You are not logged in.

Pages: 1

#1 2009-09-10 23:04:41

A Future Pilot
Member
Registered: 2008-10-17
Posts: 120

OpenGL 3D Acceleration Problems

OK, so here's my problem.

When I have DefaultDepth 24 specified in my xorg.conf, OpenGL games work, but are very slow and jerky, and Xorg.0.log says that direct rendering is disabled, because dri only supports 16 bit depth.

When I change DefaultDepth to 16, OpenGL games don't work, but there isn't any warning like that in Xorg.0.log. How can I get the OpenGL games running fine? By the way, I have a very old monitor, but it does support 1024x768, however I don't know the actual HorizSync or VertRefresh.

Here's my xorg.conf and Xorg.0.log when it's specified to 16 bit:

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/misc"
    FontPath     "/usr/share/fonts/100dpi:unscaled"
    FontPath     "/usr/share/fonts/75dpi:unscaled"
    FontPath     "/usr/share/fonts/TTF"
    FontPath     "/usr/share/fonts/Type1"
EndSection

Section "Module"
    Load  "dbe"
    Load  "record"
    Load  "dri"
    Load  "dri2"
    Load  "glx"
    Load  "extmod"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
    Option        "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/input/mice"
    Option        "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
    #DisplaySize      260   200    # mm
    Identifier   "Monitor0"
    VendorName   "CPQ"
    ModelName    "1504"
    HorizSync    30 - 130
    VertRefresh 50 - 100
    Option        "DPMS"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "SWcursor"               # [<bool>]
        #Option     "ColorKey"               # <i>
        #Option     "CacheLines"             # <i>
        #Option     "Dac6Bit"                # [<bool>]
        #Option     "DRI"                    # [<bool>]
        #Option     "NoDDC"                  # [<bool>]
        #Option     "ShowCache"              # [<bool>]
        #Option     "XvMCSurfaces"           # <i>
        #Option     "PageFlip"               # [<bool>]
    Identifier  "Card0"
    Driver      "intel"
    VendorName  "Intel Corporation"
    BoardName   "82810 (CGC) Chipset Graphics Controller"
    BusID       "PCI:0:1:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    DefaultDepth 16
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
        Modes    "1024x768"
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH i686 
Current Operating System: Linux Programmer 2.6.30-ARCH #1 SMP PREEMPT Mon Aug 17 18:04:53 CEST 2009 i686
Build Date: 04 September 2009  03:37:03PM
 
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 10 12:53:57 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0xec0
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0:0:1:0) 8086:7121:109f:3151 Intel Corporation 82810 (CGC) Chipset Graphics Controller rev 3, Mem @ 0xf8000000/67108864, 0xf4000000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 2.8.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
    965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    Mobile Intel® GM45 Express Chipset,
    Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
    IGDNG_M
(II) Primary Device is: PCI 00@00:01:0
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
(**) intel(0): Depth 16, (--) framebuffer bpp 16
(==) intel(0): RGB weight 565
(==) intel(0): Default visual is TrueColor
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.2.1
    ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
(II) intel(0): initializing int10
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 1024 kB
(II) intel(0): VESA VBE OEM: Intel(R) 8xx Chipset Video BIOS
(II) intel(0): VESA VBE OEM Software Rev: 34.135
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(R) 8xx Chipset
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) intel(0): VESA VBE DDC supported
(II) intel(0): VESA VBE DDC Level 2
(II) intel(0): VESA VBE DDC transfer in appr. 1 sec.
(II) intel(0): VESA VBE DDC read successfully
(II) intel(0): Manufacturer: CPQ  Model: 1504  Serial#: 1362374713
(II) intel(0): Year: 1996  Week: 25
(II) intel(0): EDID Version: 1.0
(II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) intel(0): Sync:  Separate
(II) intel(0): Max Image Size [cm]: horiz.: 26  vert.: 20
(II) intel(0): Gamma: 2.09
(II) intel(0): DPMS capabilities: Suspend; RGB/Color Display
(II) intel(0): redX: 0.625 redY: 0.340   greenX: 0.302 greenY: 0.600
(II) intel(0): blueX: 0.142 blueY: 0.065   whiteX: 0.281 whiteY: 0.311
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): EDID (in hex):
(II) intel(0):     00ffffffffffff000e11041539303451
(II) intel(0):     19060100081a146d480672a0574d9924
(II) intel(0):     10484fa5480001010101010101010101
(II) intel(0):     01010101010101010101010101010101
(II) intel(0):     01010101010101010101010101010101
(II) intel(0):     01010101010101010101010101010101
(II) intel(0):     01010101010101010101010101010101
(II) intel(0):     01010101010101010101010101010070
(II) intel(0): EDID vendor "CPQ", prod id 5380
(II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 1x1 mode
(II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 1x1 mode
(II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 1x1 mode
(II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 1x1 mode
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(--) intel(0): Chipset: "i810"
(--) intel(0): Linear framebuffer at 0xF8000000
(--) intel(0): IO registers at addr 0xF4000000
(II) intel(0): Kernel reported 51712 total, 1 used
(II) intel(0): I810CheckAvailableMemory: 206844k available
(==) intel(0): Will alloc AGP framebuffer: 24576 kByte
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(II) intel(0): Monitor0: Using hsync range of 30.00-130.00 kHz
(II) intel(0): Monitor0: Using vrefresh range of 50.00-100.00 Hz
(II) intel(0): Clock range:   9.50 to 163.00 MHz
(II) intel(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1024x768" (unknown reason)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) intel(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) intel(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) intel(0): Not using default mode "1280x960" (width too large for virtual size)
(II) intel(0): Not using default mode "1280x960" (width too large for virtual size)
(II) intel(0): Not using default mode "1152x864" (width too large for virtual size)
(--) intel(0): Virtual size is 1024x768 (pitch 1024)
(**) intel(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) intel(0):  Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) intel(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz)
(**) intel(0):  Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) intel(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(**) intel(0):  Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(**) intel(0):  Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) intel(0):  Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(**) intel(0):  Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) intel(0):  Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) intel(0):  Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) intel(0): Modeline "800x600"x85.1   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz)
(**) intel(0):  Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) intel(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(**) intel(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) intel(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) intel(0):  Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) intel(0):  Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) intel(0):  Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) intel(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)
(**) intel(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) intel(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(**) intel(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) intel(0):  Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
(II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(**) intel(0):  Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) intel(0): Modeline "720x400"x85.0   35.50  720 756 828 936  400 401 404 446 -hsync +vsync (37.9 kHz)
(**) intel(0):  Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) intel(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401 404 445 -hsync +vsync (37.9 kHz)
(**) intel(0):  Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) intel(0): Modeline "640x350"x85.1   31.50  640 672 736 832  350 382 385 445 +hsync -vsync (37.9 kHz)
(**) intel(0): Display dimensions: (260, 200) mm
(**) intel(0): DPI set to (100, 97)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) intel(0): page flipping disabled
(II) intel(0): XvMC is Disabled: use XvMCSurfaces config option to enable.
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[b](OprU)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:01.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:01.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer handle = 0xf8000000
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(II) intel(0): [drm] Registers = 0xf4000000
(II) intel(0): [agp] dcacheHandle : 0x0
(II) intel(0): [agp] GART: no dcache memory found
(II) intel(0): [agp] Bound backbuffer memory
(II) intel(0): [agp] Bound depthbuffer memory
(II) intel(0): [agp] Bound System Texture Memory
(II) intel(0): [agp] GART: Allocated 4K for mouse cursor image
(II) intel(0): [agp] GART: Allocated 16K for ARGB mouse cursor image
(II) intel(0): Adding 768 scanlines for pixmap caching
(II) intel(0): Allocated Scratch Memory
(II) intel(0): [dri] Buffer map : 13fb000
(II) intel(0): [drm] added 256 4096 byte DMA buffers
(II) intel(0): [drm] Init v1.4 interface.
(II) intel(0): [drm] dma control initialized, using IRQ -22
(II) intel(0): [dri] visual configs initialized.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Setting dot clock to 65.0 MHz [ 0x3f 0xa 0x30 ] [ 65 12 3 ]
(II) intel(0): chose watermark 0x2210e000: (tab.freq 65.0)
(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Horizontal and Vertical Lines
    Setting up tile and stipple cache:
        24 128x128 slots
        6 256x256 slots
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(**) Option "dpms"
(**) intel(0): DPMS enabled
(II) intel(0): [DRI] installation complete
(II) intel(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:01.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:01.0
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i810_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 2.2.5
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event2"
(II) Logitech USB Receiver: Found 12 mouse buttons
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as mouse
(II) Logitech USB Receiver: Configuring as keyboard
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) filter chain progression: 2.00
(**) Logitech USB Receiver: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Receiver: (accel) set acceleration profile 0
(II) Logitech USB Receiver: initialized for relative axes.
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event1"
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"

