You are not logged in.

Pages: 1

#1 2009-09-04 23:46:01

kozer
Member
Registered: 2008-04-14
Posts: 20

eee pc 900 and arch problem with xorg ( i think)

I have installed arch and i have this provlem.When gdm is going to start after 6 attempts,a message shows up and says that something bad happens and it will try again in 2 minutes
I have tryed every xorg server in this forum and wiki,I have add my user to hal,etc,but it keeps doing this thing.
I use the stock kernel by the way
Please help me i dont want to install eeebuntu again!!! tongue
Any ideas?

(sorry if i have any mistakes....my english are not  very good...)


PS sorry,please move me to the right section......

Last edited by kozer (2009-09-04 23:47:18)

Offline

#2 2009-09-05 06:10:11

djszapi
Member
From: Cambridge, United Kingdom
Registered: 2009-06-14
Posts: 1,439
Website

Re: eee pc 900 and arch problem with xorg ( i think)

Hello kozer!

"When gdm is going to start after 6 attempts,a message shows up and says that something bad happens and it will try again in 2 minutes" <- Can you show the exact error messages, your xorg.conf, and related informations from syslog/errorlog/xorglog ? Which kernel/driver/X do you use ? What kind of card do you have ?

http://lpapp.blogspot.com

Offline

#3 2009-09-06 11:33:43

kozer
Member
Registered: 2008-04-14
Posts: 20

Re: eee pc 900 and arch problem with xorg ( i think)

Here are my files

Xorg.conf

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/misc"
    FontPath     "/usr/share/fonts/100dpi:unscaled"
    FontPath     "/usr/share/fonts/75dpi:unscaled"
    FontPath     "/usr/share/fonts/TTF"
    FontPath     "/usr/share/fonts/Type1"
EndSection

Section "Module"
    Load  "dbe"
    Load  "record"
    Load  "dri"
    Load  "dri2"
    Load  "glx"
    Load  "extmod"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/input/mice"
    Option        "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
    Identifier   "Monitor0"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "SWcursor"               # [<bool>]
        #Option     "ColorKey"               # <i>
        #Option     "CacheLines"             # <i>
        #Option     "Dac6Bit"                # [<bool>]
        #Option     "DRI"                    # [<bool>]
        #Option     "NoDDC"                  # [<bool>]
        #Option     "ShowCache"              # [<bool>]
        #Option     "XvMCSurfaces"           # <i>
        #Option     "PageFlip"               # [<bool>]
    Identifier  "Card0"
    Driver      "intel"
    VendorName  "Intel Corporation"
    BoardName   "Mobile 915GM/GMS/910GML Express Graphics Controller"
    BusID       "PCI:0:2:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Xorg.0.log

X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH i686 
Current Operating System: Linux George_PC 2.6.30-ARCH #1 SMP PREEMPT Mon Aug 17 18:04:53 CEST 2009 i686
Build Date: 25 August 2009  09:20:48PM
 
