 )
AUDIT: Sun Dec 14 17:40:42 2008: 5761 Xorg: client 5 rejected from local host ( uid=1000 gid=1000 pid=5858 )I think the interesting thing is that it says:
Failed to load module "synaptics" (module does not exist, 0)
[pablo@pablerkas ~]$ sudo updatedb
[pablo@pablerkas ~]$ locate synaptic
/etc/hal/fdi/policy/11-x11-synaptics.fdi
/etc/hal/fdi/policy/10osvendor/11-x11-synaptics.fdi
/home/pablo/.icons/Black_White/scalable/apps/synaptic.png
/usr/share/cairo-dock/themes/_Brit_/icons/synaptic.svg
/usr/share/cairo-dock/themes/_MacOSX_/icons/synaptic.svg
/usr/share/cairo-dock/themes/_Neon_/icons/synaptic.png
/usr/share/cairo-dock/themes/_Neon_/launchers/01synaptic.desktop
/usr/share/cairo-dock/themes/_Wood_/icons/synaptic.svg
/usr/share/cairo-dock/themes/_Wood_/launchers/01synaptic.desktop
/usr/src/linux-2.6.27-ARCH/include/config/mouse/ps2/synaptics.h
/var/abs/community/lib/libsynaptics
/var/abs/community/lib/libsynaptics/PKGBUILD
/var/abs/community/system/gsynaptics
/var/abs/community/system/gsynaptics/PKGBUILD
/var/abs/community/system/gsynaptics/build-filename.dpatch
/var/abs/community/system/gsynaptics/do-not-set-zero.dpatch
/var/abs/community/system/gsynaptics/dot-fixes.dpatch
/var/abs/community/system/gsynaptics/gsynaptics.install
/var/abs/extra/synaptics
/var/abs/extra/synaptics/PKGBUILD
/var/abs/extra/synaptics/synaptics-0.14.5-makefile-fpic.patch
/var/abs/extra/synaptics/synaptics-0.14.6.99-git-master.patch
/var/abs/extra/synaptics/synaptics.install
/var/abs/extra/synaptics/xinerama-fix.patch
/var/lib/pacman/sync/community/gsynaptics-0.9.14-2
/var/lib/pacman/sync/community/libsynaptics-0.14.6c-2
/var/lib/pacman/sync/community/gsynaptics-0.9.14-2/depends
/var/lib/pacman/sync/community/gsynaptics-0.9.14-2/desc
/var/lib/pacman/sync/community/libsynaptics-0.14.6c-2/depends
/var/lib/pacman/sync/community/libsynaptics-0.14.6c-2/desc
/var/lib/pacman/sync/extra/xf86-input-synaptics-0.99.1-1
/var/lib/pacman/sync/extra/xf86-input-synaptics-0.99.1-1/depends
/var/lib/pacman/sync/extra/xf86-input-synaptics-0.99.1-1/descLast edited by Slurp (2008-12-14 18:13:17)
Stop the world, I get off...
Offline
#7 2008-12-14 18:40:20
- pointone
- Wiki Admin
- From: Waterloo, ON
- Registered: 2008-02-21
- Posts: 379
Re: [SOLVED] More Xorg Vs. Synaptics
Do you have the package xf86-input-synaptics installed?
'synaptics' was replaced by 'xf86-input-synaptics'.
Otherwise, I'm stumped!
M*cr*s*ft: Who needs quality when you have marketing?
Offline
#8 2008-12-14 19:52:58
- Slurp
- Member
- From: Madrid, Spain
- Registered: 2008-09-02
- Posts: 124
Re: [SOLVED] More Xorg Vs. Synaptics
uuuppsss... You were right, it was downloaded but not installed, I don't know why. Now everything is working fine. Thank you very much.
Stop the world, I get off...
Offline