You are not logged in.
In all apps except mpd I have to lower volume (with slider in said app) to 5% else it's very loud, in MPD I can put it at 100% and the volume is very low.
[zaggynl@6750 ~]$ sudo lsmod
Module Size Used by
ipv6 260084 14
fuse 53020 6
ext2 66184 1
ctxfi 65044 2
snd_pcm 70020 3 ctxfi
snd_timer 21384 1 snd_pcm
ppp_generic 25116 0
snd 50852 5 ctxfi,snd_pcm,snd_timer
ppdev 9348 0
nvidia 7221112 26
soundcore 8160 1 snd
snd_page_alloc 10120 1 snd_pcm
iTCO_wdt 12836 0
sg 26804 0
lp 11108 0
i2c_i801 10896 0
parport_pc 37700 1
parport 33004 3 ppdev,lp,parport_pc
iTCO_vendor_support 4996 1 iTCO_wdt
usb_storage 95552 1
intel_agp 27836 0
serio_raw 7172 0
i2c_core 22804 2 nvidia,i2c_i801
psmouse 55828 0
usbhid 36640 0
hid 40704 1 usbhid
agpgart 31572 2 nvidia,intel_agp
evdev 11296 8
thermal 17180 0
processor 41388 1 thermal
fan 6276 0
button 7824 0
battery 12036 0
ac 6020 0
dm_mod 54216 0
loop 16012 0
slhc 7552 1 ppp_generic
r8169 33924 0
mii 6528 1 r8169
rtc_cmos 12332 0
rtc_core 17564 1 rtc_cmos
rtc_lib 4480 1 rtc_core
ext3 127112 2
jbd 46996 1 ext3
mbcache 8708 2 ext2,ext3
sr_mod 16708 0
cdrom 35360 1 sr_mod
sd_mod 26904 10
uhci_hcd 24592 0
ehci_hcd 36876 0
usbcore 136848 5 usb_storage,usbhid,uhci_hcd,ehci_hcd
ahci 30988 7
libata 158112 1 ahci
scsi_mod 102164 5 sg,usb_storage,sr_mod,sd_mod,libata
Alsamixer Master, PCM and Wav sliders at 65%
[zaggynl@6750 ~]$ mpd --version
mpd (MPD: Music Player Daemon) 0.14.1
/etc/mpd.conf:
music_directory "~/music"
playlist_directory "~/Playlists"
db_file "~/.mpd/db"
log_file "~/.mpd/log"
error_file "~/.mpd/error"
pid_file "~/.mpd/mpd.pid"
state_file "~/.mpd/mpdstate"
user "zaggynl"
bind_to_address "127.0.0.1"
port "6600"
mixer_type "alsa"
mixer_device "default"
mixer_control "MPD"
#connection_timeout "60"
#max_playlist_length "16384"
#filesystem_charset "ISO-8859-1"
#id3v1_encoding "ISO-8859-1"
replaygain "album"
volume_normalization "no"
replaygain_preamp "5
/etc/rc.conf:
#
# /etc/rc.conf - Main Configuration for Arch Linux
#
# -----------------------------------------------------------------------
# LOCALIZATION
# -----------------------------------------------------------------------
#
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
#
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Europe/Amsterdam"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# -----------------------------------------------------------------------
# HARDWARE
# -----------------------------------------------------------------------
#
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
#
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
#
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(r8169 slhc !pcspkr !snd_pcsp loop dm-mod !oss !snd_seq_oss !snd_pcm_oss !snd_mixer_oss)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# -----------------------------------------------------------------------
# NETWORKING
# -----------------------------------------------------------------------
#
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
#
HOSTNAME="6750"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
#
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
#
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#
eth0="eth0 192.168.2.124 netmask 255.255.255.0 broadcast 192.168.2.255"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
#
gateway="default gw 192.168.2.1"
ROUTES=(gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
#
# Network profiles are found in /etc/network.d
#
# This now requires the netcfg package
#
#NETWORKS=(main)
# -----------------------------------------------------------------------
# DAEMONS
# -----------------------------------------------------------------------
#
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
#
DAEMONS=(syslog-ng hal network alsa @sshd @netfs @crond @ntpd @hellanzb @mpd)
Last edited by zaggynl (2009-02-21 13:45:50)
Offline
Try changing mixer_control to PCM.
Offline
That allows me to increase the volume but also increases volume for youtube vids. VLC stays the same.
Offline
Fixed by adding the following:
audio_output {
type "alsa"
name "My ALSA Device"
device "hw:0,0" # optional
format "44100:16:2" # optional
}
complete conf:
music_directory "~/music"
playlist_directory "~/Playlists"
db_file "~/.mpd/db"
log_file "~/.mpd/log"
error_file "~/.mpd/error"
pid_file "~/.mpd/mpd.pid"
state_file "~/.mpd/mpdstate"
user "zaggynl"
bind_to_address "127.0.0.1"
port "6600"
mixer_type "alsa"
mixer_device "mpdvol"
mixer_control "MPD"
#connection_timeout "60"
max_playlist_length "40000"
#filesystem_charset "ISO-8859-1"
#id3v1_encoding "ISO-8859-1"
#replaygain "album"
volume_normalization "no"
#replaygain_preamp "5"
audio_output {
type "alsa"
name "My ALSA Device"
device "hw:0,0" # optional
format "44100:16:2" # optional
}
Offline