Openoffice does not work after upgrade [Never mind]

ShadowKyogre · 2009-11-02 23:42:13

After I upgraded and tried to use any openoffice component, I get this after running soffice in both fluxbox and KDE4:

[insertmyusernamehere@myhost ~]$ soffice
terminate called after throwing an instance of 'com::sun::star::uno::RuntimeException'

And this is the log of my system upgrade today. I know it cannot be the kernel since the last few times I was using the new kernel, openoffice was working perfectly until I tried using hwd (because it was one of those moments where my mouse failed again b/c of its batteries) to set xorg.conf (<-- I know, wut?)...and then I deleted the xorg.conf after taking out hwd and its dependencies. Turns out I had to make new settings...

[2009-11-02 13:52] synchronizing package lists
[2009-11-02 13:53] starting full system upgrade
[2009-11-02 13:54] starting full system upgrade
[2009-11-02 14:19] upgraded kernel-headers (2.6.30.5-1 -> 2.6.31.4-2)
[2009-11-02 14:19] Generating locales...
[2009-11-02 14:19]   en_US.UTF-8... done
[2009-11-02 14:19]   en_US.ISO-8859-1... done
[2009-11-02 14:19] Generation complete.
[2009-11-02 14:19] upgraded glibc (2.10.1-4 -> 2.10.1-5)
[2009-11-02 14:19] upgraded attr (2.4.43-1 -> 2.4.44-1)
[2009-11-02 14:19] upgraded acl (2.2.47-2 -> 2.2.48-1)
[2009-11-02 14:19] upgraded bash (4.0.033-1 -> 4.0.035-1)
[2009-11-02 14:19] upgraded binutils (2.19.1-5 -> 2.20-1)
[2009-11-02 14:19] upgraded dbus-glib (0.82-1 -> 0.82-2)
[2009-11-02 14:19] upgraded eigen (2.0.6-1 -> 2.0.9-1)
[2009-11-02 14:19] upgraded gcc-libs (4.4.1-1 -> 4.4.2-2)
[2009-11-02 14:19] upgraded libx11 (1.2.2-1 -> 1.3.2-1)
[2009-11-02 14:19] upgraded libxt (1.0.6-1 -> 1.0.7-1)
[2009-11-02 14:19] upgraded xulrunner (1.9.1.3-2 -> 1.9.1.4-1)
[2009-11-02 14:19] upgraded firefox (3.5.3-1 -> 3.5.4-1)
[2009-11-02 14:19] upgraded xextproto (7.0.5-1 -> 7.1.1-1)
[2009-11-02 14:19] upgraded fixesproto (4.0-3 -> 4.1.1-1)
[2009-11-02 14:20] upgraded gcc (4.4.1-1 -> 4.4.2-2)
[2009-11-02 14:20] upgraded gnutls (2.8.3-1 -> 2.8.4-1)
[2009-11-02 14:20] upgraded gstreamer0.10 (0.10.24-1 -> 0.10.25-1)
[2009-11-02 14:20] upgraded libxext (1.0.5-2 -> 1.1.1-1)
[2009-11-02 14:20] upgraded libxv (1.0.4-1 -> 1.0.5-1)
[2009-11-02 14:20] upgraded gstreamer0.10-base (0.10.24-1 -> 0.10.25-1)
[2009-11-02 14:20] upgraded libtheora (1.0-1 -> 1.1.1-1)
[2009-11-02 14:20] upgraded gstreamer0.10-base-plugins (0.10.24-1 -> 0.10.25-1)
[2009-11-02 14:20] upgraded gstreamer0.10-python (0.10.16-1 -> 0.10.17-1)
[2009-11-02 14:20] upgraded inputproto (1.5.1-2 -> 2.0-1)
[2009-11-02 14:20] upgraded libdrm (2.4.13-1 -> 2.4.15-1)
[2009-11-02 14:20] upgraded libxxf86vm (1.0.99.1-1 -> 1.1.0-1)
[2009-11-02 14:20] upgraded libxfixes (4.0.3-2 -> 4.0.4-1)
[2009-11-02 14:20] upgraded libxdamage (1.1.1-2 -> 1.1.2-1)
[2009-11-02 14:20] upgraded libgl (7.5.1-2 -> 7.6-2)
[2009-11-02 14:20] upgraded intel-dri (7.5.1-2 -> 7.6-2)
[2009-11-02 14:20] upgraded libmpcdec (1.2.6-1 -> 1.2.6-2)
[2009-11-02 14:20] upgraded taglib (1.6-1 -> 1.6.1-1)
[2009-11-02 14:20] upgraded k3b (1.66.0alpha2-3 -> 1.68.0alpha3-1)
[2009-11-02 14:20] >>> Updating module dependencies. Please wait ...
