You are not logged in.
Finally! For all you who were in the dark like me, you can grab 0.10.1 here
Just unpack it, run ./autogen.sh, and make!
I need to find a way out so everyone can find their way out.
Resregietd Lunix Uesr: 485581
Offline
Hmm, didn't work for me.
did you just do
./autogen.sh
make
make install
?
Pinky, are you pondering what I'm pondering?
Offline
Yeah. autogen requires a package be installed as a build dependency, I can't remember what it was though.
xorg macro something.
Also, clicking doesn't work (at least for me), but technically this is a dev release
I need to find a way out so everyone can find their way out.
Resregietd Lunix Uesr: 485581
Offline
Hmm, didn't work for me.
did you just do
./autogen.sh make make install
?
stick a ./configure in there too before the make.
Offline
here is some error part regarding wacom in Xorg log:
(II) config/hal: Adding input device Wacom Serial Tablet PC Pen Tablet/Digitizer
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 1.7.1.902, module version = 0.10.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Option "Device" "/dev/ttyS0"
(EE) Wacom Serial Tablet PC Pen Tablet/Digitizer: wcmIsAValidType unable to ioctl key bits.
(II) UnloadModule: "wacom"
(EE) PreInit returned NULL for "Wacom Serial Tablet PC Pen Tablet/Digitizer"
(EE) config/hal: NewInputDeviceRequest failed (8)
Last edited by lynucs (2009-11-25 00:13:40)
Pinky, are you pondering what I'm pondering?
Offline
actually, autogen does .configure for you after it does some other stuff. (I thought the same thing, but read the output from autogen.sh and ./configure and you'll see they're almost the same.)
As far as hal goes, support is buggy at best according to the release notes.
Looking forward to the official non-developer plays-nice-with-hal 0.11 release!
I need to find a way out so everyone can find their way out.
Resregietd Lunix Uesr: 485581
Offline
here is some error part regarding wacom in Xorg log:
(II) config/hal: Adding input device Wacom Serial Tablet PC Pen Tablet/Digitizer (II) LoadModule: "wacom" (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so (II) Module wacom: vendor="X.Org Foundation" compiled for 1.7.1.902, module version = 0.10.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) Option "Device" "/dev/ttyS0" (EE) Wacom Serial Tablet PC Pen Tablet/Digitizer: wcmIsAValidType unable to ioctl key bits. (II) UnloadModule: "wacom" (EE) PreInit returned NULL for "Wacom Serial Tablet PC Pen Tablet/Digitizer" (EE) config/hal: NewInputDeviceRequest failed (8)
I get the same result when trying the xf86-input-wacom-git package from AUR (http://aur.archlinux.org/packages.php?ID=32033). I tried to experiment with the commit http://cgit.freedesktop.org/~whot/xf86- … 652e45d4e5 but have not yet found a way to get X with wacom working.
Offline
with xorg 1.7.2 I get no segfault with linuxwacom, but the screen stays black and i can't switch to any VT.
Seems that intel graphics, kms, xorg and wacom do not play well together on my x41t.
Pinky, are you pondering what I'm pondering?
Offline
This is a tablet PC screen, not a separate pen tablet that you can try booting unplugged I guess.
Offline
Tried xf86-input-wacom-git today again and get no segfault when I comment out every trace of wacom in my xorg.conf. Stylus works but cannot right click and it does not rotate with my screen.
Then I reenabled my xorg.conf wacom settings step by step and did not get any errors. Stylus can right-click but the click is done immediatly when I press the thumb button - not when I hold it and then click the screen. The stylus could not be configured (no wacomcpl in xf86-input-wacom?) and it could not be rotated.
Installed linuxwacom 0.8.4-9 and everything works as good as ever...
The conf I'm using on my x61t: http://gist.github.com/248310
Offline
Oh well, after rebooting it does not work any longer. X crashes again with a segmentation fault. Somehow the mix of installing xf86-input-wacom, removing it and installing linuxwacom resulted in a very usable solution until the next reboot
Last edited by anteater (2009-12-03 18:37:43)
Offline
okay, tried to roll back to: xorg-server-1.7.1.901-2-i686.pkg.tar.gz and to xorg-server-1.7.1.902-1-i686.pkg.tar.gz on my x41t. With that xorg-version linuxwacom was already running some day. Guess what - still segfautls on startx x when linuxwacom installed. I have the feeling, that it's not (only) the xorg-server issue. Maybe it's a matter of some new kernel, kms or some lib like glibc which was updated?
Now i have tried it also with older kernel and disabled KMS, no luck either.
Curious..
