You are not logged in.
I'm not sure if this issue is prematurely posted or not but I thought I'd maybe try and warn anyone else who needs to needs to upgrade their system from having the same thing happen to them.
I upgraded my i686 1000h Laptop this evening with pacman -Syu (of course). The first system upgrade failed with a lot of corrupted packages. I deleted all the packages it prompted me about and let it run again. This time many packages failed to update due to file (?) errors, see below. I commented out my first mirror in /etc/pacman.d/mirrorlist, mirrors.kernel.org, and tried to re-install the packages that failed. Several were corrupted, and some still gave warnings. I rebooted the system to discover that the kernel had been lost in this exchange and that I cannot boot (Grub comes up)
Therefore:
1) What can I learn from this experience / What did I do wrong?
2) Is it likely that the mirror had something wrong with it, or should I check out the harddrive?
3) Is there anything I can do to save this or should I just reformat? (only if the save is very easy)
Here is the transcript from the update that failed. I included my attempt to install git in this transcript because even after installing git, I could not use git (Command Not Found):
sudo pacman -Sy git
Password:
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
warning: git-1.7.0-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): git-1.7.0-1
Total Download Size: 0.00 MB
Total Installed Size: 12.17 MB
Proceed with installation? [Y/n] n
[scj7t4@HELPeR dr-spin]$ cd ..
[scj7t4@HELPeR Programming]$ git clone git://projects.archlinux.org/pacman.git pacman
-bash: git: command not found
[scj7t4@HELPeR Programming]$ sudo pacman -S base-devel
base-devel package not found, searching for group...
:: group base-devel (including ignored packages):
autoconf automake bin86 bison ed fakeroot flex gcc libtool m4
make patch pkgconfig
:: Install whole content? [Y/n] y
warning: autoconf-2.65-1 is up to date -- reinstalling
warning: automake-1.11.1-1 is up to date -- reinstalling
warning: bin86-0.16.17-4 is up to date -- reinstalling
warning: bison-2.4.1-1 is up to date -- reinstalling
warning: ed-1.4-1 is up to date -- reinstalling
warning: fakeroot-1.14.4-1 is up to date -- reinstalling
warning: flex-2.5.35-3 is up to date -- reinstalling
warning: gcc-4.4.3-1 is up to date -- reinstalling
warning: libtool-2.2.6b-2 is up to date -- reinstalling
warning: m4-1.4.13-1 is up to date -- reinstalling
warning: make-3.81-4 is up to date -- reinstalling
warning: patch-2.6.1-1 is up to date -- reinstalling
warning: pkgconfig-0.23-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (13): m4-1.4.13-1 autoconf-2.65-1 automake-1.11.1-1 bin86-0.16.17-4
bison-2.4.1-1 ed-1.4-1 fakeroot-1.14.4-1 flex-2.5.35-3
gcc-4.4.3-1 libtool-2.2.6b-2 make-3.81-4 patch-2.6.1-1
pkgconfig-0.23-1
Total Download Size: 0.00 MB
Total Installed Size: 52.12 MB
Proceed with installation? [Y/n] n
[scj7t4@HELPeR Programming]$ sudo pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
:: Replace klibc with core/mkinitcpio? [Y/n] y
:: Replace klibc-extras with core/mkinitcpio? [Y/n] y
:: Replace klibc-kbd with core/mkinitcpio? [Y/n] y
:: Replace klibc-module-init-tools with core/mkinitcpio? [Y/n] y
:: Replace klibc-udev with core/mkinitcpio? [Y/n] y
resolving dependencies...
looking for inter-conflicts...
Remove (5): klibc-1.5.15-3 klibc-extras-2.5-4 klibc-kbd-1.15.20080312-10
klibc-module-init-tools-3.8-1 klibc-udev-141-3
Total Removed Size: 16.11 MB
Targets (39): device-mapper-2.02.60-3 cryptsetup-1.1.0-2 curl-7.20.0-1
diffutils-2.9-1 filesystem-2010.02-3 freetype2-2.3.12-1
fuse-2.8.3-1 gstreamer0.10-0.10.26-1 udev-151-3
gstreamer0.10-base-0.10.26-1 shared-mime-info-0.71-1
gtk2-2.18.7-1 kernel26-firmware-2.6.32.8-1
mkinitcpio-busybox-1.15.3-5 mkinitcpio-0.6.2-1
kernel26-2.6.32.8-1 libdrm-2.4.18-1 libid3tag-0.15.1b-4
libjpeg-8-2 librsync-0.9.7-5 lvm2-2.02.60-3 mdadm-3.1.1-2
nano-2.2.3-1 wpa_supplicant-0.6.10-1 netcfg-2.5.2-1
openbox-3.4.11-1 perl-crypt-ssleay-0.57-3
perl-xyne-common-2010.02.11.1-1 perl-xyne-arch-2010.02.18.1-1
pixman-0.16.6-1 ppp-2.4.5-1 rdiff-backup-1.2.8-2
rp-pppoe-3.10-4 subversion-1.6.9-2 sudo-1.7.2p3-1
tzdata-2010b-1 vi-050325-2 xf86-video-intel-2.10.0-1
xorg-server-1.7.5-1
Total Download Size: 62.76 MB
Total Installed Size: 199.12 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
device-mapper-2.02.... 777.1K 175.6K/s 00:00:04 [#####################] 100%
cryptsetup-1.1.0-2-i686 613.5K 140.7K/s 00:00:04 [#####################] 100%
diffutils-2.9-1-i686 353.5K 97.3K/s 00:00:04 [#####################] 100%
filesystem-2010.02-... 12.7K 34.9K/s 00:00:00 [#####################] 100%
udev-151-3-i686 355.5K 126.6K/s 00:00:03 [#####################] 100%
kernel26-firmware-2... 1044.0K 119.2K/s 00:00:09 [#####################] 100%
mkinitcpio-busybox-... 159.1K 75.5K/s 00:00:02 [#####################] 100%
mkinitcpio-0.6.2-1-any 19.1K 36.0K/s 00:00:01 [#####################] 100%
kernel26-2.6.32.8-1... 28.6M 132.4K/s 00:03:41 [#####################] 100%
lvm2-2.02.60-3-i686 1641.7K 130.9K/s 00:00:13 [#####################] 100%
mdadm-3.1.1-2-i686 330.5K 76.6K/s 00:00:04 [#####################] 100%
nano-2.2.3-1-i686 465.6K 78.5K/s 00:00:06 [#####################] 100%
wpa_supplicant-0.6.... 224.7K 89.1K/s 00:00:03 [#####################] 100%
netcfg-2.5.2-1-any 18.5K 62.9K/s 00:00:00 [#####################] 100%
ppp-2.4.5-1-i686 301.7K 58.8K/s 00:00:05 [#####################] 100%
rp-pppoe-3.10-4-i686 93.9K 87.5K/s 00:00:01 [#####################] 100%
sudo-1.7.2p3-1-i686 135.7K 38.2K/s 00:00:04 [#####################] 100%
tzdata-2010b-1-i686 565.9K 91.8K/s 00:00:06 [#####################] 100%
vi-050325-2-i686 135.4K 59.9K/s 00:00:02 [#####################] 100%
:: Retrieving packages from extra...