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan  2 12:04:28 2002
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
(**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/Type1,
    built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x640
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0:0:2:0) 8086:2592:1043:82d9 Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 4, Mem @ 0xf7f00000/524288, 0xd0000000/268435456, 0xf7ec0000/262144, I/O @ 0x0000ec00/8
(--) PCI: (0:0:2:1) 8086:2792:1043:82d9 Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 4, Mem @ 0xf7f80000/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 2.3.2
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
    965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.1.0
    ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) intel(0): Chipset: "915GM"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xF7F00000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(II) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x600
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 2.4.0
    ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000203
(WW) intel(0): PIPEASTAT before: status:
(WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 238848 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 955388 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xf7f00000
(II) intel(0): [drm] ring buffer = 0xd0000000
(II) intel(0): [drm] mapped front buffer at 0xd0800000, handle = 0xd0800000
(II) intel(0): [drm] mapped back buffer at 0xd1800000, handle = 0xd1800000
(II) intel(0): [drm] mapped depth buffer at 0xd1c00000, handle = 0xd1c00000
(II) intel(0): [drm] mapped classic textures at 0xd2000000, handle = 0xd2000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 12582912 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00800000 (pgoffset 2048)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c00000 (pgoffset 3072)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01800000 (pgoffset 6144)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01c00000 (pgoffset 7168)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02000000 (pgoffset 8192)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000003f820000 physical
)
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000003fe20000 physical
)
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000003fe21000 physical
)
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000003fe33000 physical
)
(II) intel(0): 0x007bf000:            end of stolen memory
(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x00c00000-0x017fffff: exa offscreen (12288 kB)
(II) intel(0): 0x01800000-0x01bfffff: back buffer (4096 kB) X tiled
(II) intel(0): 0x01c00000-0x01ffffff: depth buffer (4096 kB) X tiled
(II) intel(0): 0x02000000-0x03ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 158
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 2.2.5
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device ETPS/2 Elantech Touchpad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.1.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event11"
(II) ETPS/2 Elantech Touchpad: x-axis range 8 - 1144
(II) ETPS/2 Elantech Touchpad: y-axis range 8 - 760
(II) ETPS/2 Elantech Touchpad: device does not report pressure, will use touch data.
(II) ETPS/2 Elantech Touchpad: finger width range 0 - 0
(II) ETPS/2 Elantech Touchpad: buttons: left right middle double triple
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) ETPS/2 Elantech Touchpad: touchpad found
(**) ETPS/2 Elantech Touchpad: always reports core events
(II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD)
(**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
(**) ETPS/2 Elantech Touchpad: (accel) filter chain progression: 2.00
(**) ETPS/2 Elantech Touchpad: (accel) filter stage 0: 20.00 ms
(**) ETPS/2 Elantech Touchpad: (accel) set acceleration profile 0
(--) ETPS/2 Elantech Touchpad: touchpad found
(II) config/hal: Adding input device Microsoft Basic Optical Mouse
(**) Microsoft Basic Optical Mouse: always reports core events
(**) Microsoft Basic Optical Mouse: Device: "/dev/input/event10"
(II) Microsoft Basic Optical Mouse: Found 3 mouse buttons
(II) Microsoft Basic Optical Mouse: Found x and y relative axes
(II) Microsoft Basic Optical Mouse: Found scroll wheel(s)
(II) Microsoft Basic Optical Mouse: Configuring as mouse
(**) Microsoft Basic Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Microsoft Basic Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Basic Optical Mouse" (type: MOUSE)
(**) Microsoft Basic Optical Mouse: (accel) keeping acceleration scheme 1
(**) Microsoft Basic Optical Mouse: (accel) filter chain progression: 2.00
(**) Microsoft Basic Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) Microsoft Basic Optical Mouse: (accel) set acceleration profile 0
(II) Microsoft Basic Optical Mouse: initialized for relative axes.
(II) config/hal: Adding input device Asus EeePC extra buttons
(**) Asus EeePC extra buttons: always reports core events
(**) Asus EeePC extra buttons: Device: "/dev/input/event7"
(II) Asus EeePC extra buttons: Found keys
(II) Asus EeePC extra buttons: Configuring as keyboard
(II) XINPUT: Adding extended input device "Asus EeePC extra buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event4"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event5"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event8"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) UnloadModule: "synaptics"
(II) Microsoft Basic Optical Mouse: Close
(II) UnloadModule: "evdev"
(II) Asus EeePC extra buttons: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Sleep Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) intel(0): xf86UnbindGARTMemory: unbind key 4
(II) intel(0): [drm] removed 1 reserved context for kernel
(II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xf8015000 at 0xb7fd5000
(II) intel(0): [drm] Closed DRM master.

