You are not logged in.

Pages: 1

#1 2009-05-16 08:56:15

Sirrah
Member
Registered: 2009-05-16
Posts: 22

[SOLVED] Problems installing Xorg

I'm pretty much a complete noob, not just to Arch but to Linux in general.  I've used Ubuntu for a few months, and I decided to give Arch a try as a summer project.  Well, I'm failing so far, because I can't figure out how to install Xorg.  I used hwd -xa and made sure I had chosen the right video card, but now when I try startx I get a screen that looks right (a large window on the left called login, two on the right called xterm, and a clock in the upper-right corner), but all the colors are completely off.  On top of that, this seems to freeze my computer, as both the keyboard and mouse are unresponsive (confirmed by way of waiting for the screen to go blank due to inactivity and then mashing the keyboard and moving the mouse to no avail).  I can't get out of this screen without pressing and holding the power button on my computer.

Any help would be appreciated.  Cheers!

Last edited by Sirrah (2009-05-25 09:16:06)

Offline

#2 2009-05-16 08:58:07

Allan
Pacman
From: Brisbane, AU
Registered: 2007-06-09
Posts: 11,384
Website

Re: [SOLVED] Problems installing Xorg

Using "X -configure" to generate your xorg.conf file.

PGP Key: F99FFE0FEAE999BD

Offline

#3 2009-05-16 09:44:46

Pyntux
Member
From: Serbia
Registered: 2008-12-21
Posts: 391

Re: [SOLVED] Problems installing Xorg

Or you can (if you have nvidia) to install nvidia driver and than do:

nvidia-xconfig

,after hwd -u (I always do hwd -u first), without X -configure because nvidia-xconfig will generate your xorg.conf...but, you must install DE (if you want smile ) and than start X or some login manager...When you install some DE, you can simply tipe:

kdm (or gdm...) and login manager will start...it shoud start...


P.S. if my english is bad, my teacher of english is gilty...or something like that... smile

Last edited by Pyntux (2009-05-16 09:47:29)

I do not speak English, but I understand...

Offline

#4 2009-05-16 14:05:39

mimir
Member
From: Norway
Registered: 2009-04-26
Posts: 11

Re: [SOLVED] Problems installing Xorg

i used to have problems with the new xorg. But here is how i do it after hwd don't do the job anymore (might not be the only way of course). It is better explained in the Beginners Guide if you are unsure how things are done, but a short explanation follows:

- Get HAL started, either manually or by adding it to the daemon in rc.conf and restarting
- Do the X -configure
- do whatever needed if you, lets say, have a Nvidia graphic card
- edit Xinitrc to start xterm and do StartX

This works for me atleast.

Welcome to Arch, hope you will enjoy the ride.

"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." - A. Einstein

Offline

#5 2009-05-16 19:02:02

Sirrah
Member
Registered: 2009-05-16
Posts: 22

Re: [SOLVED] Problems installing Xorg

Thanks for the help.  I think I've gotten past this first stumbling point, as I have the right driver and I've got an xorg.conf file with correct information on my keyboard and mouse.  Apparently I made a mistake with input hotplugging, disabling it instead of configuring it.

Now, however, when I run X -config /etc/X11/xorg.conf my monitor (a Memorex MLT1532) displays "Unsupported Mode," and I get an error after aborting with ctrl-alt-backspace.  After 13 lines of things formatted like "[10f] 320 x 200, 70Hz" is this:

error setting MTRR (base = 0xd8000000, size = 0x02000000, type = 1) Invalid argument (22)
error setting MTRR (base = 0xda000000, size = 0x05000000, type = 1) Invalid argument (22)

My monitor is a TV with a VGA input that's given me issues before with Windows XP and Ubuntu.  I don't have an extra monitor so I'd rather not have to buy one that offers better compatibility.

Offline

#6 2009-05-17 01:01:19

Sirrah
Member
Registered: 2009-05-16
Posts: 22

Re: [SOLVED] Problems installing Xorg

Another update: running x with startx or xinit still results in my monitor displaying "Unsupported Mode," now with this error message:

xterm:  fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0.0"
xinit:  connection to X server lost.

waiting for X server to shut down error setting MTRR (base = 0xd8000000, size = 0x02000000, type = 1) Invalid argument (22)
error setting MTRR (base = 0xda000000, size = 0x05000000, type = 1) Invalid argument (22)

If someone tells me how to, I'll post /var/log/Xorg.0.log.  It would take me a day to write it out here.  Is there a way to export it or post it from the Arch base system.  Thanks!


