You are not logged in.

Pages: 1

#1 2008-12-17 22:42:01

lazork
Member
Registered: 2008-11-12
Posts: 30

Openoffice randomly crashing X

I don't know whether this is related to Xorg, ATI drivers, openoffice or something else, but every few times I try to open a document with openoffice it crashes X and I get kicked back at the GDM login screen.

This is my xorg.conf:

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
#    InputDevice    "Mouse0" "CorePointer"
#    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

#Section "Files"
#    ModulePath   "/usr/lib/xorg/modules"
#    FontPath     "/usr/share/fonts/misc"
#    FontPath     "/usr/share/fonts/100dpi:unscaled"
#    FontPath     "/usr/share/fonts/75dpi:unscaled"
#    FontPath     "/usr/share/fonts/TTF"
#    FontPath     "/usr/share/fonts/Type1"
#EndSection

#Section "Module"
#    Load  "xtrap"
#    Load  "glx"
#    Load  "dbe"
#    Load  "extmod"
#    Load  "dri"
#    Load  "drm"
#    Load  "freetype"
#EndSection

#Section "InputDevice"
#    Identifier  "Keyboard0"
#    Driver      "kbd"
#EndSection

#Section "InputDevice"
#    Identifier  "Mouse0"
#    Driver      "mouse"
#    Option        "Protocol" "auto"
#    Option        "Device" "/dev/input/mice"
#    Option        "ZAxisMapping" "4 5 6 7"
#EndSection

Section "Monitor"
    #DisplaySize      290   210    # mm
    Identifier   "Monitor0"
    VendorName   "QDS"
    ModelName    "5"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "SWcursor"               # [<bool>]
        #Option     "Dac6Bit"                # [<bool>]
        #Option     "Dac8Bit"                # [<bool>]
        #Option     "BusType"                # [<str>]
        #Option     "CPPIOMode"              # [<bool>]
        #Option     "CPusecTimeout"          # <i>
        #Option     "AGPMode"                "1"
        #Option     "AGPFastWrite"           # [<bool>]
        #Option     "AGPSize"                # <i>
        #Option     "GARTSize"               # <i>
        #Option     "RingSize"               # <i>
        #Option     "BufferSize"             # <i>
        #Option     "EnableDepthMoves"       # [<bool>]
        #Option     "EnablePageFlip"         # [<bool>]
        #Option     "NoBackBuffer"           # [<bool>]
        #Option     "DMAForXv"               # [<bool>]
        #Option     "FBTexPercent"           # <i>
        #Option     "DepthBits"              # <i>
        #Option     "PCIAPERSize"            # <i>
        #Option     "AccelDFS"               # [<bool>]
        #Option     "DDCMode"                # [<bool>]
        #Option     "IgnoreEDID"             # [<bool>]
        #Option     "DisplayPriority"        # [<str>]
        #Option     "PanelSize"              # [<str>]
        #Option     "ForceMinDotClock"       # <freq>
        #Option     "ColorTiling"            # [<bool>]
        #Option     "VideoKey"               # <i>
        #Option     "RageTheatreCrystal"     # <i>
        #Option     "RageTheatreTunerPort"     # <i>
        #Option     "RageTheatreCompositePort"     # <i>
        #Option     "RageTheatreSVideoPort"     # <i>
        #Option     "TunerType"              # <i>
        #Option     "RageTheatreMicrocPath"     # <str>
        #Option     "RageTheatreMicrocType"     # <str>
        #Option     "ScalerWidth"            # <i>
        #Option     "RenderAccel"            # [<bool>]
        #Option     "SubPixelOrder"          # [<str>]
        #Option     "ShowCache"              # [<bool>]
        #Option     "DynamicClocks"          # [<bool>]
        #Option     "VGAAccess"              # [<bool>]
        #Option     "ReverseDDC"             # [<bool>]
        #Option     "LVDSProbePLL"           # [<bool>]
        #Option     "AccelMethod"            # <str>
        #Option     "DRI"                    # [<bool>]
        #Option     "ConnectorTable"         # <str>
        #Option     "DefaultConnectorTable"     # [<bool>]
        #Option     "DefaultTMDSPLL"         # [<bool>]
        #Option     "TVDACLoadDetect"        # [<bool>]
        #Option     "ForceTVOut"             # [<bool>]
        #Option     "TVStandard"             # <str>
        #Option     "IgnoreLidStatus"        # [<bool>]
        #Option     "DefaultTVDACAdj"        # [<bool>]
        #Option     "Int10"                  # [<bool>]
    Identifier  "Card0"
    Driver      "radeon"
    VendorName  "ATI Technologies Inc"
    BoardName   "Radeon RV250 [Mobility FireGL 9000]"
    BusID       "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "DRI"
    Mode 0666
EndSection

