You are not logged in.
- Topics: Active | Unanswered
#1 2009-03-14 22:49:20
- daybat
- Member
- Registered: 2009-03-14
- Posts: 5
GeForce2 Go & nvidia 96.43.11 & 2.6.28-ARCH
I surfed this forum and could not find any solutions of my problem. Maybe the direct request can help me
I'm using my old TC1000 TabletPC. it has the GeForce2 Go nvidia chip. And I have ArchLinux on it.
Before I installed Xubuntu with older kernel and with NVIDIA driver 1.0-7185. Everything worked fine for me. But now with 2.6.28 kernel I can not setup nvidia 1.0-7185 driver. Nvidia installer does not like the Linux src
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sat Mar 14 23:39:11 2009
option status:
license pre-accepted : false
update : false
force update : false
expert : false
uninstall : false
driver info : false
precompiled interfaces : true
no ncurses color : false
query latest version : false
OpenGL header files : true
no questions : false
silent : false
no recursion : false
no backup : false
kernel module only : false
sanity : false
add this kernel : false
no runlevel check : false
no network : false
no ABI note : false
no RPMs : false
no kernel module : false
force SELinux : default
no X server check : false
force tls : (not specified)
X install prefix : (not specified)
X library install path : (not specified)
X module install path : (not specified)
OpenGL install prefix : (not specified)
OpenGL install libdir : (not specified)
utility install prefix : (not specified)
utility install libdir : (not specified)
doc install prefix : (not specified)
kernel name : (not specified)
kernel include path : (not specified)
kernel source path : /usr/src/linux-2.6.28-ARCH/
kernel output path : /usr/src/linux-2.6.28-ARCH/
kernel install path : (not specified)
proc mount point : /proc
ui : (not specified)
tmpdir : /tmp
ftp mirror : ftp://download.nvidia.com
RPM file list : (not specified)
Using: nvidia-installer ncurses user interface
-> License accepted.
-> No precompiled kernel interface was found to match your kernel; would you li
ke the installer to attempt to download a kernel interface for your kernel f
rom the NVIDIA ftp site (ftp://download.nvidia.com)? (Answer: Yes)
-> No matching precompiled kernel interface was found on the NVIDIA ftp site;
this means that the installer will need to compile a kernel interface for
your kernel.
-> Performing CC sanity check with CC="cc".
-> Performing CC version check with CC="cc".
-> Using the kernel source path '/usr/src/linux-2.6.28-ARCH/' as specified by
the '--kernel-source-path' commandline option.
-> Using the kernel output path '/usr/src/linux-2.6.28-ARCH/' as specified by
the '--kernel-output-path' commandline option.
-> Kernel source path: '/usr/src/linux-2.6.28-ARCH/'
-> Kernel output path: '/usr/src/linux-2.6.28-ARCH/'
ERROR: If you are using a Linux 2.4 kernel, please make sure
you either have configured kernel sources matching your
kernel or the correct set of kernel headers installed
on your system.
If you are using a Linux 2.6 kernel, please make sure
you have configured kernel sources matching your kernel
installed on your system. If you specified a separate
output directory using either the "KBUILD_OUTPUT" or
the "O" KBUILD parameter, make sure to specify this
directory with the SYSOUT environment variable or with
the equivalent nvidia-installer command line option.
Depending on where and how the kernel sources (or the
kernel headers) were installed, you may need to specify
their location with the SYSSRC environment variable or
the equivalent nvidia-installer command line option.
ERROR: Installation has failed. Please see the file
'/var/log/nvidia-installer.log' for details. You may find suggestions
on fixing installation problems in the README available on the Linux
driver download page at www.nvidia.com.So I tried the nvidia 96.43.11. It was installed without any problems. But now when I start X I get only the black screen. No response on mouse & keyboard.
Maybe somebody know how to make love between GeForce2 Go & nvidia 96.43.11 & 2.6.28-ARCH
Offline
#2 2009-03-14 22:50:57
- daybat
- Member
- Registered: 2009-03-14
- Posts: 5
Re: GeForce2 Go & nvidia 96.43.11 & 2.6.28-ARCH
my NVIDIA bug report log file:
____________________________________________
Start of NVIDIA bug report log file. Please send this report,
along with a description of your bug, to linux-bugs@nvidia.com.
nvidia-bug-report.sh Version: 1833187
Date: Sat Mar 14 23:11:51 MSK 2009
uname: Linux tc1000 2.6.28-ARCH #1 SMP PREEMPT Sun Mar 8 10:18:28 UTC 2009 i586 Transmeta(tm) Crusoe(tm) Processor TM5800 GenuineTMx86 GNU/Linux
____________________________________________
/proc/driver/nvidia/version
NVRM version: NVIDIA Linux x86 Kernel Module 96.43.11 Mon Feb 23 15:29:05 PST 2009
GCC version: gcc-Version 4.3.3 (GCC)
____________________________________________
/proc/driver/nvidia/cards/0
Model: GeForce2 Go
IRQ: 11
Video BIOS: ??.??.??.??.??
Card Type: PCI
DMA Size: 32 bits
DMA Mask: 0xffffffff
____________________________________________
/proc/driver/nvidia/warnings/README
The NVIDIA graphics driver tries to detect potential problems
with the host system and warns about them using the system's
logging mechanisms. Important warning message are also logged
to dedicated text files in this directory.
