You are not logged in.

#1 2009-05-10 09:15:41

abracadabra01
Member
Registered: 2009-05-06
Posts: 13

Freeze after video resolution change, chipset Intel915GM

Symptoms of the problem:

By 'xfce4 applet for changing the video resolution, after having set the new resolution
and clicked on "apply", the system freezes. The mouse pointer moves,  but mouse and
keyboard keys are blocked.

It requires a hardware reset.

Same behavior with the xrandr command and with or without input hot-plug enabled.

I attach the log of the X server obtained with a timed reboot, changed the
resolution, and saved the logs from live cd

Xorg.0.log

X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686 
Current Operating System: Linux MINIPC 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 29 14:25:30 UTC 2009 i686
Build Date: 15 April 2009  11:09:10AM
 
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun May 10 10:29:23 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "DontZap" "False"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x1a40
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0@0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xd0180000/524288, 0xc0000000/268435456, 0xd0200000/262144, I/O @ 0x0000da00/8
(--) PCI: (0@0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xd0100000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 2.7.99
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
    965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    Mobile Intel® GM45 Express Chipset,
    Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) intel(0): Chipset: "915GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xD0180000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(--) intel(0): Using UXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): I2C bus "SDVOB DDC Bus" initialized.
(II) intel(0): Output TMDS-1 has no monitor section
(II) intel(0): SDVOB: device VID/DID: 02:3C.06, clock range 25.0MHz - 200.0MHz
(II) intel(0): SDVOB: 1 input channel
(II) intel(0): SDVOB: TMDS0 output reported
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): Current clock rate multiplier: 1
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_D" initialized.
(II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_D:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_D:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_D" removed.
(II) intel(0): I2C bus "CRTDDC_E" initialized.
(II) intel(0): I2C device "CRTDDC_E:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_E:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_E:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_E:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_E" removed.
(II) intel(0): I2C device "SDVOB DDC Bus:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "SDVOB DDC Bus:ddc2" registered at address 0xA0.
(II) intel(0): Output VGA connected
(II) intel(0): Output TMDS-1 disconnected
(II) intel(0): Output TV connected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output VGA using initial mode 1024x768
(II) intel(0): Output TV using initial mode 1024x768
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (269, 201) mm
(**) intel(0): DPI set to (96, 97)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x80000a03 to 0x80000a07
(WW) intel(0): PIPEASTAT before: status: FIFO_UNDERRUN GMBUS_INT_STATUS VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(WW) intel(0): PIPEASTAT after: status: FIFO_UNDERRUN GMBUS_INT_STATUS VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 238848 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 955388 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II)         solid
(II)         copy
(II)         composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): Current clock rate multiplier: 1
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x000000003f800000 physical
)
(II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x000000003fe00000 physical
)
(II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x000000003fe01000 physical
)
(II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x000000003fe0b000 physical
)
(II) intel(0): 0x007bf000:            end of stolen memory
(II) intel(0): 0x007bf000-0x0f9f3fff: DRI memory manager (248020 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000:            start of memory manager
(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x0f9f4000:            end of memory manager
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe A
(II) intel(0):   Output TMDS-1 is connected to pipe none
(II) intel(0):   Output TV is connected to pipe B
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(WW) intel(0): Option "MonitorLayout" is not used
(WW) intel(0): Option "Clone" is not used
(WW) intel(0): Option "DevicePresence" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 269 x 201
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 2.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event5"
(II) Logitech USB Receiver: Found 9 mouse buttons
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as mouse
(II) Logitech USB Receiver: Configuring as keyboard
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) filter chain progression: 2.00
(**) Logitech USB Receiver: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Receiver: (accel) set acceleration profile 0
(II) config/hal: Adding input device em2880/em2870 remote control
(**) em2880/em2870 remote control: always reports core events
(**) em2880/em2870 remote control: Device: "/dev/input/event6"
(II) em2880/em2870 remote control: Found keys
(II) em2880/em2870 remote control: Configuring as keyboard
(II) XINPUT: Adding extended input device "em2880/em2870 remote control" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event4"
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_D" initialized.
(II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_D:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_D:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_D" removed.
(II) intel(0): I2C bus "CRTDDC_E" initialized.
(II) intel(0): I2C device "CRTDDC_E:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_E:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_E:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_E:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_E" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_D" initialized.
(II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_D:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_D:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_D" removed.
(II) intel(0): I2C bus "CRTDDC_E" initialized.
(II) intel(0): I2C device "CRTDDC_E:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_E:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_E:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_E:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_E" removed.
(II) intel(0): Allocate new frame buffer 800x600 stride 1024
(II) intel(0): New front buffer at 0x3c00000


xorg.conf

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/misc"
    FontPath     "/usr/share/fonts/100dpi:unscaled"
    FontPath     "/usr/share/fonts/75dpi:unscaled"
    FontPath     "/usr/share/fonts/TTF"
    FontPath     "/usr/share/fonts/Type1"
EndSection

