You are not logged in.
EDIT: No problems with 30-5 when it hit core.
Hi!
PM-hibernate doesn't work any more - Upgrades that day (pm-hibernate worked definitely the night before):
[2009-06-12 16:28] upgraded kernel26 (2.6.30-1 -> 2.6.30-2)
[2009-06-12 21:33] upgraded libev (3.53-1 -> 3.60-1)
[2009-06-12 21:33] upgraded wicd (1.6.0-1 -> 1.6.0-2)I don't really know what to look for. PM log says, it hibernated fine while I can't find a sign of it trying to wake up (just normal boot). But dmesg looks "scary" (eeek, md0: unknown partition table... and stuff!) so:
Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.0 20090526 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jun 12 10:46:46 CEST 2009
Command line: root=/dev/md2 resume=/dev/md0 ro md=0,/dev/sda2,/dev/sdb2 md=2,/dev/sda5,/dev/sdb5 vga=773
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000d7fa0000 (usable)
BIOS-e820: 00000000d7fa0000 - 00000000d7fae000 (ACPI data)
BIOS-e820: 00000000d7fae000 - 00000000d7fe0000 (ACPI NVS)
BIOS-e820: 00000000d7fe0000 - 00000000d8000000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
DMI 2.3 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0xd7fa0 max_arch_pfn = 0x100000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0C0000000 mask FF0000000 write-back
3 base 0D0000000 mask FF8000000 write-back
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000e4000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000d7fa0000 (usable)
modified: 00000000d7fa0000 - 00000000d7fae000 (ACPI data)
modified: 00000000d7fae000 - 00000000d7fe0000 (ACPI NVS)
modified: 00000000d7fe0000 - 00000000d8000000 (reserved)
modified: 00000000ffb80000 - 0000000100000000 (reserved)
init_memory_mapping: 0000000000000000-00000000d7fa0000
0000000000 - 00d7e00000 page 2M
00d7e00000 - 00d7fa0000 page 4k
kernel direct mapping tables up to d7fa0000 @ 10000-16000
RAMDISK: 37f46000 - 37fef50d
ACPI: RSDP 00000000000fad50 00014 (v00 ACPIAM)
ACPI: RSDT 00000000d7fa0000 00034 (v01 A M I OEMRSDT 09000611 MSFT 00000097)
ACPI: FACP 00000000d7fa0200 00081 (v01 A M I OEMFACP 09000611 MSFT 00000097)
ACPI: DSDT 00000000d7fa0400 08330 (v01 A0402 A0402000 00000000 INTL 02002026)
ACPI: FACS 00000000d7fae000 00040
ACPI: APIC 00000000d7fa0390 00070 (v01 A M I OEMAPIC 09000611 MSFT 00000097)
ACPI: OEMB 00000000d7fae040 00066 (v01 A M I AMI_OEM 09000611 MSFT 00000097)
ACPI: MCFG 00000000d7fa8730 0003C (v01 A M I OEMMCFG 09000611 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
(7 early reservations) ==> bootmem [0000000000 - 00d7fa0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 0000828110] TEXT DATA BSS ==> [0000200000 - 0000828110]
#3 [0037f46000 - 0037fef50d] RAMDISK ==> [0037f46000 - 0037fef50d]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0000829000 - 0000829280] BRK ==> [0000829000 - 0000829280]
#6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
found SMP MP-table at [ffff8800000ff780] ff780
[ffffe20000000000-ffffe20002ffffff] PMD -> [ffff880001200000-ffff8800041fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000d7fa0
On node 0 totalpages: 884527
DMA zone: 56 pages used for memmap
DMA zone: 1679 pages reserved
DMA zone: 2248 pages, LIFO batch:0
DMA32 zone: 12039 pages used for memmap
DMA32 zone: 868505 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at dc000000 (gap: d8000000:27b80000)
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 25 pages at ffff88000101c000, static data 72352 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 870753
Kernel command line: root=/dev/md2 resume=/dev/md0 ro md=0,/dev/sda2,/dev/sdb2 md=2,/dev/sda5,/dev/sdb5 vga=773
Initializing CPU#0
NR_IRQS:768
PID hash table entries: 4096 (order: 12, 32768 bytes)
Fast TSC calibration using PIT
Detected 1869.547 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3474804k/3538560k available (3395k kernel code, 452k absent, 62684k reserved, 1236k data, 460k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 3740.88 BogoMIPS (lpj=6231823)
Security Framework initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20090320
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
APIC calibration not consistent with PM-Timer: 116ms instead of 100ms
APIC delta adjusted to PM-Timer: 1669517 (1947649)
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3741.54 BogoMIPS (lpj=6232877)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (7481.43 BogoMIPS).