____________________________________________
/proc/driver/nvidia/registry
VideoMemoryTypeOverride: 1
EnableVia4x: 0
EnableALiAGP: 0
NvAGP: 3
ReqAGPRate: 15
EnableAGPSBA: 0
EnableAGPFW: 0
SoftEDIDs: 1
Mobile: 4294967295
ResmanDebugLevel: 4294967295
FlatPanelMode: 0
DevicesConnected: 0
RmLogonRC: 1
VbiosFromROM: 0
ModifyDeviceFiles: 1
DeviceFileUID: 0
DeviceFileGID: 0
DeviceFileMode: 438
RemapLimit: 0
UpdateMemoryTypes: 4294967295
DetectPrimaryVga: 1
EnableBrightnessControl: 0
PanelPWMFrequency: 1018
PanelBrightnessLimits: 65280
RMEdgeIntrCheck: 1
UsePageAttributeTable: 4294967295
MapRegistersEarly: 0
RegistryDwords: ""
____________________________________________
/proc/cmdline
root=/dev/disk/by-uuid/42a35f39-b420-49e4-aaa4-72b3ac8a0235 ro vga=792
____________________________________________
/proc/cpuinfo
processor : 0
vendor_id : GenuineTMx86
cpu family : 5
model : 4
model name : Transmeta(tm) Crusoe(tm) Processor TM5800
stepping : 3
cpu MHz : 995.421
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr cx8 sep cmov mmx longrun lrti constant_tsc up
bogomips : 1991.79
clflush size : 32
power management:
____________________________________________
/proc/interrupts
CPU0
0: 45655 XT-PIC-XT timer
1: 8 XT-PIC-XT i8042
2: 0 XT-PIC-XT cascade
3: 4 XT-PIC-XT
5: 3 XT-PIC-XT
6: 3 XT-PIC-XT
7: 4 XT-PIC-XT VIA686A, ehci_hcd:usb1
8: 3 XT-PIC-XT rtc0
9: 158 XT-PIC-XT yenta, ohci_hcd:usb2
10: 165 XT-PIC-XT acpi
11: 1 XT-PIC-XT yenta, ohci_hcd:usb3
12: 4 XT-PIC-XT i8042
14: 3949 XT-PIC-XT ide0
15: 0 XT-PIC-XT ath
NMI: 0 Non-maskable interrupts
LOC: 0 Local timer interrupts
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
SPU: 0 Spurious interrupts
ERR: 0
MIS: 0
____________________________________________
/proc/meminfo
MemTotal: 750244 kB
MemFree: 699772 kB
Buffers: 556 kB
Cached: 24368 kB
SwapCached: 0 kB
Active: 8308 kB
Inactive: 18248 kB
Active(anon): 1692 kB
Inactive(anon): 0 kB
Active(file): 6616 kB
Inactive(file): 18248 kB
Unevictable: 0 kB
Mlocked: 0 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 750244 kB
LowFree: 699772 kB
SwapTotal: 1542232 kB
SwapFree: 1542232 kB
Dirty: 8 kB
Writeback: 0 kB
AnonPages: 1692 kB
Mapped: 2720 kB
Slab: 6324 kB
SReclaimable: 4236 kB
SUnreclaim: 2088 kB
PageTables: 112 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 1917352 kB
Committed_AS: 4172 kB
VmallocTotal: 270392 kB
VmallocUsed: 15660 kB
VmallocChunk: 244392 kB
DirectMap4k: 8128 kB
DirectMap4M: 753664 kB
____________________________________________
/proc/modules
ext2 66184 1 - Live 0xefda1000
mbcache 8708 1 ext2, Live 0xefd82000
usbhid 36640 0 - Live 0xefb45000
hid 40704 1 usbhid, Live 0xef74d000
serial_cs 22404 1 - Live 0xef69d000
pcmcia 35532 1 serial_cs, Live 0xef8e5000
ppdev 9348 0 - Live 0xef8cb000
psmouse 55828 0 - Live 0xef75d000
serio_raw 7172 0 - Live 0xef03e000
pcspkr 4352 0 - Live 0xeeffd000
ohci_hcd 25360 0 - Live 0xef730000
video 18704 0 - Live 0xef063000
output 4608 1 video, Live 0xef04a000
wmi 7848 0 - Live 0xef03a000
ehci_hcd 36876 0 - Live 0xef6bd000
yenta_socket 25996 4 - Live 0xefe0f000
rsrc_nonstatic 13056 1 yenta_socket, Live 0xefdfb000
i2c_viapro 9620 0 - Live 0xefdec000
pcmcia_core 34452 4 serial_cs,pcmcia,yenta_socket,rsrc_nonstatic, Live 0xefdd8000
usbcore 136848 4 usbhid,ohci_hcd,ehci_hcd, Live 0xefd18000
parport_pc 37700 0 - Live 0xefcde000
parport 33004 2 ppdev,parport_pc, Live 0xefca9000
via686a 14604 0 - Live 0xefc94000
evdev 11296 0 - Live 0xefc85000
thermal 17180 0 - Live 0xefc75000
processor 41388 2 thermal, Live 0xefc29000
fan 6276 0 - Live 0xefc13000
button 7824 0 - Live 0xefbfb000
battery 12036 0 - Live 0xefbee000
ac 6020 0 - Live 0xefbe1000
snd_via82xx 24728 0 - Live 0xefbad000
gameport 12300 1 snd_via82xx, Live 0xefb96000
snd_ac97_codec 102308 1 snd_via82xx, Live 0xefb59000
snd_mpu401_uart 8704 1 snd_via82xx, Live 0xefb0f000
snd_rawmidi 21504 1 snd_mpu401_uart, Live 0xefaf7000
snd_seq_oss 31872 0 - Live 0xefa63000
snd_seq_midi_event 8192 1 snd_seq_oss, Live 0xefa53000
snd_seq 49968 4 snd_seq_oss,snd_seq_midi_event, Live 0xef85c000
snd_seq_device 8204 3 snd_rawmidi,snd_seq_oss,snd_seq, Live 0xef843000
snd_pcm_oss 40192 0 - Live 0xef837000
snd_pcm 70020 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss, Live 0xef739000
snd_timer 21384 2 snd_seq,snd_pcm, Live 0xef716000
snd_page_alloc 10120 2 snd_via82xx,snd_pcm, Live 0xef6b2000
snd_mixer_oss 16512 1 snd_pcm_oss, Live 0xef6a5000
snd 50852 11 snd_via82xx,snd_ac97_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss, Live 0xef06b000
soundcore 8160 1 snd, Live 0xef04f000
ac97_bus 3584 1 snd_ac97_codec, Live 0xef041000
arc4 3712 2 - Live 0xef010000
ecb 4608 2 - Live 0xef005000
ath9k 252088 0 - Live 0xef994000
mac80211 161184 1 ath9k, Live 0xef7ff000