Offline

#2 2009-09-10 23:09:45

flamelab
Member
From: Athens, Hellas (Greece)
Registered: 2007-12-26
Posts: 2,160

Re: OpenGL 3D Acceleration Problems

Delete your xorg.conf and try again (kill X and relogin) (create a backup first)

Offline

#3 2009-09-10 23:10:03

A Future Pilot
Member
Registered: 2008-10-17
Posts: 120

Re: OpenGL 3D Acceleration Problems

And here they are when DefaultDepth is 24:

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/misc"
    FontPath     "/usr/share/fonts/100dpi:unscaled"
    FontPath     "/usr/share/fonts/75dpi:unscaled"
    FontPath     "/usr/share/fonts/TTF"
    FontPath     "/usr/share/fonts/Type1"
EndSection

Section "Module"
    Load  "dbe"
    Load  "record"
    Load  "dri"
    Load  "dri2"
    Load  "glx"
    Load  "extmod"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
    Option        "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/input/mice"
    Option        "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
    #DisplaySize      260   200    # mm
    Identifier   "Monitor0"
    VendorName   "CPQ"
    ModelName    "1504"
    HorizSync    30 - 130
    VertRefresh 50 - 100
    Option        "DPMS"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "SWcursor"               # [<bool>]
        #Option     "ColorKey"               # <i>
        #Option     "CacheLines"             # <i>
        #Option     "Dac6Bit"                # [<bool>]
        #Option     "DRI"                    # [<bool>]
        #Option     "NoDDC"                  # [<bool>]
        #Option     "ShowCache"              # [<bool>]
        #Option     "XvMCSurfaces"           # <i>
        #Option     "PageFlip"               # [<bool>]
    Identifier  "Card0"
    Driver      "intel"
    VendorName  "Intel Corporation"
    BoardName   "82810 (CGC) Chipset Graphics Controller"
    BusID       "PCI:0:1:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    DefaultDepth 24
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
        Modes    "1024x768"
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH i686 
Current Operating System: Linux Programmer 2.6.30-ARCH #1 SMP PREEMPT Mon Aug 17 18:04:53 CEST 2009 i686
Build Date: 04 September 2009  03:37:03PM
 