syslog

Sep  2 22:56:07 George_PC syslog-ng[1063]: syslog-ng starting up; version='3.0.4'
Sep  2 23:25:53 George_PC syslog-ng[1063]: Termination requested via signal, terminating;
Sep  2 23:25:53 George_PC syslog-ng[1063]: syslog-ng shutting down; version='3.0.4'
Sep  3 05:17:21 George_PC syslog-ng[1062]: syslog-ng starting up; version='3.0.4'
Sep  3 05:23:13 George_PC syslog-ng[1062]: Termination requested via signal, terminating;
Sep  3 05:23:13 George_PC syslog-ng[1062]: syslog-ng shutting down; version='3.0.4'
Sep  3 05:23:42 George_PC syslog-ng[1054]: syslog-ng starting up; version='3.0.4'
Sep  3 05:24:53 George_PC syslog-ng[1054]: Termination requested via signal, terminating;
Sep  3 05:24:53 George_PC syslog-ng[1054]: syslog-ng shutting down; version='3.0.4'
Sep  3 05:25:22 George_PC syslog-ng[1056]: syslog-ng starting up; version='3.0.4'
Sep  3 05:30:26 George_PC syslog-ng[1056]: Termination requested via signal, terminating;
Sep  3 05:30:26 George_PC syslog-ng[1056]: syslog-ng shutting down; version='3.0.4'
Sep  3 05:30:55 George_PC syslog-ng[1062]: syslog-ng starting up; version='3.0.4'
Sep  3 05:53:17 George_PC syslog-ng[1062]: Termination requested via signal, terminating;
Sep  3 05:53:17 George_PC syslog-ng[1062]: syslog-ng shutting down; version='3.0.4'
Sep  3 05:56:39 George_PC syslog-ng[1074]: syslog-ng starting up; version='3.0.4'
Sep  3 06:02:14 George_PC syslog-ng[1074]: Termination requested via signal, terminating;
Sep  3 06:02:14 George_PC syslog-ng[1074]: syslog-ng shutting down; version='3.0.4'
Sep  3 06:02:44 George_PC syslog-ng[1061]: syslog-ng starting up; version='3.0.4'
Sep  3 06:15:34 George_PC syslog-ng[1061]: Termination requested via signal, terminating;
Sep  3 06:15:34 George_PC syslog-ng[1061]: syslog-ng shutting down; version='3.0.4'
Sep  3 06:16:03 George_PC syslog-ng[1059]: syslog-ng starting up; version='3.0.4'
Sep  3 06:25:41 George_PC syslog-ng[1059]: Termination requested via signal, terminating;
Sep  3 06:25:41 George_PC syslog-ng[1059]: syslog-ng shutting down; version='3.0.4'
Sep  3 06:26:10 George_PC syslog-ng[1075]: syslog-ng starting up; version='3.0.4'
Sep  3 06:55:17 George_PC syslog-ng[1075]: Termination requested via signal, terminating;
Sep  3 06:55:17 George_PC syslog-ng[1075]: syslog-ng shutting down; version='3.0.4'
Sep  3 06:55:46 George_PC syslog-ng[1083]: syslog-ng starting up; version='3.0.4'
Sep  3 07:08:14 George_PC syslog-ng[1084]: syslog-ng starting up; version='3.0.4'
Sep  3 07:16:58 George_PC syslog-ng[1084]: Termination requested via signal, terminating;
Sep  3 07:16:58 George_PC syslog-ng[1084]: syslog-ng shutting down; version='3.0.4'
Sep  3 07:17:06 George_PC syslog-ng[2146]: syslog-ng starting up; version='3.0.4'
Sep  3 07:22:33 George_PC syslog-ng[2146]: Termination requested via signal, terminating;
Sep  3 07:22:33 George_PC syslog-ng[2146]: syslog-ng shutting down; version='3.0.4'
Sep  3 09:20:24 George_PC syslog-ng[1084]: syslog-ng starting up; version='3.0.4'
Sep  3 14:35:50 George_PC syslog-ng[1096]: syslog-ng starting up; version='3.0.4'
Sep  3 14:41:06 George_PC syslog-ng[1096]: Termination requested via signal, terminating;
Sep  3 14:41:06 George_PC syslog-ng[1096]: syslog-ng shutting down; version='3.0.4'
Sep  3 14:41:39 George_PC syslog-ng[1084]: syslog-ng starting up; version='3.0.4'
Sep  3 15:52:03 George_PC syslog-ng[1084]: Termination requested via signal, terminating;
Sep  3 15:52:03 George_PC syslog-ng[1084]: syslog-ng shutting down; version='3.0.4'
Sep  3 15:52:35 George_PC syslog-ng[1078]: syslog-ng starting up; version='3.0.4'
Sep  3 16:28:27 George_PC syslog-ng[1078]: Termination requested via signal, terminating;
Sep  3 16:28:27 George_PC syslog-ng[1078]: syslog-ng shutting down; version='3.0.4'
Sep  3 16:28:57 George_PC syslog-ng[1087]: syslog-ng starting up; version='3.0.4'
