T400 realtek wifi fails after short use, given IOMMU errors in dmesg

hm_shurt · 2009-11-05 20:43:35

I was checking the Ubuntu forum and there are or have been apparently other problems with intel wireless chips and/or their linux drivers. Good luck!

https://bugs.launchpad.net/ubuntu/+sour … bug/348204

Miitch · 2009-11-05 20:53:12

Aha I am using e1000e.

here is my dmesg, But i cant find any erro messages from before the reboot

Linux version 2.6.31-ARCH (root@architect) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Oct 23 10:03:24 CEST 2009
Command line: root=/dev/disk/by-uuid/c1bf4cf3-be7d-44ce-a156-49fdd1880b83  resume=/dev/sda2 ro fastboot mem=4G iommu=off acpi_osi="Linux" vga=773 quiet
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
 BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bd4a1000 (usable)
 BIOS-e820: 00000000bd4a1000 - 00000000bd4a7000 (reserved)
 BIOS-e820: 00000000bd4a7000 - 00000000bd5b7000 (usable)
 BIOS-e820: 00000000bd5b7000 - 00000000bd60f000 (reserved)
 BIOS-e820: 00000000bd60f000 - 00000000bd6c6000 (usable)
 BIOS-e820: 00000000bd6c6000 - 00000000bd6d1000 (ACPI NVS)
 BIOS-e820: 00000000bd6d1000 - 00000000bd6d4000 (ACPI data)
 BIOS-e820: 00000000bd6d4000 - 00000000bd6d8000 (reserved)
 BIOS-e820: 00000000bd6d8000 - 00000000bd6dc000 (ACPI NVS)
 BIOS-e820: 00000000bd6dc000 - 00000000bd6df000 (reserved)
 BIOS-e820: 00000000bd6df000 - 00000000bd706000 (ACPI NVS)
 BIOS-e820: 00000000bd706000 - 00000000bd708000 (ACPI data)
 BIOS-e820: 00000000bd708000 - 00000000bd90f000 (reserved)
 BIOS-e820: 00000000bd90f000 - 00000000bd99f000 (ACPI NVS)
 BIOS-e820: 00000000bd99f000 - 00000000bd9ff000 (ACPI data)
 BIOS-e820: 00000000bd9ff000 - 00000000bda00000 (usable)
 BIOS-e820: 00000000bdc00000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
 BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
user-defined physical RAM map:
 user: 0000000000000000 - 000000000009ec00 (usable)
 user: 000000000009ec00 - 00000000000a0000 (reserved)
 user: 00000000000dc000 - 0000000000100000 (reserved)
 user: 0000000000100000 - 00000000bd4a1000 (usable)
 user: 00000000bd4a1000 - 00000000bd4a7000 (reserved)
 user: 00000000bd4a7000 - 00000000bd5b7000 (usable)
 user: 00000000bd5b7000 - 00000000bd60f000 (reserved)
 user: 00000000bd60f000 - 00000000bd6c6000 (usable)
 user: 00000000bd6c6000 - 00000000bd6d1000 (ACPI NVS)
 user: 00000000bd6d1000 - 00000000bd6d4000 (ACPI data)
 user: 00000000bd6d4000 - 00000000bd6d8000 (reserved)
 user: 00000000bd6d8000 - 00000000bd6dc000 (ACPI NVS)
 user: 00000000bd6dc000 - 00000000bd6df000 (reserved)
 user: 00000000bd6df000 - 00000000bd706000 (ACPI NVS)
 user: 00000000bd706000 - 00000000bd708000 (ACPI data)
 user: 00000000bd708000 - 00000000bd90f000 (reserved)
 user: 00000000bd90f000 - 00000000bd99f000 (ACPI NVS)
 user: 00000000bd99f000 - 00000000bd9ff000 (ACPI data)
 user: 00000000bd9ff000 - 00000000bda00000 (usable)
 user: 00000000bdc00000 - 00000000c0000000 (reserved)
 user: 00000000e0000000 - 00000000f0000000 (reserved)
 user: 00000000fec00000 - 00000000fec10000 (reserved)
 user: 00000000fed00000 - 00000000fed00400 (reserved)
 user: 00000000fed10000 - 00000000fed14000 (reserved)
 user: 00000000fed18000 - 00000000fed1a000 (reserved)
 user: 00000000fed1c000 - 00000000fed90000 (reserved)
 user: 00000000fee00000 - 00000000fee01000 (reserved)
 user: 00000000ff800000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0xbda00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-D3FFF write-protect
  D4000-DBFFF uncachable
  DC000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 13C000000 mask FFC000000 uncachable
  1 base 0BE000000 mask FFE000000 uncachable
  2 base 000000000 mask F80000000 write-back
  3 base 080000000 mask FC0000000 write-back
  4 base 100000000 mask FC0000000 write-back
  5 base 0BDE00000 mask FFFE00000 uncachable
