You are not logged in.

#1 2009-10-31 21:45:48

jxy
Member
Registered: 2008-12-03
Posts: 133

nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

After today's upgrade, X fails to start with segmentation fault.  When I downgraded nvidia/nvidia-utils to 185.18.36-2, xorg-server to 1.6.3.901-1 and related xf86-input-*, it starts to work.  Interestingly, neither combination of nvidia/nvidia-utils to 185.18.36-2 with xorg-server 1.7.1-1, nor nvidia/nvidia-utils 190.42-1 with xorg-server to 1.6.3.901-1 works.  After downgrading and playing it a little bit, I lost my original crash logs.

I guess I should post the problem here to see if anyone is seeing the same problem, before going back upgrading and hitting the bug again.  Of course, if you are interested in my Xorg.0.log, I can produce it again.

And by the way, I'm using arch64 on a lenovo t61p with nVidia Quadro FX 570M.  I guess the problem is new, and I don't have any luck with google, yet.

Offline

#2 2009-10-31 21:46:36

flamelab
Member
From: Athens, Hellas (Greece)
Registered: 2007-12-26
Posts: 2,160

Re: nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

Only nvidia 190.x is compatible with Xorg server 1.7 for now.

Offline

#3 2009-10-31 22:10:49

jxy
Member
Registered: 2008-12-03
Posts: 133

Re: nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

flamelab wrote:

Only nvidia 190.x is compatible with Xorg server 1.7 for now.

Right.  But it crashes with segmentation fault for me.  I guess I won't upgrade until the next release of nvidia driver.

Offline

#4 2009-10-31 22:14:46

Theoden
Member
Registered: 2005-03-03
Posts: 240

Re: nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

jxy wrote:

After today's upgrade, X fails to start with segmentation fault.  When I downgraded nvidia/nvidia-utils to 185.18.36-2, xorg-server to 1.6.3.901-1 and related xf86-input-*, it starts to work.  Interestingly, neither combination of nvidia/nvidia-utils to 185.18.36-2 with xorg-server 1.7.1-1, nor nvidia/nvidia-utils 190.42-1 with xorg-server to 1.6.3.901-1 works.  After downgrading and playing it a little bit, I lost my original crash logs.

I guess I should post the problem here to see if anyone is seeing the same problem, before going back upgrading and hitting the bug again.  Of course, if you are interested in my Xorg.0.log, I can produce it again.

And by the way, I'm using arch64 on a lenovo t61p with nVidia Quadro FX 570M.  I guess the problem is new, and I don't have any luck with google, yet.

Where did you find the pkgs to downgrade?  I use the nvidia-96xx drivers and they were never even upgraded - so nvidia here doesn't work at all now.  hmm

In need to downgrade b ut don't have the pkgs.  Help.

--Theoden


"If builders built buildings the way programmers write programs,
the first woodpecker that came along would destroy civilization."

Offline

#5 2009-10-31 22:19:20

flamelab
Member
From: Athens, Hellas (Greece)
Registered: 2007-12-26
Posts: 2,160

Re: nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

jxy wrote:
flamelab wrote:

Only nvidia 190.x is compatible with Xorg server 1.7 for now.

Right.  But it crashes with segmentation fault for me.  I guess I won't upgrade until the next release of nvidia driver.

Please post your xorg.conf here smile

PS I have no prob here, nvidia 190.x and Xorg-server 1.7

Offline

#6 2009-10-31 22:21:24

Pierre
Developer
From: Bonn
Registered: 2004-07-05
Posts: 1,964
Website

Re: nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

You need at least a geforce 6 to use xorg-server 1.7 atm.  It's unclear if nvidia will add support for older cards in future but I wouldn't be surprised if they wont.

Offline

#7 2009-10-31 22:23:25

jxy
Member
Registered: 2008-12-03
Posts: 133

Re: nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

Theoden wrote:
jxy wrote:

After today's upgrade, X fails to start with segmentation fault.  When I downgraded nvidia/nvidia-utils to 185.18.36-2, xorg-server to 1.6.3.901-1 and related xf86-input-*, it starts to work.  Interestingly, neither combination of nvidia/nvidia-utils to 185.18.36-2 with xorg-server 1.7.1-1, nor nvidia/nvidia-utils 190.42-1 with xorg-server to 1.6.3.901-1 works.  After downgrading and playing it a little bit, I lost my original crash logs.