[2009-11-02 14:20] >>> MKINITCPIO SETUP
[2009-11-02 14:20] >>> ----------------
[2009-11-02 14:20] >>> If you use LVM2, Encrypted root or software RAID,
[2009-11-02 14:20] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2009-11-02 14:20] >>> More information about mkinitcpio setup can be found here:
[2009-11-02 14:20] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2009-11-02 14:20] 
[2009-11-02 14:20] >>> Generating initial ramdisk, using mkinitcpio.  Please wait...
[2009-11-02 14:20] ==> Building image "default"
[2009-11-02 14:20] ==> Running command: /sbin/mkinitcpio -k 2.6.31-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2009-11-02 14:20] :: Begin build
[2009-11-02 14:20] :: Parsing hook [base]
[2009-11-02 14:20] :: Parsing hook [udev]
[2009-11-02 14:20] :: Parsing hook [autodetect]
[2009-11-02 14:20] :: Parsing hook [pata]
[2009-11-02 14:20] :: Parsing hook [scsi]
[2009-11-02 14:20] :: Parsing hook [sata]
[2009-11-02 14:20] :: Parsing hook [usb]
[2009-11-02 14:20] :: Parsing hook [pcmcia]
[2009-11-02 14:20] :: Parsing hook [usbinput]
[2009-11-02 14:20] :: Parsing hook [keymap]
[2009-11-02 14:20] :: Parsing hook [filesystems]
[2009-11-02 14:20] :: Generating module dependencies
[2009-11-02 14:20] :: Generating image '/boot/kernel26.img'...SUCCESS
[2009-11-02 14:20] ==> SUCCESS
[2009-11-02 14:20] ==> Building image "fallback"
[2009-11-02 14:20] ==> Running command: /sbin/mkinitcpio -k 2.6.31-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2009-11-02 14:20] :: Begin build
[2009-11-02 14:21] :: Parsing hook [base]
[2009-11-02 14:21] :: Parsing hook [udev]
[2009-11-02 14:21] :: Parsing hook [pata]
[2009-11-02 14:21] :: Parsing hook [scsi]
[2009-11-02 14:21] :: Parsing hook [sata]
[2009-11-02 14:21] :: Parsing hook [usb]
[2009-11-02 14:21] :: Parsing hook [pcmcia]
[2009-11-02 14:21] :: Parsing hook [usbinput]
[2009-11-02 14:21] :: Parsing hook [keymap]
[2009-11-02 14:21] :: Parsing hook [filesystems]
[2009-11-02 14:21] :: Generating module dependencies
[2009-11-02 14:21] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2009-11-02 14:21] ==> SUCCESS
[2009-11-02 14:21] upgraded kernel26 (2.6.31.4-1 -> 2.6.31.5-1)
[2009-11-02 14:21] upgraded libdmx (1.0.99.1-1 -> 1.1.0-1)
[2009-11-02 14:21] upgraded libgphoto2 (2.4.6-3 -> 2.4.7-1)
[2009-11-02 14:21] upgraded libgsf (1.14.15-1 -> 1.14.16-1)
[2009-11-02 14:22] upgraded libldap (2.4.18-1 -> 2.4.19-1)
[2009-11-02 14:22] upgraded libxmu (1.0.4-2 -> 1.0.5-1)
[2009-11-02 14:22] upgraded libxpm (3.5.7-2 -> 3.5.8-1)
[2009-11-02 14:22] upgraded libxaw (1.0.6-1 -> 1.0.7-1)
[2009-11-02 14:22] upgraded libxcomposite (0.4.0-2 -> 0.4.1-1)
[2009-11-02 14:22] upgraded libxdmcp (1.0.2-2 -> 1.0.3-1)
[2009-11-02 14:22] upgraded libxfont (1.4.0-1 -> 1.4.1-1)
[2009-11-02 14:22] upgraded libxfontcache (1.0.4-2 -> 1.0.5-1)
[2009-11-02 14:22] upgraded renderproto (0.9.3-2 -> 0.11-1)
[2009-11-02 14:22] upgraded libxrender (0.9.4-2 -> 0.9.5-1)
[2009-11-02 14:22] upgraded libxft (2.1.13-1 -> 2.1.14-1)
[2009-11-02 14:22] upgraded libxi (1.2.1-1 -> 1.3-2)
[2009-11-02 14:22] upgraded libxinerama (1.0.99.1-1 -> 1.1-1)