curl-7.20.0-1-i686 569.8K 64.4K/s 00:00:09 [#####################] 100%
freetype2-2.3.12-1-i686 763.0K 93.9K/s 00:00:08 [#####################] 100%
fuse-2.8.3-1-i686 168.0K 86.4K/s 00:00:02 [#####################] 100%
gstreamer0.10-0.10.... 2.4M 132.1K/s 00:00:19 [#####################] 100%
gstreamer0.10-base-... 1544.3K 104.5K/s 00:00:15 [#####################] 100%
shared-mime-info-0.... 637.0K 91.7K/s 00:00:07 [#####################] 100%
gtk2-2.18.7-1-i686 8.9M 105.0K/s 00:01:27 [#####################] 100%
libdrm-2.4.18-1-i686 167.0K 75.4K/s 00:00:02 [#####################] 100%
libid3tag-0.15.1b-4... 72.8K 39.6K/s 00:00:02 [#####################] 100%
libjpeg-8-2-i686 301.6K 60.5K/s 00:00:05 [#####################] 100%
openbox-3.4.11-1-i686 361.4K 70.8K/s 00:00:05 [#####################] 100%
perl-crypt-ssleay-0... 38.7K 45.1K/s 00:00:01 [#####################] 100%
pixman-0.16.6-1-i686 161.3K 61.2K/s 00:00:03 [#####################] 100%
subversion-1.6.9-2-i686 6.4M 94.5K/s 00:01:10 [#####################] 100%
xf86-video-intel-2.... 219.8K 89.1K/s 00:00:02 [#####################] 100%
xorg-server-1.7.5-1... 3.8M 191.1K/s 00:00:20 [#####################] 100%
:: Retrieving packages from community...
librsync-0.9.7-5-i686 56.5K 119.2K/s 00:00:00 [#####################] 100%
perl-xyne-common-20... 37.8K 118.9K/s 00:00:00 [#####################] 100%
perl-xyne-arch-2010... 97.7K 116.0K/s 00:00:01 [#####################] 100%
rdiff-backup-1.2.8-... 552.6K 187.2K/s 00:00:03 [#####################] 100%
checking package integrity...
:: File cryptsetup-1.1.0-2-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File diffutils-2.9-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File filesystem-2010.02-3-any.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File freetype2-2.3.12-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File fuse-2.8.3-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File gstreamer0.10-0.10.26-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File gstreamer0.10-base-0.10.26-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File shared-mime-info-0.71-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File gtk2-2.18.7-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File kernel26-firmware-2.6.32.8-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File mkinitcpio-busybox-1.15.3-5-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File mkinitcpio-0.6.2-1-any.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File kernel26-2.6.32.8-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File libdrm-2.4.18-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File libid3tag-0.15.1b-4-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File libjpeg-8-2-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File lvm2-2.02.60-3-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File mdadm-3.1.1-2-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File nano-2.2.3-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File wpa_supplicant-0.6.10-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File netcfg-2.5.2-1-any.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File openbox-3.4.11-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File perl-crypt-ssleay-0.57-3-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File perl-xyne-common-2010.02.11.1-1-any.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File perl-xyne-arch-2010.02.18.1-1-any.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File pixman-0.16.6-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File ppp-2.4.5-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File rdiff-backup-1.2.8-2-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File rp-pppoe-3.10-4-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File subversion-1.6.9-2-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File sudo-1.7.2p3-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File tzdata-2010b-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File vi-050325-2-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
:: File xf86-video-intel-2.10.0-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
y
y:: File xorg-server-1.7.5-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] error: failed to commit transaction (invalid or corrupted package)
cryptsetup-1.1.0-2-i686.pkg.tar.gz is invalid or corrupted
diffutils-2.9-1-i686.pkg.tar.gz is invalid or corrupted
filesystem-2010.02-3-any.pkg.tar.gz is invalid or corrupted
freetype2-2.3.12-1-i686.pkg.tar.gz is invalid or corrupted
fuse-2.8.3-1-i686.pkg.tar.gz is invalid or corrupted
gstreamer0.10-0.10.26-1-i686.pkg.tar.gz is invalid or corrupted
gstreamer0.10-base-0.10.26-1-i686.pkg.tar.gz is invalid or corrupted
shared-mime-info-0.71-1-i686.pkg.tar.gz is invalid or corrupted
gtk2-2.18.7-1-i686.pkg.tar.gz is invalid or corrupted
kernel26-firmware-2.6.32.8-1-i686.pkg.tar.gz is invalid or corrupted
mkinitcpio-busybox-1.15.3-5-i686.pkg.tar.gz is invalid or corrupted
mkinitcpio-0.6.2-1-any.pkg.tar.gz is invalid or corrupted
kernel26-2.6.32.8-1-i686.pkg.tar.gz is invalid or corrupted
libdrm-2.4.18-1-i686.pkg.tar.gz is invalid or corrupted
libid3tag-0.15.1b-4-i686.pkg.tar.gz is invalid or corrupted
libjpeg-8-2-i686.pkg.tar.gz is invalid or corrupted
lvm2-2.02.60-3-i686.pkg.tar.gz is invalid or corrupted
mdadm-3.1.1-2-i686.pkg.tar.gz is invalid or corrupted
nano-2.2.3-1-i686.pkg.tar.gz is invalid or corrupted
wpa_supplicant-0.6.10-1-i686.pkg.tar.gz is invalid or corrupted
netcfg-2.5.2-1-any.pkg.tar.gz is invalid or corrupted
openbox-3.4.11-1-i686.pkg.tar.gz is invalid or corrupted
perl-crypt-ssleay-0.57-3-i686.pkg.tar.gz is invalid or corrupted
perl-xyne-common-2010.02.11.1-1-any.pkg.tar.gz is invalid or corrupted
perl-xyne-arch-2010.02.18.1-1-any.pkg.tar.gz is invalid or corrupted
pixman-0.16.6-1-i686.pkg.tar.gz is invalid or corrupted
ppp-2.4.5-1-i686.pkg.tar.gz is invalid or corrupted
rdiff-backup-1.2.8-2-i686.pkg.tar.gz is invalid or corrupted
rp-pppoe-3.10-4-i686.pkg.tar.gz is invalid or corrupted
subversion-1.6.9-2-i686.pkg.tar.gz is invalid or corrupted
sudo-1.7.2p3-1-i686.pkg.tar.gz is invalid or corrupted
tzdata-2010b-1-i686.pkg.tar.gz is invalid or corrupted
vi-050325-2-i686.pkg.tar.gz is invalid or corrupted
xf86-video-intel-2.10.0-1-i686.pkg.tar.gz is invalid or corrupted
xorg-server-1.7.5-1-i686.pkg.tar.gz is invalid or corrupted
Errors occurred, no packages were upgraded.
