I bought a new sata-disc (diamondmaxtor 10 - 200gb) today and installed it without any problems, I also set up an ext3 partition but I have some problems with not beeing able to write and create files/folders on the disc.
My system is running arch 0.7.. the sata is put under /dev/discs/disc3 (linked to /dev/scsi/host0/bus0/target0/lun0/disc).. also there is a link at /dev/sda (partition is at /dev/sda1)
In fstab I have written this line:
/dev/sda1 /mnt/satan defaults,rw 0 1
I copied the line from my other ext3-partitions and added the option rw.. It works better now, but still get "read-only filesystem" sometimes - as normal user and root.
So... my question is.. what shall I have in fstab so the disc is mounted properly?
Is there noone that has a sata-drive here? ;o)
I have a sata drive. Here's my fstab:
# # /etc/fstab: static file system information # # <file system> <dir> <type> <options> <dump> <pass> none /proc proc defaults 0 0 none /dev/pts devpts defaults 0 0 none /dev/shm tmpfs defaults 0 0 tmpfs /tmp tmpfs defaults 0 0 sysfs /sys sysfs defaults 0 0 usbfs /proc/bus/usb usbfs defaults,mode=666 0 0 /dev/hdd /mnt/cd1 iso9660 ro,user,noauto,unhide 0 0 /dev/hdc /mnt/cd2 iso9660 ro,user,noauto,unhide 0 0 /dev/hdc /mnt/dvd udf ro,user,noauto,unhide 0 0 /dev/floppy/0 /mnt/fl vfat user,noauto 0 0 /dev/sda5 swap swap defaults 0 0 /dev/sda6 / reiserfs defaults 0 0 /dev/sda1 /mnt/win ntfs defaults,umask=0022 0 0 /dev/sda1 /mnt/captive-noname captive-ntfs defaults,noauto 0 0
And where were all the sportsmen who always pulled you though?
They're all resting down in Cornwall
writing up their memoirs for a paper-back edition
of the Boy Scout Manual.