Section "Module"
    Load  "glx"
    Load  "extmod"
    Load  "record"
    Load  "dri2"
    Load  "dri"
    Load  "dbe"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
    Option      "XkbLayout" "it"
    Option      "XkbVariant" ""
EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/input/mice"
    Option        "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
    Identifier   "Monitor0"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
    DisplaySize  269 201
EndSection

Section "Device"
     Identifier  "Card0"
    Driver        "intel"
    Option        "MonitorLayout"            "CRT+FLP,TV"
#    Option        "MonitorLayout"            "TV,CRT+FLP"
        Option        "Clone" "1"
        Option        "DevicePresence" "1"
    VendorName  "Intel Corporation"
    BoardName   "Mobile 915GM/GMS/910GML Express Graphics Controller"
    BusID       "PCI:0:2:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    SubSection "Display"
        Depth     1
        Modes     "1024x768" "800x600"
    EndSubSection
    SubSection "Display"
        Depth     4
        Modes     "1024x768" "800x600"
    EndSubSection
    SubSection "Display"
        Depth     8
        Modes     "1024x768" "800x600"
    EndSubSection
    SubSection "Display"
        Depth     15
        Modes     "1024x768" "800x600"
    EndSubSection
    SubSection "Display"
        Depth     16
        Modes     "1024x768" "800x600"
    EndSubSection
    SubSection "Display"
        Depth     24
        Modes     "1024x768" "800x600"
    EndSubSection
EndSection

Section "ServerFlags"
#    Option    "AutoAddDevices"    "False"
    Option  "DontZap"        "False"
EndSection

Offline

#2 2009-05-10 11:27:00

Bogart
Member
From: Madrid, Spain
Registered: 2005-06-22
Posts: 272

Re: Freeze after video resolution change, chipset Intel915GM

I think this must be the same as (or related to) this bug.

I'd recommend to use EXA acceleration until this is fixed.

Offline

#3 2009-05-10 14:24:43

abracadabra01
Member
Registered: 2009-05-06
Posts: 13

Re: Freeze after video resolution change, chipset Intel915GM

I use the driver xf86-video-intel-newest (2.7.99.1-3).
Seems that the line in xorg.conf Option "AccelMethod" "exa" has no effect.
Xorg.0.log shows:
(--) intel(0): Using UXA for acceleration

Any ideas?

Offline

#4 2009-05-10 14:32:16

Duologic
Member
From: Belgium
Registered: 2007-11-11
Posts: 249

Re: Freeze after video resolution change, chipset Intel915GM

can't test it because I don't have xfce, but here is my xorg.conf for that intel card, keyboard+touchpad is handled by policykit.

$ cat /etc/X11/xorg.conf
Section "ServerLayout"
        Identifier      "Xorg Configured"
        Screen          "LVDS"
EndSection

Section "Module"
        Load  "dri"
        Load  "glx"
EndSection

Section "Device"
        Identifier  "Intel GM965"
        Driver      "intel"
EndSection

Section "Screen"
        Identifier "LVDS"
        Device     "Intel GM965"
        DefaultColorDepth 24
        SubSection "Display"
                Depth   24
                Modes   "1280x800"
                Virtual 2048 2048
        EndSubSection
EndSection

Section "DRI"
        Mode 0666
EndSection

Works well with following packages.

local/intel-dri 7.4.1-1
    Mesa DRI drivers for Intel chipsets
local/xf86-video-intel 2.6.3-4 (xorg-video-drivers)
    X.org Intel i810/i830/i915/945G/G965+ video drivers

local/xorg-server 1.6.1-1 (xorg)
    X.Org X servers
local/xorg-server-utils 7.4-5 (xorg)
    X.Org utilities required by xorg-server
local/xorg-utils 7.4-4 (xorg)
    Collection of client utilities used to query the X server

Offline

#5 2009-05-10 14:41:10

Bogart
Member
From: Madrid, Spain
Registered: 2005-06-22
Posts: 272

Re: Freeze after video resolution change, chipset Intel915GM

abracadabra01 wrote:

I use the driver xf86-video-intel-newest (2.7.99.1-3).
Seems that the line in xorg.conf Option "AccelMethod" "exa" has no effect.
Xorg.0.log shows:
(--) intel(0): Using UXA for acceleration

Any ideas?

I think the latest driver drops support for EXA?

You probably need to use 2.7 or earlier.

Offline

Board footer

Powered by FluxBB