[scj7t4@HELPeR Programming]$ y
-bash: y: command not found
[scj7t4@HELPeR Programming]$ sudo pacman -Syu
Password:
Sorry, try again.
Password:
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
:: Replace klibc with core/mkinitcpio? [Y/n] y
:: Replace klibc-extras with core/mkinitcpio? [Y/n] y
:: Replace klibc-kbd with core/mkinitcpio? [Y/n] y
:: Replace klibc-module-init-tools with core/mkinitcpio? [Y/n] y
:: Replace klibc-udev with core/mkinitcpio? [Y/n] y
resolving dependencies...
looking for inter-conflicts...
Remove (5): klibc-1.5.15-3 klibc-extras-2.5-4 klibc-kbd-1.15.20080312-10
klibc-module-init-tools-3.8-1 klibc-udev-141-3
Total Removed Size: 16.11 MB
Targets (39): device-mapper-2.02.60-3 cryptsetup-1.1.0-2 curl-7.20.0-1
diffutils-2.9-1 filesystem-2010.02-3 freetype2-2.3.12-1
fuse-2.8.3-1 gstreamer0.10-0.10.26-1 udev-151-3
gstreamer0.10-base-0.10.26-1 shared-mime-info-0.71-1
gtk2-2.18.7-1 kernel26-firmware-2.6.32.8-1
mkinitcpio-busybox-1.15.3-5 mkinitcpio-0.6.2-1
kernel26-2.6.32.8-1 libdrm-2.4.18-1 libid3tag-0.15.1b-4
libjpeg-8-2 librsync-0.9.7-5 lvm2-2.02.60-3 mdadm-3.1.1-2
nano-2.2.3-1 wpa_supplicant-0.6.10-1 netcfg-2.5.2-1
openbox-3.4.11-1 perl-crypt-ssleay-0.57-3
perl-xyne-common-2010.02.11.1-1 perl-xyne-arch-2010.02.18.1-1
pixman-0.16.6-1 ppp-2.4.5-1 rdiff-backup-1.2.8-2
rp-pppoe-3.10-4 subversion-1.6.9-2 sudo-1.7.2p3-1
tzdata-2010b-1 vi-050325-2 xf86-video-intel-2.10.0-1
xorg-server-1.7.5-1
Total Download Size: 61.05 MB
Total Installed Size: 199.12 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
cryptsetup-1.1.0-2-i686 613.5K 395.6K/s 00:00:02 [#####################] 100%
diffutils-2.9-1-i686 353.5K 191.4K/s 00:00:02 [#####################] 100%
filesystem-2010.02-... 12.7K 101.3K/s 00:00:00 [#####################] 100%
kernel26-firmware-2... 1044.0K 380.3K/s 00:00:03 [#####################] 100%
mkinitcpio-busybox-... 159.1K 206.2K/s 00:00:01 [#####################] 100%
mkinitcpio-0.6.2-1-any 19.1K 91.2K/s 00:00:00 [#####################] 100%
kernel26-2.6.32.8-1... 28.6M 411.1K/s 00:01:11 [#####################] 100%
lvm2-2.02.60-3-i686 1641.7K 275.8K/s 00:00:06 [#####################] 100%
mdadm-3.1.1-2-i686 330.5K 185.9K/s 00:00:02 [#####################] 100%
nano-2.2.3-1-i686 465.6K 121.9K/s 00:00:04 [#####################] 100%
wpa_supplicant-0.6.... 224.7K 126.2K/s 00:00:02 [#####################] 100%
netcfg-2.5.2-1-any 18.5K 89.7K/s 00:00:00 [#####################] 100%
ppp-2.4.5-1-i686 301.7K 185.4K/s 00:00:02 [#####################] 100%
rp-pppoe-3.10-4-i686 93.9K 50.0K/s 00:00:02 [#####################] 100%
sudo-1.7.2p3-1-i686 135.7K 62.9K/s 00:00:02 [#####################] 100%
tzdata-2010b-1-i686 565.9K 119.7K/s 00:00:05 [#####################] 100%
vi-050325-2-i686 135.4K 82.3K/s 00:00:02 [#####################] 100%
:: Retrieving packages from extra...