this is Xorg.0.log

X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686 
Current Operating System: Linux ares 2.6.27-ARCH #1 SMP PREEMPT Mon Dec 8 22:01:01 UTC 2008 i686
Build Date: 05 December 2008  09:10:55PM
 
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 17 22:11:47 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified.  Using compiled-in default.
(==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d5900
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 4.1
    X.Org XInput driver : 2.1
    X.Org Server Extension : 1.1
    X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@1:0:0) ATI Technologies Inc Radeon RV250 [Mobility FireGL 9000] rev 1, Mem @ 0xe8000000/0, 0xfcff0000/0, I/O @ 0x0000c000/0, BIOS @ 0x????????/131072
(II) System resource ranges:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"

(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"

(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"

(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "freetype"

(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.5.3, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "dri"

(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "radeon"

(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
    compiled for 1.5.2, module version = 6.9.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 4.1
(II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
    ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610, ATI RV670,
    ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Radeon HD 3470,
    ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Mobility Radeon HD 3430,
    ATI Mobility Radeon HD 3400 Series, ATI FireMV 2450, ATI FireMV 2260,
    ATI FireMV 2260, ATI ATI Radeon HD 3600 Series,
    ATI ATI Radeon HD 3650 AGP, ATI ATI Radeon HD 3600 PRO,
    ATI ATI Radeon HD 3600 XT, ATI ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0x00000000fcff0000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(==) RADEON(0): Depth 24, (==) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"

(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 0.1.0
    ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon Mobility 9000 (M9) Lf (AGP)" (ChipID = 0x4c66)
(--) RADEON(0): Linear framebuffer at 0x00000000e8000000
(II) RADEON(0): AGP card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Detected total video RAM=32768K, accessible=65536K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 32768 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2048x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 35000, min_in_pll: 40, max_in_pll: 3000, xclk: 20000, sclk: 200.000000, mclk: 220.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=35000; xclk=20000
(II) RADEON(0): Bios Connector table: 
(II) RADEON(0): Port0: DDCType-0x60, DACType-1, TMDSType-1, ConnectorType-1
(II) RADEON(0): Port1: DDCType-0x64, DACType-2, TMDSType-1, ConnectorType-3
(II) RADEON(0): Port4: DDCType-0x0, DACType-0, TMDSType-0, ConnectorType-7
(II) RADEON(0): Port5: DDCType-0x0, DACType-2, TMDSType-0, ConnectorType-5
(II) RADEON(0): Output VGA-0 using monitor section Monitor0
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): DFP table revision: 3
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): Panel ID string: C1787
(II) RADEON(0): Panel Size from BIOS: 1024x768
(II) RADEON(0): BIOS provided dividers will be used.
(WW) RADEON(0): LVDS Info:
XRes: 1024, YRes: 768, DotClock: 65000
HBlank: 320, HOverPlus: 24, HSyncWidth: 136
VBlank: 38, VOverPlus: 3, VSyncWidth: 6
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC PAL NTSC-J 
(II) RADEON(0): Port0:
 Monitor   -- AUTO
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- None
 DDC Type  -- 0x60
(II) RADEON(0): Port1:
 Monitor   -- AUTO
 Connector -- DVI-D
 DAC Type  -- None
 TMDS Type -- Internal
 DDC Type  -- 0x64
(II) RADEON(0): Port2:
 Monitor   -- AUTO
 Connector -- LVDS
 DAC Type  -- None
 TMDS Type -- None
 DDC Type  -- 0x0
(II) RADEON(0): Port3:
 Monitor   -- AUTO
 Connector -- STV
 DAC Type  -- TVDAC/ExtDAC
 TMDS Type -- None
 DDC Type  -- 0x0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
finished output detect: 1
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
finished output detect: 2
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
finished output detect: 3
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1024x768
(II) RADEON(0): Total number of valid Screen mode(s) added: 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1024x768
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"