Sep  3 16:30:23 George_PC syslog-ng[1087]: Termination requested via signal, terminating;
Sep  3 16:30:23 George_PC syslog-ng[1087]: syslog-ng shutting down; version='3.0.4'
Sep  3 16:30:59 George_PC syslog-ng[1081]: syslog-ng starting up; version='3.0.4'
Sep  3 16:41:54 George_PC syslog-ng[1081]: Termination requested via signal, terminating;
Sep  3 16:41:54 George_PC syslog-ng[1081]: syslog-ng shutting down; version='3.0.4'
Sep  3 16:42:22 George_PC syslog-ng[1080]: syslog-ng starting up; version='3.0.4'
Jan  1 00:01:04 George_PC syslog-ng[1074]: syslog-ng starting up; version='3.0.4'
Jan  1 00:09:58 George_PC syslog-ng[1074]: Termination requested via signal, terminating;
Jan  1 00:09:58 George_PC syslog-ng[1074]: syslog-ng shutting down; version='3.0.4'
Jan  1 00:10:28 George_PC syslog-ng[1084]: syslog-ng starting up; version='3.0.4'
Jan  1 00:40:40 George_PC syslog-ng[1084]: Termination requested via signal, terminating;
Jan  1 00:40:40 George_PC syslog-ng[1084]: syslog-ng shutting down; version='3.0.4'
Jan  1 00:41:12 George_PC syslog-ng[1065]: syslog-ng starting up; version='3.0.4'
Jan  1 01:21:17 George_PC syslog-ng[1065]: Termination requested via signal, terminating;
Jan  1 01:21:17 George_PC syslog-ng[1065]: syslog-ng shutting down; version='3.0.4'
Jan  1 01:21:49 George_PC syslog-ng[1068]: syslog-ng starting up; version='3.0.4'
Jan  1 01:35:02 George_PC syslog-ng[1088]: syslog-ng starting up; version='3.0.4'
Jan  1 01:41:24 George_PC syslog-ng[1091]: syslog-ng starting up; version='3.0.4'
Jan  1 05:55:28 George_PC syslog-ng[1082]: syslog-ng starting up; version='3.0.4'
Jan  1 06:16:09 George_PC syslog-ng[1082]: Termination requested via signal, terminating;
Jan  1 06:16:09 George_PC syslog-ng[1082]: syslog-ng shutting down; version='3.0.4'
Jan  1 06:16:41 George_PC syslog-ng[1062]: syslog-ng starting up; version='3.0.4'
Jan  1 06:29:11 George_PC syslog-ng[1062]: Termination requested via signal, terminating;
Jan  1 06:29:11 George_PC syslog-ng[1062]: syslog-ng shutting down; version='3.0.4'
Jan  1 06:29:43 George_PC syslog-ng[1068]: syslog-ng starting up; version='3.0.4'
Jan  1 06:35:17 George_PC syslog-ng[1068]: Termination requested via signal, terminating;
Jan  1 06:35:17 George_PC syslog-ng[1068]: syslog-ng shutting down; version='3.0.4'
Jan  1 06:35:46 George_PC syslog-ng[1064]: syslog-ng starting up; version='3.0.4'
Jan  1 06:46:19 George_PC syslog-ng[1064]: Termination requested via signal, terminating;
Jan  1 06:46:19 George_PC syslog-ng[1064]: syslog-ng shutting down; version='3.0.4'
Jan  1 06:46:50 George_PC syslog-ng[1067]: syslog-ng starting up; version='3.0.4'
Jan  1 06:58:36 George_PC syslog-ng[1071]: syslog-ng starting up; version='3.0.4'
Jan  1 07:00:43 George_PC syslog-ng[1071]: Termination requested via signal, terminating;
Jan  1 07:00:43 George_PC syslog-ng[1071]: syslog-ng shutting down; version='3.0.4'
Jan  1 07:01:14 George_PC syslog-ng[1068]: syslog-ng starting up; version='3.0.4'
Jan  1 07:05:57 George_PC syslog-ng[1068]: Termination requested via signal, terminating;
Jan  1 07:05:57 George_PC syslog-ng[1068]: syslog-ng shutting down; version='3.0.4'
Jan  1 07:06:27 George_PC syslog-ng[1066]: syslog-ng starting up; version='3.0.4'
Jan  1 07:09:00 George_PC syslog-ng[1066]: Termination requested via signal, terminating;
Jan  1 07:09:00 George_PC syslog-ng[1066]: syslog-ng shutting down; version='3.0.4'
Jan  1 07:09:33 George_PC syslog-ng[1063]: syslog-ng starting up; version='3.0.4'
Jan  1 07:25:23 George_PC syslog-ng[1074]: syslog-ng starting up; version='3.0.4'
Jan  1 07:35:16 George_PC syslog-ng[1074]: Termination requested via signal, terminating;
Jan  1 07:35:16 George_PC syslog-ng[1074]: syslog-ng shutting down; version='3.0.4'