freetype2-2.3.12-1-i686 763.0K 130.8K/s 00:00:06 [#####################] 100%
fuse-2.8.3-1-i686 168.0K 163.4K/s 00:00:01 [#####################] 100%
gstreamer0.10-0.10.... 2.4M 250.1K/s 00:00:10 [#####################] 100%
gstreamer0.10-base-... 1544.3K 296.3K/s 00:00:05 [#####################] 100%
shared-mime-info-0.... 637.0K 192.0K/s 00:00:03 [#####################] 100%
gtk2-2.18.7-1-i686 8.9M 276.1K/s 00:00:33 [#####################] 100%
libdrm-2.4.18-1-i686 167.0K 158.0K/s 00:00:01 [#####################] 100%
libid3tag-0.15.1b-4... 72.8K 155.9K/s 00:00:00 [#####################] 100%
libjpeg-8-2-i686 301.6K 215.9K/s 00:00:01 [#####################] 100%
openbox-3.4.11-1-i686 361.4K 170.1K/s 00:00:02 [#####################] 100%
perl-crypt-ssleay-0... 38.7K 111.6K/s 00:00:00 [#####################] 100%
pixman-0.16.6-1-i686 161.3K 171.9K/s 00:00:01 [#####################] 100%
subversion-1.6.9-2-i686 6.4M 303.1K/s 00:00:22 [#####################] 100%
xf86-video-intel-2.... 219.8K 174.8K/s 00:00:01 [#####################] 100%
xorg-server-1.7.5-1... 3.8M 297.1K/s 00:00:13 [#####################] 100%
:: Retrieving packages from community...
perl-xyne-common-20... 37.8K 118.3K/s 00:00:00 [#####################] 100%
perl-xyne-arch-2010... 97.7K 164.6K/s 00:00:01 [#####################] 100%
rdiff-backup-1.2.8-... 552.6K 256.6K/s 00:00:02 [#####################] 100%
checking package integrity...
(39/39) checking for file conflicts [#####################] 100%
(1/5) removing klibc-udev [#####################] 100%
(2/5) removing klibc-module-init-tools [#####################] 100%
(3/5) removing klibc-kbd [#####################] 100%
(4/5) removing klibc-extras [#####################] 100%
(5/5) removing klibc [#####################] 100%
( 1/39) upgrading device-mapper [#####################] 100%
( 2/39) upgrading cryptsetup [#####################] 100%
( 3/39) upgrading curl [#####################] 100%
( 4/39) upgrading diffutils [#####################] 100%
( 5/39) upgrading filesystem [#####################] 100%
warning: /etc/ld.so.conf installed as /etc/ld.so.conf.pacnew
( 6/39) upgrading freetype2 [#####################] 100%
( 7/39) upgrading fuse [#####################] 100%
( 8/39) upgrading gstreamer0.10 [#####################] 100%
( 9/39) upgrading udev [#####################] 100%
error: could not extract sbin/dmeventd.static ((Empty error message))
error: problem occurred while upgrading udev
(10/39) upgrading gstreamer0.10-base [#####################] 100%
(11/39) upgrading shared-mime-info [#####################] 100%
(12/39) upgrading gtk2 [#####################] 100%
(13/39) upgrading kernel26-firmware [#####################] 100%
(14/39) installing mkinitcpio-busybox [#####################] 100%
(15/39) upgrading mkinitcpio [#####################] 100%
New optional dependencies for mkinitcpio
mkinitcpio-nfs-utils: Support for root filesystem on NFS
(16/39) upgrading kernel26 [#####################] 100%
(17/39) upgrading libdrm [#####################] 100%
error: could not extract usr/share/mime/packages/freedesktop.org.xml ((Empty error message))
error: problem occurred while upgrading libdrm
(18/39) upgrading libid3tag [#####################] 100%
error: could not extract usr/share/mime/packages/freedesktop.org.xml ((Empty error message))
error: problem occurred while upgrading libid3tag
(19/39) upgrading libjpeg [#####################] 100%
error: could not extract usr/share/locale/lv/LC_MESSAGES/shared-mime-info.mo ((Empty error message))
error: problem occurred while upgrading libjpeg
(20/39) upgrading librsync [#####################] 100%
(21/39) upgrading lvm2 [#####################] 100%
(22/39) upgrading mdadm [#####################] 100%
error: could not extract usr/share/locale/el/LC_MESSAGES/shared-mime-info.mo ((Empty error message))
error: problem occurred while upgrading mdadm
(23/39) upgrading nano [#####################] 100%
error: could not extract usr/share/locale/pt_BR/LC_MESSAGES/shared-mime-info.mo ((Empty error message))
error: problem occurred while upgrading nano
(24/39) upgrading wpa_supplicant [#####################] 100%
error: could not extract usr/share/locale/eo/LC_MESSAGES/shared-mime-info.mo ((Empty error message))
error: problem occurred while upgrading wpa_supplicant
(25/39) upgrading netcfg [#####################] 100%
error: could not extract usr/share/mime/packages/freedesktop.org.xml ((Empty error message))
error: problem occurred while upgrading netcfg
New optional dependencies for netcfg
wpa_actiond: Required for automatic wireless connection with
rc.d/net-auto-wireless
ifplugd: Required for automatic wired connection with rc.d/net-auto-wired
(26/39) upgrading openbox [#####################] 100%
error: could not extract usr/share/locale/sq/LC_MESSAGES/shared-mime-info.mo ((Empty error message))
error: problem occurred while upgrading openbox
(27/39) upgrading perl-crypt-ssleay [#####################] 100%
error: could not extract usr/share/mime/packages/freedesktop.org.xml ((Empty error message))
error: problem occurred while upgrading perl-crypt-ssleay
(28/39) upgrading perl-xyne-common [#####################] 100%
error: could not extract usr/share/mime/packages/freedesktop.org.xml ((Empty error message))
error: problem occurred while upgrading perl-xyne-common
(29/39) upgrading perl-xyne-arch [#####################] 100%
error: could not extract usr/share/mime/packages/freedesktop.org.xml ((Empty error message))
error: problem occurred while upgrading perl-xyne-arch
(30/39) upgrading pixman [#####################] 100%
error: could not extract usr/share/mime/packages/freedesktop.org.xml ((Empty error message))
error: problem occurred while upgrading pixman
(31/39) upgrading ppp [#####################] 100%
error: could not extract usr/share/locale/lv/LC_MESSAGES/shared-mime-info.mo ((Empty error message))
error: problem occurred while upgrading ppp
(32/39) upgrading rdiff-backup [#####################] 100%
error: could not extract usr/share/locale/en_GB/LC_MESSAGES/shared-mime-info.mo ((Empty error message))
error: problem occurred while upgrading rdiff-backup
(33/39) upgrading rp-pppoe [#####################] 100%