  6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000bde00000 - 0000000100000000 (usable) ==> (reserved)
e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000001000 (usable)
 modified: 0000000000001000 - 0000000000006000 (reserved)
 modified: 0000000000006000 - 000000000009ec00 (usable)
 modified: 000000000009ec00 - 00000000000a0000 (reserved)
 modified: 00000000000dc000 - 0000000000100000 (reserved)
 modified: 0000000000100000 - 00000000bd4a1000 (usable)
 modified: 00000000bd4a1000 - 00000000bd4a7000 (reserved)
 modified: 00000000bd4a7000 - 00000000bd5b7000 (usable)
 modified: 00000000bd5b7000 - 00000000bd60f000 (reserved)
 modified: 00000000bd60f000 - 00000000bd6c6000 (usable)
 modified: 00000000bd6c6000 - 00000000bd6d1000 (ACPI NVS)
 modified: 00000000bd6d1000 - 00000000bd6d4000 (ACPI data)
 modified: 00000000bd6d4000 - 00000000bd6d8000 (reserved)
 modified: 00000000bd6d8000 - 00000000bd6dc000 (ACPI NVS)
 modified: 00000000bd6dc000 - 00000000bd6df000 (reserved)
 modified: 00000000bd6df000 - 00000000bd706000 (ACPI NVS)
 modified: 00000000bd706000 - 00000000bd708000 (ACPI data)
 modified: 00000000bd708000 - 00000000bd90f000 (reserved)
 modified: 00000000bd90f000 - 00000000bd99f000 (ACPI NVS)
 modified: 00000000bd99f000 - 00000000bd9ff000 (ACPI data)
 modified: 00000000bd9ff000 - 00000000bda00000 (usable)
 modified: 00000000bdc00000 - 00000000c0000000 (reserved)
 modified: 00000000e0000000 - 00000000f0000000 (reserved)
 modified: 00000000fec00000 - 00000000fec10000 (reserved)
 modified: 00000000fed00000 - 00000000fed00400 (reserved)
 modified: 00000000fed10000 - 00000000fed14000 (reserved)
 modified: 00000000fed18000 - 00000000fed1a000 (reserved)
 modified: 00000000fed1c000 - 00000000fed90000 (reserved)
 modified: 00000000fee00000 - 00000000fee01000 (reserved)
 modified: 00000000ff800000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bda00000
 0000000000 - 00bda00000 page 2M
kernel direct mapping tables up to bda00000 @ 8000-c000
RAMDISK: 37f59000 - 37fefa1d
ACPI: RSDP 00000000000f6450 00024 (v02 LENOVO)
ACPI: XSDT 00000000bd949b7a 0009C (v01 LENOVO TP-7U    00003090  LTP 00000000)
ACPI: FACP 00000000bd949d00 000F4 (v03 LENOVO TP-7U    00003090 LNVO 00000001)
ACPI: DSDT 00000000bd94a10e 0FAC1 (v01 LENOVO TP-7U    00003090 MSFT 03000000)
ACPI: FACS 00000000bd98e000 00040
ACPI: SSDT 00000000bd949eb4 0025A (v01 LENOVO TP-7U    00003090 MSFT 03000000)
ACPI: ECDT 00000000bd959bcf 00052 (v01 LENOVO TP-7U    00003090 LNVO 00000001)
ACPI: APIC 00000000bd959c21 00078 (v01 LENOVO TP-7U    00003090 LNVO 00000001)
ACPI: MCFG 00000000bd959c99 0003C (v01 LENOVO TP-7U    00003090 LNVO 00000001)
ACPI: HPET 00000000bd959cd5 00038 (v01 LENOVO TP-7U    00003090 LNVO 00000001)
ACPI: SLIC 00000000bd959dc2 00176 (v01 LENOVO TP-7U    00003090  LTP 00000000)
ACPI: BOOT 00000000bd959f38 00028 (v01 LENOVO TP-7U    00003090  LTP 00000001)
ACPI: ASF! 00000000bd959f60 000A0 (v16 LENOVO TP-7U    00003090 PTL  00000001)
ACPI: SSDT 00000000bd98d1fa 00568 (v01 LENOVO TP-7U    00003090 INTL 20050513)
ACPI: TCPA 00000000bd707000 00032 (v00                 00000000      00000000)
ACPI: DMAR 00000000bd706000 00120 (v01                00000001      00000000)
ACPI: SSDT 00000000bd6d3000 00655 (v01  PmRef    CpuPm 00003000 INTL 20050624)
ACPI: SSDT 00000000bd6d2000 00274 (v01  PmRef  Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 00000000bd6d1000 00242 (v01  PmRef    ApTst 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
(7 early reservations) ==> bootmem [0000000000 - 00bda00000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 00016837d0]    TEXT DATA BSS ==> [0001000000 - 00016837d0]
  #3 [0037f59000 - 0037fefa1d]          RAMDISK ==> [0037f59000 - 0037fefa1d]
  #4 [000009ec00 - 0000100000]    BIOS reserved ==> [000009ec00 - 0000100000]
  #5 [0001684000 - 000168414c]              BRK ==> [0001684000 - 000168414c]
