You are not logged in.

Pages: 1

#1 2009-04-16 11:50:22

dswann
Member
Registered: 2009-03-13
Posts: 29

Minimal xorg.conf

Having zero problems with the new xorg server 1.6.1.. and finally decided to get around to trimming my xorg.conf file:

  GNU nano 2.0.9     File: /etc/X11/xorg.conf

# nvidia-xconfig: X configuration file generated by nvidia-xc$
# nvidia-xconfig:  version 1.0  (buildmeister@builder62)  Thu$
Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
EndSection

Section "Files"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "AddARGBGLXVisuals" "True"
    Option         "NoLogo" "True"
    Option         "RenderAccel" "True"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Extensions"
    Option         "Composite" "Enable"
EndSection

And my xorg.0.log

X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH x86_64 
Current Operating System: Linux arch 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:39:28 CEST 2009 x86_64
Build Date: 15 April 2009  11:01:49AM
 
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 15 23:04:12 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Device0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
(==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x15c0
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@1:0:0) nVidia Corporation G71 [GeForce 7900 GT/GTO] rev 161, Mem @ 0xf4000000/16777216, 0xe0000000/268435456, 0xf5000000/16777216, I/O @ 0x0000a000/128, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
(II) NVIDIA GLX Module  180.44  Tue Mar 24 06:11:47 PST 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver  180.44  Tue Mar 24 05:51:43 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "RenderAccel" "True"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 7900 GT/GTO (G71) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 05.71.22.12.07
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 7900 GT/GTO at
(--) NVIDIA(0):     PCI:1:0:0:
(--) NVIDIA(0):     DELL 2005FPW (DFP-0)
(--) NVIDIA(0): DELL 2005FPW (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): DELL 2005FPW (DFP-0): Internal Dual Link TMDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(==) NVIDIA(0): 
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0):     will be used as the requested mode.
(==) NVIDIA(0): 
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
(--) NVIDIA(0): DPI set to (99, 98); computed from "UseEdidDpi" X config
(--) NVIDIA(0):     option
(**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0):     configuration option may not be set correctly.  When the
(II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
(II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
(II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0):     Config Options in the README.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.2.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event8"
(II) Logitech USB Receiver: Found 32 mouse buttons
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as mouse
(II) Logitech USB Receiver: Configuring as keyboard
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) filter chain progression: 2.00
(**) Logitech USB Receiver: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Receiver: (accel) set acceleration profile 0
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event4"
(II) Logitech USB Receiver: Found 16 mouse buttons
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Configuring as mouse
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) filter chain progression: 2.00
(**) Logitech USB Receiver: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Receiver: (accel) set acceleration profile 0
(II) config/hal: Adding input device Microsoft Microsoft Wheel Mouse Optical?
(**) Microsoft Microsoft Wheel Mouse Optical?: always reports core events
(**) Microsoft Microsoft Wheel Mouse Optical?: Device: "/dev/input/event6"
(II) Microsoft Microsoft Wheel Mouse Optical?: Found 3 mouse buttons
(II) Microsoft Microsoft Wheel Mouse Optical?: Found x and y relative axes
(II) Microsoft Microsoft Wheel Mouse Optical?: Found scroll wheel(s)
(II) Microsoft Microsoft Wheel Mouse Optical?: Configuring as mouse
(**) Microsoft Microsoft Wheel Mouse Optical?: YAxisMapping: buttons 4 and 5
(**) Microsoft Microsoft Wheel Mouse Optical?: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Microsoft Wheel Mouse Optical?" (type: MOUSE)
(**) Microsoft Microsoft Wheel Mouse Optical?: (accel) keeping acceleration scheme 1
(**) Microsoft Microsoft Wheel Mouse Optical?: (accel) filter chain progression: 2.00
(**) Microsoft Microsoft Wheel Mouse Optical?: (accel) filter stage 0: 20.00 ms
(**) Microsoft Microsoft Wheel Mouse Optical?: (accel) set acceleration profile 0
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event7"
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0):     configuration option may not be set correctly.  When the
(II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
(II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
(II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0):     Config Options in the README.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Logitech USB Receiver: Device reopened after 1 attempts.
(II) Logitech USB Receiver: Device reopened after 1 attempts.
(II) Microsoft Microsoft Wheel Mouse Optical?: Device reopened after 1 attempts.
(II) Logitech USB Receiver: Device reopened after 1 attempts.

Any suggestions on what can be took out?

Thanks!