(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.2.0
    ABI class: X.Org Video Driver, version 4.1
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
    of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit e8000000 0 0
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
(II) RADEON(0): Dynamic Clock Scaling Disabled
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() : 
(II) RADEON(0):   mem_size         : 0x04000000
(II) RADEON(0):   MC_FB_LOCATION   : 0xebffe800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1024,8191)
(II) RADEON(0): Reserved area from (0,1024) to (1024,1026)
(II) RADEON(0): Largest offscreen area available: 1024 x 7165
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x800000
(II) RADEON(0): Will use depth buffer at offset 0xc00000
(II) RADEON(0): Will use 16384 kb for textures at offset 0x1000000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xe8000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(==) RADEON(0): Using AGP 4x
(II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x8086/0x3340; Card 0x1002/0x4c66]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xe0000000
(II) RADEON(0): [agp] Ring mapped at 0xb57f0000
(II) RADEON(0): [agp] ring read ptr handle = 0xe0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb7fd9000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xe0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xb55f0000
(II) RADEON(0): [agp] GART texture map handle = 0xe0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xb5110000
(II) RADEON(0): [drm] register handle = 0xfcff0000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0xebffe800 0x1fff0000
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 11
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0xebffe800 is: 0xebffe800
(WW) RADEON(0):   MC_AGP_LOCATION was: 0xffffffc0 is: 0xe07fe000
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0xebffe800 0xebffe800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xe07fe000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Lines
    Scanline Image Writes
    Setting up tile and stipple cache:
        32 128x128 slots
        32 256x256 slots
        16 512x512 slots
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00402000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00406000
(II) RADEON(0): Largest offscreen area available: 1024 x 7157
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"

(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
    compiled for 1.5.2, module version = 1.0.0
    ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Textured video disabled on RV250 due to HW bug
init memmap
init common
init crtc1
init pll1
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0xebffe800 0xebffe800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xe07fe000
restore common
restore crtc1
restore pll1
restore LVDS
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r200_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 270 x 203
(II) config/hal: Adding input device Video Bus
(II) LoadModule: "evdev"

(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.5.2, module version = 2.0.7
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.1
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event8"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) Video Bus: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Video Bus: xkb_layout: "us"
(II) config/hal: Adding input device AlpsPS/2 ALPS DualPoint TouchPad
(**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
(**) AlpsPS/2 ALPS DualPoint TouchPad: Device: "/dev/input/event7"
(II) AlpsPS/2 ALPS DualPoint TouchPad: Found x and y relative axes
(II) AlpsPS/2 ALPS DualPoint TouchPad: Found x and y absolute axes
(II) AlpsPS/2 ALPS DualPoint TouchPad: Found absolute touchpad
(II) AlpsPS/2 ALPS DualPoint TouchPad: Found mouse buttons
(II) AlpsPS/2 ALPS DualPoint TouchPad: Configuring as mouse
(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: MOUSE)
(II) config/hal: Adding input device DualPoint Stick
(**) DualPoint Stick: always reports core events
(**) DualPoint Stick: Device: "/dev/input/event6"
(II) DualPoint Stick: Found x and y relative axes
(II) DualPoint Stick: Found mouse buttons
(II) DualPoint Stick: Configuring as mouse
(II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE)
(II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event5"
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Found mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) AT Translated Set 2 keyboard: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1024x768
(II) RADEON(0): Total number of valid Screen mode(s) added: 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1024x768
(II) RADEON(0): Total number of valid Screen mode(s) added: 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1024x768
(II) RADEON(0): Total number of valid Screen mode(s) added: 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1024x768
(II) RADEON(0): Total number of valid Screen mode(s) added: 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1024x768
(II) RADEON(0): Total number of valid Screen mode(s) added: 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
BOGUS LENGTH in write keyboard desc, expected 6912, got 6928

and finally the last 100 lines of the file created by strace -f -o oo-strace2.txt soffice document.doc:

