You are not logged in.
Ive used earlier a Kde system succesfuly, with ALSA as sound daemon. Now i've migrated to Gnome enviroment, so i thought also about migrating to PulseAudio. Ive installed it in the same way as on the Arch wiki, replacing /usr/bin/esd with /usr/bin/esdcompat (but ive also tried running pulse as daemon). Unfortunately i dont get any sound. pavumeter shows that pulse works, of course ive also unmuted all channels both in "alsamixer" and "alsamixer -c 0", everything in configuration looks good, but there isnt any sound in my speakers.
┌─[ dinth @ localhost ] - [ 11:38:11 ] - [ /var/log ]
└─[$]> sudo cat ./everything.log | grep pulse
Jul 16 19:01:24 localhost pulseaudio[4644]: alsa-sink.c: Increasing wakeup watermark to 30,00 ms
Jul 16 19:01:25 localhost pulseaudio[4644]: alsa-sink.c: Increasing wakeup watermark to 40,00 ms
Jul 16 19:01:25 localhost pulseaudio[4644]: alsa-sink.c: Increasing wakeup watermark to 50,00 ms
Jul 16 22:42:19 localhost pulseaudio[4644]: alsa-sink.c: ALSA została wybudzona, aby zapisać nowe dane do urządzenia, ale nie było nic do zapisania!
[translation: alsa was resumed for data write to device, but there was nothing to write]
Jul 16 22:42:19 localhost pulseaudio[4644]: alsa-sink.c: Prawdopodobnie jest to błąd w sterowniku ALSA "snd_hda_intel". Proszę zgłosić ten problem programistom ALSA.
[translation: propably this is error in alsa driver "snd_hda_intel", please send this problem to alsa developers]
Jul 16 22:42:19 localhost pulseaudio[4644]: alsa-sink.c: Wybudzono za pomocą ustawienia POLLOUT - ale jednoczesne wywołanie snd_pcm_avail() zwróciło zero lub inną wartość < min_avail.
[translation: resumed by POLLOUT - but snd_pcm_avail() returned 0 or other value < min_avail]
Jul 16 22:42:36 localhost pulseaudio[4644]: ratelimit.c: 3 events suppressed
Jul 16 22:42:41 localhost pulseaudio[4644]: ratelimit.c: 5 events suppressed
Jul 16 22:42:46 localhost pulseaudio[4644]: ratelimit.c: 1 events suppressed
Jul 16 22:43:09 localhost pulseaudio[4644]: module-rescue-streams.c: Failed to move source output 4 "Kontrola głośności PulseAudio" to alsa_input.usb_device_ac8_332d_noserial_if2_sound_card_0.
Jul 16 22:43:17 localhost pulseaudio[4644]: module-rescue-streams.c: Failed to move source output 2 "Kontrola głośności PulseAudio" to alsa_input.usb_device_ac8_332d_noserial_if2_sound_card_0.
Jul 16 22:43:18 localhost pulseaudio[4644]: alsa-source.c: Increasing minimal latency to 1,00 ms
Jul 16 22:43:18 localhost pulseaudio[4644]: module-rescue-streams.c: Failed to move source output 7 "Kontrola głośności PulseAudio" to alsa_input.usb_device_ac8_332d_noserial_if2_sound_card_0.
Jul 16 22:48:51 localhost pulseaudio[4644]: alsa-sink.c: Increasing wakeup watermark to 10,02 ms
Jul 16 22:52:15 localhost pulseaudio[4644]: alsa-source.c: Increasing minimal latency to 1,00 ms
Jul 16 22:52:33 localhost pulseaudio[4644]: module-rescue-streams.c: Failed to move source output 14 "Kontrola głośności PulseAudio" to alsa_input.usb_device_ac8_332d_noserial_if2_sound_card_0.
Jul 16 22:52:33 localhost pulseaudio[4644]: alsa-source.c: Increasing minimal latency to 1,00 ms
Jul 16 22:52:38 localhost pulseaudio[4644]: module-rescue-streams.c: Failed to move source output 19 "Kontrola głośności PulseAudio" to alsa_input.usb_device_ac8_332d_noserial_if2_sound_card_0.