cfg80211 31760 1 mac80211, Live 0xef014000
led_class 5508 1 ath9k, Live 0xef001000
nvidia 4706452 0 - Live 0xf04d1000 (P)
agpgart 31572 1 nvidia, Live 0xefefe000
i2c_core 22804 2 i2c_viapro,nvidia, Live 0xefee7000
msr 5124 0 - Live 0xefed7000
cpuid 4996 0 - Live 0xefecc000
rtc_cmos 12332 0 - Live 0xefebf000
rtc_core 17564 1 rtc_cmos, Live 0xefe9a000
rtc_lib 4480 1 rtc_core, Live 0xefe8e000
xfs 561864 2 - Live 0xef773000
ide_gd_mod 24580 5 - Live 0xef6ca000
longrun 4232 0 - Live 0xef6b9000
scsi_mod 102164 0 - Live 0xef682000
via82cxxx 8580 4 - Live 0xef052000
ide_pci_generic 5636 0 - Live 0xef046000
ide_core 103112 3 ide_gd_mod,via82cxxx,ide_pci_generic, Live 0xef01e000
____________________________________________
/proc/version
Linux version 2.6.28-ARCH (root@T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Sun Mar 8 10:18:28 UTC 2009
____________________________________________
/proc/pci does not exist
____________________________________________
/proc/iomem
00000000-00001fff : System RAM
00002000-00005fff : reserved
00006000-00006fff : System RAM
00007000-0000ffff : reserved
00010000-0008e7ff : System RAM
0009b800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cdfff : Video ROM
000ce000-000cffff : reserved
000e4000-000fffff : reserved
000f0000-000fffff : System ROM
00100000-2e7effff : System RAM
00100000-0033a796 : Kernel code
0033a797-0043cbdb : Kernel data
00497000-0056cb1f : Kernel bss
015d4000-015d4fff : Local APIC
2e7f0000-2e7fefff : ACPI Tables
2e7ff000-2e7fffff : ACPI Non-volatile Storage
2e800000-2e8fffff : reserved
30000000-33ffffff : PCI CardBus 0000:01
34000000-37ffffff : PCI CardBus 0000:01
38000000-3bffffff : PCI CardBus 0000:05
3c000000-3fffffff : PCI CardBus 0000:05
40000000-4000ffff : 0000:00:05.0
40010000-4001ffff : 0000:00:08.0
40020000-40020fff : 0000:00:0b.0
40020000-40020fff : yenta_socket
40021000-40021fff : 0000:00:0b.1
40021000-40021fff : yenta_socket
a0000000-a0000fff : pcmcia_socket1
e8000000-e801ffff : 0000:00:08.0
e8020000-e8020fff : 0000:00:08.0
e8021000-e80210ff : 0000:00:0c.2
e8021000-e80210ff : ehci_hcd
e8022000-e8022fff : 0000:00:0c.0
e8022000-e8022fff : ohci_hcd
e8023000-e8023fff : 0000:00:0c.1
e8023000-e8023fff : ohci_hcd
e8030000-e803ffff : 0000:00:0a.0
e8030000-e803ffff : ath9k
e8100000-e81fffff : 0000:00:00.0
e9000000-e9ffffff : 0000:00:05.0
e9000000-e9ffffff : nvidia
f0000000-f7ffffff : 0000:00:05.0
f0000000-f0ffffff : vesafb
fff80000-ffffffff : reserved
fffc0000-ffffffff : pnp 00:05
____________________________________________
/proc/mtrr does not exist
____________________________________________
/etc/issue
[H[2J
Arch Linux \r (\n) (\l)
____________________________________________
/var/log/nvidia-installer.log does not exist
____________________________________________
/var/log/XFree86.0.log does not exist
____________________________________________
/var/log/Xorg.0.log
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux tc1000 2.6.28-ARCH #1 SMP PREEMPT Sun Mar 8 10:18:28 UTC 2009 i586
Build Date: 17 December 2008 08:20:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 14 22:57:04 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "USB Mouse"
(**) |-->Input Device "PEN"
(**) Option "AllowMouseOpenFail" "true"
(**) Option "AutoAddDevices" "false"
(**) Not automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/cyrillic,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is disabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d5fe0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 4
(--) PCI:*(0@0:5:0) nVidia Corporation NV11 [GeForce2 Go] rev 178, Mem @ 0xe9000000/0, 0xf0000000/0, BIOS @ 0x????????/65536
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 96.43.11 Mon Feb 23 15:43:14 PST 2009
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "tc1kpen"
(II) Loading /usr/lib/xorg/modules/input//tc1kpen_drv.so
(II) Module tc1kpen: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) NVIDIA dlloader X Driver 96.43.11 Mon Feb 23 15:32:04 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 00@00:05:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16
(==) NVIDIA(0): RGB weight 565
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "true"
(**) NVIDIA(0): Option "NvAGP" "1"
(**) NVIDIA(0): Option "ConnectedMonitor" "DFP"
(**) NVIDIA(0): Option "RenderAccel" "on"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "true"
(**) NVIDIA(0): Option "DisableGLXRootClipping" "true"
(**) NVIDIA(0): Enabling RENDER acceleration
(**) NVIDIA(0): ConnectedMonitor string: "DFP"
(**) NVIDIA(0): Use of NVIDIA internal AGP requested
____________________________________________
/etc/X11/xorg.conf
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "USB Mouse" "CorePointer"