error: could not extract usr/share/mime/packages/freedesktop.org.xml ((Empty error message))
error: problem occurred while upgrading rp-pppoe
(34/39) upgrading subversion [#####################] 100%
(35/39) upgrading sudo [#####################] 100%
error: could not extract usr/share/mime/packages/freedesktop.org.xml ((Empty error message))
error: problem occurred while upgrading sudo
(36/39) upgrading tzdata [#####################] 100%
error: could not extract usr/share/locale/en_GB/LC_MESSAGES/shared-mime-info.mo ((Empty error message))
error: problem occurred while upgrading tzdata
(37/39) upgrading vi [#####################] 100%
error: could not extract usr/share/mime/packages/freedesktop.org.xml ((Empty error message))
error: problem occurred while upgrading vi
(38/39) upgrading xf86-video-intel [#####################] 100%
error: could not extract usr/share/locale/eo/LC_MESSAGES/shared-mime-info.mo ((Empty error message))
error: problem occurred while upgrading xf86-video-intel
(39/39) upgrading xorg-server [#####################] 100%
[scj7t4@HELPeR Programming]$ ls
dr-spin dr-spin-2-17-10.zip trunk_2010-02-18-D
[scj7t4@HELPeR Programming]$ sudo reboot
-bash: /usr/bin/sudo: No such file or directory
[scj7t4@HELPeR Programming]$ su root
Password:
[root@HELPeR Programming]# pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
local database is up to dateHere is what I did to try and save the system:
[scj7t4@HELPeR ~]$ su root
Password:
[root@HELPeR scj7t4]# reflector -l 6 -r
Can't locate Xyne/Arch/Reflector.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.10.1 /usr/share/perl5/site_perl/5.10.1 /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl /usr/lib/perl5/current /usr/lib/perl5/site_perl/current .) at /usr/bin/reflector line 25.
BEGIN failed--compilation aborted at /usr/bin/reflector line 25.
[root@HELPeR scj7t4]# pacman -Sy udev
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
warning: udev-151-3 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): udev-151-3
Total Download Size: 0.00 MB
Total Installed Size: 1.57 MB
Proceed with installation? [Y/n] n
[root@HELPeR scj7t4]# nano /etc/pacman.conf
bash: nano: command not found
[root@HELPeR scj7t4]# pacman -Sy udev
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
warning: udev-151-3 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): udev-151-3
Total Download Size: 0.00 MB
Total Installed Size: 1.57 MB
Proceed with installation? [Y/n] y
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading udev [#####################] 100%
warning: /etc/modprobe.d/framebuffer_blacklist.conf installed as /etc/modprobe.d/framebuffer_blacklist.conf.pacnew
[root@HELPeR scj7t4]# ls
bauerbill-0.1.1-1-any.pkg.tar.gz fstab project
credentials Programming Remote
[root@HELPeR scj7t4]# pacman -Sy nano
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
warning: nano-2.2.3-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): nano-2.2.3-1
Total Download Size: 0.00 MB
Total Installed Size: 1.46 MB
Proceed with installation? [Y/n] y
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading nano [#####################] 100%
[root@HELPeR scj7t4]# nano /etc/pacman.d/mirrorlist
[root@HELPeR scj7t4]# pacman -Sy udev
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
warning: udev-151-3 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): udev-151-3
Total Download Size: 0.00 MB
Total Installed Size: 1.57 MB
Proceed with installation? [Y/n] y
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading udev [#####################] 100%
[root@HELPeR scj7t4]# pacman -S libdrm
warning: libdrm-2.4.18-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): libdrm-2.4.18-1
Total Download Size: 0.00 MB
Total Installed Size: 0.96 MB
Proceed with installation? [Y/n] y
checking package integrity...
:: File libdrm-2.4.18-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
error: failed to commit transaction (invalid or corrupted package)
libdrm-2.4.18-1-i686.pkg.tar.gz is invalid or corrupted
Errors occurred, no packages were upgraded.
[root@HELPeR scj7t4]# pacman -S libdrm
warning: libdrm-2.4.18-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): libdrm-2.4.18-1
Total Download Size: 0.16 MB
Total Installed Size: 0.96 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from extra...
libdrm-2.4.18-1-i686 167.0K 90.1K/s 00:00:02 [#####################] 100%
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading libdrm [#####################] 100%
[root@HELPeR scj7t4]# pacman -S libid3tag
warning: libid3tag-0.15.1b-4 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): libid3tag-0.15.1b-4
Total Download Size: 0.00 MB
Total Installed Size: 0.21 MB
Proceed with installation? [Y/n] y
checking package integrity...
:: File libid3tag-0.15.1b-4-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] n
error: failed to commit transaction (invalid or corrupted package)
libid3tag-0.15.1b-4-i686.pkg.tar.gz is invalid or corrupted
Errors occurred, no packages were upgraded.
[root@HELPeR scj7t4]# pacman -S libid3tag
warning: libid3tag-0.15.1b-4 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): libid3tag-0.15.1b-4
Total Download Size: 0.00 MB
Total Installed Size: 0.21 MB
Proceed with installation? [Y/n] y
checking package integrity...
:: File libid3tag-0.15.1b-4-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
error: failed to commit transaction (invalid or corrupted package)
libid3tag-0.15.1b-4-i686.pkg.tar.gz is invalid or corrupted
Errors occurred, no packages were upgraded.
[root@HELPeR scj7t4]# pacman -S libid3tag
warning: libid3tag-0.15.1b-4 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): libid3tag-0.15.1b-4
Total Download Size: 0.07 MB
Total Installed Size: 0.21 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from extra...
libid3tag-0.15.1b-4... 72.8K 54.0K/s 00:00:01 [#####################] 100%
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading libid3tag [#####################] 100%
[root@HELPeR scj7t4]# pacman -S libjpeg
warning: libjpeg-8-2 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): libjpeg-8-2
Total Download Size: 0.00 MB
Total Installed Size: 0.73 MB
Proceed with installation? [Y/n] y
checking package integrity...