EDIT: Confirmed that the issue is with my monitor.  Borrowing a normal computer monitor yields the desired result.  What can I do to save myself a hundred bucks and make the one I have work?

Last edited by Sirrah (2009-05-17 03:10:48)

Offline

#7 2009-05-17 05:58:57

dmartins
Member
Registered: 2006-09-23
Posts: 360

Re: [SOLVED] Problems installing Xorg

You can post your Xorg.0.log and xorg.conf files using nopaste. Install it using pacman -S nopaste then post the file to rafb.net by running nopaste /var/log/Xorg.0.log

nopaste will give you a link to the posted file. Posts on rafb.net only last for 24 hours so you may want to use another computer to copy and paste the file contents from there to this forum, or maybe someone here would be nice enough to do that for you!

Offline

#8 2009-05-17 06:33:23

Sirrah
Member
Registered: 2009-05-16
Posts: 22

Re: [SOLVED] Problems installing Xorg

Thanks dmartins!  I'm using a second computer to post on the forum (I don't know how I'd be able to install Arch without a second computer anyway, at least not with Ubuntu as my only Linux experience).

Here's /var/log/Xorg.0.log when I attempt to run startx on my Memorex MLT1532 TV/monitor:

X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686 
Current Operating System: Linux arch 2.6.29-ARCH #1 SMP PREEMPT Sat May 9 12:47:43 UTC 2009 i686
Build Date: 15 April 2009  11:09:10AM
 
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 16 16:27:19 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "DontZap" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
(**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x1a40
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
 
