You are not logged in.
Hello everybody,
I am installing arch on my main desktop on which I have a nvidia 6800 LE. I used wiki and almost everything works fine. However I am used to have xcompmgr running with awesome wm. But my xorg configuration for my geforce 6800 LE should be not correct because it's not working at all.
I observed that both modules freetype and type1 that are highlighted in wiki are not found on my computer ...
You can find my xorg here :
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Thu Apr 16 19:36:29 PDT 2009
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
# Load "glx"
# Load "dri2"
# Load "record"
# Load "xtrap"
Load "dbe"
Load "extmod"
# Load "type1"
# Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
# Option "AutoAddDevices" "False"
# Option "AllowEmptyInput" "False"
Option "DontZap" "false"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30.0 - 130.0
VertRefresh 50.0 - 100.0
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV40.2 [GeForce 6800 LE]"
Option "RenderAccel" "true"
Option "NoLogo" "true"
Option "AGPFastWrite" "true"
Option "EnablePageFlip" "true"
Option "AllowGLXWithComposite" "true"
Option "XAANoOffscreenPixmaps"
Option "NoFlip" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Viewport 0 0
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
# Option "RENDER" "Enable"
EndSection
I was wondering if you had an idea of the cause of this non functioning. Moreover if someone has a good working xorg for geforce 6800 LE, you would be happy to know about it.
Thanks a lot for you help,
Sirsurthur
Last edited by Sirsurthur (2009-05-24 07:56:37)
Offline
Solved :
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Thu Apr 16 19:36:29 PDT 2009
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dbe"
Load "dri"
Load "extmod"
# Load "freetype"
Load "glx"
Load "int10"
# Load "type1"
Load "vbe"
# Load "glx"
# Load "dri2"
# Load "record"
# Load "xtrap"
# Load "dbe"
# Load "extmod"
# Load "type1"
# Load "freetype"
# Load "glx"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "AllowEmptyInput" "False"
Option "DontZap" "false"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30.0 - 130.0
VertRefresh 50.0 - 100.0
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV40.2 [GeForce 6800 LE]"
Option "RenderAccel" "true"
Option "NoLogo" "true"
Option "AGPFastWrite" "true"
Option "EnablePageFlip" "true"
Option "AllowGLXWithComposite" "true"
Option "XAANoOffscreenPixmaps"
Option "NoFlip" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Viewport 0 0
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
# Option "RENDER" "Enable"
EndSection
Offline