Arch Linux

ozzolo

Member

From: italy

Registered: 2010-02-03

Posts: 19

eeePc control (pipe menu)

Here is a simple pipe menu script to control some eeePc features:
cpu governors\frequence (cpufreq-utils)
bluetooth, touchpad, webcam and card reader (acpi-eeepc-generic).
tested on an eeePc 1000H.

## ozzolo's eee-control pipe menu for Openbox 
## v 0.2
## tested on Asus eeePC 1000H
##
## 1) copy the script in ~/.config/openbox/pipemenus/eee-control.sh
## 2) change permissions: "chmod +x ~/.config/openbox/pipemenus/eee-control.sh"
## 3) edit   ~/.config/openbox/menu.xml  
##      add  <menu execute="~/.config/openbox/pipemenus/eee-control.sh" id="eee-control" label="eee control"/>
## 4) edit /etc/sudoers: "sudo EDITOR=nano visudo"
##      add <your_username> ALL=NOPASSWD: /usr/bin/cpufreq-set, /etc/acpi/eeepc/
##
echo "<openbox_pipe_menu>"
CPUmodel=$(cat /proc/cpuinfo | grep -m 1 "model name" | sed 's/.*: \|  \|(R)\|(TM)//g')
EEEPCmodel=$(cat /etc/conf.d/acpi-eeepc-generic.conf | grep -m 1 "EEEPC_MODEL" | sed 's/.*=\|"//g')
echo "<separator label=\"Asus EEEPC $EEEPCmodel $CPUmodel\"/>"

# CPU - cpufreq-utils #
CPU0gov=$(cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor)
CPU1gov=$(cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor)
availGOV=$(cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors)
availFREQ=$(cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies)
CPUfreq=$(cat /proc/cpuinfo | grep -m 2 "cpu MHz" | sed 's/.*: \|.000//g')
echo "<menu id=\"eeecontrol-cpu\" label=\"CPU: $CPU0gov/$CPU1gov - $CPUfreq Mhz\">"
i=1
for xgov in $availGOV
do 
    if [ $xgov = "userspace" ]
    then
        j=1
        for xfreq in $availFREQ
        do
            xfreq=`expr $xfreq / 1000`
            echo "<item label=\"set: $xgov $xfreq Mhz\"><action name=\"Execute\"><execute>sudo cpufreq-set -c 0 -f $xfreq</execute></action><action name=\"Execute\"><execute>sudo cpufreq-set -c 1 -f $xfreq</execute></action></item>"
            let "j+=1"
        done
    else
        echo "<item label=\"set: $xgov\"><action name=\"Execute\"><execute>sudo cpufreq-set -c 0 -g $xgov</execute></action><action name=\"Execute\"><execute>sudo cpufreq-set -c 1 -g $xgov</execute></action></item>"
        let "i+=1"
    fi
done
echo "</menu>"
# CPU end #

# ACPI - acpi-eeepc-generic #
statesDIR=/var/eeepc/states
scriptsDIR=/etc/acpi/eeepc
TPstate=$(cat $statesDIR/touchpad | sed 's/0/Off/' | sed 's/1/On/')
echo "<item label=\"toggle Touchpad (now $TPstate) \"><action name=\"Execute\"><execute>sudo $scriptsDIR/acpi-eeepc-generic-toggle-touchpad.sh</execute></action></item>"
BTstate=$(cat $statesDIR/bluetooth | sed 's/0/Off/' | sed 's/1/On/')
echo "<item label=\"toggle Bluetooth (now $BTstate) \"><action name=\"Execute\"><execute>sudo $scriptsDIR/acpi-eeepc-generic-toggle-bluetooth.sh</execute></action></item>"
CAMstate=$(cat $statesDIR/camera | sed 's/0/Off/' | sed 's/1/On/')
echo "<item label=\"toggle Webcam (now $CAMstate) \"><action name=\"Execute\"><execute>sudo $scriptsDIR/acpi-eeepc-generic-toggle-webcam.sh</execute></action></item>"
CARDstate=$(cat $statesDIR/cardr | sed 's/0/Off/' | sed 's/1/On/')
echo "<item label=\"toggle Card Reader (now $CARDstate) \"><action name=\"Execute\"><execute>sudo $scriptsDIR/acpi-eeepc-generic-toggle-cardr.sh</execute></action></item>"
# ACPI end #
echo "</openbox_pipe_menu>"

---

EeePC 1000H blk, 1gb ram. ArchLinux (+Openbox)