(--) PCI:*(0@1:0:0) S3 Inc. VT8375 [ProSavage8 KM266/KL266] rev 0, Mem @ 0xe1000000/524288, 0xd8000000/134217728, BIOS @ 0x????????/65536
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "savage"
(II) Loading /usr/lib/xorg/modules/drivers//savage_drv.so
(II) Module savage: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 2.2.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
(II) SAVAGE: driver (version 2.2.1) for S3 Savage chipsets: Savage4,
    Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
    Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
    Twister PN133, Twister KN133, SuperSavage/MX 128, SuperSavage/MX 64,
    SuperSavage/MX 64C, SuperSavage/IX 128, SuperSavage/IX 128,
    SuperSavage/IX 64, SuperSavage/IX 64, SuperSavage/IXC 64,
    SuperSavage/IXC 64, ProSavage DDR, ProSavage DDR-K
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
(**) SAVAGE(0): Depth 24, (--) framebuffer bpp 32
(==) SAVAGE(0): RGB weight 888
(==) SAVAGE(0): Default visual is TrueColor
(II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) SAVAGE(0): Using XAA acceleration architecture
(==) SAVAGE(0): Using HW cursor
(==) SAVAGE(0): Using video BIOS to set modes
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.1.0
    ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 31680 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
(--) SAVAGE(0): Chip: id 8d04, "ProSavage DDR-K"
(--) SAVAGE(0): Engine: "ProSavageDDR"
(--) SAVAGE(0): AGP card detected
(==) SAVAGE(0): Using AGP DMA
(==) SAVAGE(0): Will try command and vertex DMA mode
(==) SAVAGE(0): Using AGP 1x mode
(==) SAVAGE(0): Using 16 MB AGP aperture
(==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) SAVAGE(0): probed videoram:  32768k
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(--) SAVAGE(0): No DDC signal
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) SAVAGE(0): I2C bus "I2C bus" initialized.
(II) SAVAGE(0): I2C device "I2C bus:E-EDID segment register" registered at address 0x60.
(II) SAVAGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0.
(--) SAVAGE(0): Detected current MCLK value of 14.318 MHz
(--) SAVAGE(0): 3040x2047 TFT LCD panel detected but not active
(--) SAVAGE(0): Found 13 modes at this depth:
    [10f] 320 x 200, 70Hz
    [134] 320 x 240, 72Hz
    [144] 400 x 300, 72Hz
    [154] 512 x 384, 70Hz
    [11e] 640 x 400, 70Hz
    [112] 640 x 480, 60Hz, 75Hz, 85Hz, 100Hz, 160Hz
    [115] 800 x 600, 60Hz, 75Hz, 85Hz
    [118] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz, 100Hz, 130Hz
    [17b] 1280 x 768, 60Hz
    [16a] 1280 x 960, 60Hz, 85Hz
    [11b] 1280 x 1024, 60Hz, 75Hz, 85Hz, 100Hz
    [13e] 1400 x 1050, 60Hz, 75Hz
    [124] 1600 x 1200, 60Hz
(II) SAVAGE(0): Monitor0: Using hsync range of 30.00-130.00 kHz
(II) SAVAGE(0): Monitor0: Using vrefresh range of 50.00-100.00 Hz
(II) SAVAGE(0): Clock range:  10.00 to 220.00 MHz
(--) SAVAGE(0): No suitable BIOS mode found for 640x350 85Hz.
(II) SAVAGE(0): Not using default mode "640x350" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 320x175 85Hz.
(II) SAVAGE(0): Not using default mode "320x175" (no mode of this name)
(--) SAVAGE(0): Chose mode 11e at 70Hz.
(--) SAVAGE(0): Chose mode 10f at 70Hz.
(--) SAVAGE(0): No suitable BIOS mode found for 720x400 85Hz.
(II) SAVAGE(0): Not using default mode "720x400" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 360x200 85Hz.
(II) SAVAGE(0): Not using default mode "360x200" (no mode of this name)
(--) SAVAGE(0): Chose mode 112 at 60Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 112 at 75Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 112 at 75Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 112 at 85Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 115 at 85Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 118 at 85Hz.
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(--) SAVAGE(0): Chose mode 118 at 60Hz.
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(--) SAVAGE(0): Chose mode 118 at 70Hz.
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(--) SAVAGE(0): Chose mode 118 at 75Hz.
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(--) SAVAGE(0): Chose mode 118 at 85Hz.
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(--) SAVAGE(0): No suitable BIOS mode found for 1152x864 75Hz.
(II) SAVAGE(0): Not using default mode "1152x864" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 576x432 75Hz.