net_namespace: 1872 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: Using MMCONFIG at f0000000 - f3ffffff
ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - 2D, should be 20 [20090320]
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xdbef8000-0xdbefbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x9000-0x901f]
pci 0000:00:1d.1: reg 20 io port: [0x9400-0x941f]
pci 0000:00:1d.2: reg 20 io port: [0x9800-0x981f]
pci 0000:00:1d.3: reg 20 io port: [0xa000-0xa01f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xdbeffc00-0xdbefffff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:1f.2: reg 10 io port: [0xb800-0xb807]
pci 0000:00:1f.2: reg 14 io port: [0xb400-0xb403]
pci 0000:00:1f.2: reg 18 io port: [0xb000-0xb007]
pci 0000:00:1f.2: reg 1c io port: [0xa800-0xa803]
pci 0000:00:1f.2: reg 20 io port: [0xa400-0xa40f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:03:00.0: reg 10 32bit mmio: [0xdf000000-0xdfffffff]
pci 0000:03:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff]
pci 0000:03:00.0: reg 1c 64bit mmio: [0xdc000000-0xddffffff]
pci 0000:03:00.0: reg 24 io port: [0xe800-0xe87f]
pci 0000:03:00.0: reg 30 32bit mmio: [0xdefe0000-0xdeffffff]
pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
pci 0000:00:01.0: bridge 32bit mmio: [0xdc000000-0xdfffffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
pci 0000:01:02.0: reg 10 32bit mmio: [0xdbff0000-0xdbffffff]
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xdbf00000-0xdbffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
system 00:08: ioport range 0x290-0x297 has been reserved
system 00:09: ioport range 0x4d0-0x4d1 has been reserved
system 00:09: ioport range 0x800-0x87f has been reserved
system 00:09: ioport range 0x480-0x4bf has been reserved
system 00:09: ioport range 0x900-0x90f has been reserved
system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
system 00:09: iomem range 0xfff00000-0xffffffff has been reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0c: iomem range 0xf0000000-0xf3ffffff has been reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0xc0000-0xdffff has been reserved
system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
system 00:0d: iomem range 0x100000-0xd7ffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:03
pci 0000:00:01.0: IO window: 0xe000-0xefff
pci 0000:00:01.0: MEM window: 0xdc000000-0xdfffffff
pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: 0xd000-0xdfff
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1e.0: IO window: 0xc000-0xcfff
pci 0000:00:1e.0: MEM window: 0xdbf00000-0xdbffffff
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
pci_bus 0000:03: resource 1 mem: [0xdc000000-0xdfffffff]
pci_bus 0000:03: resource 2 pref mem [0xe0000000-0xefffffff]
pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:01: resource 1 mem: [0xdbf00000-0xdbffffff]
pci_bus 0000:01: resource 3 io: [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 677k freed
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1244886646.290:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 6789
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:03:00.0: Boot video device
pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
vesafb: framebuffer at 0xdd000000, mapped to 0xffffc20004100000, using 1536k, total 14336k
vesafb: mode is 1024x768x8, linelength=1024, pages=3
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 460k freed
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata_piix 0000:00:1f.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xa400 irq 23
ata4: SATA max UDMA/133 cmd 0xb000 ctl 0xa800 bmdma 0xa408 irq 23
ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H54L, 1.00, max UDMA/66
ata1.01: ATAPI: Optiarc DVD RW AD-7170A, 1.02, max UDMA/66
ata1.00: configured for UDMA/66
ata3.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
ata1.01: configured for UDMA/66
scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H54L 1.00 PQ: 0 ANSI: 5
scsi 0:0:1:0: CD-ROM Optiarc DVD RW AD-7170A 1.02 PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 2:0:0:0: [sda] Attached SCSI disk
ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
sd 3:0:0:0: [sdb] Attached SCSI disk
md: raid0 personality registered for level 0
md: bind<sda5>
md: bind<sdb5>
md2: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sdb5
raid0: comparing sdb5(19534848)<6> with sdb5(19534848)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sda5
raid0: comparing sda5(19534848)<6> with sdb5(19534848)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 39069696 sectors.
