bluetooth doesn't work

rrodrigues · 2009-03-07 13:02:03

hi.. e can get my bluetooth device working.

i'm using kde3.5.10.
i already go to this file /etc/dbus-1/system.d/bluetooth.conf and change "root" to my user name.

lsmod | grep blue
bluetooth 54372 5 rfcomm,bnep,sco,l2cap,btusb
# /etc/rc.d/bluetooth restart
:: Stopping bluetooth subsystem: pand dund rfcomm hidd bluetoothd [DONE]
:: Starting bluetooth subsystem: bluetoothd [DONE]
# hcitool dev
Devices:

hcitool doesn't identify bluetooth device.. someone can help me?

bluey · 2009-03-07 18:32:33

Please post dmesg output.

rrodrigues · 2009-03-09 18:35:52

how can i do this?

rrodrigues · 2009-03-09 21:58:21

i supose that dmeg out is this

BIOS EBDA/lowmem at: 0009f800/0009f800
Linux version 2.6.28-ARCH (root@T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Sun Feb 22 11:03:50 UTC 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
 BIOS-e820: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
 BIOS-e820: 000000007fee3000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0x7fed0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 2 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000002000 (usable)
 modified: 0000000000002000 - 0000000000006000 (reserved)
 modified: 0000000000006000 - 0000000000007000 (usable)
 modified: 0000000000007000 - 0000000000010000 (reserved)
 modified: 0000000000010000 - 0000000000092800 (usable)
 modified: 000000000009f800 - 00000000000a0000 (reserved)
 modified: 00000000000dc000 - 0000000000100000 (reserved)
 modified: 0000000000100000 - 000000007fed0000 (usable)
 modified: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
 modified: 000000007fee3000 - 0000000080000000 (reserved)
 modified: 00000000fec00000 - 00000000fec10000 (reserved)
 modified: 00000000fed00000 - 00000000fed00400 (reserved)
 modified: 00000000fed14000 - 00000000fed1a000 (reserved)
 modified: 00000000fed1c000 - 00000000fed90000 (reserved)
 modified: 00000000fee00000 - 00000000fee01000 (reserved)
 modified: 00000000ff000000 - 0000000100000000 (reserved)
kernel direct mapping tables up to 377fe000 @ 10000-16000
RAMDISK: 7fe18000 - 7febf922
Allocated new RAMDISK: 0055f000 - 00606922
Move RAMDISK from 000000007fe18000 - 000000007febf921 to 0055f000 - 00606921
ACPI: RSDP 000F7B40, 0024 (r2 Compal)
ACPI: XSDT 7FED7DCE, 0094 (r1 Compal CRESTLNE  6040000  LTP        0)
ACPI: FACP 7FEDFBD2, 00F4 (r3 INTEL  CRESTLNE  6040000 ALAN        1)
ACPI: DSDT 7FED9B9F, 5FBF (r2 Compal CRESTLNE  6040000 INTL 20061109)
ACPI: FACS 7FEE2FC0, 0040
ACPI: APIC 7FEDFCC6, 0068 (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
ACPI: HPET 7FEDFD2E, 0038 (r1 Compal CRESTLNE  6040000 LOHR       5A)
ACPI: MCFG 7FEDFD66, 003C (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
ACPI: TCPA 7FEDFDA2, 0032 (r1 Intel  CRESTLNE  6040000 LOHR       5A)
ACPI: TMOR 7FEDFDD4, 0026 (r1 PTLTD            6040000 PTL         3)
ACPI: SLIC 7FEDFDFA, 0176 (r1 Compal CRESTLNE  6040000 TBD         1)
ACPI: APIC 7FEDFF70, 0068 (r1 PTLTD       APIC    6040000  LTP        0)
ACPI: BOOT 7FEDFFD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
ACPI: SSDT 7FED9550, 064F (r1 SataRe  SataPri     1000 INTL 20050624)
ACPI: SSDT 7FED8EBE, 0692 (r1 SataRe  SataSec     1000 INTL 20050624)
ACPI: SSDT 7FED83EE, 025F (r1  PmRef  Cpu0Tst     3000 INTL 20050624)
ACPI: SSDT 7FED8348, 00A6 (r1  PmRef  Cpu1Tst     3000 INTL 20050624)
ACPI: SSDT 7FED7E62, 04E6 (r1  PmRef    CpuPm     3000 INTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
ACPI: Local APIC address 0xfee00000
1158MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 00000000 - 377fe000
  bootmap 00012000 - 00018f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000100000 - 000055b520]    TEXT DATA BSS ==> [0000100000 - 000055b520]
  #4 [000055c000 - 000055f000]    INIT_PG_TABLE ==> [000055c000 - 000055f000]
  #5 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
  #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
  #7 [000055f000 - 0000606922]      NEW RAMDISK ==> [000055f000 - 0000606922]
  #8 [0000012000 - 0000019000]          BOOTMAP ==> [0000012000 - 0000019000]
found SMP MP-table at [c00f7bc0] 000f7bc0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x0007fed0
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