6904  time(NULL)                        = 1229550067
6904  time(NULL)                        = 1229550067
6904  time(NULL)                        = 1229550067
6904  time(NULL)                        = 1229550067
6904  time(NULL)                        = 1229550067
6904  time(NULL)                        = 1229550067
6904  time(NULL)                        = 1229550067
6904  time(NULL)                        = 1229550067
6904  time(NULL)                        = 1229550067
6904  time(NULL)                        = 1229550067
6904  time(NULL)                        = 1229550067
6904  time(NULL)                        = 1229550067
6904  time(NULL)                        = 1229550067
6904  time(NULL)                        = 1229550067
6904  time(NULL)                        = 1229550067
6904  lseek(40, 2406, SEEK_SET)         = 2406
6904  lseek(40, 0, SEEK_CUR)            = 2406
6904  lseek(40, 2406, SEEK_SET)         = 2406
6904  lseek(40, 0, SEEK_CUR)            = 2406
6904  read(40, "\0\0S\3\0\0\1\20\0\0\5\222\0\0\0\20\0\0\0\1\0\0\1\21\0\0\0\30\0\0\0\30P"..., 1024) = 1024
6904  lseek(40, 2422, SEEK_SET)         = 2422
6904  lseek(40, 0, SEEK_CUR)            = 2422
6904  read(40, "\0\0\0\1\0\0\1\21\0\0\0\30\0\0\0\30Pagina\0\0\0\0\0\20\0\0\1\21\0"..., 1410) = 1410
6904  select(6, [5], [5], NULL, NULL)   = 2 (in [5], out [5])
6904  read(5, "\34j\357\2_\0\340\2\207\1\0\0xO\33\0\0\244\260\277\352\n\t\10\30\245\260\277_\0\340\2"..., 4096) = 32
6904  writev(5, [{"\2\0\4\0_\0\340\2\1\0\0\0\0\0\0\0\22\0\22\0_\0\340\2C\0\0\0\37\0\0\0\10"..., 184}], 1) = 184
6904  select(6, [5], [], NULL, NULL)    = 1 (in [5])
6904  read(5, "\34j\361\2_\0\340\2C\0\0\0\221Z\33\0\0\244\260\277\352\n\t\10\30\245\260\277_\0\340\2\1"..., 4096) = 4096
6904  read(5, "\0\0\0\0\1\1\1\0\254\377\0\0\0\0\0\0\1\1\1\0001\377\0\0\0\0\0\0\1\1\1\0004"..., 8464) = 2920
6904  read(5, 0x944be40, 5544)          = -1 EAGAIN (Resource temporarily unavailable)
6904  select(6, [5], NULL, NULL, NULL <unfinished ...>
6911  <... poll resumed> )              = 1 ([{fd=24, revents=POLLIN|POLLHUP}])
6911  poll([{fd=24, events=POLLIN}], 1, 0) = 1 ([{fd=24, revents=POLLIN|POLLHUP}])
6911  read(24, ""..., 8)                = 0
6911  write(2, "ICE default IO error handler doin"..., 68) = 68
6911  fcntl64(35, F_SETLK64, {type=F_UNLCK, whence=SEEK_SET, start=0, len=0}, 0xaed68054) = 0
6911  close(35)                         = 0
6911  fcntl64(36, F_SETLK64, {type=F_UNLCK, whence=SEEK_SET, start=0, len=0}, 0xaed68054) = 0
6911  close(36)                         = 0
6911  writev(23, [{"GIOP\1\2\1\5\0\0\0\0"..., 12}], 1) = -1 EPIPE (Broken pipe)
6911  --- SIGPIPE (Broken pipe) @ 0 (0) ---
6911  close(23 <unfinished ...>
6915  <... poll resumed> )              = 0 (Timeout)
6915  gettimeofday({1229550067, 668405}, NULL) = 0
6915  poll([{fd=39, events=POLLIN}], 1, 1000 <unfinished ...>
6911  <... close resumed> )             = 0
6911  writev(21, [{"GIOP\1\2\1\5\0\0\0\0"..., 12}], 1) = -1 EPIPE (Broken pipe)