raid0 : conf->spacing is 39069696 sectors.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md2: unknown partition table
md2: unknown partition table
EXT4-fs: INFO: recovery required on readonly filesystem.
EXT4-fs: write access will be enabled during recovery.
EXT4-fs: barriers enabled
kjournald2 starting: pid 543, dev md2:8, commit interval 5 seconds
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: recovery complete.
EXT4-fs: mounted filesystem md2 with ordered data mode
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
udev: starting version 141
cfg80211: Calling CRDA to update world regulatory domain
ath5k 0000:01:02.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ath5k 0000:01:02.0: registered as 'phy0'
phy0: Selected rate control algorithm 'minstrel'
ath5k phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:03:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.14 Wed May 27 01:23:47 PDT 2009
ACPI Warning (tbutils-0246): Incorrect checksum in table [SSDT] - 0F, should be 16 [20090320]
ACPI: SSDT 00000000d7fa8770 002E3 (v01 AMI CPU1PM 00000001 INTL 20051117)
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI Warning (tbutils-0246): Incorrect checksum in table [SSDT] - 83, should be 04 [20090320]
ACPI: SSDT 00000000d7fa8a60 002DA (v01 AMI CPU2PM 00000001 INTL 20051117)
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU2] (supports 8 throttling states)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: PC Speaker as /devices/platform/pcspkr/input/input3
intel_rng: FWH not detected
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdbeffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23
iTCO_vendor_support: vendor-support=0
lp: driver loaded but no devices found
scsi 0:0:0:0: Attached scsi generic sg0 type 5
scsi 0:0:1:0: Attached scsi generic sg1 type 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
Floppy drive(s): fd0 is 1.44M
Driver 'sr' needs updating - please use bus_type methods
FDC 0 is a post-1991 82077
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
sr 0:0:1:0: Attached scsi CD-ROM sr1
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00009000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00009400
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009800
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000a000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
lp0: using parport0 (interrupt-driven).
usb 1-5: new high speed USB device using ehci_hcd and address 3
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
HDA Intel 0000:00:1b.0: setting latency timer to 64
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ppdev: user-space parallel port driver
usb 1-5: configuration #1 chosen from 1 choice
usb 3-1: new low speed USB device using uhci_hcd and address 2
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb 3-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input5
logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0
logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input6
logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1
md: md0 stopped.
md: bind<sdb2>
md: bind<sda2>
md0: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sda2
raid0: comparing sda2(4000000)<6> with sda2(4000000)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sdb2
raid0: comparing sdb2(4000000)<6> with sda2(4000000)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 8000000 sectors.
raid0 : conf->spacing is 8000000 sectors.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: md1 stopped.
md0: unknown partition table
md: bind<sdb3>
md: bind<sda3>
md1: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sda3
raid0: comparing sda3(933199616)<6> with sda3(933199616)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sdb3
raid0: comparing sdb3(933199616)<6> with sda3(933199616)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 1866399232 sectors.