  #6 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
found SMP MP-table at [ffff8800000f6490] f6490
 [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880001c00000-ffff8800045fffff] on node 0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[6] active PFN ranges
    0: 0x00000000 -> 0x00000001
    0: 0x00000006 -> 0x0000009e
    0: 0x00000100 -> 0x000bd4a1
    0: 0x000bd4a7 -> 0x000bd5b7
    0: 0x000bd60f -> 0x000bd6c6
    0: 0x000bd9ff -> 0x000bda00
On node 0 totalpages: 775682
  DMA zone: 56 pages used for memmap
  DMA zone: 102 pages reserved
  DMA zone: 3835 pages, LIFO batch:0
  DMA32 zone: 10563 pages used for memmap
  DMA32 zone: 761126 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000001000 - 0000000000006000
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
PM: Registered nosave memory: 00000000bd4a1000 - 00000000bd4a7000
PM: Registered nosave memory: 00000000bd5b7000 - 00000000bd60f000
PM: Registered nosave memory: 00000000bd6c6000 - 00000000bd6d1000
PM: Registered nosave memory: 00000000bd6d1000 - 00000000bd6d4000
PM: Registered nosave memory: 00000000bd6d4000 - 00000000bd6d8000
PM: Registered nosave memory: 00000000bd6d8000 - 00000000bd6dc000
PM: Registered nosave memory: 00000000bd6dc000 - 00000000bd6df000
PM: Registered nosave memory: 00000000bd6df000 - 00000000bd706000
PM: Registered nosave memory: 00000000bd706000 - 00000000bd708000
PM: Registered nosave memory: 00000000bd708000 - 00000000bd90f000
PM: Registered nosave memory: 00000000bd90f000 - 00000000bd99f000
PM: Registered nosave memory: 00000000bd99f000 - 00000000bd9ff000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages at ffff8800016a2000, static data 82400 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 764961
Kernel command line: root=/dev/disk/by-uuid/c1bf4cf3-be7d-44ce-a156-49fdd1880b83  resume=/dev/sda2 ro fastboot mem=4G iommu=off acpi_osi="Linux" vga=773 quiet
ACPI: Added _OSI(Linux)
PID hash table entries: 4096 (order: 12, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Memory: 3044912k/3106816k available (3628k kernel code, 4088k absent, 57080k reserved, 1500k data, 484k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
NR_IRQS:768
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2260.987 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4523.38 BogoMIPS (lpj=7536623)
Security Framework initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Counters: Core2 events, Intel PMU driver.
... version:                 2
... bit width:               40
... generic counters:        2
... value mask:              000000ffffffffff
... max period:              000000007fffffff
... fixed-purpose counters:  3
... counter mask:            0000000700000003
ACPI: Core revision 20090521
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz stepping 06
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4523.39 BogoMIPS (lpj=7536635)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 6 MCE banks
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (9047.78 BogoMIPS).
CPU0 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 0 1
CPU1 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 1 0
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - e3ffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: BIOS _OSI(Linux) query honored via cmdline
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: Power Resource [PUBS] (on)
ACPI: ACPI Dock Station Driver: 3 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0xf4400000-0xf47fffff]
pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
pci 0000:00:02.1: reg 10 64bit mmio: [0xf4200000-0xf42fffff]
pci 0000:00:03.0: reg 10 64bit mmio: [0xfc226800-0xfc22680f]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:19.0: reg 10 32bit mmio: [0xfc000000-0xfc01ffff]
pci 0000:00:19.0: reg 14 32bit mmio: [0xfc025000-0xfc025fff]
pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1a.2: reg 20 io port: [0x18a0-0x18bf]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc226c00-0xfc226fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc020000-0xfc023fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x18c0-0x18df]
pci 0000:00:1d.1: reg 20 io port: [0x18e0-0x18ff]
pci 0000:00:1d.2: reg 20 io port: [0x1c00-0x1c1f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc227000-0xfc2273ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x1c48-0x1c4f]
pci 0000:00:1f.2: reg 14 io port: [0x183c-0x183f]
pci 0000:00:1f.2: reg 18 io port: [0x1c40-0x1c47]
pci 0000:00:1f.2: reg 1c io port: [0x1838-0x183b]
pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc226000-0xfc2267ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xfc227400-0xfc2274ff]
pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f]
pci 0000:03:00.0: reg 10 64bit mmio: [0xf4300000-0xf4301fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: bridge 32bit mmio: [0xf4300000-0xf43fffff]
pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf4000000-0xf40fffff]
pci 0000:00:1c.4: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xfa000000-0xfbffffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf4100000-0xf41fffff]
pci 0000:15:00.0: reg 10 32bit mmio: [0xf4800000-0xf4800fff]
pci 0000:15:00.0: supports D1 D2
pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.0: PME# disabled
pci 0000:15:00.1: reg 10 32bit mmio: [0xf4801000-0xf48017ff]
pci 0000:15:00.1: supports D1 D2
pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.1: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0x4000-0x7fff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xf4800000-0xf7ffffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf0000000-0xf3ffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff has been reserved
system 00:00: iomem range 0xc4000-0xc7fff has been reserved
system 00:00: iomem range 0xc8000-0xcbfff has been reserved
system 00:00: iomem range 0xcc000-0xcffff has been reserved
system 00:00: iomem range 0xd0000-0xd3fff has been reserved
system 00:00: iomem range 0xdc000-0xdffff could not be reserved
system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
system 00:00: iomem range 0xe8000-0xebfff could not be reserved
system 00:00: iomem range 0xec000-0xeffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0xbfffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11ff has been reserved
system 00:02: ioport range 0x800-0x80f has been reserved
system 00:02: ioport range 0x15e0-0x15ef has been reserved
system 00:02: ioport range 0x1600-0x167f has been reserved
system 00:02: ioport range 0x1680-0x169f has been reserved
system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:02: iomem range 0xfed10000-0xfed13fff has been reserved
system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
system 00:02: iomem range 0xfed40000-0xfed44fff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: disabled
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1:   IO window: disabled
pci 0000:00:1c.1:   MEM window: 0xf4300000-0xf43fffff
pci 0000:00:1c.1:   PREFETCH window: disabled
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.3:   IO window: 0x2000-0x2fff
pci 0000:00:1c.3:   MEM window: 0xf8000000-0xf9ffffff
pci 0000:00:1c.3:   PREFETCH window: 0x000000f4000000-0x000000f40fffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
pci 0000:00:1c.4:   IO window: 0x3000-0x3fff
pci 0000:00:1c.4:   MEM window: 0xfa000000-0xfbffffff
pci 0000:00:1c.4:   PREFETCH window: 0x000000f4100000-0x000000f41fffff
pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
pci 0000:15:00.0:   IO window: 0x004000-0x0040ff
pci 0000:15:00.0:   IO window: 0x004400-0x0044ff
pci 0000:15:00.0:   PREFETCH window: 0xf0000000-0xf3ffffff