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 10 13:03:54 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0xec0
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0:0:1:0) 8086:7121:109f:3151 Intel Corporation 82810 (CGC) Chipset Graphics Controller rev 3, Mem @ 0xf8000000/67108864, 0xf4000000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 2.8.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
    965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    Mobile Intel® GM45 Express Chipset,
    Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
    IGDNG_M
(II) Primary Device is: PCI 00@00:01:0
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
(**) intel(0): Depth 24, (--) framebuffer bpp 24
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.2.1
    ABI class: X.Org Video Driver, version 5.0
(WW) intel(0): DRI is disabled because it runs only at 16-bit depth.
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
(II) intel(0): initializing int10
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 1024 kB
(II) intel(0): VESA VBE OEM: Intel(R) 8xx Chipset Video BIOS
(II) intel(0): VESA VBE OEM Software Rev: 34.135
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(R) 8xx Chipset
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) intel(0): VESA VBE DDC supported
(II) intel(0): VESA VBE DDC Level 2
(II) intel(0): VESA VBE DDC transfer in appr. 1 sec.
(II) intel(0): VESA VBE DDC read successfully
(II) intel(0): Manufacturer: CPQ  Model: 1504  Serial#: 1362374713
(II) intel(0): Year: 1996  Week: 25
(II) intel(0): EDID Version: 1.0
(II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) intel(0): Sync:  Separate
(II) intel(0): Max Image Size [cm]: horiz.: 26  vert.: 20
(II) intel(0): Gamma: 2.09
(II) intel(0): DPMS capabilities: Suspend; RGB/Color Display
(II) intel(0): redX: 0.625 redY: 0.340   greenX: 0.302 greenY: 0.600
(II) intel(0): blueX: 0.142 blueY: 0.065   whiteX: 0.281 whiteY: 0.311
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): EDID (in hex):
(II) intel(0):     00ffffffffffff000e11041539303451
(II) intel(0):     19060100081a146d480672a0574d9924
(II) intel(0):     10484fa5480001010101010101010101
(II) intel(0):     01010101010101010101010101010101
(II) intel(0):     01010101010101010101010101010101
(II) intel(0):     01010101010101010101010101010101
(II) intel(0):     01010101010101010101010101010101
(II) intel(0):     01010101010101010101010101010070
(II) intel(0): EDID vendor "CPQ", prod id 5380
(II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 1x1 mode
(II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 1x1 mode
(II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 1x1 mode
(II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 1x1 mode
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(--) intel(0): Chipset: "i810"
(--) intel(0): Linear framebuffer at 0xF8000000
(--) intel(0): IO registers at addr 0xF4000000
(II) intel(0): Kernel reported 51712 total, 1 used
(II) intel(0): I810CheckAvailableMemory: 206844k available
(==) intel(0): Will alloc AGP framebuffer: 8192 kByte
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(II) intel(0): Monitor0: Using hsync range of 30.00-130.00 kHz
(II) intel(0): Monitor0: Using vrefresh range of 50.00-100.00 Hz
(II) intel(0): Estimated virtual size for aspect ratio 1.3000 is 1024x768
(II) intel(0): Clock range:   9.50 to 136.00 MHz
(II) intel(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1024x768" (unknown reason)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1152x864" (width too large for virtual size)
(II) intel(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1280x960" (width too large for virtual size)
(II) intel(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1280x960" (width too large for virtual size)
(II) intel(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) intel(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) intel(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) intel(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) intel(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(--) intel(0): Virtual size is 1024x768 (pitch 1024)
(**) intel(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) intel(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) intel(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz)
(**) intel(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) intel(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(**) intel(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(**) intel(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) intel(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(**) intel(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) intel(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) intel(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) intel(0): Modeline "800x600"x85.1   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz)
(**) intel(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) intel(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(**) intel(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) intel(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) intel(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) intel(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) intel(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) intel(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)
(**) intel(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) intel(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(**) intel(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) intel(0): *Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
(II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(**) intel(0): *Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) intel(0): Modeline "720x400"x85.0   35.50  720 756 828 936  400 401 404 446 -hsync +vsync (37.9 kHz)
(**) intel(0): *Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) intel(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401 404 445 -hsync +vsync (37.9 kHz)
(**) intel(0): *Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) intel(0): Modeline "640x350"x85.1   31.50  640 672 736 832  350 382 385 445 +hsync -vsync (37.9 kHz)
(**) intel(0): Display dimensions: (260, 200) mm
(**) intel(0): DPI set to (100, 97)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): XvMC is Disabled: use XvMCSurfaces config option to enable.
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Setting dot clock to 65.0 MHz [ 0x3f 0xa 0x30 ] [ 65 12 3 ]
(II) intel(0): chose watermark 0x22214000: (tab.freq 65.0)
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00000000 (pgoffset 0)
(WW) intel(0): xf86AllocateGARTMemory: allocation of 1024 pages failed
    (Cannot allocate memory)
(II) intel(0): No physical memory available for 4194304 bytes of DCACHE
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00800000 (pgoffset 2048)
(II) intel(0): Allocated of 4096 bytes for HW cursor
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x00801000 (pgoffset 2049)
(II) intel(0): Allocated of 16384 bytes for ARGB HW cursor
(II) intel(0): Adding 512 scanlines for pixmap caching
(II) intel(0): Allocated Scratch Memory
(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Horizontal and Vertical Lines
    Setting up tile and stipple cache:
        16 128x128 slots
        4 256x256 slots
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(**) Option "dpms"
(**) intel(0): DPMS enabled
(WW) intel(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 2.2.5
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event2"
(II) Logitech USB Receiver: Found 12 mouse buttons
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as mouse
(II) Logitech USB Receiver: Configuring as keyboard
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) filter chain progression: 2.00
(**) Logitech USB Receiver: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Receiver: (accel) set acceleration profile 0
(II) Logitech USB Receiver: initialized for relative axes.
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event1"
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"

You'll notice there is a lot of code talking about default mode not set, what's that all about?

Anyway, Thanks in advance!!!

Offline

#4 2009-09-10 23:11:01

A Future Pilot
Member
Registered: 2008-10-17
Posts: 120

Re: OpenGL 3D Acceleration Problems

Woah, you posted while I was doing that to get the other Xorg.0.log. I'll try that.

Offline

#5 2009-09-10 23:14:55

A Future Pilot
Member
Registered: 2008-10-17
Posts: 120

Re: OpenGL 3D Acceleration Problems

OK, here is the Xorg.0.log (assuming that's why you told me to do that :-)

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH i686 
Current Operating System: Linux Programmer 2.6.30-ARCH #1 SMP PREEMPT Mon Aug 17 18:04:53 CEST 2009 i686
Build Date: 04 September 2009  03:37:03PM
 