    0: 0x00000000 -> 0x00000002
    0: 0x00000006 -> 0x00000007
    0: 0x00000010 -> 0x00000092
    0: 0x00000100 -> 0x0007fed0
On node 0 totalpages: 523861
free_area_init_node: node 0, pgdat c0406600, node_mem_map c1000000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3941 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 2318 pages used for memmap
  HighMem zone: 294340 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 0000000000002000 - 0000000000006000
PM: Registered nosave memory: 0000000000007000 - 0000000000010000
PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
PERCPU: Allocating 36864 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519767
Kernel command line: root=/dev/disk/by-uuid/ff641817-af0c-4a35-b235-20c2c05f55a6 resume=/dev/sda5 ro vga=773
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2194.672 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Scanning for low memory corruption every 60 seconds
Memory: 2072032k/2095936k available (2228k kernel code, 22472k reserved, 1026k data, 332k init, 1186632k highmem)
virtual kernel memory layout:
    fixmap  : 0xffee8000 - 0xfffff000   (1116 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc0433000 - 0xc0486000   ( 332 kB)
      .data : 0xc032d1b9 - 0xc042db5c   (1026 kB)
      .text : 0xc0100000 - 0xc032d1b9   (2228 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.23 BogoMIPS (lpj=7315573)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080926
ACPI: Checking initramfs for custom DSDT
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0a
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4390.86 BogoMIPS (lpj=7314982)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (8781.09 BogoMIPS).
net_namespace: 768 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 2.10 entry at 0xfdde1, last bus=14
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f]
pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xf8504000-0xf85043ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8500000-0xf8503fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1d.1: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1d.2: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8504400-0xf85047ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0x18a0-0x18af]
pci 0000:00:1f.2: reg 10 io port: [0x18f8-0x18ff]
pci 0000:00:1f.2: reg 14 io port: [0x18cc-0x18cf]
pci 0000:00:1f.2: reg 18 io port: [0x18f0-0x18f7]
pci 0000:00:1f.2: reg 1c io port: [0x18c8-0x18cb]
pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ef]
pci 0000:00:1f.2: reg 24 io port: [0x18d0-0x18df]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xc6000000-0xc6ffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xc4000000-0xc5ffffff]
pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xc4000000-0xc6ffffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xbc000000-0xbfffffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xcc000000-0xcdffffff]
pci 0000:04:00.0: reg 10 64bit mmio: [0xf0000000-0xf000ffff]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xf0000000-0xf3ffffff]
pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfa000000-0xfbffffff]
pci 0000:00:1c.2: bridge io port: [0x5000-0x5fff]
pci 0000:00:1c.2: bridge 32bit mmio: [0xf4000000-0xf7ffffff]
pci 0000:00:1c.2: bridge 64bit mmio pref: [0xfc000000-0xfdffffff]
pci 0000:00:1c.3: bridge io port: [0x6000-0x6fff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xb4000000-0xb7ffffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xc8000000-0xc9ffffff]
pci 0000:0a:00.0: reg 10 32bit mmio: [0xf8100000-0xf81003ff]
pci 0000:0a:00.0: reg 18 io port: [0x7000-0x707f]
pci 0000:0a:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:00:1c.4: bridge io port: [0x7000-0x7fff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xf8100000-0xf81fffff]
pci 0000:0c:00.0: reg 10 64bit mmio: [0xf8000000-0xf8001fff]
pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.0: PME# disabled
pci 0000:00:1c.5: bridge 32bit mmio: [0xf8000000-0xf80fffff]
pci 0000:0e:06.0: reg 10 32bit mmio: [0xf8200000-0xf82007ff]
pci 0000:0e:06.0: supports D1 D2
pci 0000:0e:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0e:06.0: PME# disabled
pci 0000:0e:06.1: reg 10 32bit mmio: [0xf8200800-0xf82008ff]
pci 0000:0e:06.1: supports D1 D2