:: File libjpeg-8-2-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] n
error: failed to commit transaction (invalid or corrupted package)
libjpeg-8-2-i686.pkg.tar.gz is invalid or corrupted
Errors occurred, no packages were upgraded.
[root@HELPeR scj7t4]# pacman -S libjpeg
warning: libjpeg-8-2 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): libjpeg-8-2
Total Download Size: 0.00 MB
Total Installed Size: 0.73 MB
Proceed with installation? [Y/n] y
checking package integrity...
:: File libjpeg-8-2-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
error: failed to commit transaction (invalid or corrupted package)
libjpeg-8-2-i686.pkg.tar.gz is invalid or corrupted
Errors occurred, no packages were upgraded.
[root@HELPeR scj7t4]# pacman -S libjpeg
warning: libjpeg-8-2 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): libjpeg-8-2
Total Download Size: 0.29 MB
Total Installed Size: 0.73 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from extra...
libjpeg-8-2-i686 301.6K 167.0K/s 00:00:02 [#####################] 100%
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading libjpeg [#####################] 100%
[root@HELPeR scj7t4]# pacman -S libjpeg
warning: libjpeg-8-2 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): libjpeg-8-2
Total Download Size: 0.00 MB
Total Installed Size: 0.73 MB
Proceed with installation? [Y/n] y
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading libjpeg [#####################] 100%
[root@HELPeR scj7t4]# pacman -S libjpeg
warning: libjpeg-8-2 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): libjpeg-8-2
Total Download Size: 0.00 MB
Total Installed Size: 0.73 MB
Proceed with installation? [Y/n] y
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading libjpeg [#####################] 100%
[root@HELPeR scj7t4]# pacman -S mdadm
warning: mdadm-3.1.1-2 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): mdadm-3.1.1-2
Total Download Size: 0.00 MB
Total Installed Size: 0.84 MB
Proceed with installation? [Y/n] y
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading mdadm [#####################] 100%
[root@HELPeR scj7t4]# pacman -S wpa_supplicant
warning: wpa_supplicant-0.6.10-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): wpa_supplicant-0.6.10-1
Total Download Size: 0.00 MB
Total Installed Size: 0.56 MB
Proceed with installation? [Y/n] y
checking package integrity...
:: File wpa_supplicant-0.6.10-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
error: failed to commit transaction (invalid or corrupted package)
wpa_supplicant-0.6.10-1-i686.pkg.tar.gz is invalid or corrupted
Errors occurred, no packages were upgraded.
[root@HELPeR scj7t4]# pacman -S wpa_supplicant
warning: wpa_supplicant-0.6.10-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): wpa_supplicant-0.6.10-1
Total Download Size: 0.22 MB
Total Installed Size: 0.56 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
wpa_supplicant-0.6.... 224.7K 114.6K/s 00:00:02 [#####################] 100%
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading wpa_supplicant [#####################] 100%
warning: /etc/wpa_supplicant.conf installed as /etc/wpa_supplicant.conf.pacnew
[root@HELPeR scj7t4]# pacman -S wpa_supplicant
warning: wpa_supplicant-0.6.10-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): wpa_supplicant-0.6.10-1
Total Download Size: 0.00 MB
Total Installed Size: 0.56 MB
Proceed with installation? [Y/n] y
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading wpa_supplicant [#####################] 100%
[root@HELPeR scj7t4]# pacman -S wpa_supplicant
warning: wpa_supplicant-0.6.10-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): wpa_supplicant-0.6.10-1
Total Download Size: 0.00 MB
Total Installed Size: 0.56 MB
Proceed with installation? [Y/n] y
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading wpa_supplicant [#####################] 100%
[root@HELPeR scj7t4]# pacman -S netcfg
warning: netcfg-2.5.2-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): netcfg-2.5.2-1
Total Download Size: 0.00 MB
Total Installed Size: 0.26 MB
Proceed with installation? [Y/n] y
checking package integrity...
:: File netcfg-2.5.2-1-any.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
error: failed to commit transaction (invalid or corrupted package)
netcfg-2.5.2-1-any.pkg.tar.gz is invalid or corrupted
Errors occurred, no packages were upgraded.
[root@HELPeR scj7t4]# pacman -S netcfg
warning: netcfg-2.5.2-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): netcfg-2.5.2-1
Total Download Size: 0.02 MB
Total Installed Size: 0.26 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
netcfg-2.5.2-1-any 18.5K 52.2K/s 00:00:00 [#####################] 100%
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading netcfg [#####################] 100%
[root@HELPeR scj7t4]# pacman -S openbox
warning: openbox-3.4.11-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): openbox-3.4.11-1
Total Download Size: 0.00 MB
Total Installed Size: 1.88 MB
Proceed with installation? [Y/n] y
checking package integrity...
:: File openbox-3.4.11-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
error: failed to commit transaction (invalid or corrupted package)
openbox-3.4.11-1-i686.pkg.tar.gz is invalid or corrupted
Errors occurred, no packages were upgraded.
[root@HELPeR scj7t4]# pacman -S openbox
warning: openbox-3.4.11-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): openbox-3.4.11-1
Total Download Size: 0.35 MB
Total Installed Size: 1.88 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from extra...
openbox-3.4.11-1-i686 361.4K 73.7K/s 00:00:05 [#####################] 100%
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading openbox [#####################] 100%
[root@HELPeR scj7t4]# pacman -S perl-crypt-ssleay
warning: perl-crypt-ssleay-0.57-3 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): perl-crypt-ssleay-0.57-3
Total Download Size: 0.00 MB
Total Installed Size: 0.11 MB
Proceed with installation? [Y/n] y
checking package integrity...
:: File perl-crypt-ssleay-0.57-3-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
error: failed to commit transaction (invalid or corrupted package)
perl-crypt-ssleay-0.57-3-i686.pkg.tar.gz is invalid or corrupted
Errors occurred, no packages were upgraded.