I guess I should post the problem here to see if anyone is seeing the same problem, before going back upgrading and hitting the bug again.  Of course, if you are interested in my Xorg.0.log, I can produce it again.

And by the way, I'm using arch64 on a lenovo t61p with nVidia Quadro FX 570M.  I guess the problem is new, and I don't have any luck with google, yet.

Where did you find the pkgs to downgrade?  I use the nvidia-96xx drivers and they were never even upgraded - so nvidia here doesn't work at all now.  hmm

In need to downgrade b ut don't have the pkgs.  Help.

--Theoden

Because they are still in my /var/cache/pacman/pkg.  I guess you can find old packages on some arch rollback server.  I don't know exactly where they are.  Probably somebody knows, here.

Offline

#8 2009-10-31 22:25:26

flamelab
Member
From: Athens, Hellas (Greece)
Registered: 2007-12-26
Posts: 2,160

Re: nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

Pierre wrote:

You need at least a geforce 6 to use xorg-server 1.7 atm.  It's unclear if nvidia will add support for older cards in future but I wouldn't be surprised if they wont.

They usually add support for newer kernels and xorg-servers in the legacy drivers, but no new features.

Offline

#9 2009-10-31 22:26:51

jxy
Member
Registered: 2008-12-03
Posts: 133

Re: nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

flamelab wrote:
jxy wrote:
flamelab wrote:

Only nvidia 190.x is compatible with Xorg server 1.7 for now.

Right.  But it crashes with segmentation fault for me.  I guess I won't upgrade until the next release of nvidia driver.

Please post your xorg.conf here smile

PS I have no prob here, nvidia 190.x and Xorg-server 1.7

This is interesting.  What is your card?  The following is my xorg.conf with comments filered out.  (Because it was too long.)

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0     
EndSection                           

Section "Files"
    FontPath        "/usr/local/share/fonts/ttf/"
    FontPath        "/usr/local/share/fonts/windowsfonts/"
    FontPath        "/usr/share/fonts/TTF/"               
    FontPath        "/usr/share/fonts/artwiz-fonts/"      
    FontPath        "/usr/local/Wolfram/Mathematica/7.0/SystemFiles/Fonts/Type1/"
    FontPath        "/usr/share/fonts/misc/:unscaled"                            
    FontPath        "/usr/share/fonts/100dpi/:unscaled"                          
    FontPath        "/usr/share/fonts/75dpi/:unscaled"                           
    FontPath        "/usr/share/fonts/cyrillic/"                                 
EndSection                                                                       

Section "Monitor"
    Identifier     "LapTop LCD"
    VendorName     "lenovo T61p"
    ModelName      "LEN"        
EndSection                      

Section "Device"
    Option         "TwinViewXineramaInfoOrder" "DFP, CRT, TV"
    Identifier     "Videocard0"                              
    Driver         "nvidia"                                  
    VendorName     "NVIDIA Corporation"                      
    BoardName      "Quadro FX 570M"
    Screen          0
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "LapTop LCD"
    DefaultDepth    24
    Option         "NoLogo" "TRUE"
    Option         "DPI" "96 x 96"
    Option         "UseEdidDpi" "FALSE"
    Option         "ConstantDPI" "TRUE"
    Option         "AddARGBGLXVisuals" "true"
    SubSection     "Display"
        Viewport    0 0
        Depth       24
    EndSubSection
EndSection

Section "Extensions"
    Option         "Composite" "Enable"
EndSection

Offline

#10 2009-11-01 01:08:03

Mr.Elendig
#archlinux@freenode channel op
From: The intertubes
Registered: 2004-11-07
Posts: 4,094

Re: nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

xf86-video-nouveau can be a good alternative for those that have a <=5xxx card, but don't want to hold back xorg.


Evil #archlinux@libera.chat channel op and general support dude.
. files on github, Screenshots, Random pics and the rest

Offline

#11 2009-11-01 01:56:42

jxy
Member
Registered: 2008-12-03
Posts: 133

Re: nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

Mr.Elendig wrote:

xf86-video-nouveau can be a good alternative for those that have a <=5xxx card, but don't want to hold back xorg.

Last time I tried, it works badly with KDE.  And it has no power management support, which is quite important on a laptop.