(II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
(--) SAVAGE(0): Chose mode 16a at 60Hz.
(--) SAVAGE(0): Chose mode 112 at 60Hz.
(--) SAVAGE(0): Chose mode 16a at 85Hz.
(--) SAVAGE(0): Chose mode 112 at 85Hz.
(--) SAVAGE(0): Chose mode 11b at 60Hz.
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 60Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(--) SAVAGE(0): Chose mode 11b at 75Hz.
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 75Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(--) SAVAGE(0): Chose mode 11b at 85Hz.
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 85Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(--) SAVAGE(0): Chose mode 124 at 60Hz.
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(--) SAVAGE(0): Chose mode 124 at 60Hz.
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(--) SAVAGE(0): Chose mode 124 at 60Hz.
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(--) SAVAGE(0): Chose mode 124 at 60Hz.
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(II) SAVAGE(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): Chose mode 115 at 85Hz.
(--) SAVAGE(0): No suitable BIOS mode found for 1792x1344 60Hz.
(II) SAVAGE(0): Not using default mode "1792x1344" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 896x672 60Hz.
(II) SAVAGE(0): Not using default mode "896x672" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 896x672 75Hz.
(II) SAVAGE(0): Not using default mode "896x672" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1856x1392 60Hz.
(II) SAVAGE(0): Not using default mode "1856x1392" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 928x696 60Hz.
(II) SAVAGE(0): Not using default mode "928x696" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 928x696 75Hz.
(II) SAVAGE(0): Not using default mode "928x696" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 960x720 60Hz.
(II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 960x720 75Hz.
(II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 832x624 74Hz.
(II) SAVAGE(0): Not using default mode "832x624" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 416x312 74Hz.
(II) SAVAGE(0): Not using default mode "416x312" (no mode of this name)
(--) SAVAGE(0): Chose mode 13e at 60Hz.
(--) SAVAGE(0): No suitable BIOS mode found for 700x525 59Hz.
(II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
(--) SAVAGE(0): Chose mode 13e at 75Hz.
(--) SAVAGE(0): No suitable BIOS mode found for 700x525 74Hz.
(II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 960x720 85Hz.
(II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): Chose mode 118 at 60Hz.
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): Chose mode 118 at 75Hz.
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): Chose mode 118 at 85Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using driver mode "0x0" (illegal horizontal timings)
(--) SAVAGE(0): Chose mode 118 at 85Hz.
(--) SAVAGE(0): Chose mode 115 at 85Hz.
(--) SAVAGE(0): Chose mode 112 at 85Hz.
(II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) SAVAGE(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) SAVAGE(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) SAVAGE(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) SAVAGE(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) SAVAGE(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) SAVAGE(0): Not using default mode "1280x960" (width too large for virtual size)
(II) SAVAGE(0): Not using default mode "1280x960" (width too large for virtual size)
(--) SAVAGE(0): Chose mode 118 at 75Hz.
(--) SAVAGE(0): Chose mode 118 at 75Hz.
(--) SAVAGE(0): Chose mode 118 at 70Hz.
(--) SAVAGE(0): Chose mode 118 at 60Hz.
(--) SAVAGE(0): Chose mode 118 at 60Hz.
(--) SAVAGE(0): Chose mode 118 at 85Hz.
(--) SAVAGE(0): Chose mode 115 at 85Hz.
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(--) SAVAGE(0): Chose mode 112 at 85Hz.
(--) SAVAGE(0): Chose mode 112 at 75Hz.
(--) SAVAGE(0): Chose mode 112 at 75Hz.
(--) SAVAGE(0): Chose mode 112 at 60Hz.
(--) SAVAGE(0): Chose mode 112 at 60Hz.
(--) SAVAGE(0): Chose mode 11e at 70Hz.
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 10f at 70Hz.
(--) SAVAGE(0): Virtual size is 1024x768 (pitch 1024)
(**) SAVAGE(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) SAVAGE(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz)