[2009-11-02 14:22] upgraded libxkbfile (1.0.5-1 -> 1.0.6-1)
[2009-11-02 14:22] upgraded libxtst (1.0.3-2 -> 1.1.0-1)
[2009-11-02 14:22] upgraded libxvmc (1.0.4-2 -> 1.0.5-1)
[2009-11-02 14:22] upgraded libxxf86dga (1.1.1-0.1 -> 1.1.1-1)
[2009-11-02 14:22] upgraded libxxf86misc (1.0.1-2 -> 1.0.2-1)
[2009-11-02 14:22] upgraded mesa (7.5.1-2 -> 7.6-2)
[2009-11-02 14:22] upgraded nspr (4.8-1 -> 4.8.2-1)
[2009-11-02 14:22] upgraded openssh (5.3p1-1 -> 5.3p1-2)
[2009-11-02 14:22] upgraded pcre (7.9-1 -> 8.00-1)
[2009-11-02 14:22] upgraded sg3_utils (1.27-2 -> 1.28-1)
[2009-11-02 14:22] upgraded shared-mime-info (0.70-1 -> 0.70-2)
[2009-11-02 14:22] upgraded xf86-input-evdev (2.2.5-1 -> 2.3.0-1)
[2009-11-02 14:22] upgraded xf86-video-intel (2.8.1-1 -> 2.9.1-1)
[2009-11-02 14:22] upgraded xf86-video-vesa (2.2.0-1 -> 2.2.1-1)
[2009-11-02 14:22] upgraded xorg-apps (7.5-1.1 -> 7.5-2)
[2009-11-02 14:22] upgraded xorg-font-utils (7.4-3 -> 7.5-2)
[2009-11-02 14:22] upgraded xorg-fonts-alias (1.0.1-2 -> 1.0.2-1)
[2009-11-02 14:22] Regenerating font encodings... done.
[2009-11-02 14:22] upgraded xorg-fonts-encodings (1.0.2-3 -> 1.0.3-1)
[2009-11-02 14:22] upgraded xorg-server-utils (7.4-7 -> 7.5-3)
[2009-11-02 14:22] upgraded xorg-server (1.6.3.901-1 -> 1.7.1-1)
[2009-11-02 14:22] installed printproto (1.0.4-1)
[2009-11-02 14:22] installed libxp (1.0.0-3)
[2009-11-02 14:22] upgraded xorg-utils (7.4-4 -> 7.5-1)
[2009-11-02 14:22] upgraded xorg-xauth (1.0.3-1 -> 1.0.4-1)
[2009-11-02 14:22] upgraded xorg-xkb-utils (7.4-2 -> 7.5-1)
[2009-11-02 14:22] NOTE:
[2009-11-02 14:22]   If you experience any problems after upgrading xsane 
[2009-11-02 14:22]   it may help to remove the setup and preferences files
[2009-11-02 14:22]   of xsane:
[2009-11-02 14:22] 
[2009-11-02 14:22]     $ rm -rf ~/.sane/xsane
[2009-11-02 14:22] 
[2009-11-02 14:22] upgraded xsane (0.996-2 -> 0.997-1)
[2009-11-02 14:22] upgraded xterm (246-1 -> 250-1)
[2009-11-02 15:01] installed ddcxinfo-arch (0.8-2)
[2009-11-02 15:01] 
[2009-11-02 15:01] lshwd dependency is replaced by pciutils and usbutils.
[2009-11-02 15:01] 
[2009-11-02 15:01] Run 'hwd -u' to update xorgtable, pci-, and usb.ids.
[2009-11-02 15:01] 
[2009-11-02 15:01] installed hwd (5.5.2-1)
[2009-11-02 15:10] removed hwd (5.5.2-1)
[2009-11-02 15:10] removed ddcxinfo-arch (0.8-2)

Last edited by ShadowKyogre (2009-11-03 05:18:31)

AndyRTR · 2009-11-03 05:17:08

What OOo branch is it (pacman -Q)? What's in your /etc/profile.d/openoffice*.sh ?

riivo · 2009-11-03 09:00:47

I have the same problem. Probably started after the xorg-server update. This error only appears with openoffice-base, because openoffice-base-beta works fine.

riivo · 2009-11-15 13:48:54

Removing the config directory solved the problem for me.

rm -rf ~/.openoffice.org

Last edited by riivo (2009-11-15 14:04:42)

Arch Linux

#1 2009-11-02 23:42:13

Openoffice does not work after upgrade [Never mind]

#2 2009-11-03 05:17:08

Re: Openoffice does not work after upgrade [Never mind]

#3 2009-11-03 09:00:47

Re: Openoffice does not work after upgrade [Never mind]

#4 2009-11-15 13:48:54

Re: Openoffice does not work after upgrade [Never mind]

Board footer