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 10 13:10:57 2009
(II) Loader magic: 0xec0
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0:0:1:0) 8086:7121:109f:3151 Intel Corporation 82810 (CGC) Chipset Graphics Controller rev 3, Mem @ 0xf8000000/67108864, 0xf4000000/524288
(==) Using default built-in configuration (39 lines)
(==) --- Start of built-in configuration ---
    Section "Device"
        Identifier    "Builtin Default intel Device 0"
        Driver    "intel"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default intel Screen 0"
        Device    "Builtin Default intel Device 0"
    EndSection
    Section "Device"
        Identifier    "Builtin Default i810 Device 0"
        Driver    "i810"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default i810 Screen 0"
        Device    "Builtin Default i810 Device 0"
    EndSection
    Section "Device"
        Identifier    "Builtin Default vesa Device 0"
        Driver    "vesa"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default vesa Screen 0"
        Device    "Builtin Default vesa Device 0"
    EndSection
    Section "Device"
        Identifier    "Builtin Default fbdev Device 0"
        Driver    "fbdev"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default fbdev Screen 0"
        Device    "Builtin Default fbdev Device 0"
    EndSection
    Section "ServerLayout"
        Identifier    "Builtin Default Layout"
        Screen    "Builtin Default intel Screen 0"
        Screen    "Builtin Default i810 Screen 0"
        Screen    "Builtin Default vesa Screen 0"
        Screen    "Builtin Default fbdev Screen 0"
    EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
    Using a default monitor configuration.
(**) |-->Screen "Builtin Default i810 Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default i810 Device 0"
(==) No monitor specified for screen "Builtin Default i810 Screen 0".
    Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (2)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
    Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (3)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
    Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 2.8.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "i810"
(WW) Warning, couldn't open module i810
(II) UnloadModule: "i810"
(EE) Failed to load module "i810" (module does not exist, 0)
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.2.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
    965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    Mobile Intel® GM45 Express Chipset,
    Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
    IGDNG_M
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:01:0
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
(II) intel(0): Creating default Display subsection in Screen section
    "Builtin Default intel Screen 0" for depth/fbbpp 16/16
(==) intel(0): Depth 16, (==) framebuffer bpp 16
(==) intel(0): RGB weight 565
(==) intel(0): Default visual is TrueColor
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.2.1
    ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
(II) intel(0): initializing int10
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 1024 kB
(II) intel(0): VESA VBE OEM: Intel(R) 8xx Chipset Video BIOS
(II) intel(0): VESA VBE OEM Software Rev: 34.135
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(R) 8xx Chipset
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) intel(0): VESA VBE DDC supported
(II) intel(0): VESA VBE DDC Level 2
(II) intel(0): VESA VBE DDC transfer in appr. 1 sec.
(II) intel(0): VESA VBE DDC read successfully
(II) intel(0): Manufacturer: CPQ  Model: 1504  Serial#: 1362374713
(II) intel(0): Year: 1996  Week: 25
(II) intel(0): EDID Version: 1.0
(II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) intel(0): Sync:  Separate
(II) intel(0): Max Image Size [cm]: horiz.: 26  vert.: 20
(II) intel(0): Gamma: 2.09
(II) intel(0): DPMS capabilities: Suspend; RGB/Color Display
(II) intel(0): redX: 0.625 redY: 0.340   greenX: 0.302 greenY: 0.600
(II) intel(0): blueX: 0.142 blueY: 0.065   whiteX: 0.281 whiteY: 0.311
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): EDID (in hex):
(II) intel(0):     00ffffffffffff000e11041539303451
(II) intel(0):     19060100081a146d480672a0574d9924
(II) intel(0):     10484fa5480001010101010101010101
(II) intel(0):     01010101010101010101010101010101
(II) intel(0):     01010101010101010101010101010101
(II) intel(0):     01010101010101010101010101010101
(II) intel(0):     01010101010101010101010101010101
(II) intel(0):     01010101010101010101010101010070
(II) intel(0): EDID vendor "CPQ", prod id 5380
(II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 1x1 mode
(II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 1x1 mode
(II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 1x1 mode
(II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 1x1 mode
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(--) intel(0): Chipset: "i810"
(--) intel(0): Linear framebuffer at 0xF8000000
(--) intel(0): IO registers at addr 0xF4000000
(II) intel(0): Kernel reported 51712 total, 1 used
(II) intel(0): I810CheckAvailableMemory: 206844k available
(==) intel(0): Will alloc AGP framebuffer: 24576 kByte
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(II) intel(0): <default monitor>: Using hsync range of 31.47-48.36 kHz
(II) intel(0): <default monitor>: Using vrefresh range of 59.94-75.00 Hz
(II) intel(0): Estimated virtual size for aspect ratio 1.3000 is 1024x768
(II) intel(0): Clock range:   9.50 to 163.00 MHz
(II) intel(0): Not using default mode "640x350" (vrefresh out of range)
(II) intel(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x400" (vrefresh out of range)
(II) intel(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "720x400" (vrefresh out of range)
(II) intel(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (hsync out of range)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1024x768" (unknown reason)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1024x768" (hsync out of range)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1024x768" (hsync out of range)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1024x768" (hsync out of range)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1152x864" (width too large for virtual size)
(II) intel(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1280x960" (width too large for virtual size)
(II) intel(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1280x960" (width too large for virtual size)
(II) intel(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) intel(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) intel(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) intel(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) intel(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "832x624" (hsync out of range)
(II) intel(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(--) intel(0): Virtual size is 1024x768 (pitch 1024)
(**) intel(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) intel(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) intel(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) intel(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) intel(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) intel(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(**) intel(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) intel(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) intel(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) intel(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) intel(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(**) intel(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) intel(0): *Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
(II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(**) intel(0): Display dimensions: (260, 200) mm
(**) intel(0): DPI set to (100, 97)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) intel(0): page flipping disabled
(II) intel(0): XvMC is Disabled: use XvMCSurfaces config option to enable.
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[b](OprU)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:01.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:01.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer handle = 0xf8000000
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(II) intel(0): [drm] Registers = 0xf4000000
(II) intel(0): [agp] dcacheHandle : 0x0
(II) intel(0): [agp] GART: no dcache memory found
(II) intel(0): [agp] Bound backbuffer memory
(II) intel(0): [agp] Bound depthbuffer memory
(II) intel(0): [agp] Bound System Texture Memory
(II) intel(0): [agp] GART: Allocated 4K for mouse cursor image
(II) intel(0): [agp] GART: Allocated 16K for ARGB mouse cursor image
(II) intel(0): Adding 768 scanlines for pixmap caching
(II) intel(0): Allocated Scratch Memory
(II) intel(0): [dri] Buffer map : 13fb000
(II) intel(0): [drm] added 256 4096 byte DMA buffers
(II) intel(0): [drm] Init v1.4 interface.
(II) intel(0): [drm] dma control initialized, using IRQ -22
(II) intel(0): [dri] visual configs initialized.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Setting dot clock to 65.0 MHz [ 0x3f 0xa 0x30 ] [ 65 12 3 ]
(II) intel(0): chose watermark 0x2210e000: (tab.freq 65.0)
(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Horizontal and Vertical Lines
    Setting up tile and stipple cache:
        24 128x128 slots
        6 256x256 slots
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): DPMS enabled
(II) intel(0): [DRI] installation complete
(II) intel(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:01.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:01.0
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i810_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 2.2.5
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event2"
(II) Logitech USB Receiver: Found 12 mouse buttons
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as mouse
(II) Logitech USB Receiver: Configuring as keyboard
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) filter chain progression: 2.00
(**) Logitech USB Receiver: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Receiver: (accel) set acceleration profile 0
(II) Logitech USB Receiver: initialized for relative axes.
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event1"
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) intel(0): Setting dot clock to 31.5 MHz [ 0x13 0x2 0x40 ] [ 21 4 4 ]
(II) intel(0): chose watermark 0x22007000: (tab.freq 31.5)
(II) intel(0): Setting dot clock to 65.0 MHz [ 0x3f 0xa 0x30 ] [ 65 12 3 ]
(II) intel(0): chose watermark 0x2210e000: (tab.freq 65.0)