Offline

#12 2009-11-01 03:06:56

jxy
Member
Registered: 2008-12-03
Posts: 133

Re: nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

It works after I comment out the line with "TwinViewXineramaInfoOrder".

Offline

#13 2009-11-01 11:55:15

knedlyk
Member
From: L'viv, Ukraine
Registered: 2009-04-14
Posts: 163
Website

Re: nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

Confirmed. nvidia-driver-96xx doesn't work with new Xorg server 1.7.
Xorg crashes with:

(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
dlopen: /usr/lib/xorg/modules/drivers/nvidia_drv.so: undefined symbol: resVgaShared
(EE) Failed to load /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) UnloadModule: "nvidia"
(EE) Failed to load module "nvidia" (loader failed, 7)
(EE) No drivers available.

Offline

#14 2009-11-01 12:41:50

Lone_Wolf
Administrator
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 12,939

Re: nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

Same here with a Ti 4200, i have switched to the NV driver.


Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky

Offline

#15 2009-11-01 14:37:33

kmiernik
Member
From: Poland
Registered: 2009-10-20
Posts: 48

Re: nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

I have also had a problems after update to Xorg 1.7 and nvidia-96xx. I have downgraded to Xorg 1.6 since on my Ti4200 with "nvidia" glxgears give me something like 3000 fps compared to 300 fps with "nv" driver. Even though now everything works fine there surely should be a BIG warning before this update!

Last edited by kmiernik (2009-11-01 14:38:24)

Offline

#16 2009-11-01 16:21:22

knedlyk
Member
From: L'viv, Ukraine
Registered: 2009-04-14
Posts: 163
Website

Re: nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

I filled out a bug report: http://bugs.archlinux.org/task/16958 .

Offline

#17 2009-11-01 16:28:17

skottish
Forum Fellow
From: Here
Registered: 2006-06-16
Posts: 7,942

Re: nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

knedlyk wrote:

I filled out a bug report: http://bugs.archlinux.org/task/16958 .

It's a known issue and Arch can't do anything about it. nVidia dropped support for the oldest cards, and support for the 173* and 96* cards hasn't been finished yet.

Offline

#18 2009-11-01 16:41:28

jonathan183
Member
Registered: 2008-06-11
Posts: 14

Re: nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

Where did you find the pkgs to downgrade?  I use the nvidia-96xx drivers and they were never even upgraded - so nvidia here doesn't work at all now.  hmm

In need to downgrade b ut don't have the pkgs.  Help.

--Theoden

I ran into xserver update problem today, I needed to downgrade, obtained older version of xf86-input... used http://wiki.archlinux.org/index.php/Downgrade_packages (already had xserver and utils in cache) then used

sudo pacman -U /var/cache/pacman/pkg/xorg-server-1.6.3.901-1-i686.pkg.tar.gz /var/cache/pacman/pkg/xorg-server-utils-7.4-7-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-input-evdev-2.2.5-1-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-input-keyboard-1.3.2-2-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-input-mouse-1.4.0-2-i686.pkg.tar.gz

Hope that helps until a fix is available smile

Offline

#19 2009-11-01 18:18:24

1LordAnubis
Member
Registered: 2008-10-10
Posts: 253
Website

Re: nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

I just encountered this error with nvidia-173xx, I guess the only solution is to manually search for and install the
older xorg packages? And wait for nvidia to possibly* add support for the new xorg?

X.Org X Server 1.7.1
Release Date: 2009-10-23
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-ARCH i686 
Current Operating System: Linux Thorin 2.6.31-ARCH #1 SMP PREEMPT Fri Oct 23 11:12:58 CEST 2009 i686
Kernel command line: root=/dev/disk/by-uuid/3902f419-5299-4a4e-8cc7-f31d3d7702a5 ro vga=773
Build Date: 25 October 2009  08:20:56PM
 
Current version of pixman: 0.16.2
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov  1 13:59:11 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "DontZap" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x81e5f40
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
(--) using VT number 8

(--) PCI:*(0:1:0:0) 10de:00c8:1558:0900 nVidia Corporation NV41.8 [GeForce Go 6800] rev 162, Mem @ 0xb2000000/16777216, 0xc0000000/268435456, 0xb1000000/16777216
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
(II) NVIDIA GLX Module  173.14.20  Thu Jun 25 19:49:59 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
dlopen: /usr/lib/xorg/modules/drivers/nvidia_drv.so: undefined symbol: resVgaShared
(EE) Failed to load /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) UnloadModule: "nvidia"
(EE) Failed to load module "nvidia" (loader failed, 7)
(EE) No drivers available.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support 
     at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