Jan  1 07:35:46 George_PC syslog-ng[1075]: syslog-ng starting up; version='3.0.4'
Jan  1 07:50:44 George_PC syslog-ng[1075]: Termination requested via signal, terminating;
Jan  1 07:50:44 George_PC syslog-ng[1075]: syslog-ng shutting down; version='3.0.4'
Jan  1 07:51:14 George_PC syslog-ng[1062]: syslog-ng starting up; version='3.0.4'
Jan  1 08:03:39 George_PC syslog-ng[1074]: syslog-ng starting up; version='3.0.4'
Jan  1 08:04:34 George_PC syslog-ng[1074]: Termination requested via signal, terminating;
Jan  1 08:04:34 George_PC syslog-ng[1074]: syslog-ng shutting down; version='3.0.4'
Jan  1 08:05:04 George_PC syslog-ng[1064]: syslog-ng starting up; version='3.0.4'
Jan  1 08:14:35 George_PC syslog-ng[1064]: Termination requested via signal, terminating;
Jan  1 08:14:35 George_PC syslog-ng[1064]: syslog-ng shutting down; version='3.0.4'
Jan  1 08:15:06 George_PC syslog-ng[1064]: syslog-ng starting up; version='3.0.4'
Jan  1 08:17:09 George_PC syslog-ng[1064]: Termination requested via signal, terminating;
Jan  1 08:17:09 George_PC syslog-ng[1064]: syslog-ng shutting down; version='3.0.4'
Jan  1 11:10:21 George_PC syslog-ng[1063]: syslog-ng starting up; version='3.0.4'
Jan  1 11:12:14 George_PC syslog-ng[1063]: Termination requested via signal, terminating;
Jan  1 11:12:14 George_PC syslog-ng[1063]: syslog-ng shutting down; version='3.0.4'
Jan  1 11:28:46 George_PC syslog-ng[1074]: syslog-ng starting up; version='3.0.4'
Jan  1 11:33:55 George_PC syslog-ng[1074]: Termination requested via signal, terminating;
Jan  1 11:33:55 George_PC syslog-ng[1074]: syslog-ng shutting down; version='3.0.4'
Jan  1 11:34:26 George_PC syslog-ng[1071]: syslog-ng starting up; version='3.0.4'
Jan  1 11:55:01 George_PC syslog-ng[1071]: Termination requested via signal, terminating;
Jan  1 11:55:01 George_PC syslog-ng[1071]: syslog-ng shutting down; version='3.0.4'
Jan  1 11:55:31 George_PC syslog-ng[1065]: syslog-ng starting up; version='3.0.4'
Jan  1 12:17:11 George_PC syslog-ng[1065]: Termination requested via signal, terminating;
Jan  1 12:17:11 George_PC syslog-ng[1065]: syslog-ng shutting down; version='3.0.4'
Jan  1 00:01:28 George_PC syslog-ng[1057]: syslog-ng starting up; version='3.0.4'
Jan  1 00:10:11 George_PC syslog-ng[1057]: Termination requested via signal, terminating;
Jan  1 00:10:11 George_PC syslog-ng[1057]: syslog-ng shutting down; version='3.0.4'
Jan  1 00:16:27 George_PC syslog-ng[1056]: syslog-ng starting up; version='3.0.4'
Jan  1 11:58:07 George_PC syslog-ng[1070]: syslog-ng starting up; version='3.0.4'
Jan  1 12:05:14 George_PC syslog-ng[1070]: Termination requested via signal, terminating;
Jan  1 12:05:14 George_PC syslog-ng[1070]: syslog-ng shutting down; version='3.0.4'
Jan  1 12:05:52 George_PC syslog-ng[1076]: syslog-ng starting up; version='3.0.4'
Jan  1 12:15:30 George_PC syslog-ng[1076]: Termination requested via signal, terminating;
Jan  1 12:15:30 George_PC syslog-ng[1076]: syslog-ng shutting down; version='3.0.4'
Jan  2 11:37:00 George_PC syslog-ng[1069]: syslog-ng starting up; version='3.0.4'
Jan  2 11:50:32 George_PC syslog-ng[1069]: Termination requested via signal, terminating;
Jan  2 11:50:32 George_PC syslog-ng[1069]: syslog-ng shutting down; version='3.0.4'
Jan  2 11:51:05 George_PC syslog-ng[1065]: syslog-ng starting up; version='3.0.4'
Jan  2 11:52:43 George_PC syslog-ng[1065]: Termination requested via signal, terminating;
Jan  2 11:52:43 George_PC syslog-ng[1065]: syslog-ng shutting down; version='3.0.4'
Jan  2 11:53:14 George_PC syslog-ng[1075]: syslog-ng starting up; version='3.0.4'
Jan  2 12:02:34 George_PC syslog-ng[1075]: Termination requested via signal, terminating;
Jan  2 12:02:34 George_PC syslog-ng[1075]: syslog-ng shutting down; version='3.0.4'
Jan  2 12:03:06 George_PC syslog-ng[1063]: syslog-ng starting up; version='3.0.4'