6908  <... futex resumed> )             = ? ERESTART_RESTARTBLOCK (To be restarted)
6908  --- SIGHUP (Hangup) @ 0 (0) ---
6908  access("/tmp", R_OK|W_OK)         = 0
6908  socket(PF_FILE, SOCK_STREAM, 0)   = 23
6908  fcntl64(23, F_GETFD)              = 0
6908  fcntl64(23, F_SETFD, FD_CLOEXEC)  = 0
6908  access("/tmp/OSL_PIPE_1000_SingleOfficeIPC_9af776d574a989735d353d2ef247996", F_OK) = 0
6908  connect(23, {sa_family=AF_FILE, path="/tmp/OSL_PIPE_1000_SingleOfficeIPC_9af776d574a989735d353d2ef247996"...}, 110 <unfinished ...>
6910  <... accept resumed> 0, NULL)     = 16
6910  --- SIGCONT (Continued) @ 0 (0) ---
6910  fcntl64(16, F_GETFD)              = 0
6910  fcntl64(16, F_SETFD, FD_CLOEXEC)  = 0
6910  futex(0x92fce3c, FUTEX_WAIT_PRIVATE, 1, NULL <unfinished ...>
6908  <... connect resumed> )           = 0
6908  send(23, "InternalIPC::TerminateThread\0"..., 29, 0) = 29
6908  shutdown(23, 2 /* send and receive */) = 0
6908  close(23)                         = 0
6908  futex(0x92fce3c, FUTEX_CMP_REQUEUE_PRIVATE, 1, 2147483647, 0x92fce68, 2 <unfinished ...>
6910  <... futex resumed> )             = 0
6910  futex(0x92fce68, FUTEX_WAIT_PRIVATE, 2, NULL <unfinished ...>
6908  <... futex resumed> )             = 1
6908  futex(0x92fce68, FUTEX_WAKE_PRIVATE, 1 <unfinished ...>
6910  <... futex resumed> )             = 0
6910  futex(0x92fce68, FUTEX_WAKE_PRIVATE, 1) = 0
6910  _exit(0)                          = ?
6908  <... futex resumed> )             = 1
6908  shutdown(14, 2 /* send and receive */) = 0
6908  close(14)                         = 0
6908  unlink("/tmp/OSL_PIPE_1000_SingleOfficeIPC_9af776d574a989735d353d2ef247996") = 0
6908  shutdown(16, 2 /* send and receive */) = 0
6908  close(16)                         = 0
6908  sigreturn()                       = ? (mask now [])
6908  clock_gettime(CLOCK_REALTIME, {1229550067, 681919139}) = 0
6908  futex(0xb7f41724, FUTEX_WAIT_PRIVATE, 3, {6, 272055861} <unfinished ...>
6904  <... select resumed> )            = ? ERESTARTNOHAND (To be restarted)
6904  select(6, [5], NULL, NULL, NULL <unfinished ...>
6911  --- SIGPIPE (Broken pipe) @ 0 (0) ---
6915  <... poll resumed> )              = 1 ([{fd=39, revents=POLLIN|POLLHUP}])
6904  <... select resumed> )            = 1 (in [5])
6904  read(5, ""..., 5544)              = 0
6904  select(6, [5], [], NULL, NULL)    = 1 (in [5])
6904  read(5, ""..., 4096)              = 0
6904  write(2, "X IO Error\n"..., 11)   = -1 EIO (Input/output error)
6904  exit_group(0)                     = ?
6915  poll([{fd=39, events=POLLIN}], 1, 0 <unfinished ...>
6885  <... waitpid resumed> 0xbf910af8, 0) = ? ERESTARTSYS (To be restarted)
6915  <... poll resumed> )              = 1 ([{fd=39, revents=POLLIN|POLLHUP}])
6885  --- SIGHUP (Hangup) @ 0 (0) ---
6915  read(39,  <unfinished ...>
6885  +++ killed by SIGHUP +++
6915  <... read resumed> ""..., 4096)   = 0
6915  write(2, "X IO Error\n"..., 11)   = -1 EIO (Input/output error)
6915  exit_group(0)                     = ?