Jul 16 22:52:38 localhost pulseaudio[4644]: alsa-source.c: Increasing minimal latency to 1,00 ms
Jul 16 22:52:40 localhost pulseaudio[4644]: module-rescue-streams.c: Failed to move source output 13 "Kontrola głośności PulseAudio" to alsa_input.pci_8086_284b_sound_card_0.
Jul 16 23:01:16 localhost pulseaudio[4059]: main.c: Running in system mode, but --disallow-exit not set!
Jul 16 23:01:16 localhost pulseaudio[4059]: main.c: Running in system mode, but --disallow-module-loading not set!
Jul 16 23:01:16 localhost pulseaudio[4059]: main.c: Running in system mode, forcibly disabling SHM mode!
Jul 16 23:01:16 localhost pulseaudio[4059]: main.c: Running in system mode, forcibly disabling exit idle time!
Jul 16 23:01:18 localhost pulseaudio[4258]: module-volume-restore.c: module-volume-restore is obsolete. It has been replaced by module-stream-restore. We will now load the latter but please make sure to remove module-volume-restore from your configuration.
Jul 16 23:01:18 localhost pulseaudio[4258]: module.c: Module "module-stream-restore" should be loaded once at most. Refusing to load.
Jul 16 23:01:18 localhost pulseaudio[4258]: main.c: Failed to acquire org.pulseaudio.Server: org.freedesktop.DBus.Error.AccessDenied: Connection ":1.23" is not allowed to own the service "org.pulseaudio.Server" due to security policies in the configuration file
Jul 16 23:01:18 localhost pulseaudio[4258]: alsa-sink.c: Increasing wakeup watermark to 30.00 ms
Jul 16 23:01:18 localhost pulseaudio[4258]: alsa-sink.c: Increasing wakeup watermark to 40.00 ms
Jul 16 23:01:18 localhost pulseaudio[4258]: alsa-sink.c: Increasing wakeup watermark to 50.00 ms
Jul 16 23:01:18 localhost pulseaudio[4258]: alsa-sink.c: Increasing wakeup watermark to 60.00 ms
Jul 16 23:01:18 localhost pulseaudio[4258]: alsa-sink.c: Increasing wakeup watermark to 70.00 ms
Jul 16 23:01:19 localhost pulseaudio[4258]: alsa-sink.c: Increasing wakeup watermark to 80.00 ms
Jul 16 23:01:50 localhost pulseaudio[7216]: alsa-sink.c: Unable to set switch: Operacja niedozwolona
Jul 17 10:04:42 localhost pulseaudio[7216]: alsa-sink.c: Increasing wakeup watermark to 20,00 ms
Jul 17 10:25:34 localhost pulseaudio[7216]: alsa-sink.c: Increasing wakeup watermark to 7,98 ms
Jul 17 11:10:45 localhost pulseaudio[7216]: alsa-sink.c: Increasing wakeup watermark to 15,96 ms
Jul 17 11:17:58 localhost pulseaudio[7216]: alsa-sink.c: Increasing wakeup watermark to 25,96 ms
Jul 17 11:31:08 localhost pulseaudio[7216]: alsa-sink.c: Increasing wakeup watermark to 35,96 ms
Jul 17 11:31:38 localhost pulseaudio[7216]: module-zeroconf-discover.c: avahi_client_new() failed: Demon nie jest uruchomiony
Jul 17 11:31:38 localhost pulseaudio[7216]: module-zeroconf-publish.c: avahi_client_new() failed: Demon nie jest uruchomionyLast edited by Dinth (2009-07-17 09:59:25)
Offline
Manualy running pulseaudio causes:
Last edited by Dinth (2009-07-17 13:25:04)
Offline
Ive reinstalled all my audio systems (esd, alsa, pulseaudio) with removing of config files and now i can get pulseaudio to work as daemon. Unfortunately, still it dont works right after reboot - everything looks OK, but no sound. I must manualy restart /etc/rc.d/pulseaudio to get sound work.
Of course, everything.log looks same after first run of pulseaudio daemon from rc.conf as after my manual restarting it.
Last edited by Dinth (2009-07-18 07:53:21)
Offline