Offline

#2 2009-04-16 12:04:41

uastasi
Member
From: Salento - Italy
Registered: 2007-11-27
Posts: 247

Re: Minimal xorg.conf

The only warning displayed is about fonts, so you could try to add this section to the file:

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "freetype"
    Load           "glx"
EndSection

Take it as a starting point, I'm not sure that it works wink

Till the last battle, till the last bottle.
aur - twitter

Offline

#3 2009-04-16 12:06:31

EVRAMP
Member
From: Czech Republic
Registered: 2008-10-03
Posts: 173
Website

Re: Minimal xorg.conf

If you want to use a proprietary driver, you must keeṕ the device section (with the name of driver/module):

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Everything else is not needed.

Offline

#4 2009-04-16 13:22:25

dswann
Member
Registered: 2009-03-13
Posts: 29

Re: Minimal xorg.conf

uastasi wrote:

The only warning displayed is about fonts, so you could try to add this section to the file:

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "freetype"
    Load           "glx"
EndSection

Take it as a starting point, I'm not sure that it works wink

I had that section in my original xorg.conf file but after studying the xorg.0.log I saw that those lines were not needed in the .conf as you can see, they are are being loaded by default.

Offline

#5 2009-04-16 18:26:03

gav616
Member
Registered: 2008-01-16
Posts: 182

Re: Minimal xorg.conf

i created a thread about this,

the commented out lines are stuff i have compiled xorg with 'disable' flags for each extension;
for example; --disable-composite --disable-XINERAMA


#Section "ServerLayout"
#Identifier "l0"
#Screen 0 "s0" 0 0
#Option "AIGLX" "0"
#EndSection

Section "ServerFlags"
Option "AutoAddDevices" "0"
Option "DontZap" "0"
Option "NoPM" "1"
EndSection

Section "InputDevice"
Identifier "i0"
Driver "mouse"
Option "ConstantDeceleration" "2"
Option "ExpectedRate" "1000"
Option "VelocityScale" "1"
Option "Emulate3Buttons" "0"
Option "VelocityReset" "500"
EndSection

Section "Device"
Identifier "v0"
Driver "radeon"
EndSection

Section "Screen"
Identifier "s0"
Device "v0"
EndSection

#Section "Extensions"
#Option "Composite" "0"
#Option "XINERAMA" "0"
#Option "MIT-SCREEN-SAVER" "0"
#EndSection

TBH i think the  'xorg.conf' is on its way out, i set most of my stuff beacuse it needs to be set, i would prefer xorg just to auto detect everything and set other little stuff in user land, for example;

#!/bin/sh
#
# ~/.xinitrc
#

# X Options
setxkbmap -layout gb
xset m 1 0
xset -b
xset -s off
xset +dpms
xset dpms force on
xrandr -r 75
xrandr --dpi 96
xgamma -gamma 1.0

# Apps to run
numlockx
bmpanel archack &
urxvtd -q -f -o &
conky &

# Run box
exec openbox

Last edited by gav616 (2009-04-16 18:29:44)

Offline

#6 2009-04-17 02:04:48

dswann
Member
Registered: 2009-03-13
Posts: 29

Re: Minimal xorg.conf

EVRAMP wrote:

If you want to use a proprietary driver, you must keeṕ the device section (with the name of driver/module):

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Everything else is not needed.

Works just fine ! cool

Last edited by dswann (2009-04-17 02:08:34)

Offline

#7 2009-04-17 08:25:46

uastasi
Member
From: Salento - Italy
Registered: 2007-11-27
Posts: 247

Re: Minimal xorg.conf

dswann wrote:
EVRAMP wrote:

If you want to use a proprietary driver, you must keeṕ the device section (with the name of driver/module):

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Everything else is not needed.

Works just fine ! cool

Very impressive cool:cool:

Till the last battle, till the last bottle.
aur - twitter

Offline

#8 2009-04-17 15:00:06

uastasi
Member
From: Salento - Italy
Registered: 2007-11-27
Posts: 247

Re: Minimal xorg.conf

I suspect that with a minimal xorg.conf my desktop crashes suddenly: it has happened two times in a few hours.
Gdm is restarted and I see some error messages on console as follows:

glibc detected /usr/bin/Xorg double free or corruption [..]
/dev/nvidia0 [..]
/lib/libc.so.6 [..]
/lib/ld-2.9.so

I'm looking for a complete error trace but I have no idea where it could be sad:(

Till the last battle, till the last bottle.
aur - twitter

Offline

#9 2009-04-18 12:31:09

EVRAMP
Member
From: Czech Republic
Registered: 2008-10-03
Posts: 173
Website

Re: Minimal xorg.conf

Try to look into /var/log/everything.log.

Offline

#10 2009-04-19 08:48:42

uastasi
Member
From: Salento - Italy
Registered: 2007-11-27
Posts: 247

Re: Minimal xorg.conf

EVRAMP wrote:

Try to look into /var/log/everything.log.

There's nothing related to that error. I must understand if it happens randomly or after some specific actions.

Till the last battle, till the last bottle.
aur - twitter

Offline

Pages: 1

Board footer

Powered by FluxBB