[root@HELPeR scj7t4]# pacman -S perl-crypt-ssleay
warning: perl-crypt-ssleay-0.57-3 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): perl-crypt-ssleay-0.57-3
Total Download Size: 0.04 MB
Total Installed Size: 0.11 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from extra...
perl-crypt-ssleay-0... 38.7K 51.6K/s 00:00:01 [#####################] 100%
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading perl-crypt-ssleay [#####################] 100%
[root@HELPeR scj7t4]# pacman -S perl-xyne-common
warning: perl-xyne-common-2010.02.11.1-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): perl-xyne-common-2010.02.11.1-1
Total Download Size: 0.00 MB
Total Installed Size: 0.12 MB
Proceed with installation? [Y/n] y
checking package integrity...
:: File perl-xyne-common-2010.02.11.1-1-any.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
error: failed to commit transaction (invalid or corrupted package)
perl-xyne-common-2010.02.11.1-1-any.pkg.tar.gz is invalid or corrupted
Errors occurred, no packages were upgraded.
[root@HELPeR scj7t4]# pacman -S perl-xyne-common
warning: perl-xyne-common-2010.02.11.1-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): perl-xyne-common-2010.02.11.1-1
Total Download Size: 0.04 MB
Total Installed Size: 0.12 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from community...
perl-xyne-common-20... 37.8K 49.2K/s 00:00:01 [#####################] 100%
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading perl-xyne-common [#####################] 100%
[root@HELPeR scj7t4]# pacman -S perl-xyne-arch
warning: perl-xyne-arch-2010.02.18.1-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): perl-xyne-arch-2010.02.18.1-1
Total Download Size: 0.00 MB
Total Installed Size: 0.37 MB
Proceed with installation? [Y/n] y
checking package integrity...
:: File perl-xyne-arch-2010.02.18.1-1-any.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
error: failed to commit transaction (invalid or corrupted package)
perl-xyne-arch-2010.02.18.1-1-any.pkg.tar.gz is invalid or corrupted
Errors occurred, no packages were upgraded.
[root@HELPeR scj7t4]# pacman -S perl-xyne-arch
warning: perl-xyne-arch-2010.02.18.1-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): perl-xyne-arch-2010.02.18.1-1
Total Download Size: 0.10 MB
Total Installed Size: 0.37 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from community...
perl-xyne-arch-2010... 97.7K 71.1K/s 00:00:01 [#####################] 100%
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading perl-xyne-arch [#####################] 100%
[root@HELPeR scj7t4]# pacman -S pixman
warning: pixman-0.16.6-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): pixman-0.16.6-1
Total Download Size: 0.00 MB
Total Installed Size: 0.46 MB
Proceed with installation? [Y/n] y
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading pixman [#####################] 100%
[root@HELPeR scj7t4]# pacman -S ppp
warning: ppp-2.4.5-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): ppp-2.4.5-1
Total Download Size: 0.00 MB
Total Installed Size: 0.84 MB
Proceed with installation? [Y/n] y
checking package integrity...
:: File ppp-2.4.5-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
error: failed to commit transaction (invalid or corrupted package)
ppp-2.4.5-1-i686.pkg.tar.gz is invalid or corrupted
Errors occurred, no packages were upgraded.
[root@HELPeR scj7t4]# pacman -S ppp
warning: ppp-2.4.5-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): ppp-2.4.5-1
Total Download Size: 0.29 MB
Total Installed Size: 0.84 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
ppp-2.4.5-1-i686 301.7K 146.0K/s 00:00:02 [#####################] 100%
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading ppp [#####################] 100%
[root@HELPeR scj7t4]# pacman -Sy rdiff-backup
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
warning: rdiff-backup-1.2.8-2 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): rdiff-backup-1.2.8-2
Total Download Size: 0.00 MB
Total Installed Size: 1.90 MB
Proceed with installation? [Y/n] y
checking package integrity...
:: File rdiff-backup-1.2.8-2-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
error: failed to commit transaction (invalid or corrupted package)
rdiff-backup-1.2.8-2-i686.pkg.tar.gz is invalid or corrupted
Errors occurred, no packages were upgraded.
[root@HELPeR scj7t4]# pacman -Sy rdiff-backup
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
warning: rdiff-backup-1.2.8-2 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): rdiff-backup-1.2.8-2
Total Download Size: 0.54 MB
Total Installed Size: 1.90 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from community...
rdiff-backup-1.2.8-... 552.6K 144.4K/s 00:00:04 [#####################] 100%
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading rdiff-backup [#####################] 100%
[root@HELPeR scj7t4]# pacman -Sy rp-pppoe
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
warning: rp-pppoe-3.10-4 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): rp-pppoe-3.10-4
Total Download Size: 0.00 MB
Total Installed Size: 0.33 MB
Proceed with installation? [Y/n] y
checking package integrity...
:: File rp-pppoe-3.10-4-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
error: failed to commit transaction (invalid or corrupted package)
rp-pppoe-3.10-4-i686.pkg.tar.gz is invalid or corrupted
Errors occurred, no packages were upgraded.
[root@HELPeR scj7t4]# pacman -Sy rp-pppoe
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
warning: rp-pppoe-3.10-4 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): rp-pppoe-3.10-4
Total Download Size: 0.09 MB
Total Installed Size: 0.33 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
rp-pppoe-3.10-4-i686 93.9K 78.8K/s 00:00:01 [#####################] 100%
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading rp-pppoe [#####################] 100%
warning: /etc/ppp/pppoe.conf installed as /etc/ppp/pppoe.conf.pacnew
>>> The kernel-mode plugin has a new place.
>>> It's now located under /usr/lib/rp-pppoe/rp-pppoe.so
>>> Change LINUX_PLUGIN to the new path in your /etc/ppp/pppoe.conf
[root@HELPeR scj7t4]# pacman -Sy rp-pppoe
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
warning: rp-pppoe-3.10-4 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): rp-pppoe-3.10-4
Total Download Size: 0.00 MB
Total Installed Size: 0.33 MB
Proceed with installation? [Y/n] y
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading rp-pppoe [#####################] 100%
>>> The kernel-mode plugin has a new place.