(**) SAVAGE(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) SAVAGE(0): Modeline "800x600"x85.1   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz)
(**) SAVAGE(0): *Default mode "640x480": 74.2 MHz, 85.9 kHz, 85.1 Hz (D)
(II) SAVAGE(0): Modeline "640x480"x85.1   74.25  640 672 752 864  480 480 482 505 doublescan +hsync +vsync (85.9 kHz)
(**) SAVAGE(0):  Default mode "1024x768": 170.2 MHz, 120.2 kHz, 75.0 Hz (D)
(II) SAVAGE(0): Modeline "1024x768"x75.0  170.24  1024 1108 1220 1416  768 768 770 801 doublescan -hsync +vsync (120.2 kHz)
(**) SAVAGE(0):  Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) SAVAGE(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(**) SAVAGE(0):  Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) SAVAGE(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(**) SAVAGE(0):  Default mode "1024x768": 133.5 MHz, 95.3 kHz, 60.0 Hz (D)
(II) SAVAGE(0): Modeline "1024x768"x60.0  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz)
(**) SAVAGE(0):  Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) SAVAGE(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) SAVAGE(0):  Default mode "1024x768": 44.9 MHz, 35.5 kHz, 86.9 Hz (I)
(II) SAVAGE(0): Modeline "1024x768"x86.9   44.90  1024 1032 1208 1264  768 768 776 817 interlace +hsync +vsync (35.5 kHz)
(**) SAVAGE(0):  Default mode "800x600": 114.8 MHz, 106.2 kHz, 85.0 Hz (D)
(II) SAVAGE(0): Modeline "800x600"x85.0  114.75  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (106.2 kHz)
(**) SAVAGE(0):  Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) SAVAGE(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) SAVAGE(0):  Default mode "800x600": 101.2 MHz, 93.8 kHz, 75.0 Hz (D)
(II) SAVAGE(0): Modeline "800x600"x75.0  101.25  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (93.8 kHz)
(**) SAVAGE(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) SAVAGE(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(**) SAVAGE(0):  Default mode "800x600": 94.5 MHz, 87.5 kHz, 70.0 Hz (D)
(II) SAVAGE(0): Modeline "800x600"x70.0   94.50  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (87.5 kHz)
(**) SAVAGE(0):  Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
(II) SAVAGE(0): Modeline "800x600"x65.0   87.75  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (81.2 kHz)
(**) SAVAGE(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) SAVAGE(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) SAVAGE(0):  Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
(II) SAVAGE(0): Modeline "800x600"x60.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz)
(**) SAVAGE(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) SAVAGE(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) SAVAGE(0):  Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) SAVAGE(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)
(**) SAVAGE(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) SAVAGE(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) SAVAGE(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) SAVAGE(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(**) SAVAGE(0):  Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) SAVAGE(0): Modeline "640x480"x60.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz)
(**) SAVAGE(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) SAVAGE(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) SAVAGE(0):  Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) SAVAGE(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401 404 445 -hsync +vsync (37.9 kHz)
(**) SAVAGE(0):  Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(II) SAVAGE(0): Modeline "512x384"x85.0   47.25  512 536 584 688  384 384 386 404 doublescan +hsync +vsync (68.7 kHz)
(**) SAVAGE(0):  Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D)
(II) SAVAGE(0): Modeline "512x384"x75.0   39.38  512 520 568 656  384 384 386 400 doublescan +hsync +vsync (60.0 kHz)
(**) SAVAGE(0):  Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) SAVAGE(0): Modeline "512x384"x70.1   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync (56.5 kHz)
(**) SAVAGE(0):  Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) SAVAGE(0): Modeline "512x384"x60.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz)