InputDevice "PEN"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AutoAddDevices" "false"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
# Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
# Load "type1"
Load "freetype"
# Load "record"
# Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "PEN"
Driver "tc1kpen"
Option "Device" "/dev/ttyS0"
Option "CoordMaxX" "8550"
Option "CoordMinX" "190"
Option "CoordMaxY" "6520"
Option "CoordMinY" "190"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
# Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "All"
BoardName "All"
Option "NoLogo" "true"
Option "OnDemandVBlankInterrupts" "true"
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
Option "ConnectedMonitor" "DFP"
Option "RenderAccel" "on"
Option "AddARGBGLXVisuals" "true"
Option "DisableGLXRootClipping" "true"
Option "NvAGP" "1"
Option "Accel" "false"
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
#Section "DRI"
# Mode 0666
#EndSection
____________________________________________
ldd /usr/bin/glxinfo
linux-gate.so.1 => (0xb7fe1000)
libGL.so.1 => /usr/lib/libGL.so.1 (0xb7f41000)
libm.so.6 => /lib/libm.so.6 (0xb7f1b000)
libc.so.6 => /lib/libc.so.6 (0xb7dd4000)
libX11.so.6 => /usr/lib/libX11.so.6 (0xb7cb7000)
libGLcore.so.1 => /usr/lib/libGLcore.so.1 (0xb7431000)
libnvidia-tls.so.1 => /usr/lib/libnvidia-tls.so.1 (0xb742f000)
libXext.so.6 => /usr/lib/libXext.so.6 (0xb741f000)
libdl.so.2 => /lib/libdl.so.2 (0xb741b000)
/lib/ld-linux.so.2 (0xb7fe2000)
libxcb.so.1 => /usr/lib/libxcb.so.1 (0xb7402000)
libXau.so.6 => /usr/lib/libXau.so.6 (0xb73ff000)
libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0xb73fa000)
____________________________________________
/usr/sbin/lspci -d "10de:*" -v -xxx
00:05.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 Go] (rev b2) (prog-if 00 [VGA controller])
Subsystem: Compaq Computer Corporation Device 00b5
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
Memory at e9000000 (32-bit, non-prefetchable) [size=16M]
Memory at f0000000 (32-bit, prefetchable) [size=128M]
[virtual] Expansion ROM at 40000000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Kernel driver in use: nvidia
Kernel modules: rivafb, nvidiafb, nvidia
00: de 10 12 01 07 00 b0 02 b2 00 00 03 00 40 00 00
10: 00 00 00 e9 08 00 00 f0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 11 0e b5 00
30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 05 01
40: 11 0e b5 00 02 00 20 00 07 00 00 1f 00 00 00 00
50: 01 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00
60: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
____________________________________________
/usr/sbin/lspci -t
-[0000:00]-+-00.0
+-00.1
+-00.2
+-05.0
+-07.0
+-07.1
+-07.4
+-07.5
+-08.0
+-0a.0
+-0b.0
+-0b.1
+-0c.0
+-0c.1
\-0c.2
____________________________________________
/usr/sbin/dmidecode
# dmidecode 2.10
SMBIOS 2.3 present.
20 structures occupying 771 bytes.
Table at 0x000E7010.
Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
Vendor: Phoenix
Version: 4.06CJ15
Release Date: 10/06/2003
Address: 0xE8250
Runtime Size: 97712 bytes
ROM Size: 512 kB
Characteristics:
PCI is supported
PC Card (PCMCIA) is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
ACPI is supported
USB legacy is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
Smart battery is supported
BIOS boot specification is supported
Handle 0x0001, DMI type 1, 25 bytes
System Information
Manufacturer: Compaq
Product Name: Compaq Tablet PC TC1000
Version: 0F13
Serial Number: 5Y2BLBQZM06Z
UUID: 00771881-0C64-0010-A02F-34930885D83B
Wake-up Type: Power Switch
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Compaq
Product Name: 0828
Version: 19.29
Serial Number: 5Y2BLBQZM06Z
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: Compaq
Type: Sub Notebook
Lock: Not Present
Version: N/A
Serial Number: None
Asset Tag: 5Y2BLBQZM06Z
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00001234
Handle 0x0004, DMI type 4, 32 bytes
Processor Information
Socket Designation: BGA-474
Type: Central Processor
Family: K6-3
Manufacturer: GenuineTMx86
ID: 43 05 00 00 3F 89 80 00
Signature: Family 5, Model 4, Stepping 3
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
CX8 (CMPXCHG8 instruction supported)
SEP (Fast system call)
CMOV (Conditional move instruction supported)
MMX (MMX technology supported)
Version: Transmeta(tm) Cru
Voltage: 3.3 V
External Clock: Unknown
Max Speed: 1000 MHz
Current Speed: 1000 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 256 kB
Maximum Size: 256 kB
Supported SRAM Types:
Burst
Pipeline Burst
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: External
Installed Size: 512 kB
Maximum Size: 512 kB
Supported SRAM Types:
Burst
Pipeline Burst
Synchronous
Installed SRAM Type: None