pci 0000:15:00.0:   MEM window: 0xc0000000-0xc3ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
pci 0000:00:1e.0:   IO window: 0x4000-0x7fff
pci 0000:00:1e.0:   MEM window: 0xf4800000-0xf7ffffff
pci 0000:00:1e.0:   PREFETCH window: 0x000000f0000000-0x000000f3ffffff
pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:03: resource 1 mem: [0xf4300000-0xf43fffff]
pci_bus 0000:05: resource 0 io:  [0x2000-0x2fff]
pci_bus 0000:05: resource 1 mem: [0xf8000000-0xf9ffffff]
pci_bus 0000:05: resource 2 pref mem [0xf4000000-0xf40fffff]
pci_bus 0000:0d: resource 0 io:  [0x3000-0x3fff]
pci_bus 0000:0d: resource 1 mem: [0xfa000000-0xfbffffff]
pci_bus 0000:0d: resource 2 pref mem [0xf4100000-0xf41fffff]
pci_bus 0000:15: resource 0 io:  [0x4000-0x7fff]
pci_bus 0000:15: resource 1 mem: [0xf4800000-0xf7ffffff]
pci_bus 0000:15: resource 2 pref mem [0xf0000000-0xf3ffffff]
pci_bus 0000:15: resource 3 io:  [0x00-0xffff]
pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:16: resource 0 io:  [0x4000-0x40ff]
pci_bus 0000:16: resource 1 io:  [0x4400-0x44ff]
pci_bus 0000:16: resource 2 pref mem [0xf0000000-0xf3ffffff]
pci_bus 0000:16: resource 3 mem: [0xc0000000-0xc3ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 602k freed
Simple Boot Flag at 0x35 set to 0x1
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1257448860.319:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 5949
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.4: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.4: setting latency timer to 64
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004100000, using 1536k, total 32704k
vesafb: mode is 1024x768x8, linelength=1024, pages=41
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 484k freed
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226100 irq 28
ata2: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226180 irq 28
ata3: DUMMY
ata4: DUMMY
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ATA-8: ST9160827AS, 3.CMF, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: configured for UDMA/100
ata1.00: configured for UDMA/100
ata1: EH complete
scsi 0:0:0:0: Direct-Access     ATA      ST9160827AS      3.CM PQ: 0 ANSI: 5
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd e3/00:10:00:00:00:a0 succeeded
ata2.00: ACPI cmd e3/00:03:00:00:00:a0 succeeded
ata2.00: ATAPI: MATSHITADVD-RAM UJ862A, SB04, max UDMA/33
ata2.00: ACPI cmd e3/00:10:00:00:00:a0 succeeded
ata2.00: ACPI cmd e3/00:03:00:00:00:a0 succeeded
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ862A   SB04 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
PM: Starting manual resume from disk
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: sda1: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 1075310
ext3_orphan_cleanup: deleting unreferenced inode 1075309
EXT3-fs: sda1: 2 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with writeback data mode.
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
udev: starting version 146
Non-volatile memory driver v1.3
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (40 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [THM1] (37 C)
ACPI: SSDT 00000000bd6d6c20 002C8 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 00000000bd6d4020 0087A (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
ACPI: SSDT 00000000bd6d5ca0 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
ACPI: SSDT 00000000bd6d5f20 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SLPB]
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ACPI: WMI: Mapper loaded
input: PC Speaker as /devices/platform/pcspkr/input/input5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
agpgart-intel 0000:00:00.0: detected 32764K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
heci: module is from the staging directory, the quality is unknown, you have been warned.