(**) SAVAGE(0):  Default mode "512x384": 22.4 MHz, 35.5 kHz, 86.6 Hz (D)
(II) SAVAGE(0): Modeline "512x384"x86.6   22.45  512 516 604 632  384 384 388 409 interlace doublescan +hsync +vsync (35.5 kHz)
(**) SAVAGE(0):  Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) SAVAGE(0): Modeline "400x300"x85.3   28.15  400 416 448 524  300 300 302 315 doublescan +hsync +vsync (53.7 kHz)
(**) SAVAGE(0):  Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) SAVAGE(0): Modeline "400x300"x75.1   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync (46.9 kHz)
(**) SAVAGE(0):  Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) SAVAGE(0): Modeline "400x300"x72.2   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync (48.1 kHz)
(**) SAVAGE(0):  Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) SAVAGE(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
(**) SAVAGE(0):  Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) SAVAGE(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz)
(**) SAVAGE(0):  Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) SAVAGE(0): Modeline "320x240"x85.2   18.00  320 348 376 416  240 240 242 254 doublescan -hsync -vsync (43.3 kHz)
(**) SAVAGE(0):  Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) SAVAGE(0): Modeline "320x240"x75.0   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync (37.5 kHz)
(**) SAVAGE(0):  Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) SAVAGE(0): Modeline "320x240"x72.8   15.75  320 332 352 416  240 244 246 260 doublescan -hsync -vsync (37.9 kHz)
(**) SAVAGE(0):  Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) SAVAGE(0): Modeline "320x240"x60.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz)
(**) SAVAGE(0):  Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) SAVAGE(0): Modeline "320x200"x85.3   15.75  320 336 368 416  200 200 202 222 doublescan -hsync +vsync (37.9 kHz)
(==) SAVAGE(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.2.1
    ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 31680 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
(II) SAVAGE(0): 9348 kB of Videoram needed for 3D; 32768 kB of Videoram available
(II) SAVAGE(0): Sufficient Videoram available for 3D
(II) SAVAGE(0): [drm] bpp: 32 depth: 24
(II) SAVAGE(0): [drm] Sarea 2200+284: 2484
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) SAVAGE(0): [drm] Using the DRM lock SAREA also for drawables.
(II) SAVAGE(0): [drm] framebuffer handle = 0xd8000000
(II) SAVAGE(0): [drm] added 1 reserved context for kernel
(II) SAVAGE(0): X context handle = 0x1
(II) SAVAGE(0): [drm] installed DRM signal handler
(II) SAVAGE(0): [agp] Mode 0x1f000201 [AGP 0x1106/0x3116; Card 0x5333/0x8d04]
(II) SAVAGE(0): [agp] 16384 kB allocated with handle 0x00000001
(II) SAVAGE(0): [agp] command DMA handle = 0xd0000000
(II) SAVAGE(0): [agp] agpTextures handle = 0xd0100000
(II) SAVAGE(0): [drm] aperture handle = 0xda000000
(II) SAVAGE(0): [drm] Enabling ShadowStatus for DRI.
(II) SAVAGE(0): [drm] Status handle = 0x12da6000
(II) SAVAGE(0): [drm] Status page mapped at 0xb0888000
(II) SAVAGE(0): [dri] visual configs initialized
(**) SAVAGE(0): DRI is enabled
(--) SAVAGE(0): Chose mode 118 at 85Hz.
(II) SAVAGE(0): virtualX:1024,virtualY:768
(II) SAVAGE(0): bpp:32,tiledwidthBytes:4096,tiledBufferSize:3145728 
(II) SAVAGE(0): bpp:32,widthBytes:4096,BufferSize:3145728 
(II) SAVAGE(0): videoRambytes:0x02000000 
(II) SAVAGE(0): textureSize:0x014df000 
(II) SAVAGE(0): textureSize:0x014df000 
(II) SAVAGE(0): textureOffset:0x00b00000 
(II) SAVAGE(0): depthOffset:0x00800000,depthPitch:4096
(II) SAVAGE(0): backOffset:0x00500000,backPitch:4096
(II) SAVAGE(0): Reserved back buffer at offset 0x500000
(II) SAVAGE(0): Reserved depth buffer at offset 0x800000
(II) SAVAGE(0): Reserved 21372 kb for textures at offset 0xb00000
(II) SAVAGE(0): Using 511 lines for offscreen memory.
(II) SAVAGE(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Lines
    Image Writes
    Setting up tile and stipple cache:
        24 128x128 slots
(==) SAVAGE(0): Backing store disabled
(II) SAVAGE(0): DPMS enabled
(II) SAVAGE(0): [DRI] installation complete
(II) SAVAGE(0): [junkers]pSAVAGEDRIServer:
(II) SAVAGE(0): [junkers]    reserved_map_agpstart:0x00000000
(II) SAVAGE(0): [junkers]    reserved_map_idx:0x00000000
(II) SAVAGE(0): [junkers]    sarea_priv_offset:0x00000000
(II) SAVAGE(0): [junkers]    chipset:0x00000000