I really don't know where the problem could be, so any advice will be appreciated

Offline

#2 2008-12-18 19:25:19

lazork
Member
Registered: 2008-11-12
Posts: 30

Re: Openoffice randomly crashing X

Update on the issue:
after reinstalling the whole system from scratch the problem is still there.
I've installed arch on another computer recently (a desktop) and there are no problems there, so I'm thinking it might be something with the hardware of this one (a laptop).
Also notice that the crashes occur both with and without compiz and both with or without a xorg.conf file (the latest xorg should allow this, right?).
Any ideas on what to try next?

Offline

#3 2008-12-29 00:56:36

greenfuse
Member
Registered: 2008-02-14
Posts: 57

Re: Openoffice randomly crashing X

I also have this problem. After upgrading much of my system, including openoffice, the X server crashes every time I start openoffice. It crashes when started from the command line, the menu, or the file browser.

I did not update xorg, still using 1.4 and am using the i810 driver.

I have tried:
adding  "export OOO_FORCE_DESKTOP=gnome" to .bashrc
reinstalling openoffice

Offline

#4 2008-12-29 03:25:08

greenfuse
Member
Registered: 2008-02-14
Posts: 57

Re: Openoffice randomly crashing X

Update

Tried downgrading to openoffice 2.4 without success

Upgraded to xorg 1.5 and intel driver. Everything working now.

Offline

#5 2008-12-29 20:00:19

lazork
Member
Registered: 2008-11-12
Posts: 30

Re: Openoffice randomly crashing X

I think I might have solved the "crashing" issue by switching from the sun java runtime environment to the gcj one. Unfortunately Xorg is still randomly freezing (notice that these are freezes and not crashes anymore - no error in any log).

greenfuse wrote:

Update

Upgraded to xorg 1.5 and intel driver. Everything working now.

Which of these two do you think is responsible for solving the issue? I've got an updated xorg, but that's not helping. What's odd is that I've got another computer with arch installed (same exact installation, done 2 days later) and there are no problems there, so I'm thinking about some hardware/driver issue.

Offline

#6 2009-01-06 18:17:00

pappbox
Member
From: Norway
Registered: 2008-01-04
Posts: 42

Re: Openoffice randomly crashing X

Same problem over here...
Using abiword noadays

Offline

#7 2009-01-06 22:08:15

basov
Member
Registered: 2008-07-29
Posts: 30

Re: Openoffice randomly crashing X

I've had that very same problem
Sometimes openoffice would totaly lock X
tried reinstalling 2.4 but no luck

After a lot of searching and googling I found go-openoffice
Installed it through aur, and openoffice didn't crash anymore

However, I didn't find the problem, but since go-oo still works nicely
I don't really have the need to figure it out.

Offline

#8 2009-03-02 21:42:12

greenfuse
Member
Registered: 2008-02-14
Posts: 57

Re: Openoffice randomly crashing X

lazork wrote:

Which of these two do you think is responsible for solving the issue?

Sorry about the late reply, I have not checked this post until now.

It could be either or both. The new xorg runs without a conf file, so it makes its own settings which, if there was anything wrong in the conf file, would correct the problem.  The intel driver was required for the upgrade of xorg. It might be responding differently to the calls of openoffice, which could also correct the problem.

Offline

#9 2009-03-03 00:57:11

firecat53
Member
From: Lake Stevens, WA, USA
Registered: 2007-05-14
Posts: 1,542
Website

Re: Openoffice randomly crashing X

This could be a gtk problem with openoffice (not sure -- it didn't crash X for me, just openoffice). In openoffice, select tools -> options -> general -> and check the box labelled 'Use openoffice.org dialogs'. Now click ok and restart openoffice. Now try to open a file and see if it still crashes for you.

Good luck!
Scott

Github

Offline

Pages: 1

Board footer

Powered by FluxBB