heci: Intel(R) Management Engine Interface - version 5.0.0.31
heci: Copyright (c) 2003 - 2008 Intel Corporation.
heci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
heci 0000:00:03.0: setting latency timer to 64
heci: link layer has been established.
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
thinkpad_acpi: ThinkPad ACPI Extras v0.23
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 7UET79WW (3.09 ), EC 7VHT14WW-1.03
thinkpad_acpi: Lenovo ThinkPad T400, model 7417TPU
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
Registered led device: tpacpi::thinkvantage
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
input: ThinkPad Extra Buttons as /devices/virtual/input/input6
cfg80211: Calling CRDA to update world regulatory domain
heci driver initialization successful.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
iTCO_vendor_support: vendor-support=0
yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
uhci_hcd: USB Universal Host Controller Interface driver
Clocksource tsc unstable (delta = -286513298 ns)
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:25:96:85:c5
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008ff-0ff
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc226c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc227000
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
yenta_cardbus 0000:15:00.0: Socket status: 30000006
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x7fff
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4800000 - 0xf7ffffff
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf3ffffff
ohci1394 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[f4801000-f48017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
usb 4-1: new full speed USB device using uhci_hcd and address 2
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hwardware performance
vboxdrv: counter framework which can generate NMIs is active. You have to prevent
vboxdrv: the usage of hardware performance counters by
vboxdrv:   echo 2 > /proc/sys/kernel/perf_counter_paranoid
vboxdrv: Found 2 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa030e880
vboxdrv: fAsync=0 offMin=0x1a9 offMax=0x1746
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.0.8 (interface 0x000e0000).
usb 4-1: configuration #1 chosen from 1 choice
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:03:00.0: irq 30 for MSI/MSI-X
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: setting latency timer to 64
phy0: Selected rate control algorithm 'iwl-agn-rs'
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
scsi4 : vhba
thinkpad_ec: thinkpad_ec 0.40 loaded.
tp_smapi 0.40 loading...
tp_smapi successfully loaded (smapi_port=0xb2).
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00016c00006c9d25]
EXT3 FS on sda1, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with writeback data mode.

Miitch · 2009-11-05 21:05:49

Well the problem is not the internet connection. But my whole laptop just freezes and my caps lock led goes blinking... But apparently it is because of my wireless driver or the kernel..

mmre · 2010-01-10 19:13:19

It seems like the driver is fixed:
https://bugs.launchpad.net/ubuntu/+sour … omments/80

Last edited by mmre (2010-01-10 19:19:35)

mmre · 2010-01-11 10:20:52

The latest driver still doesn't work properly. Damn chipset!

Arch Linux

#26 2009-11-05 20:43:35

Re: T400 realtek wifi fails after short use, given IOMMU errors in dmesg

#27 2009-11-05 20:53:12

Re: T400 realtek wifi fails after short use, given IOMMU errors in dmesg

#28 2009-11-05 21:05:49

Re: T400 realtek wifi fails after short use, given IOMMU errors in dmesg

#29 2010-01-10 19:13:19

Re: T400 realtek wifi fails after short use, given IOMMU errors in dmesg

#30 2010-01-11 10:20:52

Re: T400 realtek wifi fails after short use, given IOMMU errors in dmesg

Board footer