pci 0000:0e:06.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0e:06.1: PME# disabled
pci 0000:0e:06.2: reg 10 32bit mmio: [0xf8200c00-0xf8200cff]
pci 0000:0e:06.2: supports D1 D2
pci 0000:0e:06.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0e:06.2: PME# disabled
pci 0000:0e:06.3: reg 10 32bit mmio: [0xf8201000-0xf82010ff]
pci 0000:0e:06.3: supports D1 D2
pci 0000:0e:06.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0e:06.3: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xf8200000-0xf82fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:06: ioport range 0x680-0x69f has been reserved
system 00:06: ioport range 0x800-0x80f has been reserved
system 00:06: ioport range 0x1000-0x107f has been reserved
system 00:06: ioport range 0x1180-0x11bf has been reserved
system 00:06: ioport range 0x1640-0x164f has been reserved
system 00:06: ioport range 0xfe00-0xfe00 has been reserved
system 00:06: ioport range 0xff00-0xff7f has been reserved
pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0x2000-0x2fff
pci 0000:00:01.0:   MEM window: 0xc4000000-0xc6ffffff
pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: 0x3000-0x3fff
pci 0000:00:1c.0:   MEM window: 0xbc000000-0xbfffffff
pci 0000:00:1c.0:   PREFETCH window: 0x000000cc000000-0x000000cdffffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.1:   IO window: 0x4000-0x4fff
pci 0000:00:1c.1:   MEM window: 0xf0000000-0xf3ffffff
pci 0000:00:1c.1:   PREFETCH window: 0x000000fa000000-0x000000fbffffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.2:   IO window: 0x5000-0x5fff
pci 0000:00:1c.2:   MEM window: 0xf4000000-0xf7ffffff
pci 0000:00:1c.2:   PREFETCH window: 0x000000fc000000-0x000000fdffffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:08
pci 0000:00:1c.3:   IO window: 0x6000-0x6fff
pci 0000:00:1c.3:   MEM window: 0xb4000000-0xb7ffffff
pci 0000:00:1c.3:   PREFETCH window: 0x000000c8000000-0x000000c9ffffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0a
pci 0000:00:1c.4:   IO window: 0x7000-0x7fff
pci 0000:00:1c.4:   MEM window: 0xf8100000-0xf81fffff
pci 0000:00:1c.4:   PREFETCH window: 0x00000088000000-0x000000880fffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0c
pci 0000:00:1c.5:   IO window: disabled
pci 0000:00:1c.5:   MEM window: 0xf8000000-0xf80fffff
pci 0000:00:1c.5:   PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0e
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: 0xf8200000-0xf82fffff
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 01 index 0 io port: [0x2000-0x2fff]
bus: 01 index 1 mmio: [0xc4000000-0xc6ffffff]
bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 02 index 0 io port: [0x3000-0x3fff]
bus: 02 index 1 mmio: [0xbc000000-0xbfffffff]
bus: 02 index 2 mmio: [0xcc000000-0xcdffffff]
bus: 02 index 3 mmio: [0x0-0x0]
bus: 04 index 0 io port: [0x4000-0x4fff]
bus: 04 index 1 mmio: [0xf0000000-0xf3ffffff]
bus: 04 index 2 mmio: [0xfa000000-0xfbffffff]
bus: 04 index 3 mmio: [0x0-0x0]
bus: 06 index 0 io port: [0x5000-0x5fff]
bus: 06 index 1 mmio: [0xf4000000-0xf7ffffff]
bus: 06 index 2 mmio: [0xfc000000-0xfdffffff]
bus: 06 index 3 mmio: [0x0-0x0]
bus: 08 index 0 io port: [0x6000-0x6fff]
bus: 08 index 1 mmio: [0xb4000000-0xb7ffffff]
bus: 08 index 2 mmio: [0xc8000000-0xc9ffffff]
bus: 08 index 3 mmio: [0x0-0x0]
bus: 0a index 0 io port: [0x7000-0x7fff]
bus: 0a index 1 mmio: [0xf8100000-0xf81fffff]
bus: 0a index 2 mmio: [0x88000000-0x880fffff]
bus: 0a index 3 mmio: [0x0-0x0]
bus: 0c index 0 mmio: [0x0-0x0]
bus: 0c index 1 mmio: [0xf8000000-0xf80fffff]
bus: 0c index 2 mmio: [0x0-0x0]
bus: 0c index 3 mmio: [0x0-0x0]
bus: 0e index 0 mmio: [0x0-0x0]
bus: 0e index 1 mmio: [0xf8200000-0xf82fffff]
bus: 0e index 2 mmio: [0x0-0x0]
bus: 0e index 3 io port: [0x00-0xffff]
bus: 0e index 4 mmio: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 670k freed
Simple Boot Flag at 0x38 set to 0x1
apm: BIOS not found.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1732
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pcieport-driver 0000:00:01.0: irq 767 for MSI/MSI-X
pci_express 0000:00:01.0:pcie00: allocate port service
pci_express 0000:00:01.0:pcie02: allocate port service
pci_express 0000:00:01.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pcieport-driver 0000:00:1c.0: irq 766 for MSI/MSI-X