Offline

#6 2009-09-10 23:42:31

A Future Pilot
Member
Registered: 2008-10-17
Posts: 120

Re: OpenGL 3D Acceleration Problems

The programs did the same thing as with DefaltDepth 16.

Offline

#7 2009-09-10 23:43:37

flamelab
Member
From: Athens, Hellas (Greece)
Registered: 2007-12-26
Posts: 2,160

Re: OpenGL 3D Acceleration Problems

That means that with or without xorg.conf, you have the same problem ?

Offline

#8 2009-09-10 23:48:57

A Future Pilot
Member
Registered: 2008-10-17
Posts: 120

Re: OpenGL 3D Acceleration Problems

Yep, but it's different with DefaultDepth 24, like I said.

Offline

#9 2009-09-11 02:04:31

superdav42
Member
Registered: 2009-01-07
Posts: 8
Website

Re: OpenGL 3D Acceleration Problems

From the man page:
intel is an Xorg driver for Intel integrated graphics chipsets.  The driver supports depths 8, 15, 16 and
       24.  All visual types are supported in depth 8.  For the i810/i815 other depths support the TrueColor and
       DirectColor  visuals.  For the i830M and later, only the TrueColor visual is supported for depths greater
       than 8.  The driver supports hardware accelerated 3D via the Direct Rendering Infrastructure  (DRI),  but
       only in depth 16 for the i810/i815 and depths 16 and 24 for the 830M and later.

So since you have an i810 you'll have to keep it on dept 16. Your first xorg.conf file looks fine I don't see anything there or in your first log file that would prevent opengl apps from working. What apps are you trying to run and what errors do they give? Also the output of glxinfo would be helpful.

Free cross platform games - Free games that will run in Windows, Linux and OS X.

My Homepage
Any Dog Breed

Offline

#10 2009-09-11 13:51:21

A Future Pilot
Member
Registered: 2008-10-17
Posts: 120

Re: OpenGL 3D Acceleration Problems

OK here's a link to what's happening: http://bbs.archlinux.org/viewtopic.php? … 03#p604003

I started that awhile back, as you can see I have a different xorg.conf, but it's still doing the same thing as shown when I run d1x-rebirth-gl or xmoto. I also have wings, and when I try to export to povray format it says: 

Trying OpenGL modes
  [{buffer_size,32},{depth_size,32},{stencil_size,8},{accum_size,16}]
  [{buffer_size,24},{depth_size,32},{stencil_size,8},{accum_size,16}]
  [{buffer_size,24},{depth_size,24},{stencil_size,8},{accum_size,16}]
  [{buffer_size,24},{depth_size,24},{stencil_size,0},{accum_size,16}]
  [{buffer_size,16},{depth_size,24},{stencil_size,8},{accum_size,16}]
  [{buffer_size,16},{depth_size,16},{stencil_size,8},{accum_size,16}]
  [{buffer_size,16},{depth_size,16},{stencil_size,0},{accum_size,16}]
  [{buffer_size,16},{depth_size,16},{stencil_size,0},{accum_size,0}]
  [{buffer_size,15},{depth_size,16},{stencil_size,8},{accum_size,16}]
  [{buffer_size,15},{depth_size,16},{stencil_size,0},{accum_size,16}]
  [{buffer_size,15},{depth_size,16},{stencil_size,0},{accum_size,0}]
  [{buffer_size,0},{depth_size,0},{stencil_size,0},{accum_size,0}]

###########################################

Failed to find any suitable OpenGL mode.

Make sure that OpenGL drivers are installed.


###########################################


Retrying with multisampling disabled.
Trying OpenGL modes
  [{buffer_size,32},{depth_size,32},{stencil_size,8},{accum_size,16}]
  [{buffer_size,24},{depth_size,32},{stencil_size,8},{accum_size,16}]
  [{buffer_size,24},{depth_size,24},{stencil_size,8},{accum_size,16}]
  [{buffer_size,24},{depth_size,24},{stencil_size,0},{accum_size,16}]
  [{buffer_size,16},{depth_size,24},{stencil_size,8},{accum_size,16}]
  [{buffer_size,16},{depth_size,16},{stencil_size,8},{accum_size,16}]
  [{buffer_size,16},{depth_size,16},{stencil_size,0},{accum_size,16}]
  [{buffer_size,16},{depth_size,16},{stencil_size,0},{accum_size,0}]
Actual: RGBA: 5 6 5 0 Depth: 16 Stencil: 0 Accum: 0 0 0 0
Export time:     7.073"