Offline

#4 2009-09-06 11:39:46

kozer
Member
Registered: 2008-04-14
Posts: 20

Re: eee pc 900 and arch problem with xorg ( i think)

errorlog

Sep  2 22:56:09 George_PC kernel: sd 2:0:0:0: [sdb] Assuming drive cache: write through
Sep  2 22:56:09 George_PC kernel: sd 2:0:0:0: [sdb] Assuming drive cache: write through
Sep  3 05:17:21 George_PC dhcpcd: eth0: add_route: No such process
Sep  3 05:23:42 George_PC dhcpcd: eth0: add_route: No such process
Sep  3 05:23:51 George_PC login[1117]: pam_tally(login:auth): pam_get_uid; no such user
Sep  3 05:24:34 George_PC dhcpcd: eth0: add_route: No such process
Sep  3 05:25:22 George_PC dhcpcd: eth0: add_route: No such process
Sep  3 05:27:25 George_PC dhcpcd: eth0: add_route: No such process
Sep  3 05:56:39 George_PC dhcpcd: eth0: add_route: No such process
Sep  3 05:57:57 George_PC dhcpcd: dhcpcd: interface not found or invalid
Sep  3 05:57:57 George_PC dhcpcd: eth0: add_route: No such process
Sep  3 05:58:37 George_PC dhcpcd: eth0: add_route: No such process
Sep  3 05:59:14 George_PC dhcpcd: eth0: add_route: No such process
Sep  3 05:59:24 George_PC dhcpcd: eth0: add_route: No such process
Sep  3 06:01:14 George_PC dhcpcd: eth0: add_route: No such process
Sep  3 06:01:25 George_PC dhcpcd: eth0: add_route: No such process
Sep  3 06:02:03 George_PC dhcpcd: eth0: add_route: No such process
Sep  3 06:02:44 George_PC dhcpcd: eth0: add_route: No such process
Sep  3 06:03:09 George_PC dhcpcd: eth0: add_route: No such process
Sep  3 06:05:26 George_PC dhcpcd: dhcpcd: interface not found or invalid
Sep  3 06:26:40 George_PC dhcpcd: timed out
Sep  3 06:55:47 George_PC kernel: [drm:i915_gem_detect_bit_6_swizzle] *ERROR* Couldn't read from MCHBAR.  Disabling tiling.
Sep  3 06:55:55 George_PC kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Sep  3 06:55:55 George_PC kernel: ata2.00: BMDMA stat 0x25
Sep  3 06:55:55 George_PC kernel: ata2.00: cmd c8/00:08:ae:2b:5f/00:00:00:00:00/e0 tag 0 dma 4096 in
Sep  3 06:55:55 George_PC kernel: res 51/44:08:ae:2b:5f/00:00:00:00:00/e0 Emask 0x9 (media error)
Sep  3 06:55:55 George_PC kernel: ata2.00: status: { DRDY ERR }
Sep  3 06:55:55 George_PC kernel: ata2.00: error: { UNC ABRT }
Sep  3 06:55:55 George_PC kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Sep  3 06:55:55 George_PC kernel: ata2.00: BMDMA stat 0x25
Sep  3 06:55:55 George_PC kernel: ata2.00: cmd c8/00:08:ae:2b:5f/00:00:00:00:00/e0 tag 0 dma 4096 in
Sep  3 06:55:55 George_PC kernel: res 51/44:08:ae:2b:5f/00:00:00:00:00/e0 Emask 0x9 (media error)
Sep  3 06:55:55 George_PC kernel: ata2.00: status: { DRDY ERR }
Sep  3 06:55:55 George_PC kernel: ata2.00: error: { UNC ABRT }
Sep  3 06:55:55 George_PC kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Sep  3 06:55:55 George_PC kernel: ata2.00: BMDMA stat 0x25
Sep  3 06:55:55 George_PC kernel: ata2.00: cmd c8/00:08:ae:2b:5f/00:00:00:00:00/e0 tag 0 dma 4096 in
Sep  3 06:55:55 George_PC kernel: res 51/44:08:ae:2b:5f/00:00:00:00:00/e0 Emask 0x9 (media error)
Sep  3 06:55:55 George_PC kernel: ata2.00: status: { DRDY ERR }
Sep  3 06:55:55 George_PC kernel: ata2.00: error: { UNC ABRT }
Sep  3 06:55:55 George_PC kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Sep  3 06:55:55 George_PC kernel: ata2.00: BMDMA stat 0x25
Sep  3 06:55:55 George_PC kernel: ata2.00: cmd c8/00:08:ae:2b:5f/00:00:00:00:00/e0 tag 0 dma 4096 in
Sep  3 06:55:55 George_PC kernel: res 51/44:08:ae:2b:5f/00:00:00:00:00/e0 Emask 0x9 (media error)
Sep  3 06:55:55 George_PC kernel: ata2.00: status: { DRDY ERR }
Sep  3 06:55:55 George_PC kernel: ata2.00: error: { UNC ABRT }
Sep  3 06:55:55 George_PC kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Sep  3 06:55:55 George_PC kernel: ata2.00: BMDMA stat 0x25
Sep  3 06:55:55 George_PC kernel: ata2.00: cmd c8/00:08:ae:2b:5f/00:00:00:00:00/e0 tag 0 dma 4096 in
Sep  3 06:55:55 George_PC kernel: res 51/44:08:ae:2b:5f/00:00:00:00:00/e0 Emask 0x9 (media error)