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0007, DMI type 9, 13 bytes
System Slot Information
Designation: Mini PCI Slot 1
Type: 32-bit PCI
Current Usage: Unknown
Length: Long
ID: 0
Characteristics:
3.3 V is provided
PME signal is supported
Handle 0x0008, DMI type 10, 12 bytes
On Board Device 1 Information
Type: Video
Status: Enabled
Description: nVidia GeForce2 Go
On Board Device 2 Information
Type: Sound
Status: Enabled
Description: AC97 AD Audio
On Board Device 3 Information
Type: Ethernet
Status: Enabled
Description: Internal Ethernet
On Board Device 4 Information
Type: Other
Status: Enabled
Description: Ti 1520 Cardbus
Handle 0x0009, DMI type 11, 5 bytes
OEM Strings
String 1: no Ownership Tag - limited to 40 chars
String 2: 0123456789012345678901234567890123456789
Handle 0x000A, DMI type 15, 29 bytes
System Event Log
Area Length: 16 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: General-purpose non-volatile data functions
Access Address: 0x0000
Status: Valid, Not Full
Change Token: 0x00000072
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: Single-bit ECC memory error
Data Format 2: Multiple-event
Descriptor 3: Multi-bit ECC memory error
Data Format 3: Multiple-event
Handle 0x000B, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 1 GB
Error Information Handle: Not Provided
Number Of Devices: 3
Handle 0x000C, DMI type 17, 23 bytes
Memory Device
Array Handle: 0x000B
Error Information Handle: No Error
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: 1
Locator: M1
Bank Locator: Bank 0
Type: DRAM
Type Detail: Unknown
Speed: Unknown
Handle 0x000D, DMI type 17, 23 bytes
Memory Device
Array Handle: 0x000B
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: 1
Locator: M2
Bank Locator: Bank 1
Type: DRAM
Type Detail: Synchronous
Speed: Unknown
Handle 0x000E, DMI type 17, 23 bytes
Memory Device
Array Handle: 0x000B
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 232 MB
Form Factor: DIMM
Set: 1
Locator: M3
Bank Locator: CMS
Type: DRAM
Type Detail: Synchronous
Speed: Unknown
Handle 0x000F, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0002E7FFFFF
Range Size: 744 MB
Physical Array Handle: 0x000B
Partition Width: 0
Handle 0x0010, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000000003FF
Range Size: 1 kB
Physical Device Handle: 0x000C
Memory Array Mapped Address Handle: 0x000F
Partition Row Position: 1
Handle 0x0011, DMI type 32, 20 bytes
System Boot Information
Status: No errors detected
Handle 0x0012, DMI type 126, 4 bytes
Inactive
Handle 0x0013, DMI type 127, 4 bytes
End Of Table
____________________________________________
/sbin/modinfo nvidia | grep vermagic
vermagic: 2.6.28-ARCH SMP preempt mod_unload 686
____________________________________________
Scanning kernel log files for NVRM messages:
/var/log/kernel.log:
Mar 14 22:59:31 tc1000 kernel: NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.11 Mon Feb 23 15:29:05 PST 2009
Mar 14 22:59:31 tc1000 kernel: NVRM: CPU does not support the PAT, falling back to MTRRs.
____________________________________________
dmesg:
BIOS EBDA/lowmem at: 0009b800/0009b800
Linux version 2.6.28-ARCH (root@T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Sun Mar 8 10:18:28 UTC 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
PAT not supported by CPU.
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002e7f0000 (usable)
BIOS-e820: 000000002e7f0000 - 000000002e7ff000 (ACPI data)
BIOS-e820: 000000002e7ff000 - 000000002e800000 (ACPI NVS)
BIOS-e820: 000000002e800000 - 000000002e900000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
DMI 2.3 present.
last_pfn = 0x2e7f0 max_arch_pfn = 0x100000
Scanning 2 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000006000 (reserved)
modified: 0000000000006000 - 0000000000007000 (usable)
modified: 0000000000007000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000008e800 (usable)
modified: 000000000009b800 - 00000000000a0000 (reserved)
modified: 00000000000ce000 - 00000000000d0000 (reserved)
modified: 00000000000e4000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000002e7f0000 (usable)
modified: 000000002e7f0000 - 000000002e7ff000 (ACPI data)
modified: 000000002e7ff000 - 000000002e800000 (ACPI NVS)
modified: 000000002e800000 - 000000002e900000 (reserved)
modified: 00000000fff80000 - 0000000100000000 (reserved)
kernel direct mapping tables up to 2e7f0000 @ 10000-16000
RAMDISK: 2e724000 - 2e7dfcc0
ACPI: RSDP 000F76D0, 0014 (r0 PTLTD )
ACPI: RSDT 2E7FBC01, 0028 (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 2E7FBC29, 0074 (r1 Compaq 00B5 6040000 PTL 1000000)
ACPI: DSDT 2E7FBC9D, 3363 (r1 COMPAQ 00B5 6040000 MSFT 100000E)
ACPI: FACS 2E7FFFC0, 0040
0MB HIGHMEM available.
743MB LOWMEM available.