raid0 : conf->spacing is 1866399232 sectors.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md1: unknown partition table
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
EXT4 FS on md2, internal journal on md2:8
JBD: barrier-based sync failed on md2:8 - disabling barriers
EXT4-fs: barriers enabled
kjournald2 starting: pid 2912, dev md1:8, commit interval 5 seconds
EXT4 FS on md1, internal journal on md1:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem md1 with ordered data mode
EXT4-fs: barriers enabled
kjournald2 starting: pid 2913, dev sda1:8, commit interval 5 seconds
EXT4 FS on sda1, internal journal on sda1:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda1 with ordered data mode
Adding 3999992k swap on /dev/md0. Priority:-1 extents:1 across:3999992k
scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
sd 4:0:0:0: Attached scsi generic sg4 type 0
scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
sd 4:0:0:1: Attached scsi generic sg5 type 0
scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
sd 4:0:0:2: Attached scsi generic sg6 type 0
sd 4:0:0:0: [sdc] Attached SCSI removable disk
sd 4:0:0:1: [sdd] Attached SCSI removable disk
sd 4:0:0:2: [sde] Attached SCSI removable disk
scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 4:0:0:3: Attached scsi generic sg7 type 0
sd 4:0:0:3: [sdf] Attached SCSI removable disk
usb-storage: device scan completeSome of the "scary ext4 stuff" and "scary raid stuff" that looks error'ish has been there before, while everything was still working.
Any hint is appreciated! thx.
Last edited by whoops (2009-06-23 16:01:22)
Offline
After update to 2.6.30-3, suspend to disk/pm-hibernate does not work any more at all. When executed, the system instantly freezes, not hd activity or anything else but the frozen "_" character on the otherwise empty screen.
the pm - log is not updated.
edit: seems to be back to the behaviour mentioned in the first post again, now - no idea why.
edit: Figured something out - both behaviours are still there,this is strange:
- If I call pm-hibernate from an xterminal, I get a seemingly clean hibernate, it "just" doesn't wake up again (=> normal boot)
- If I call pm-hibernate from tty (x not running), It just freezes instantly, no log or anything.
Last edited by whoops (2009-06-16 09:47:46)
Offline
OK, maybe that helps someone debug or something:
- I removed testing repo from pacman.conf
- I reinstalled "sudo pacman -S core/kernel26 nvidia"
- sudo pm-hibernate instantly after that, without reboot or anything...
- ... hibernate and resume did work fine, everything OK.
# pacman -Syu
says:
warning: ed: local (1.3-1) is newer than core (1.2-1)
warning: filesystem: local (2009.01-2) is newer than core (2009.01-1)
warning: flex: local (2.5.35-3) is newer than core (2.5.35-1)
warning: fusion-icon: local (20090605-1) is newer than community (20090414-1)
warning: kernel26-firmware: local (2.6.30-1) is newer than core (2.6.29-1)
warning: klibc: local (1.5.15-3) is newer than core (1.5.15-2)
warning: klibc-extras: local (2.5-4) is newer than core (2.5-3)
warning: klibc-kbd: local (1.15.20080312-10) is newer than core (1.15.20080312-9)
warning: klibc-module-init-tools: local (3.8-1) is newer than core (3.5-2)
warning: klibc-udev: local (141-3) is newer than core (141-2)
warning: libgcrypt: local (1.4.4-2) is newer than core (1.4.4-1)
warning: mkinitcpio: local (0.5.25-1) is newer than core (0.5.24-1)
warning: module-init-tools: local (3.8-1) is newer than core (3.5-1)
warning: sqlite3: local (3.6.14.2-1) is newer than core (3.6.14.1-1)
warning: tzdata: local (2009i-1) is newer than core (2009g-1)
warning: udev: local (141-3) is newer than core (141-1)
warning: xz-utils: local (4.999.8beta-4) is newer than core (4.999.8beta-3)which should mean, those are still the testing versions - right?
here's the packages changes / "fallbacks" that made suspend to disk work again:
[2009-06-16 13:25] upgraded kernel26 (2.6.30-4 -> 2.6.29.4-1)
[2009-06-16 13:25] upgraded nvidia-utils (185.18.14-1 -> 180.51-1)
[2009-06-16 13:25] upgraded nvidia (185.18.14-1 -> 180.51-1)I guess I'm going to stop updating, until the new kernel & nvidia goes core now and then I'll see. Unless someone has any questions or something...
another edit: did I mention I'm in arch64? (like - rhetorical - you know...)
Last edited by whoops (2009-06-16 11:46:18)
Offline