Sep  3 06:55:55 George_PC kernel: ata2.00: status: { DRDY ERR }
Sep  3 06:55:55 George_PC kernel: ata2.00: error: { UNC ABRT }
Sep  3 06:55:55 George_PC kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Sep  3 06:55:55 George_PC kernel: ata2.00: BMDMA stat 0x25
Sep  3 06:55:55 George_PC kernel: ata2.00: cmd c8/00:08:ae:2b:5f/00:00:00:00:00/e0 tag 0 dma 4096 in
Sep  3 06:55:55 George_PC kernel: res 51/44:08:ae:2b:5f/00:00:00:00:00/e0 Emask 0x9 (media error)
Sep  3 06:55:55 George_PC kernel: ata2.00: status: { DRDY ERR }
Sep  3 06:55:55 George_PC kernel: ata2.00: error: { UNC ABRT }
Sep  3 06:55:55 George_PC kernel: end_request: I/O error, dev sda, sector 6237102
Sep  3 06:55:55 George_PC kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Sep  3 06:55:55 George_PC kernel: ata2.00: BMDMA stat 0x25
Sep  3 06:55:55 George_PC kernel: ata2.00: cmd c8/00:08:ae:2b:5f/00:00:00:00:00/e0 tag 0 dma 4096 in
Sep  3 06:55:55 George_PC kernel: res 51/44:08:ae:2b:5f/00:00:00:00:00/e0 Emask 0x9 (media error)
Sep  3 06:55:55 George_PC kernel: ata2.00: status: { DRDY ERR }
Sep  3 06:55:55 George_PC kernel: ata2.00: error: { UNC ABRT }
Sep  3 06:55:55 George_PC kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Sep  3 06:55:55 George_PC kernel: ata2.00: BMDMA stat 0x25
Sep  3 06:55:55 George_PC kernel: ata2.00: cmd c8/00:08:ae:2b:5f/00:00:00:00:00/e0 tag 0 dma 4096 in
Sep  3 06:55:55 George_PC kernel: res 51/44:08:ae:2b:5f/00:00:00:00:00/e0 Emask 0x9 (media error)
Sep  3 06:55:55 George_PC kernel: ata2.00: status: { DRDY ERR }
Sep  3 06:55:55 George_PC kernel: ata2.00: error: { UNC ABRT }
Sep  3 06:55:55 George_PC kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Sep  3 06:55:55 George_PC kernel: ata2.00: BMDMA stat 0x25
Sep  3 06:55:55 George_PC kernel: ata2.00: cmd c8/00:08:ae:2b:5f/00:00:00:00:00/e0 tag 0 dma 4096 in
Sep  3 06:55:55 George_PC kernel: res 51/44:08:ae:2b:5f/00:00:00:00:00/e0 Emask 0x9 (media error)
Sep  3 06:55:55 George_PC kernel: ata2.00: status: { DRDY ERR }
Sep  3 06:55:55 George_PC kernel: ata2.00: error: { UNC ABRT }
Sep  3 06:55:55 George_PC kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Sep  3 06:55:55 George_PC kernel: ata2.00: BMDMA stat 0x25
Sep  3 06:55:55 George_PC kernel: ata2.00: cmd c8/00:08:ae:2b:5f/00:00:00:00:00/e0 tag 0 dma 4096 in
Sep  3 06:55:55 George_PC kernel: res 51/44:08:ae:2b:5f/00:00:00:00:00/e0 Emask 0x9 (media error)
Sep  3 06:55:55 George_PC kernel: ata2.00: status: { DRDY ERR }
Sep  3 06:55:55 George_PC kernel: ata2.00: error: { UNC ABRT }
Sep  3 06:55:55 George_PC kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Sep  3 06:55:55 George_PC kernel: ata2.00: BMDMA stat 0x25
Sep  3 06:55:55 George_PC kernel: ata2.00: cmd c8/00:08:ae:2b:5f/00:00:00:00:00/e0 tag 0 dma 4096 in
Sep  3 06:55:55 George_PC kernel: res 51/44:08:ae:2b:5f/00:00:00:00:00/e0 Emask 0x9 (media error)
Sep  3 06:55:55 George_PC kernel: ata2.00: status: { DRDY ERR }
Sep  3 06:55:55 George_PC kernel: ata2.00: error: { UNC ABRT }
Sep  3 06:55:55 George_PC kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Sep  3 06:55:55 George_PC kernel: ata2.00: BMDMA stat 0x25
Sep  3 06:55:55 George_PC kernel: ata2.00: cmd c8/00:08:ae:2b:5f/00:00:00:00:00/e0 tag 0 dma 4096 in
Sep  3 06:55:55 George_PC kernel: res 51/44:08:ae:2b:5f/00:00:00:00:00/e0 Emask 0x9 (media error)
Sep  3 06:55:55 George_PC kernel: ata2.00: status: { DRDY ERR }
Sep  3 06:55:55 George_PC kernel: ata2.00: error: { UNC ABRT }
Sep  3 06:55:55 George_PC kernel: end_request: I/O error, dev sda, sector 6237102
Sep  3 06:55:56 George_PC kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
Sep  3 06:56:02 George_PC kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Sep  3 06:56:02 George_PC kernel: ata2.00: BMDMA stat 0x25
Sep  3 06:56:02 George_PC kernel: ata2.00: cmd c8/00:08:ae:2b:5f/00:00:00:00:00/e0 tag 0 dma 4096 in
Sep  3 06:56:02 George_PC kernel: res 51/44:08:ae:2b:5f/00:00:00:00:00/e0 Emask 0x9 (media error)