mapped low ram: 0 - 2e7f0000
low ram: 00000000 - 2e7f0000
bootmap 00012000 - 00017d00
(9 early reservations) ==> bootmem [0000000000 - 002e7f0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 000056cb20] TEXT DATA BSS ==> [0000100000 - 000056cb20]
#4 [002e724000 - 002e7dfcc0] RAMDISK ==> [002e724000 - 002e7dfcc0]
#5 [000056d000 - 0000570000] INIT_PG_TABLE ==> [000056d000 - 0000570000]
#6 [000009b800 - 0000100000] BIOS reserved ==> [000009b800 - 0000100000]
#7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#8 [0000012000 - 0000018000] BOOTMAP ==> [0000012000 - 0000018000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x0002e7f0
HighMem 0x0002e7f0 -> 0x0002e7f0
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000000 -> 0x00000002
0: 0x00000006 -> 0x00000007
0: 0x00000010 -> 0x0000008e
0: 0x00000100 -> 0x0002e7f0
On node 0 totalpages: 190321
free_area_init_node: node 0, pgdat c0415a00, node_mem_map c1000000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3937 pages, LIFO batch:0
Normal zone: 1456 pages used for memmap
Normal zone: 184896 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x8008
SMP: Allowing 1 CPUs, 0 hotplug CPUs
No local APIC present or hardware disabled
PM: Registered nosave memory: 0000000000002000 - 0000000000006000
PM: Registered nosave memory: 0000000000007000 - 0000000000010000
PM: Registered nosave memory: 000000000008e000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
PM: Registered nosave memory: 00000000000d0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 30000000 (gap: 2e900000:d1680000)
PERCPU: Allocating 36864 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 1, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 188833
Kernel command line: root=/dev/disk/by-uuid/42a35f39-b420-49e4-aaa4-72b3ac8a0235 ro vga=792
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: PIT calibration matches PMTIMER. 2 loops
Detected 995.421 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Scanning for low memory corruption every 60 seconds
Memory: 748956k/761792k available (2281k kernel code, 12136k reserved, 1033k data, 336k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xeeff0000 - 0xff7fe000 ( 264 MB)
lowmem : 0xc0000000 - 0xee7f0000 ( 743 MB)
.init : 0xc0443000 - 0xc0497000 ( 336 kB)
.data : 0xc033a797 - 0xc043cbdc (1033 kB)
.text : 0xc0100000 - 0xc033a797 (2281 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 1991.79 BogoMIPS (lpj=3318070)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 512K (128 bytes/line)
CPU: Processor revision 1.4.1.0, 1000 MHz
CPU: Code Morphing Software revision 4.3.3-9-510
CPU: 20020910 22:28 official release 4.3.3#5
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 9k freed
ACPI: Core revision 20080926
ACPI: Checking initramfs for custom DSDT
ACPI: setting ELCR to 0400 (from 0e00)
weird, boot CPU (#0) not listedby the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (1991.79 BogoMIPS).
net_namespace: 768 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd80c, last bus=0
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x1, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xe8100000-0xe81fffff]
pci 0000:00:05.0: reg 10 32bit mmio: [0xe9000000-0xe9ffffff]
pci 0000:00:05.0: reg 14 32bit mmio: [0xf0000000-0xf7ffffff]
pci 0000:00:05.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:00:07.1: reg 20 io port: [0x1040-0x104f]
pci 0000:00:07.4: quirk: region 6800-687f claimed by vt82c686 HW-mon
pci 0000:00:07.4: quirk: region 8100-810f claimed by vt82c686 SMB
pci 0000:00:07.5: reg 10 io port: [0x1400-0x14ff]
pci 0000:00:07.5: reg 14 io port: [0x1054-0x1057]
pci 0000:00:07.5: reg 18 io port: [0x1050-0x1053]
pci 0000:00:08.0: reg 10 32bit mmio: [0xe8020000-0xe8020fff]
pci 0000:00:08.0: reg 14 io port: [0x1000-0x103f]
pci 0000:00:08.0: reg 18 32bit mmio: [0xe8000000-0xe801ffff]
pci 0000:00:08.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:00:08.0: supports D1 D2
pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:08.0: PME# disabled
pci 0000:00:0a.0: reg 10 32bit mmio: [0xe8030000-0xe803ffff]
pci 0000:00:0b.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:00:0b.0: supports D1 D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0b.1: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:00:0b.1: supports D1 D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: PME# disabled
pci 0000:00:0c.0: reg 10 32bit mmio: [0xe8022000-0xe8022fff]
pci 0000:00:0c.0: supports D1 D2
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0c.1: reg 10 32bit mmio: [0xe8023000-0xe8023fff]
pci 0000:00:0c.1: supports D1 D2
pci 0000:00:0c.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.1: PME# disabled
pci 0000:00:0c.2: reg 10 32bit mmio: [0xe8021000-0xe80210ff]
pci 0000:00:0c.2: supports D1 D2
pci 0000:00:0c.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.2: PME# disabled
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *9)
ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 7) *10
ACPI: PCI Interrupt Link [LNKD] (IRQs 15) *0, disabled.
ACPI: Power Resource [LRP0] (off)
ACPI: Power Resource [LRP1] (off)
ACPI: Power Resource [LRP2] (off)
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: ioport range 0x3810-0x381f has been reserved
system 00:05: ioport range 0x4d0-0x4d1 has been reserved
system 00:05: ioport range 0x4d6-0x4d6 has been reserved
system 00:05: ioport range 0x480-0x48f has been reserved
system 00:05: ioport range 0x40b-0x40b has been reserved
system 00:05: iomem range 0xfffc0000-0xffffffff has been reserved
system 00:07: ioport range 0x8000-0x807f has been reserved
system 00:07: ioport range 0x6800-0x687f has been reserved
pci 0000:00:0b.0: CardBus bridge, secondary bus 0000:01
pci 0000:00:0b.0: IO window: 0x001800-0x0018ff
pci 0000:00:0b.0: IO window: 0x001c00-0x001cff
pci 0000:00:0b.0: PREFETCH window: 0x30000000-0x33ffffff
pci 0000:00:0b.0: MEM window: 0x34000000-0x37ffffff
pci 0000:00:0b.1: CardBus bridge, secondary bus 0000:05
pci 0000:00:0b.1: IO window: 0x002000-0x0020ff
pci 0000:00:0b.1: IO window: 0x002400-0x0024ff
pci 0000:00:0b.1: PREFETCH window: 0x38000000-0x3bffffff
pci 0000:00:0b.1: MEM window: 0x3c000000-0x3fffffff
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
pci 0000:00:0b.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
pci 0000:00:0b.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:00:0b.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
pci 0000:00:0b.1: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 01 index 0 io port: [0x1800-0x18ff]
bus: 01 index 1 io port: [0x1c00-0x1cff]
bus: 01 index 2 mmio: [0x30000000-0x33ffffff]
bus: 01 index 3 mmio: [0x34000000-0x37ffffff]
bus: 05 index 0 io port: [0x2000-0x20ff]
bus: 05 index 1 io port: [0x2400-0x24ff]
bus: 05 index 2 mmio: [0x38000000-0x3bffffff]
bus: 05 index 3 mmio: [0x3c000000-0x3fffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 751k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1237071532.040:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1464
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:05.0: Boot video device
pci 0000:00:07.0: Disabling VIA external APIC routing
pci 0000:00:08.0: Firmware left e100 interrupts enabled; disabling
vesafb: framebuffer at 0xf0000000, mapped to 0xef080000, using 6144k, total 16384k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: protected mode interface info at c000:daa0
vesafb: pmi: set display start = c00cdae5, set palette = c00cdb6a
vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
serial 00:06: activated
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /class/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
IO APIC resources could be not be allocated.
