You are not logged in.
Pages: 1
As per the title, I can't get the touchpad tap or double-tap to work on my new AA1 AOD150. The touchpad buttons work OK however. Has anyone else experienced this on these or similar devices?
I'm using the stock kernel with the following xorg.conf:
Section "ServerLayout"
Identifier "AA1Xorg"
Screen 0 "AA1Screen" 0 0
InputDevice "AA1Keyboard" "CoreKeyboard"
InputDevice "LogitechMX518" "CorePointer"
InputDevice "SynapticsTouchpad" "AlwaysCore"
Option "BlankTime" "0"
Option "StandbyTime" "0"
Option "SuspendTime" "0" # disable all other forms of power save
Option "OffTime" "10" # turn off DPMS-capable monitor after x mins
EndSection
Section "ServerFlags"
Option "AIGLX" "false"
Option "AutoAddDevices" "false" # false to disabl hal hotplugging
Option "AllowMouseOpenFail" "true" # load Xorg even if mouse input not found
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/artwiz-fonts"
FontPath "/usr/share/fonts/local"
EndSection
Section "Module"
Load "ddc"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap"
Load "freetype"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "AA1Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "LogitechMX518"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2" # options: ExplorerPS/2, IMPS/2, auto, USB (Exp. req'd for side-buttons)
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
Option "ButtonMapping" "1 2 3 8 9"
Option "Emulate3Buttons" "no"
EndSection
Section "InputDevice"
Identifier "SynapticsTouchpad"
Driver "synaptics"
#Option "Device" "/dev/input/mice"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "ZAxisMapping" "4 5 6 7"
Option "SHMConfig" "true" # configurable at runtime? security risk if on
Option "LeftEdge" "1700" # x coord left
Option "RightEdge" "5300" # x coord right
Option "TopEdge" "1700" # y coord top
Option "BottomEdge" "4200" # y coord bottom
Option "FingerLow" "25" # pressure below this level triggers release
Option "FingerHigh" "30" # pressure above this level triggers touch
Option "MaxTapTime" "180" # max time in ms for detecting tap
Option "MaxTapMove" "220"
Option "VertEdgeScroll" "true" # enable vertical scroll zone
Option "HorizEdgeScroll" "true" # enable horizontal scroll zone
Option "CornerCoasting" "true" # enable continuous scroll with finger in corner
Option "CoastingSpeed" "0.30" # corner coasting speed
Option "VertScrollDelta" "100" # edge-to-edge scroll distance of the vertical scroll
Option "HorizScrollDelta" "100" # edge-to-edge scroll distance of the horizontal scroll
Option "MinSpeed" "0.09" # speed factor for low pointer movement
Option "MaxSpeed" "0.18" # maximum speed factor for fast pointer movement
Option "AccelFactor" "0.0015" # acceleration factor for normal pointer movements
#Option "VertTwoFingerScroll" "true" # vertical scroll anywhere with two fingers
#Option "HorizTwoFingerScroll" "true" # horizontal scroll anywhere with two fingers
EndSection
Section "Monitor"
Identifier "AA1Monitor"
VendorName "Acer"
Option "DPMS" "true"
HorizSync 28.0 - 96.0
VertRefresh 50.0 - 75.0
Modeline "1024x600" 50.40 1024 1048 1184 1344 600 600 619 625
#DisplaySize 346 203 # 075 dpi @ 1024x600
DisplaySize 261 152 # 100 dpi @ 1024x600
EndSection
Section "Device"
Identifier "Intel945"
Driver "intel"
BusID "PCI:0:2:0"
Option "Clone" "true"
Option "MonitorLayout" "LVDS,VGA"
Option "AccelMethod" "exa" # enables newer EXA based 2D acceleration
Option "MigrationHeuristic" "greedy" # alternate pixmap migration for EXA
EndSection
Section "Device"
Identifier "Fallback"
Driver "vesa"
VendorName "All"
BoardName "All"
EndSection
Section "Screen"
Identifier "AA1Screen"
Device "Intel945"
Monitor "AA1Monitor"
DefaultColorDepth 24
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x600" "800x600" "640x480"
Virtual 1024 600
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Last edited by thayer (2009-03-18 05:04:06)
thayer williams ~ cinderwick.ca
Offline
I'm running stable Xorg with had configuration. No problems here. What's in your Xorg.0.log? Wanna change to hal config? Then I can post my policy file.
Offline
with xserver 1.5 you have to enable tapping in synaptic section seperatly in xorg with:
Option "TapButton1" "1"
Option "TapButton2" "2"
Offline
with xserver 1.5 you have to enable tapping in synaptic section seperatly in xorg with:
Option "TapButton1" "1"
Option "TapButton2" "2"
Ah ha! Thanks, I'll give that a shot when I get back to my office. Thanks too Andy, if all else fails I may have to go with hal/xorg, but I'm leaving that as a last resort.
Update: That worked great, thanks again ichbinesderelch!
Last edited by thayer (2009-03-19 01:18:16)
thayer williams ~ cinderwick.ca
Offline
great, youre welcome
Offline
Pages: 1