Arch Linux

Carlwill

Member

From: Orlando, FL

Registered: 2008-10-06

Posts: 560

Website

Brasero Unable To Burn Tar Files

I just installed Brasero for a GUI CD burning application. I downloaded a Arch ISO and created a Arch install disk fine. No problems. I now have to burn a 3.3GB tarball to DVD. When I attempt to burn the tarball to a fresk DVD, I get an error right when it starts to record.

I select "Create Data Project" & select my tarball file. When I add it, I get a message that say:

"Do you really want to add "fcs_email.tar.gz" to the selection and use the third version of ISO9660 standard to support it?

The size of the file is over 2 GiB. Files larger than 2 GiB are not supported by ISO9660 standard in its first and second versions (the most widespread ones).
It is recommended to use the third version of ISO9660 standard which is supported by most of the operating systems including Linux and all versions of Windows ©.
However MacOS X cannot read images created with version 3 of ISO9660 standard."

I select 'Add File' and the begin the burn process and it fails.

Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1848)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_set_output_size_for_current_track
BraseroBurnURI stopping
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_session_output_size
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_current_track
BraseroBurnURI no burn:// URI found
BraseroBurnURI stopping
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_set_output_size_for_current_track
BraseroLocalTrack stopping
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_session_output_size
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_current_track
BraseroLocalTrack no remote URIs
BraseroLocalTrack stopping
BraseroChecksumFiles called brasero_job_get_output_type
BraseroChecksumFiles called brasero_job_get_current_track
BraseroChecksumFiles called brasero_job_get_action
BraseroChecksumFiles called brasero_job_get_action
BraseroChecksumFiles called brasero_job_set_output_size_for_current_track
BraseroChecksumFiles stopping
BraseroChecksumFiles called brasero_job_get_output_type
BraseroChecksumFiles called brasero_job_get_current_track
BraseroChecksumFiles called brasero_job_get_action
BraseroChecksumFiles called brasero_job_get_session_output_size
BraseroChecksumFiles called brasero_job_get_action
BraseroChecksumFiles called brasero_job_get_action
BraseroChecksumFiles called brasero_job_get_current_track
BraseroChecksumFiles called brasero_job_get_current_track
BraseroChecksumFiles called brasero_job_set_current_action
BraseroChecksumFiles called brasero_job_get_flags
BraseroChecksumFiles called brasero_job_get_action
BraseroChecksumFiles called brasero_job_get_current_track
BraseroChecksumFiles Adding graft for checksum file /.checksum.md5 file:///tmp/brasero_tmp_TE6F7U.md5
BraseroChecksumFiles called brasero_job_add_track
BraseroChecksumFiles called brasero_job_get_action
BraseroChecksumFiles Finished track successfully
BraseroChecksumFiles stopping
BraseroChecksumImage called brasero_job_get_current_track
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_flags
BraseroWodim called brasero_job_get_action
BraseroWodim creating input
BraseroWodim getting varg
BraseroWodim called brasero_job_get_action
BraseroWodim got varg:
BraseroWodim deactivating
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage creating input
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_fd_in
BraseroChecksumImage deactivating
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage getting varg
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage called brasero_job_get_current_track
BraseroGenisoimage called brasero_job_get_tmp_dir
BraseroGenisoimage called brasero_job_get_data_label
BraseroGenisoimage called brasero_job_get_flags
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage called brasero_job_set_current_action
BraseroGenisoimage got varg:
    /usr/bin/genisoimage
    -input-charset
    utf8
    -r
    -J
    -iso-level
    3
    -allow-limited-size
    -udf
    -graft-points
    -path-list
    /tmp/brasero_tmp_KLJA7U
    -exclude-list
    /tmp/brasero_tmp_GRJA7U
    -V
    FCS
    -A
    Brasero-2.28.3
    -sysid
    LINUX
    -quiet
    -print-size
BraseroGenisoimage Launching command
BraseroGenisoimage called brasero_job_get_fd_out
BraseroGenisoimage stdout: 1755046
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage called brasero_job_set_output_size_for_current_track
BraseroGenisoimage stderr: HUP
BraseroGenisoimage stdout: HUP
BraseroGenisoimage process finished with status 0
BraseroGenisoimage called brasero_job_get_fd_out
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage Finished track successfully
BraseroGenisoimage got killed
BraseroGenisoimage stopping
BraseroChecksumImage called brasero_job_get_current_track