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 336k freed
input: AT Translated Set 2 keyboard as /class/input/input1
Uniform Multi-Platform E-IDE driver
via82cxxx 0000:00:07.1: VIA vt82c686b (rev 40) IDE UDMA100
via82cxxx 0000:00:07.1: IDE controller (0x1106:0x0571 rev 0x06)
VIA_IDE 0000:00:07.1: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
VIA_IDE 0000:00:07.1: VIA VLink IRQ fixup, from 0 to 9
via82cxxx 0000:00:07.1: IDE port disabled
via82cxxx 0000:00:07.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1040-0x1047
Probing IDE interface ide0...
hda: ST9160821A, ATA DISK drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
SCSI subsystem initialized
ide-gd driver 1.18
hda: max request size: 512KiB
hda: Host Protected Area detected.
current capacity is 268435455 sectors (137438 MB)
native capacity is 312581808 sectors (160041 MB)
hda: Host Protected Area disabled.
hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS mounting filesystem hda3
Starting XFS recovery on filesystem: hda3 (logdev: internal)
Ending XFS recovery on filesystem: hda3 (logdev: internal)
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram
Linux agpgart interface v0.103
nvidia: module license 'NVIDIA' taints kernel.
nvidia 0000:00:05.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.11 Mon Feb 23 15:29:05 PST 2009
NVRM: CPU does not support the PAT, falling back to MTRRs.
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
ath9k: 0.1
ath9k 0000:00:0a.0: enabling device (0010 -> 0012)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 15
PCI: setting IRQ 15 as level-triggered
ath9k 0000:00:0a.0: PCI INT A -> Link[LNKD] -> GSI 15 (level, low) -> IRQ 15
phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0:radio
Registered led device: ath9k-phy0:assoc
Registered led device: ath9k-phy0:tx
Registered led device: ath9k-phy0:rx
phy0: Atheros 5416: mem=0xefaa0000, irq=15
VIA 82xx Audio 0000:00:07.5: enabling device (0000 -> 0001)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
VIA 82xx Audio 0000:00:07.5: PCI INT C -> Link[LNKC] -> GSI 7 (level, low) -> IRQ 7
VIA 82xx Audio 0000:00:07.5: VIA VLink IRQ fixup, from 255 to 7
VIA 82xx Audio 0000:00:07.5: setting latency timer to 64
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
ACPI: EC: missing confirmations, switch off interrupt mode.
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [CMB0] (battery present)
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN0] (off)
fan PNP0C0B:01: registered as cooling_device1
ACPI: Fan [FAN1] (off)
fan PNP0C0B:02: registered as cooling_device2
ACPI: Fan [FAN2] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2])
processor ACPI_CPU:00: registered as cooling_device3
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (54 C)
Marking TSC unstable due to TSC halts in idle
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x0
parport_pc: VIA parallel port disabled in BIOS
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
yenta_cardbus 0000:00:0b.0: CardBus bridge found [0e11:00b5]
yenta_cardbus 0000:00:0b.0: Enabling burst memory read transactions
yenta_cardbus 0000:00:0b.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:00:0b.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:00:0b.0: TI: mfunc 0x01001022, devctl 0x64
usbcore: registered new device driver usb
yenta_cardbus 0000:00:0b.0: ISA IRQ mask 0x0068, PCI irq 9
yenta_cardbus 0000:00:0b.0: Socket status: 30000006
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:0c.2: PCI INT C -> Link[LNKC] -> GSI 7 (level, low) -> IRQ 7
ehci_hcd 0000:00:0c.2: EHCI Host Controller
ehci_hcd 0000:00:0c.2: new USB bus registered, assigned bus number 1
ACPI: WMI: Mapper loaded
ehci_hcd 0000:00:0c.2: irq 7, io mem 0xe8021000
ehci_hcd 0000:00:0c.2: USB 2.0 started, EHCI 0.95
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
yenta_cardbus 0000:00:0b.1: CardBus bridge found [0e11:00b5]
yenta_cardbus 0000:00:0b.1: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:00:0b.1: Routing CardBus interrupts to PCI
yenta_cardbus 0000:00:0b.1: TI: mfunc 0x01001022, devctl 0x64
input: Video Bus as /class/input/input4
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: Video Device [VIDO] (multi-head: yes rom: no post: no)
yenta_cardbus 0000:00:0b.1: ISA IRQ mask 0x0068, PCI irq 11
yenta_cardbus 0000:00:0b.1: Socket status: 30000010
ohci_hcd 0000:00:0c.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
ohci_hcd 0000:00:0c.0: OHCI Host Controller
ohci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0c.0: irq 9, io mem 0xe8022000
input: PC Speaker as /class/input/input5
pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1
Error: Driver 'pcspkr' is already registered, aborting...
ppdev: user-space parallel port driver
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:00:0c.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:0c.1: OHCI Host Controller
ohci_hcd 0000:00:0c.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:0c.1: irq 11, io mem 0xe8023000
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: clean.