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pcieport-driver 0000:00:1c.1: irq 765 for MSI/MSI-X
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie02: allocate port service
pci_express 0000:00:1c.1:pcie03: allocate port service
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.2: found MSI capability
pcieport-driver 0000:00:1c.2: irq 764 for MSI/MSI-X
pci_express 0000:00:1c.2:pcie00: allocate port service
pci_express 0000:00:1c.2:pcie02: allocate port service
pci_express 0000:00:1c.2:pcie03: allocate port service
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.3: found MSI capability
pcieport-driver 0000:00:1c.3: irq 763 for MSI/MSI-X
pci_express 0000:00:1c.3:pcie00: allocate port service
pci_express 0000:00:1c.3:pcie02: allocate port service
pci_express 0000:00:1c.3:pcie03: allocate port service
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.4: found MSI capability
pcieport-driver 0000:00:1c.4: irq 762 for MSI/MSI-X
pci_express 0000:00:1c.4:pcie00: allocate port service
pci_express 0000:00:1c.4:pcie02: allocate port service
pci_express 0000:00:1c.4:pcie03: allocate port service
pcieport-driver 0000:00:1c.5: setting latency timer to 64
pcieport-driver 0000:00:1c.5: found MSI capability
pcieport-driver 0000:00:1c.5: irq 761 for MSI/MSI-X
pci_express 0000:00:1c.5:pcie00: allocate port service
pci_express 0000:00:1c.5:pcie02: allocate port service
pci_express 0000:00:1c.5:pcie03: allocate port service
vesafb: framebuffer at 0xc5000000, mapped to 0xf8080000, using 1536k, total 14336k
vesafb: mode is 1024x768x8, linelength=1024, pages=3
vesafb: protected mode interface info at c000:b240
vesafb: pmi: set display start = c00cb2a3, set palette = c00cb2fe
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 332k freed
input: AT Translated Set 2 keyboard as /class/input/input1
SCSI subsystem initialized
libata version 3.00 loaded.
pata_acpi 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pata_acpi 0000:00:1f.1: setting latency timer to 64
pata_acpi 0000:00:1f.1: PCI INT A disabled
pata_acpi 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pata_acpi 0000:00:1f.2: setting latency timer to 64
pata_acpi 0000:00:1f.2: PCI INT B disabled
ata_piix 0000:00:1f.1: version 2.12
ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
ata1.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, AS05, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-L632D AS05 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x18f8 ctl 0x18cc bmdma 0x18e0 irq 19
ata4: SATA max UDMA/133 cmd 0x18f0 ctl 0x18c8 bmdma 0x18e8 irq 19
ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.01: SATA link down (SStatus 0 SControl 300)
ata3.00: ATA-8: SAMSUNG HM250JI, HS100-08, max UDMA7
ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
ata4.00: SATA link down (SStatus 0 SControl 300)
ata4.01: SATA link down (SStatus 0 SControl 0)
scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HM250JI  HS10 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
sd 2:0:0:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
EXT4-fs: barriers enabled
kjournald2 starting.  Commit interval 5 seconds
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem with ordered data mode.
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
ACPI: SSDT 7FED8B7C, 027A (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
ACPI: SSDT 7FED864D, 04AA (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7FED8DF6, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
ACPI: SSDT 7FED8AF7, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
Marking TSC unstable due to TSC halts in idle
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usblp
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: AC Adapter [ACAD] (off-line)
ACPI: Battery Slot [BAT1] (battery present)
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [LID0]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
compal-laptop: Identified laptop model 'FT00/IFT00'.
compal-laptop: driver 0.2.6 successfully loaded.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8504000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8504400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
iTCO_vendor_support: vendor-support=0
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