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_flags
BraseroWodim called brasero_job_get_action
BraseroWodim creating input
BraseroWodim getting varg
BraseroWodim called brasero_job_get_action
BraseroWodim called brasero_job_get_device
BraseroWodim called brasero_job_get_flags
BraseroWodim called brasero_job_get_speed
BraseroWodim called brasero_job_get_flags
BraseroWodim called brasero_job_get_input_type
BraseroWodim called brasero_job_get_fd_in
BraseroWodim called brasero_job_get_input_type
BraseroWodim called brasero_job_get_session_output_size
BraseroWodim called brasero_job_set_current_action
BraseroWodim got varg:
    wodim
    -v
    dev=/dev/sr0
    speed=16
    driveropts=burnfree
    fs=32m
    tsize=1755046s
    -data
    -nopad
    -
BraseroWodim Launching command
BraseroWodim called brasero_job_get_fd_out
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage linked to BraseroWodim
BraseroChecksumImage creating input
BraseroChecksumImage called brasero_job_get_action
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage linked to BraseroChecksumImage
BraseroChecksumImage called brasero_job_get_action
BraseroGenisoimage getting varg
BraseroChecksumImage called brasero_job_get_current_track
BraseroChecksumImage called brasero_job_get_input_type
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage called brasero_job_get_current_track
BraseroChecksumImage called brasero_job_set_current_action
BraseroChecksumImage called brasero_job_get_fd_in
BraseroChecksumImage Starting checksum generation live (size = 0)
BraseroChecksumImage called brasero_job_set_nonblocking
BraseroGenisoimage called brasero_job_get_tmp_dir
BraseroChecksumImage called brasero_job_get_fd_in
BraseroChecksumImage called brasero_job_get_fd_out
BraseroChecksumImage called brasero_job_get_fd_in
BraseroChecksumImage called brasero_job_get_fd_out
BraseroGenisoimage called brasero_job_get_data_label
BraseroGenisoimage called brasero_job_get_flags
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage called brasero_job_get_fd_out
BraseroGenisoimage called brasero_job_set_current_action
BraseroGenisoimage got varg:
    /usr/bin/genisoimage
    -input-charset
    utf8
    -r
    -J
    -iso-level
    3
    -allow-limited-size
    -udf
    -graft-points
    -path-list
    /tmp/brasero_tmp_223N7U
    -exclude-list
    /tmp/brasero_tmp_883N7U
    -V
    FCS
    -A
    Brasero-2.28.3
    -sysid
    LINUX
BraseroGenisoimage Launching command
BraseroGenisoimage called brasero_job_get_fd_out
BraseroWodim stderr: wodim: No write mode specified.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: Assuming -tao mode.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: Future versions of wodim may have different drive dependent defaults.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: Resource temporarily unavailable. Cannot get mmap for 33558528 Bytes on /dev/zero.
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: TOC Type: 1 = CD-ROM
BraseroWodim stderr: HUP
BraseroWodim stdout: HUP
BraseroWodim process finished with status 11
BraseroWodim called brasero_job_error
BraseroWodim finished with an error
BraseroWodim asked to stop because of an error
    error        = 0
    message    = "no message"
BraseroGenisoimage stopping
BraseroGenisoimage got killed
BraseroGenisoimage disconnecting BraseroGenisoimage from BraseroChecksumImage
BraseroChecksumImage stopping
BraseroChecksumImage disconnecting BraseroChecksumImage from BraseroWodim
BraseroChecksumImage closing connection for BraseroChecksumImage
BraseroWodim stopping
BraseroWodim got killed
BraseroWodim closing connection for BraseroWodim
Session error : unknown (brasero_burn_record brasero-burn.c:2811)

Can anyone tell me what I am missing or doing wrong?

---

./

lucke

Member

From: Poland

Registered: 2004-11-30

Posts: 4,019

Re: Brasero Unable To Burn Tar Files

What does "ulimit -l" say?

Carlwill

Member

From: Orlando, FL

Registered: 2008-10-06

Posts: 560

Website

Re: Brasero Unable To Burn Tar Files

[cwilliams@tuna ~]$ ulimit -l
40000

?

---

./

lucke

Member

From: Poland

Registered: 2004-11-30

Posts: 4,019

Re: Brasero Unable To Burn Tar Files

The potential solution would be to comment out/remove that memlock line in /etc/security/limits.conf and reboot. Then "ulimit -l" should show unlimited. It should solve the "Cannot raise RLIMIT_MEMLOCK limits." warning - but I'm not sure if it actually has any effect on the actual mmap error.

Are you a part of the optical group?

jnjackins

Member

From: Calgary, Alberta

Registered: 2009-12-05

Posts: 9

Website

Re: Brasero Unable To Burn Tar Files

I'm getting this when I try to burn an audio cd. I am part of the optical group. When I commented out the memlock line in limits.conf and rebooted, the 40000 changed to 64 rather that unlimited.