And here's glxinfo:

name of display: :0.0
display: :0  screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, 
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method, 
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, 
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory, 
    GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control, 
    GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control, 
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync, 
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, 
    GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, 
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method, 
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
OpenGL vendor string: Keith Whitwell
OpenGL renderer string: Mesa DRI i810 20050821 x86/MMX/SSE
OpenGL version string: 1.2 Mesa 7.5.1
OpenGL extensions:
    GL_ARB_draw_buffers, GL_ARB_imaging, GL_ARB_multisample, 
    GL_ARB_multitexture, GL_ARB_texture_compression, GL_ARB_texture_env_add, 
    GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar, 
    GL_ARB_texture_mirrored_repeat, GL_ARB_texture_rectangle, 
    GL_ARB_transpose_matrix, GL_ARB_vertex_buffer_object, GL_ARB_window_pos, 
    GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color, GL_EXT_blend_logic_op, 
    GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_compiled_vertex_array, 
    GL_EXT_convolution, GL_EXT_copy_texture, GL_EXT_draw_range_elements, 
    GL_EXT_histogram, GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, 
    GL_EXT_polygon_offset, GL_EXT_rescale_normal, 
    GL_EXT_separate_specular_color, GL_EXT_stencil_wrap, GL_EXT_subtexture, 
    GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp, 
    GL_EXT_texture_env_add, GL_EXT_texture_env_combine, 
    GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_texture_rectangle, 
    GL_EXT_vertex_array, GL_APPLE_packed_pixels, GL_IBM_multimode_draw_arrays, 
    GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat, 
    GL_MESA_ycbcr_texture, GL_MESA_window_pos, GL_NV_blend_square, 
    GL_NV_light_max_exponent, GL_NV_texture_rectangle, 
    GL_NV_texgen_reflection, GL_OES_read_format, GL_SGI_color_matrix, 
    GL_SGI_color_table, GL_SGIS_generate_mipmap, GL_SGIS_texture_edge_clamp, 
    GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays

16 GLX Visuals
   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x21 16 tc  0 16  0 r  y  .  5  6  5  0  0 16  0  0  0  0  0  0 0 None
0x22 16 dc  0 16  0 r  y  .  5  6  5  0  0 16  0  0  0  0  0  0 0 None
0x4e 16 tc  0 16  0 r  .  .  5  6  5  0  0 16  0  0  0  0  0  0 0 None
0x4f 16 tc  0 16  0 r  .  .  5  6  5  0  0 16  0 16 16 16  0  0 0 Slow
0x50 16 tc  0 16  0 r  y  .  5  6  5  0  0 16  0 16 16 16  0  0 0 Slow
0x51 16 tc  0 16  0 r  .  .  5  6  5  0  0 16  8  0  0  0  0  0 0 Slow
0x52 16 tc  0 16  0 r  .  .  5  6  5  0  0 16  8 16 16 16  0  0 0 Slow
0x53 16 tc  0 16  0 r  y  .  5  6  5  0  0 16  8  0  0  0  0  0 0 Slow
0x54 16 tc  0 16  0 r  y  .  5  6  5  0  0 16  8 16 16 16  0  0 0 Slow
0x55 16 dc  0 16  0 r  .  .  5  6  5  0  0 16  0  0  0  0  0  0 0 None
0x56 16 dc  0 16  0 r  .  .  5  6  5  0  0 16  0 16 16 16  0  0 0 Slow
0x57 16 dc  0 16  0 r  y  .  5  6  5  0  0 16  0 16 16 16  0  0 0 Slow
0x58 16 dc  0 16  0 r  .  .  5  6  5  0  0 16  8  0  0  0  0  0 0 Slow
0x59 16 dc  0 16  0 r  .  .  5  6  5  0  0 16  8 16 16 16  0  0 0 Slow
0x5a 16 dc  0 16  0 r  y  .  5  6  5  0  0 16  8  0  0  0  0  0 0 Slow
0x5b 16 dc  0 16  0 r  y  .  5  6  5  0  0 16  8 16 16 16  0  0 0 Slow

16 GLXFBConfigs:
   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x3e  0 tc  0 16  0 r  .  .  5  6  5  0  0 16  0  0  0  0  0  0 0 None
0x3f  0 tc  0 16  0 r  .  .  5  6  5  0  0 16  0 16 16 16  0  0 0 Slow
0x40  0 tc  0 16  0 r  y  .  5  6  5  0  0 16  0  0  0  0  0  0 0 None
0x41  0 tc  0 16  0 r  y  .  5  6  5  0  0 16  0 16 16 16  0  0 0 Slow
0x42  0 tc  0 16  0 r  .  .  5  6  5  0  0 16  8  0  0  0  0  0 0 Slow
0x43  0 tc  0 16  0 r  .  .  5  6  5  0  0 16  8 16 16 16  0  0 0 Slow
0x44  0 tc  0 16  0 r  y  .  5  6  5  0  0 16  8  0  0  0  0  0 0 Slow
0x45  0 tc  0 16  0 r  y  .  5  6  5  0  0 16  8 16 16 16  0  0 0 Slow
0x46  0 dc  0 16  0 r  .  .  5  6  5  0  0 16  0  0  0  0  0  0 0 None
0x47  0 dc  0 16  0 r  .  .  5  6  5  0  0 16  0 16 16 16  0  0 0 Slow
0x48  0 dc  0 16  0 r  y  .  5  6  5  0  0 16  0  0  0  0  0  0 0 None
0x49  0 dc  0 16  0 r  y  .  5  6  5  0  0 16  0 16 16 16  0  0 0 Slow
0x4a  0 dc  0 16  0 r  .  .  5  6  5  0  0 16  8  0  0  0  0  0 0 Slow
0x4b  0 dc  0 16  0 r  .  .  5  6  5  0  0 16  8 16 16 16  0  0 0 Slow
0x4c  0 dc  0 16  0 r  y  .  5  6  5  0  0 16  8  0  0  0  0  0 0 Slow
0x4d  0 dc  0 16  0 r  y  .  5  6  5  0  0 16  8 16 16 16  0  0 0 Slow

I notice there's a whole lot of them saying "Slow", does that mean anything?

Thanks for the help!!

Offline

#11 2009-09-11 23:55:55

jspaces
Member
From: Canada
Registered: 2009-04-16
Posts: 21

Re: OpenGL 3D Acceleration Problems

I would try to lower the frequencies on your monitor. Older CRTs that I have used never supported anything as high as you are using.
I found a Compaq 7550 used the following settings.
HorizSync 30-75
VertRefresh 50-85
These seen to be more reasonable for your CRT. Thus:

Section "Monitor"
    #DisplaySize      260   200    # mm
    Identifier   "Monitor0"
    VendorName   "CPQ"
    ModelName    "1504"
    HorizSync    30 - 75
    VertRefresh  50 - 85
    Option        "DPMS"
EndSection

Over driving the monitor could cause failure and possible release the one charge of smoke all electronic devices contain.
Do you have glproto, mesa and freeglut installed? If not try installing them and try again with the modified xorg.conf with the lower frequency settings.