(II) SAVAGE(0): [junkers]    sgram:0x00000000
(II) SAVAGE(0): [junkers]    frontbufferSize:0x00300000
(II) SAVAGE(0): [junkers]    frontOffset:0x00000000
(II) SAVAGE(0): [junkers]    frontPitch:0x00001000
(II) SAVAGE(0): [junkers]    backbufferSize:0x00300000
(II) SAVAGE(0): [junkers]    backOffset:0x00500000
(II) SAVAGE(0): [junkers]    backPitch:0x00001000
(II) SAVAGE(0): [junkers]    depthbufferSize:0x00300000
(II) SAVAGE(0): [junkers]    depthOffset:0x00800000
(II) SAVAGE(0): [junkers]    depthPitch:0x00001000
(II) SAVAGE(0): [junkers]    textureOffset:0x00b00000
(II) SAVAGE(0): [junkers]    textureSize:0x014df000
(II) SAVAGE(0): [junkers]    textureSize:0x014df000
(II) SAVAGE(0): [junkers]    logTextureGranularity:0x00000000
(II) SAVAGE(0): [junkers]    agp:handle:0x00000001
(II) SAVAGE(0): [junkers]    agp:offset:0x01000000
(II) SAVAGE(0): [junkers]    agp:size:0x01000000
(II) SAVAGE(0): [junkers]    agp:map:0x00000000
(II) SAVAGE(0): [junkers]    registers:handle:0xe1000000
(II) SAVAGE(0): [junkers]    registers:offset:0x00000000
(II) SAVAGE(0): [junkers]    registers:size:0x00080000
(II) SAVAGE(0): [junkers]    registers:map:0x00000000
(II) SAVAGE(0): [junkers]    status:handle:0x12da6000
(II) SAVAGE(0): [junkers]    status:offset:0x00000000
(II) SAVAGE(0): [junkers]    status:size:0x00001000
(II) SAVAGE(0): [junkers]    status:map:0xb0888000
(II) SAVAGE(0): [junkers]    agpTextures:handle:0xd0100000
(II) SAVAGE(0): [junkers]    agpTextures:offset:0x00100000
(II) SAVAGE(0): [junkers]    agpTextures:size:0x00f00000
(II) SAVAGE(0): [junkers]    apgTextures:map:0x00000000
(II) SAVAGE(0): [junkers]    logAgpTextureGranularity:0x00000000
(II) SAVAGE(0): [junkers]    cmdDma:handle:0xd0000000
(II) SAVAGE(0): [junkers]    cmdDma:offset:0x00000000
(II) SAVAGE(0): [junkers]    cmdDma:size:0x00100000
(II) SAVAGE(0): [junkers]    cmdDma:map:0x00000000
(II) SAVAGE(0): [junkers]pSAVAGEDRI:
(II) SAVAGE(0): [junkers]    chipset:0x00000006
(II) SAVAGE(0): [junkers]    width:0x00000400
(II) SAVAGE(0): [junkers]    height:0x00000300
(II) SAVAGE(0): [junkers]    mem:0x02000000
(II) SAVAGE(0): [junkers]    cpp:4
(II) SAVAGE(0): [junkers]    zpp:4
(II) SAVAGE(0): [junkers]    agpMode:1
(II) SAVAGE(0): [junkers]    bufferSize:65536
(II) SAVAGE(0): [junkers]    frontbufferSize:0x00300000
(II) SAVAGE(0): [junkers]    frontOffset:0x00000000
(II) SAVAGE(0): [junkers]    backbufferSize:0x00300000
(II) SAVAGE(0): [junkers]    backOffset:0x00500000
(II) SAVAGE(0): [junkers]    depthbufferSize:0x00300000
(II) SAVAGE(0): [junkers]    depthOffset:0x00800000
(II) SAVAGE(0): [junkers]    textureOffset:0x00b00000
(II) SAVAGE(0): [junkers]    textureSize:0x01400000
(II) SAVAGE(0): [junkers]    logTextureGranularity:0x00000015
(II) SAVAGE(0): [junkers]    agpTextureHandle:0xd0100000
(II) SAVAGE(0): [junkers]    agpTextureSize:0x00f00000
(II) SAVAGE(0): [junkers]    logAgpTextureGranularity:0x00000014
(II) SAVAGE(0): [junkers]    apertureHandle:0xda000000
(II) SAVAGE(0): [junkers]    apertureSize:0x05000000
(II) SAVAGE(0): [junkers]    aperturePitch:0x00002000
(II) SAVAGE(0): [junkers]    statusHandle:0x12da6000
(II) SAVAGE(0): [junkers]    statusSize:0x00001000
(II) SAVAGE(0): [junkers]    sarea_priv_offset:0x00000898
(II) SAVAGE(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/savage_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 2.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device PS/2+USB Mouse
(**) PS/2+USB Mouse: always reports core events
(**) PS/2+USB Mouse: Device: "/dev/input/event4"
(II) PS/2+USB Mouse: Found 3 mouse buttons
(II) PS/2+USB Mouse: Found x and y relative axes
(II) PS/2+USB Mouse: Found scroll wheel(s)
(II) PS/2+USB Mouse: Configuring as mouse
(**) PS/2+USB Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2+USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2+USB Mouse" (type: MOUSE)
(**) PS/2+USB Mouse: (accel) keeping acceleration scheme 1
(**) PS/2+USB Mouse: (accel) filter chain progression: 2.00
(**) PS/2+USB Mouse: (accel) filter stage 0: 20.00 ms
(**) PS/2+USB Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) PS/2+USB Mouse: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) SAVAGE(0): [drm] removed 1 reserved context for kernel
(II) SAVAGE(0): [drm] unmapping 8192 bytes of SAREA 0xde81c000 at 0xb0889000
(II) SAVAGE(0): [drm] Closed DRM master.