>>> It's now located under /usr/lib/rp-pppoe/rp-pppoe.so
>>> Change LINUX_PLUGIN to the new path in your /etc/ppp/pppoe.conf
[root@HELPeR scj7t4]# pacman -S sudo
warning: sudo-1.7.2p3-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): sudo-1.7.2p3-1
Total Download Size: 0.00 MB
Total Installed Size: 0.33 MB
Proceed with installation? [Y/n] y
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading sudo [#####################] 100%
warning: /etc/sudoers installed as /etc/sudoers.pacnew
[root@HELPeR scj7t4]# pacman -S sudo
warning: sudo-1.7.2p3-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): sudo-1.7.2p3-1
Total Download Size: 0.00 MB
Total Installed Size: 0.33 MB
Proceed with installation? [Y/n] y
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading sudo [#####################] 100%
[root@HELPeR scj7t4]# pacman -S tzdata
warning: tzdata-2010b-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): tzdata-2010b-1
Total Download Size: 0.00 MB
Total Installed Size: 5.41 MB
Proceed with installation? [Y/n] y
checking package integrity...
:: File tzdata-2010b-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] n
error: failed to commit transaction (invalid or corrupted package)
tzdata-2010b-1-i686.pkg.tar.gz is invalid or corrupted
Errors occurred, no packages were upgraded.
[root@HELPeR scj7t4]# pacman -S tzdata
warning: tzdata-2010b-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): tzdata-2010b-1
Total Download Size: 0.00 MB
Total Installed Size: 5.41 MB
Proceed with installation? [Y/n] y
checking package integrity...
:: File tzdata-2010b-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
error: failed to commit transaction (invalid or corrupted package)
tzdata-2010b-1-i686.pkg.tar.gz is invalid or corrupted
Errors occurred, no packages were upgraded.
[root@HELPeR scj7t4]# pacman -S tzdata
warning: tzdata-2010b-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): tzdata-2010b-1
Total Download Size: 0.55 MB
Total Installed Size: 5.41 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
tzdata-2010b-1-i686 565.9K 189.9K/s 00:00:03 [#####################] 100%
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading tzdata [#####################] 100%
[root@HELPeR scj7t4]# pacman -S vi
warning: vi-050325-2 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): vi-050325-2
Total Download Size: 0.00 MB
Total Installed Size: 0.30 MB
Proceed with installation? [Y/n] y
checking package integrity...
:: File vi-050325-2-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] n
error: failed to commit transaction (invalid or corrupted package)
vi-050325-2-i686.pkg.tar.gz is invalid or corrupted
Errors occurred, no packages were upgraded.
[root@HELPeR scj7t4]# pacman -S vi
warning: vi-050325-2 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): vi-050325-2
Total Download Size: 0.00 MB
Total Installed Size: 0.30 MB
Proceed with installation? [Y/n] y
checking package integrity...
:: File vi-050325-2-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
error: failed to commit transaction (invalid or corrupted package)
vi-050325-2-i686.pkg.tar.gz is invalid or corrupted
Errors occurred, no packages were upgraded.
[root@HELPeR scj7t4]# pacman -S vi
warning: vi-050325-2 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): vi-050325-2
Total Download Size: 0.13 MB
Total Installed Size: 0.30 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
vi-050325-2-i686 135.4K 102.4K/s 00:00:01 [#####################] 100%
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading vi [#####################] 100%
[root@HELPeR scj7t4]# pacman -S xf86-video-intel
warning: xf86-video-intel-2.10.0-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): xf86-video-intel-2.10.0-1
Total Download Size: 0.00 MB
Total Installed Size: 0.83 MB
Proceed with installation? [Y/n] y
checking package integrity...
:: File xf86-video-intel-2.10.0-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
error: failed to commit transaction (invalid or corrupted package)
xf86-video-intel-2.10.0-1-i686.pkg.tar.gz is invalid or corrupted
Errors occurred, no packages were upgraded.
[root@HELPeR scj7t4]# pacman -S xf86-video-intel
warning: xf86-video-intel-2.10.0-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): xf86-video-intel-2.10.0-1
Total Download Size: 0.21 MB
Total Installed Size: 0.83 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from extra...
xf86-video-intel-2.... 219.8K 115.9K/s 00:00:02 [#####################] 100%
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading xf86-video-intel [#####################] 100%
[root@HELPeR scj7t4]# pacman -S xorg-server
warning: xorg-server-1.7.5-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): xorg-server-1.7.5-1
Total Download Size: 0.00 MB
Total Installed Size: 9.66 MB
Proceed with installation? [Y/n] y
checking package integrity...
:: File xorg-server-1.7.5-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
error: failed to commit transaction (invalid or corrupted package)
xorg-server-1.7.5-1-i686.pkg.tar.gz is invalid or corrupted
Errors occurred, no packages were upgraded.
[root@HELPeR scj7t4]# pacman -S xorg-server
warning: xorg-server-1.7.5-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): xorg-server-1.7.5-1
Total Download Size: 3.78 MB
Total Installed Size: 9.66 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from extra...
xorg-server-1.7.5-1... 3.8M 250.0K/s 00:00:15 [#####################] 100%
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
(1/1) upgrading xorg-server [#####################] 100%
[root@HELPeR scj7t4]# reflector -l 6 -r
# 2010-02-18 22:06
# generated by reflector
# ranked by rankmirrors
Server = http://mirrors.kernel.org/archlinux/$repo/os/i686
Server = http://mirror.lividpenguin.com/pub/archlinux/$repo/os/i686
Server = http://mirror.selfnet.de/archlinux/$repo/os/i686
Server = http://cesium.di.uminho.pt/pub/archlinux/$repo/os/i686
Server = http://archlinux.puzzle.ch/$repo/os/i686
Server = ftp://archlinux.puzzle.ch/$repo/os/i686
[root@HELPeR scj7t4]# nano /etc/pacman.d/mirrorlist
[root@HELPeR scj7t4]# pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
local database is up to dateWhen I edited /etc/pacman.d/mirrorlist or generated a reflector I commented out mirrors.kernel.org.
Thanks!
Last edited by losl (2010-02-19 04:33:13)
Offline