Here's the output of startx:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.1.901 (1.7.2 RC 1)
Release Date: 2009-11-6
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-ARCH i686
Current Operating System: Linux thinky 2.6.31-ARCH #1 SMP PREEMPT Fri Oct 23 11:12:58 CEST 2009 i686
Kernel command line: root=/dev/disk/by-uuid/50949b43-aad8-4621-a413-3843eecd13c7 resume=/dev/sda3 ro
Build Date: 08 November 2009 04:12:47PM
Current version of pixman: 0.16.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 11 00:11:43 2009
(==) Using default built-in configuration (30 lines)
(EE) open /dev/fb0: No such file or directory
Setting master
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
usbDetect: can not ioctl version
(==) Wacom using pressure threshold of 15 for button 1
(==) Wacom General ISDV4 tablet speed=9600 (19200) maxX=24576 maxY=18432 maxZ=255 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Serial Tablet PC Pen Tablet/Digitizer" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(EE) Wacom Serial Tablet PC Pen Tablet/Digitizer eraser: Top/Bottom area overlaps with another devices.
(EE) Couldn't init device "Wacom Serial Tablet PC Pen Tablet/Digitizer eraser"
Backtrace:
0: /usr/bin/X (xorg_backtrace+0x3b) [0x809cbcb]
1: /usr/bin/X (0x8048000+0x52f15) [0x809af15]
2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb76f340c]
3: /usr/lib/xorg/modules/input/wacom_drv.so (0xa6ca2000+0xd98c) [0xa6caf98c]
4: /usr/bin/X (0x8048000+0x601a8) [0x80a81a8]
5: /usr/bin/X (NewInputDeviceRequest+0x1e5) [0x80a85b5]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.1.901 (1.7.2 RC 1)
Release Date: 2009-11-6
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-ARCH i686
Current Operating System: Linux thinky 2.6.31-ARCH #1 SMP PREEMPT Fri Oct 23 11:12:58 CEST 2009 i686
Kernel command line: root=/dev/disk/by-uuid/50949b43-aad8-4621-a413-3843eecd13c7 resume=/dev/sda3 ro
Build Date: 08 November 2009 04:12:47PM
Current version of pixman: 0.16.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 11 00:12:19 2009
(==) Using default built-in configuration (30 lines)
(EE) open /dev/fb0: No such file or directory
Setting master
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
usbDetect: can not ioctl version
(==) Wacom using pressure threshold of 15 for button 1
(==) Wacom General ISDV4 tablet speed=9600 (19200) maxX=24576 maxY=18432 maxZ=255 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Serial Tablet PC Pen Tablet/Digitizer" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(EE) Wacom Serial Tablet PC Pen Tablet/Digitizer eraser: Top/Bottom area overlaps with another devices.
(EE) Couldn't init device "Wacom Serial Tablet PC Pen Tablet/Digitizer eraser"
Backtrace:
0: /usr/bin/X (xorg_backtrace+0x3b) [0x809cbcb]
1: /usr/bin/X (0x8048000+0x52f15) [0x809af15]
2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb770440c]
3: /usr/lib/xorg/modules/input/wacom_drv.so (0xa6cb3000+0xd98c) [0xa6cc098c]
4: /usr/bin/X (0x8048000+0x601a8) [0x80a81a8]
5: /usr/bin/X (NewInputDeviceRequest+0x1e5) [0x80a85b5]
6: /usr/bin/X (0x8048000+0x44edc) [0x808cedc]
7: /usr/bin/X (0x8048000+0x45518) [0x808d518]
8: /usr/bin/X (0x8048000+0x45640) [0x808d640]
9: /usr/bin/X (0x8048000+0x103510) [0x814b510]
10: /usr/bin/X (0x8048000+0x4bf47) [0x8093f47]
11: /usr/bin/X (WaitForSomething+0x46f) [0x80944bf]
12: /usr/bin/X (0x8048000+0x27760) [0x806f760]
13: /usr/bin/X (0x8048000+0x1ab45) [0x8062b45]
14: /lib/libc.so.6 (__libc_start_main+0xe6) [0xb732db86]
15: /usr/bin/X (0x8048000+0x1a731) [0x8062731]
Segmentation fault at address 0x8
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
_Any_ hints are welcome.
EDIT:
oh, by the way, when I install linuxwacom, i also can't switch to any VT. it's just a black screen with a non blinking cursor in the left top corner. without kms, there's just a black screen w/o a cursor.
Last edited by lynucs (2009-12-10 23:20:56)
Pinky, are you pondering what I'm pondering?
Offline
seems to work with aur's xf86-input-wacom-git now.
Pinky, are you pondering what I'm pondering?
Offline