usb 1-2: new high speed USB device using ehci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
tg3.c:v3.94 (August 14, 2008)
tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:04:00.0: setting latency timer to 64
Linux agpgart interface v0.103
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
nvidia: module license 'NVIDIA' taints kernel.
usb 4-1: new full speed USB device using uhci_hcd and address 2
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
ricoh-mmc: Ricoh MMC controller found at 0000:0e:06.2 [1180:0843] (rev 12)
ricoh-mmc: Controller is now disabled.
ACPI: WMI: Mapper loaded
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b018)
input: USB 2.0 Camera as /class/input/input5
input: PC Speaker as /class/input/input6
acpi device:05: registered as cooling_device2
input: Video Bus as /class/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
tpm_inf_pnp 00:08: Found TPM with ID IFX0102
tpm_inf_pnp 00:08: TPM found: config base 0x4e, data base 0x1670, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
usb 4-1: configuration #1 chosen from 1 choice
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
HDA Intel 0000:00:1b.0: setting latency timer to 64
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
    (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
Bluetooth: Core ver 2.13
nvidia 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module  180.29  Wed Feb  4 23:44:25 PST 2009
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.3
usbcore: registered new interface driver btusb
eth0: Tigon3 [partno(none) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1b:38:4c:60:ec
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
usb 4-2: new full speed USB device using uhci_hcd and address 3
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:0e:06.1: SDHCI controller found [1180:0822] (rev 22)
sdhci-pci 0000:0e:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
sdhci-pci 0000:0e:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0: SDHCI controller on PCI [0000:0e:06.1] using DMA
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
iwlagn: Copyright(c) 2003-2008 Intel Corporation
iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:0c:00.0: setting latency timer to 64
iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
ohci1394 0000:0e:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
psmouse serio1: ID: 10 00 64<6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[f8200000-f82007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
usb 4-2: configuration #1 chosen from 1 choice
iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels
iwlagn 0000:0c:00.0: PCI INT A disabled
phy0: Selected rate control algorithm 'iwl-agn-rs'
elantech.c: Elantech version query result 0x02, 0x00, 0x04.
elantech.c: assuming hardware version 1, firmware version 2.4
elantech.c: Synaptics capabilities query result 0x10, 0x02, 0x64.
input: ETPS/2 Elantech Touchpad as /class/input/input8
EXT4 FS on sda6, internal journal on sda6:8
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f78bf4002cf]
Clocksource tsc unstable (delta = -310108935 ns)
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.10)
Adding 2931820k swap on /dev/sda5.  Priority:-1 extents:1 across:2931820k
iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:0c:00.0: restoring config space at offset 0x1 (was 0x40100102, writing 0x40100106)
iwlagn 0000:0c:00.0: irq 760 for MSI/MSI-X
iwlagn 0000:0c:00.0: firmware: requesting iwlwifi-4965-2.ucode
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
tg3 0000:04:00.0: irq 759 for MSI/MSI-X
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
iwlagn 0000:0c:00.0: PCI INT A disabled
iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
iwlagn 0000:0c:00.0: irq 760 for MSI/MSI-X
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:1e:e5:8c:ad:da
wlan0: authenticated
wlan0: associate with AP 00:1e:e5:8c:ad:da
wlan0: RX AssocResp from 00:1e:e5:8c:ad:da (capab=0x411 status=0 aid=2)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: authenticate with AP 00:1e:e5:8c:ad:da
wlan0: authenticated
wlan0: associate with AP 00:1e:e5:8c:ad:da
wlan0: RX ReassocResp from 00:1e:e5:8c:ad:da (capab=0x411 status=0 aid=2)
wlan0: associated
wlan0: no IPv6 routers present