Edit: found my packages at http://www.schlunix.org/archlinux/extra/os/i686/ and did a downgrade,

anubis@Thorin ~/ $ sudo pacman -U /var/cache/pacman/pkg/xorg-server-1.6.3.901-1-i686.pkg.tar.gz /var/cache/pacman/pkg/xorg-server-utils-7.4-7-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-input-evdev-2.2.5-1-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-input-keyboard-1.3.2-2-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-input-mouse-1.4.0-2-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-input-synaptics-1.1.3-1-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-video-nv-2.1.14-1-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-video-vesa-2.2.0-1-i686.pkg.tar.gz

Last edited by 1LordAnubis (2009-11-01 23:07:34)


Any society that would give up a little liberty to gain a little security will deserve neither and lose both.
-Benjamin Franklin
The reasonable man adapts himself to the world; the unreasonable one persists in trying to adapt the world to himself. Therefore all progress depends on the unreasonable man.
-George Bernard Shaw

Offline

#20 2009-11-01 22:38:06

colbert
Member
Registered: 2007-12-16
Posts: 809

Re: nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

Well I kept getting a blank screen and frozen comp upon starting X server. jxy's solution worked for me (commented out TwinViewXineramaInfoOrder in xorg.conf). Not an ideal solution, though, of course...

Offline

#21 2009-11-01 22:57:46

ammon
Member
Registered: 2008-12-11
Posts: 413

Re: nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

This is confirmed with 1.7 xserver and 190.42 nvidia drivers.
Nvidia 8400m G

Last edited by ammon (2009-11-01 23:15:39)

Offline

#22 2009-11-01 23:00:01

flamelab
Member
From: Athens, Hellas (Greece)
Registered: 2007-12-26
Posts: 2,160

Re: nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

But there is no problem with Xorg-server and 190.42, only with 17x and older series.

Offline

#23 2009-11-02 00:09:25

pogeymanz
Member
Registered: 2008-03-11
Posts: 1,020

Re: nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

Is anyone having trouble with the new xorg/nvidia and using a custom kernel? I rebuilt the nvidia package to correspond to the custom kernel (like I've done 100 times before).

It says it can't find the nvidia module.

Offline

#24 2009-11-02 01:12:21

quantumphaze
Member
From: Melbourne, Australia
Registered: 2008-11-14
Posts: 175

Re: nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

I can't get X to start either, though it may be a different problem as there is no segfault. Right now I'm writing this in elinks.

Seems that there is a problem with the keyboard mappings.

X.Org X Server 1.7.1
Release Date: 2009-10-23
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-ARCH x86_64
Current Operating System: Linux sl500 2.6.31-ARCH #1 SMP PREEMPT Fri Oct 23 10:03:24 CEST 2009 x86_64
Kernel command line: root=/dev/disk/by-uuid/d850926b-6008-4336-9d21-ccc301eef24b ro vga=865 acpi_backlight=vendor
Build Date: 25 October 2009  08:16:52PM

Current version of pixman: 0.16.2
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov  2 11:52:43 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
(EE) Failed to load module "freetype" (module does not exist, 0)
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(EE) Couldn't open compiled keymap file /tmp/server-0.xkm
XKB: Failed to compile keymap
Keyboard initialization failed. This could be a missing or incorrect setup of xkeyboard-config.

Fatal server error:
Failed to activate core devices.

Please consult the The X.Org Foundation support
         at http://wiki.x.org
 for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

giving up.
xinit:  No such file or directory (errno 2):  unable to connect to X server
xinit:  No such process (errno 3):  Server error.

▁▂▃▄▅▆▇█▉▊▋▌▍▎▏▏▎▍▌▋▊▉█▇▆▅▄▃▂▁

Offline

#25 2009-11-02 02:05:01

giovanni
Developer
From: Livorno, Italy
Registered: 2005-04-07
Posts: 68

Re: nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

jxy wrote:

After today's upgrade, X fails to start with segmentation fault.

I had the same here.
Rebuilding myself nvidia-utils and nvidia packages works fine now.


Arch Linux forever
AUR & Pacman Italian Translations

Offline

Board footer

Powered by FluxBB