You are not logged in.
Pages: 1
Hello, I can't seem to get my 2 DVD drives mounted.
Here is my dmesg(I think thats the right part). I have 2 drives; the NEC and Lite-on. I can't figure out how to mount them.
ata4.00: ATAPI: _NEC DVD_RW ND-3540A, 1.WB, max UDMA/33
ata4: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
ata4.00: configured for UDMA/33
scsi 3:0:0:0: CD-ROM _NEC DVD_RW ND-3540A 1.WB PQ: 0 ANSI: 5
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
sata_nv 0000:00:0f.0: PCI INT A -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:0f.0: Using SWNCQ mode
sata_nv 0000:00:0f.0: setting latency timer to 64
scsi5 : sata_nv
scsi6 : sata_nv
ata6: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 22
ata7: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 22
ata1: SATA link down (SStatus 0 SControl 0)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATAPI: LITE-ON DVDRW LH-20A1S, 9L09, max UDMA/100
ata6.00: configured for UDMA/100
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata7.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata7.00: configured for UDMA/133
scsi 5:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1S 9L09 PQ: 0 ANSI: 5
scsi 6:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
Driver 'sd' needs updating - please use bus_type methods
sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
sr 5:0:0:0: Attached scsi CD-ROM sr1
Fstab:
#
# /etc/fstab: static file system information
#
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
#/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
#/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
#/dev/fd0 /media/fl auto user,noauto 0 0
UUID=1548fb65-e0d0-489b-bac7-c4dc7a0719a0 / ext3 defaults 0 1
UUID=8d4c7698-d94c-403f-85b2-ad21a9f351a5 /home ext4 defaults 0 1
UUID=acd92ae6-b7a1-4d0b-9211-725e991dac59 /var reiserfs defaults 0 1
UUID=c3f1db01-3d79-45bb-9175-69749fc3e8aa swap swap defaults 0 0
/dev/cd/dvd-5:0:0:0 /mnt/cd iso9660 ro,user,noauto,unhide 0 0
/dev/cd/dvd-3:0:0:0 /mnt/dvd iso9660 ro,user,noauto,unhide 0 0
/dev/sda1 /mnt/windows_d ntfs ro,user,auto,noexec,umask=0 0 0
Problem is I can't find the correct drive in /dev/ that corresponds with what dmesg lists. So I don't know what to mount.
Offline
Looks like /dev/sr0 and /dev/sr1 are the 2 you are looking for...
Have you tried mount /dev/sr0 /media/dvd ?
Offline
Try dev/sr0 for the Nec , and /dev/sr1 for the lite-on .
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
(A works at time B) && (time C > time B ) ≠ (A works at time C)
Offline
Thanks for the quick responses. I've tried...
/dev/sr0 /media/dvd iso9660 ro,user,noauto,unhide 0 0
/dev/sr1 /media/dvd1 iso9660 ro,user,noauto,unhide 0 0
and its still not working. Does it look right? Both /media/dvd and /media/dvd1 directory exist.
Last edited by pharcyde (2009-03-13 23:50:07)
Offline
Okay, I got it. /dev/sr0 and sr1 are correct but werent working. I setup HAL and pcmanfm and all is well. Thanks.
Offline
Pages: 1