Last edited by rrodrigues (2009-05-12 21:41:48)

jb · 2009-03-14 02:46:22

If you're using kdemod3, this post may be relevant. Basically, it suggests using an older package of bluez.

Zibi1981 · 2009-05-09 21:22:11

So newer bluez packages don't work with KDEmod 3.5*???

blasse · 2009-05-10 09:55:23

It may not. Bluez4 is complete rewrite, it isn't backward-compatible with bluez3. As kde3 is being replaced by kde4, probably no one cares to write an applet that uses bluez4 api.

tomk · 2009-05-10 10:43:53

rrodrigues - please use code tags for log output, not quote tags.

rrodrigues · 2009-05-11 21:38:23

hi.. bluez work in my pc.. but kdemo3-kbluetooth doesn't work...

well.. now i can't connect my phone to my computer... i can't pairing pc and phone.. someone can help me?

when e do :

rfcomm connect 0

the computer try to connect but i don't know the pin..

in my hcid.conf i had defined the passkey as **** but i try to use this key when i'm trying to connect and gives me an error

Can't connect RFCOMM socket: Connection refused

Last edited by rrodrigues (2009-05-11 21:41:55)

Arch Linux

#1 2009-03-07 13:02:03

bluetooth doesn't work

#2 2009-03-07 18:32:33

Re: bluetooth doesn't work

#3 2009-03-09 18:35:52

Re: bluetooth doesn't work

#4 2009-03-09 21:58:21

Re: bluetooth doesn't work

#5 2009-03-14 02:46:22

Re: bluetooth doesn't work

#6 2009-05-09 21:22:11

Re: bluetooth doesn't work

#7 2009-05-10 09:55:23

Re: bluetooth doesn't work

#8 2009-05-10 10:43:53

Re: bluetooth doesn't work

#9 2009-05-11 21:38:23

Re: bluetooth doesn't work

Board footer