pcmcia 1.0: pcmcia: registering new device pcmcia1.0
ttyS1: detected caps 00000700 should be 00000100
1.0: ttyS1 at I/O 0x100 (irq = 3) is a 16C950/954
usb 2-2: new low speed USB device using ohci_hcd and address 2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 2-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Jing-Mold USB K/B+Mouse as /class/input/input6
generic-usb 0003:05AF:080A.0001: input,hidraw0: USB HID v1.10 Keyboard [Jing-Mold USB K/B+Mouse] on usb-0000:00:0c.0-2/input0
input: Jing-Mold USB K/B+Mouse as /class/input/input7
generic-usb 0003:05AF:080A.0002: input,hidraw1: USB HID v1.10 Mouse [Jing-Mold USB K/B+Mouse] on usb-0000:00:0c.0-2/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
XFS mounting filesystem hda4
Starting XFS recovery on filesystem: hda4 (logdev: internal)
Ending XFS recovery on filesystem: hda4 (logdev: internal)
Adding 1542232k swap on /dev/hda2. Priority:-1 extents:1 across:1542232k
warning: `syslog-ng' uses 32-bit capabilities (legacy support in use)
____________________________________________
Using built-in specs.
Target: i686-pc-linux-gnu
Configured with: ../configure --prefix=/usr --enable-shared --enable-languages=c,c++,fortran,objc,obj-c++,treelang --enable-threads=posix --mandir=/usr/share/man --infodir=/usr/share/info --enable-__cxa_atexit --disable-multilib --libdir=/usr/lib --libexecdir=/usr/lib --enable-clocale=gnu --disable-libstdcxx-pch --with-tune=generic
Thread model: posix
gcc version 4.3.3 (GCC)
____________________________________________
Using built-in specs.
Target: i686-pc-linux-gnu
Configured with: ../configure --prefix=/usr --enable-shared --enable-languages=c,c++,fortran,objc,obj-c++,treelang --enable-threads=posix --mandir=/usr/share/man --infodir=/usr/share/info --enable-__cxa_atexit --disable-multilib --libdir=/usr/lib --libexecdir=/usr/lib --enable-clocale=gnu --disable-libstdcxx-pch --with-tune=generic
Thread model: posix
gcc version 4.3.3 (GCC)
____________________________________________
xset -q:
____________________________________________
nvidia-settings -q all:
nvidia-settings could not connect to an X server
____________________________________________
End of NVIDIA bug report log file.Offline
#3 2009-03-14 23:33:28
- Ranguvar
- Member
- Registered: 2008-08-12
- Posts: 2,549
Re: GeForce2 Go & nvidia 96.43.11 & 2.6.28-ARCH
Woah. Use code tags or PasteBin or something 
Anyways, don't using NVIDIA's drivers from their site. Pacman can install the drivers for you, which means everything is managed cleanly and you get automatic updates. The Wiki has more info in the Beginner's Guide, the pages for NVIDIA and X, etc.
pacman -S nvidia=96xx
Offline
#4 2009-03-15 00:46:42
- daybat
- Member
- Registered: 2009-03-14
- Posts: 5
Re: GeForce2 Go & nvidia 96.43.11 & 2.6.28-ARCH
yes, I installed nvidia by pacman. and the result is the same - no X session. black screen.
Offline
#5 2009-03-15 04:22:58
- Ranguvar
- Member
- Registered: 2008-08-12
- Posts: 2,549
Re: GeForce2 Go & nvidia 96.43.11 & 2.6.28-ARCH
Oh, sorry, my fault - I didn't see the end of your post, I assumed it was all log. Okay, so we can go from there.
Googling around for 'tc1000 linux' I'm finding quite a bit talking about problems with X. Can you try the nv driver (or maybe nouveau if they support that card, I don't know)? That may or may not be a long-term solution. That Google should also turn up some stuff on getting the NVIDIA driver working, but it's cryptic to me, too..
Offline
#6 2009-03-15 14:14:48
- daybat
- Member
- Registered: 2009-03-14
- Posts: 5
Re: GeForce2 Go & nvidia 96.43.11 & 2.6.28-ARCH
yes, nv driver works fine. but it does not support rotation. and during switching to CTRL-ALT-F2 there is blinking on the screen. There is no problem with nvidia driver.
I need either to start workin nvidia.ko from legacy 96.43.11 driver or to be able to compile 7185 (the only one that works fine with my GeForce 2 Go card)
Offline
#7 2009-03-15 19:59:50
- grndrush
- Member
- From: Hamilton, Ontario, Canada
- Registered: 2003-12-28
- Posts: 136
- Website
Re: GeForce2 Go & nvidia 96.43.11 & 2.6.28-ARCH
> yes, I installed nvidia by pacman. and the result is the same - no X session. black screen.
It was too late by then. The reason for using the Arch driver pkg is that it knows where to put things on an Arch Linux system. NVidia doesn't. The NV Installer - which offers NO *de-install* - trashed your file system, writing a good number of critical files to the WRONG critical places.
This is a not-that-uncommon mistake made users new to Arch, and I know of no one who's reported back having success recovering from that mistake. I've tried to help a few, myself, having long used NV drivers w/Linux. If any of them worked the issue through, they never reported back about it.
Sorry. 
Offline
#8 2009-03-16 23:39:56
- daybat
- Member
- Registered: 2009-03-14
- Posts: 5
Re: GeForce2 Go & nvidia 96.43.11 & 2.6.28-ARCH
Hello @grndrush!
Do you mean if I reinstall the ARCH and install nvidia driver via pacman (no nv or nvidia drivers from download.nvidia.com) the system could be usable?
Offline
#9 2009-03-23 07:00:09
- grndrush
- Member
- From: Hamilton, Ontario, Canada
- Registered: 2003-12-28
- Posts: 136
- Website
Re: GeForce2 Go & nvidia 96.43.11 & 2.6.28-ARCH
daybat -
Sorry to be slow replying.
Yes, that should work fine. Most aren't willing to do a full reinstall - therein being the problem.
Offline