Knowledge is a beam of light in which humans can only see the reflection.

Offline

#12 2009-09-12 00:41:17

A Future Pilot
Member
Registered: 2008-10-17
Posts: 120

Re: OpenGL 3D Acceleration Problems

OK, I modified xorg.conf like you said, and I had mesa and freeglut installed, but not glproto. So I installed glproto, and tried it, but I still get the same thing. :-(

Offline

#13 2009-09-12 14:29:24

jspaces
Member
From: Canada
Registered: 2009-04-16
Posts: 21

Re: OpenGL 3D Acceleration Problems

After checking the Intel Graphics Install website http://intellinuxgraphics.org/install.html, are the following applications/drivers installed:
intel-dri (This is the mesa intel DRI driver.)
libdrm
libgl
libxvmc

The following appears to be missing from the posted xorg.conf:

Section "DRI"
    Mode 0666
EndSection

This sets the permissions that should allow everyone to use the dri extension.
On that thought, do you have your user in the video group?

Knowledge is a beam of light in which humans can only see the reflection.

Offline

#14 2009-09-12 20:55:50

A Future Pilot
Member
Registered: 2008-10-17
Posts: 120

Re: OpenGL 3D Acceleration Problems

I tried all that, everything was already installed, and I added that to the xorg.conf, but I still get the same thing :-(

Offline

#15 2009-09-13 01:49:20

jspaces
Member
From: Canada
Registered: 2009-04-16
Posts: 21

Re: OpenGL 3D Acceleration Problems

Check the Xorg.0.log for the following errors:
1)  (bad mode clock/interlace/doublescan)
     (vrefresh out of range)
2)  (bad mode clock/interlace/doublescan)
     (hsync out of range)
If these are still present lower the maximum frequency values for the monitor until they disappear. Once gone record the frequency range for future reference. Without the manual it is the time consuming trail and error approach. You do want to have the highest value possible for the best results. Otherwise the monitor will appear to flicker and not be pleasant to view.
Do you have xf86-video-fbdev installed? If so try uninstalling it then restart X. You may want to try the xf86-video-intel-legacy driver as well.
If the issue is still not resolved post your latest xorg.conf, Xorg.0.log and the video drivers that are installed.

Edit > Check out read-edid http://aur.archlinux.org/packages.php?ID=13706. It may be able to read the information from your monitor and enable to easily get the right monitor specifications.

Last edited by jspaces (2009-09-13 02:52:47)

Knowledge is a beam of light in which humans can only see the reflection.

Offline

#16 2009-09-16 14:07:58

A Future Pilot
Member
Registered: 2008-10-17
Posts: 120

Re: OpenGL 3D Acceleration Problems

OK, sorry for the long wait roll I've been busy. :-)

So I tried lowering the max ranges until they disappeared, but they never did, it just eventually said, that there were no available modes. So I went and read the x.org wiki, and it said to raise it. So I did that, and I got the hsync and vrefresh errors gone, but they still all say bad mode clock/interlace/doublescan. And it still doesn't work. When I put DefaultDepth to 24, they work like they should, but their really jerky. I don't understand that, cause like you said it only supports 16 bit depth. hmmm. I'm on a different computer right now, but I'll try to upload the xorg.conf and Xorg.0.log later today.

Thanks!!

Offline

#17 2009-09-17 23:20:00

A Future Pilot
Member
Registered: 2008-10-17
Posts: 120

Re: OpenGL 3D Acceleration Problems

OK here's my xorg.conf and Xorg.0.log:

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/misc"
    FontPath     "/usr/share/fonts/100dpi:unscaled"
    FontPath     "/usr/share/fonts/75dpi:unscaled"
    FontPath     "/usr/share/fonts/TTF"
    FontPath     "/usr/share/fonts/Type1"
EndSection

Section "Module"
    Load  "dbe"
    Load  "record"
    Load  "dri"
    Load  "dri2"
    Load  "glx"
    Load  "extmod"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
    Option        "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/input/mice"
    Option        "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
    #DisplaySize      260   200    # mm
    Identifier   "Monitor0"
    VendorName   "CPQ"
    ModelName    "1504"
    HorizSync    20 - 80
    VertRefresh 40 - 100
    Option        "DPMS"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "SWcursor"               # [<bool>]
        #Option     "ColorKey"               # <i>
        #Option     "CacheLines"             # <i>
        #Option     "Dac6Bit"                # [<bool>]
        #Option     "DRI"                    # [<bool>]
        #Option     "NoDDC"                  # [<bool>]
        #Option     "ShowCache"              # [<bool>]
        #Option     "XvMCSurfaces"           # <i>
        #Option     "PageFlip"               # [<bool>]
    Identifier  "Card0"
    Driver      "intel"
    VendorName  "Intel Corporation"
    BoardName   "82810 (CGC) Chipset Graphics Controller"
    BusID       "PCI:0:1:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    DefaultDepth 16
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
        Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "DRI"
    Mode 0666
EndSection
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH i686 
Current Operating System: Linux Programmer 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 12:37:32 UTC 2009 i686
Build Date: 04 September 2009  03:37:03PM
 