Offline

#9 2009-05-17 17:09:04

dmartins
Member
Registered: 2006-09-23
Posts: 360

Re: [SOLVED] Problems installing Xorg

Could you post your xorg.conf as well please?

Offline

#10 2009-05-17 18:27:16

Sirrah
Member
Registered: 2009-05-16
Posts: 22

Re: [SOLVED] Problems installing Xorg

Sure.  *prepares to be embarrassed by stupid, obvious mistake*

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection
 
Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/misc"
    FontPath     "/usr/share/fonts/100dpi:unscaled"
    FontPath     "/usr/share/fonts/75dpi:unscaled"
    FontPath     "/usr/share/fonts/TTF"
    FontPath     "/usr/share/fonts/Type1"
EndSection
 
Section "Module"
    Load  "extmod"
    Load  "dri2"
    Load  "dbe"
    Load  "record"
    Load  "glx"
    Load  "dri"
EndSection
 
Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
EndSection
 
Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/input/mice"
    Option        "ZAxisMapping" "4 5 6 7"
EndSection
 
Section "Extensions"
    Option "Composite" "Enable"
EndSection
 
Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "AccelMethod"            # <str>
        #Option     "HWCursor"               # [<bool>]
        #Option     "SWCursor"               # [<bool>]
        #Option     "ShadowFB"               # [<bool>]
        #Option     "Rotate"                 # [<str>]
        #Option     "UseBIOS"                # [<bool>]
        #Option     "LCDClock"               # <freq>
        #Option     "ShadowStatus"           # [<bool>]
        #Option     "CrtOnly"                # [<bool>]
        #Option     "TvOn"                   # [<bool>]
        #Option     "PAL"                    # [<bool>]
        #Option     "ForceInit"              # [<bool>]
        #Option     "Overlay"                # [<str>]
        #Option     "TransparencyKey"        # [<str>]
        #Option     "ForceInit"              # [<bool>]
        #Option     "DisableXVMC"            # [<bool>]
        #Option     "DisableTile"            # [<bool>]
        #Option     "DisableCOB"             # [<bool>]
        #Option     "BCIforXv"               # [<bool>]
        #Option     "DVI"                    # [<bool>]
        #Option     "IgnoreEDID"             # [<bool>]
        #Option     "BusType"                # [<str>]
        #Option     "DmaType"                # [<str>]
        #Option     "DmaMode"                # [<str>]
        #Option     "AGPMode"                # <i>
        #Option     "AGPSize"                # <i>
        #Option     "DRI"                    # [<bool>]
    Identifier  "Card0"
    Driver      "savage"
    VendorName  "S3 Inc."
    BoardName   "VT8375 [ProSavage8 KM266/KL266]"
    BusID       "PCI:1:0:0"
EndSection
 
Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    DefaultDepth 24
    SubSection "Display"
        Viewport   0 0
        Depth     1
        Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
        Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
        Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
        Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
        Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
        Modes "1024x768" "800x600" "640x480"
    EndSubSection
EndSection
 
Section "Monitor"
    Identifier   "Monitor0"
    VendorName   "Memorex"
    ModelName    "MLT1532"
    HorizSync    30.0 - 130.0
    VertRefresh  50.0 - 100.0
EndSection
 
Section "ServerFlags"
    Option "DontZap" "false"
EndSection

Offline

#11 2009-05-18 06:56:56

dmartins
Member
Registered: 2006-09-23
Posts: 360

Re: [SOLVED] Problems installing Xorg

Your xorg.conf looks fine for most hardware configurations.. no silly mistakes that I can see smile

One line in your log file stands out:

(--) SAVAGE(0): No DDC signal

DDC is used to read the correct settings for your monitor. Yours may not have this feature.
It looks like your video card is trying to run the monitor at 1024x768 @ 85Hz

(--) SAVAGE(0): Chose mode 118 at 85Hz.
(II) SAVAGE(0): virtualX:1024,virtualY:768

This might be out of range of your monitor. If you can find a manual for it, it may list it's maximum refresh rate at 1024x768. My guess would be 60Hz. I'm not sure how to fix this. Maybe adding a modeline to your xorg.conf would help, but I have never really understood that whole process.

You mention that you did have X starting up before you configured hotplugging so you may want to try to disable hotplugging again, it could be the problem. The xterm windows and clock that you saw before are twm -- a very basic window manager that starts when you have nothing else configured. If you set up something else like Gnome or KDE it would start instead. There are guides on setting KDE and Gnome in the Arch Linux wiki.

Last edited by dmartins (2009-05-18 06:57:37)

Offline

#12 2009-05-25 09:16:46

Sirrah
Member
Registered: 2009-05-16
Posts: 22

Re: [SOLVED] Problems installing Xorg

Thanks for the help.  I decided to just buy a new monitor (I needed one anyway), which seems to be working fine except for a resolution issue l'll either deal with or ask about in another thread.  Marked as solved.

Offline

Pages: 1

Board footer

Powered by FluxBB