kernel is
     kernel26      2.6.30.5-1

Drivers are

     xf86-video-intel-legacy      2.3.2-3
(I have tried with      xf86-video-intel      2.8.1-1 too...Same thing)

Xorg created with Xorg -configure,and tried with hwd too.

The exact message is
the display server has been shut down about 6 times in the last 90 seconds.It is likely that something bad is going on.Waiting for 2 minutes before trying again on display :0

Last edited by kozer (2009-09-06 11:40:37)

Offline

#5 2009-09-06 22:10:19

flamelab
Member
From: Athens, Hellas (Greece)
Registered: 2007-12-26
Posts: 2,160

Re: eee pc 900 and arch problem with xorg ( i think)

Delete xorg.conf.

Then, try xf86-video-intel-intel as well.

Offline

#6 2009-09-06 22:18:49

apollokk
Member
From: Please delete me!
Registered: 2009-03-23
Posts: 157
Website

Re: eee pc 900 and arch problem with xorg ( i think)

There's a problem with drm.

Try xf86-video-intel-git with libdrm-git.

Or, use the modular mesa-git PKGBUILD to build the needed packages.

/me wants you to detele this account... please delete it.

Offline

#7 2009-09-07 00:00:10

kozer
Member
Registered: 2008-04-14
Posts: 20

Re: eee pc 900 and arch problem with xorg ( i think)

nothing at all sad The problem remains...

Offline

Pages: 1

Board footer

Powered by FluxBB