You are not logged in.
Pages: 1
System x86_64 Intel Ga-945GCM/S2C Pentium 4 2.8GHZ.
System has four sata ports, two master/slave pairs.
Added a pci-e card (JMicron JMB360) having a single esata port. Connected the esata port to an adapter(sataII to Compact Flash).
Dmesg reports the CF 8GB card is present.
I do not find this sata drive listed in gparted. Two other CF cards attached to sata adapters are recognized as sd devices.
Dmesg.....
bash-3.2# dmesg | grep CF
ACPI: RSDT CF7F3040, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
ACPI: FACP CF7F30C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
ACPI: DSDT CF7F3180, 3844 (r1 GBT GBTUACPI 1000 MSFT 100000C)
ACPI: FACS CF7F0000, 0040
ACPI: HPET CF7F6B00, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98)
ACPI: MCFG CF7F6B80, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
ACPI: APIC CF7F6A40, 0068 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
ACPI: SSDT CF7F6C00, 015C (r1 PmRef Cpu0Ist 3000 INTL 20040311)
ACPI: SSDT CF7F7090, 0167 (r1 PmRef CpuPm 3000 INTL 20040311)
ACPI: SSDT CF7F7000, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311)
ata5.00: ATA-4: CF 8GB, 20070831, max UDMA/66
scsi 4:0:0:0: Direct-Access ATA CF 8GB 2007 PQ: 0 ANSI: 5
bash-3.2#Not aware of any bios requirements for this mobo to utilize pci-e.
Desire to use this pci-e connected device in a raid array.
Last edited by lilsirecho (2009-02-12 16:00:44)
Prediction...This year will be a very odd year!
Hard work does not kill people but why risk it: Charlie Mccarthy
A man is not complete until he is married..then..he is finished.
When ALL is lost, what can be found? Even bytes get lonely for a little bit! X-ray confirms Iam spineless!
Offline
01:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller
Flags: bus master, fast devsel, latency 0, IRQ 16
I/O ports at 6000 [size=8]
I/O ports at 6400 [size=4]
I/O ports at 6800 [size=8]
I/O ports at 6c00 [size=4]
I/O ports at 7000 [size=16]
Memory at e4000000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [68] Power Management version 2
Capabilities: [50] Express Legacy Endpoint, MSI 01
Kernel driver in use: ahci
Kernel modules: ahciThe lspci -v gives the above info.
Prediction...This year will be a very odd year!
Hard work does not kill people but why risk it: Charlie Mccarthy
A man is not complete until he is married..then..he is finished.
When ALL is lost, what can be found? Even bytes get lonely for a little bit! X-ray confirms Iam spineless!
Offline
Suddenly, after removing two of the three sata CF cards and running with only the new pci-e connected card and adapter, and booting to find only one Identified...the pci-e connected card.
Then rebooted and inserted the remaining two cards...this resulted in ID's for all three CF cards and access to the included raid array.
Hdparm reports read speed of 137MB/sec on the array.
Have no idea why it didn't connect initially.
I won't close this post until I have repeatable performance.
Prediction...This year will be a very odd year!
Hard work does not kill people but why risk it: Charlie Mccarthy
A man is not complete until he is married..then..he is finished.
When ALL is lost, what can be found? Even bytes get lonely for a little bit! X-ray confirms Iam spineless!
Offline
Seems that the problem is corrected........
I assume the sata connectors(internal) were not making contact on one of the adapters. They are rather flimsy...............
Prediction...This year will be a very odd year!
Hard work does not kill people but why risk it: Charlie Mccarthy
A man is not complete until he is married..then..he is finished.
When ALL is lost, what can be found? Even bytes get lonely for a little bit! X-ray confirms Iam spineless!
Offline
Pages: 1