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 17 18:18:56 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0xec0
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0:0:1:0) 8086:7121:109f:3151 Intel Corporation 82810 (CGC) Chipset Graphics Controller rev 3, Mem @ 0xf8000000/67108864, 0xf4000000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 2.8.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
    965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    Mobile Intel® GM45 Express Chipset,
    Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
    IGDNG_M
(II) Primary Device is: PCI 00@00:01:0
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
(**) intel(0): Depth 16, (--) framebuffer bpp 16
(==) intel(0): RGB weight 565
(==) intel(0): Default visual is TrueColor
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.2.1
    ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
(II) intel(0): initializing int10
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 1024 kB
(II) intel(0): VESA VBE OEM: Intel(R) 8xx Chipset Video BIOS
(II) intel(0): VESA VBE OEM Software Rev: 34.135
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(R) 8xx Chipset
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) intel(0): VESA VBE DDC supported
(II) intel(0): VESA VBE DDC Level 2
(II) intel(0): VESA VBE DDC transfer in appr. 1 sec.
(II) intel(0): VESA VBE DDC read successfully
(II) intel(0): Manufacturer: CPQ  Model: 1504  Serial#: 1362374713
(II) intel(0): Year: 1996  Week: 25
(II) intel(0): EDID Version: 1.0
(II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) intel(0): Sync:  Separate
(II) intel(0): Max Image Size [cm]: horiz.: 26  vert.: 20
(II) intel(0): Gamma: 2.09
(II) intel(0): DPMS capabilities: Suspend; RGB/Color Display
(II) intel(0): redX: 0.625 redY: 0.340   greenX: 0.302 greenY: 0.600
(II) intel(0): blueX: 0.142 blueY: 0.065   whiteX: 0.281 whiteY: 0.311
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): EDID (in hex):
(II) intel(0):     00ffffffffffff000e11041539303451
(II) intel(0):     19060100081a146d480672a0574d9924
(II) intel(0):     10484fa5480001010101010101010101
(II) intel(0):     01010101010101010101010101010101
(II) intel(0):     01010101010101010101010101010101
(II) intel(0):     01010101010101010101010101010101
(II) intel(0):     01010101010101010101010101010101
(II) intel(0):     01010101010101010101010101010070
(II) intel(0): EDID vendor "CPQ", prod id 5380
(II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 1x1 mode
(II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 1x1 mode
(II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 1x1 mode
(II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 1x1 mode
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(--) intel(0): Chipset: "i810"
(--) intel(0): Linear framebuffer at 0xF8000000
(--) intel(0): IO registers at addr 0xF4000000
(II) intel(0): Kernel reported 51712 total, 1 used
(II) intel(0): I810CheckAvailableMemory: 206844k available
(==) intel(0): Will alloc AGP framebuffer: 24576 kByte
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(II) intel(0): Monitor0: Using hsync range of 20.00-80.00 kHz
(II) intel(0): Monitor0: Using vrefresh range of 40.00-100.00 Hz
(II) intel(0): Clock range:   9.50 to 163.00 MHz
(II) intel(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1024x768" (unknown reason)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1280x960" (hsync out of range)
(II) intel(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1280x1024" (hsync out of range)
(II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1400x1050" (hsync out of range)
(II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) intel(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) intel(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) intel(0): Not using default mode "1280x960" (width too large for virtual size)
(II) intel(0): Not using default mode "1152x864" (width too large for virtual size)
(--) intel(0): Virtual size is 1024x768 (pitch 1024)
(**) intel(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) intel(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) intel(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) intel(0):  Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) intel(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz)
(**) intel(0):  Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) intel(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(**) intel(0):  Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(**) intel(0):  Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) intel(0):  Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(**) intel(0):  Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) intel(0):  Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) intel(0): Modeline "800x600"x85.1   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz)
(**) intel(0):  Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) intel(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(**) intel(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) intel(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) intel(0):  Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) intel(0):  Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) intel(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)
(**) intel(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) intel(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(**) intel(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) intel(0):  Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
(II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(**) intel(0):  Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) intel(0): Modeline "720x400"x85.0   35.50  720 756 828 936  400 401 404 446 -hsync +vsync (37.9 kHz)
(**) intel(0):  Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) intel(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401 404 445 -hsync +vsync (37.9 kHz)
(**) intel(0):  Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) intel(0): Modeline "640x350"x85.1   31.50  640 672 736 832  350 382 385 445 +hsync -vsync (37.9 kHz)
(**) intel(0): Display dimensions: (260, 200) mm
(**) intel(0): DPI set to (100, 97)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) intel(0): page flipping disabled
(II) intel(0): XvMC is Disabled: use XvMCSurfaces config option to enable.
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[b](OprU)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:01.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:01.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer handle = 0xf8000000
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(II) intel(0): [drm] Registers = 0xf4000000
(II) intel(0): [agp] dcacheHandle : 0x0
(II) intel(0): [agp] GART: no dcache memory found
(II) intel(0): [agp] Bound backbuffer memory
(II) intel(0): [agp] Bound depthbuffer memory
(II) intel(0): [agp] Bound System Texture Memory
(II) intel(0): [agp] GART: Allocated 4K for mouse cursor image
(II) intel(0): [agp] GART: Allocated 16K for ARGB mouse cursor image
(II) intel(0): Adding 768 scanlines for pixmap caching
(II) intel(0): Allocated Scratch Memory
(II) intel(0): [dri] Buffer map : 13fb000
(II) intel(0): [drm] added 256 4096 byte DMA buffers
(II) intel(0): [drm] Init v1.4 interface.
(II) intel(0): [drm] dma control initialized, using IRQ -22
(II) intel(0): [dri] visual configs initialized.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Setting dot clock to 65.0 MHz [ 0x3f 0xa 0x30 ] [ 65 12 3 ]
(II) intel(0): chose watermark 0x2210e000: (tab.freq 65.0)
(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Horizontal and Vertical Lines
    Setting up tile and stipple cache:
        24 128x128 slots
        6 256x256 slots
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(**) Option "dpms"
(**) intel(0): DPMS enabled
(II) intel(0): [DRI] installation complete
(II) intel(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:01.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:01.0
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i810_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 2.2.5
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event2"
(II) Logitech USB Receiver: Found 12 mouse buttons
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as mouse
(II) Logitech USB Receiver: Configuring as keyboard
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) filter chain progression: 2.00
(**) Logitech USB Receiver: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Receiver: (accel) set acceleration profile 0
(II) Logitech USB Receiver: initialized for relative axes.
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event1"
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"

Offline

#18 2009-09-30 18:01:11

A Future Pilot
Member
Registered: 2008-10-17
Posts: 120

Re: OpenGL 3D Acceleration Problems

I just got back from vacation, so I haven't been on in awhile. Can anyone think of something for me to do, or should I just give up? :-) I think it's probably my monitor, but I don't have another monitor to try out right now, so I don't know...

Offline

Pages: 1

Board footer

Powered by FluxBB