You are not logged in.

Pages: 1

#1 2010-04-13 05:50:24

Zerp64
Member
Registered: 2010-04-13
Posts: 11

Fresh netinstall won't boot

Kinda sucks, because I like Arch so far.

The first time I installed Arch, everything went fine. I had a good openbox/SLIM configuration, but for some reason I just got a black screen w/ a mouse that didn't move whenever I tried to use the radeon driver (which works with my card, by the way, so that wasn't the problem). By the way, if anyone has a fix for this I'd like to hear it. wink

Anyways, I uninstalled Arch and reinstalled Fedora, but after my second attempt to install Arch (I have nothing better to do), arch suddenly wouldn't boot at all after a netinstall. Doing a core install went fine, but when I tried to update it and reboot, the same thing happened as the netinstall: The screen goes on standby and the CPU is spiked at %100 (I know this because my fan goes to full speed when the CPU jumps up too high - long story). Not even doing that Skinny Elephants trick worked, so I'm guessing it was a complete kernel panic.

So anyways, does anyone have an idea of what's up? I don't exactly know how to check for logs when the system is unbootable, but in retrospect I coulda just booted into a livecd...

Offline

#2 2010-04-13 23:13:52

davidm
Member
Registered: 2009-04-25
Posts: 371

Re: Fresh netinstall won't boot

Is it even starting to load Grub?

Why I support GNU/Linux

Offline

#3 2010-04-15 00:59:39

Zerp64
Member
Registered: 2010-04-13
Posts: 11

Re: Fresh netinstall won't boot

Yeah, it does. For some reason, the screen goes to standby and the system locks up at about the time Udev is loaded.

Come on guys... I don't like Fedora. sad

I just looked in /var/log of a recent Arch install on this computer, and there doesn't seem to be anything there. A file called 'lastlog', but I'm not sure it's anything. I can't open it with gedit or cat.

Last edited by Zerp64 (2010-04-15 01:04:09)

Offline

#4 2010-04-15 02:26:44

Anikom15
Banned
From: United States
Registered: 2009-04-30
Posts: 836
Website

Re: Fresh netinstall won't boot

Are you sure you can't open it with cat? Cat can open anything.

Personally, I'd rather be back in Hobbiton.

Offline

#5 2010-04-15 02:35:50

Zerp64
Member
Registered: 2010-04-13
Posts: 11

Re: Fresh netinstall won't boot

From fedora livecd:

[root@localhost log]# cd '/media/disk/var/log'
[root@localhost log]# ls
btmp  lastlog  old  pacman.log  wtmp
[root@localhost log]# cat lastlog
[root@localhost log]#

=========
Pretty sure it won't open.

Offline

#6 2010-04-15 02:50:03

Anikom15
Banned
From: United States
Registered: 2009-04-30
Posts: 836
Website

Re: Fresh netinstall won't boot

That would mean empty.

Personally, I'd rather be back in Hobbiton.

Offline

#7 2010-04-15 03:06:15

cesura
Package Maintainer (PM)
From: Tallinn, Estonia
Registered: 2010-01-23
Posts: 1,867

Re: Fresh netinstall won't boot

Yeah. If it wouldn't open, cat would be quick to shoot out an error

PGP Key

Offline

#8 2010-04-15 03:27:29

Daemonjax
Member
Registered: 2009-07-02
Posts: 48

Re: Fresh netinstall won't boot

The only times I ever had problems booting with arch kernels was when I put my /boot partition on ext4... Now I just make a seperate /boot partition using ext3, and use nearly all the remaining space for the / partition using ext4... never had another problem after that. 

Have you tried the fallback kernel in your grub menu?

Last edited by Daemonjax (2010-04-15 03:30:22)

Offline

#9 2010-04-15 03:29:29

Zerp64
Member
Registered: 2010-04-13
Posts: 11

Re: Fresh netinstall won't boot

I'm not sure if the file is empty... it says it's about 28kb in size.

And I just used the default options for the boot partition: a seperate ext2 partition.

And I'm not too sure it's my video card. Other distros run just fine. But you may be right, I suppose.

Last edited by Zerp64 (2010-04-15 03:30:24)

Offline

#10 2010-04-15 03:30:56

Zerp64
Member
Registered: 2010-04-13
Posts: 11

Re: Fresh netinstall won't boot

I've tried the fallback, yes. Same problem. It fails when it begins to load udev.

Offline

#11 2010-04-15 03:38:34

Daemonjax
Member
Registered: 2009-07-02
Posts: 48

Re: Fresh netinstall won't boot

Try booting up with a minimum of devices connected... detach usb devices, sound card, video card if possible...  That's all I got.  Best of luck.

Last edited by Daemonjax (2010-04-15 03:38:57)

Offline

#12 2010-04-15 05:47:49

Zerp64
Member
Registered: 2010-04-13
Posts: 11

Re: Fresh netinstall won't boot

Come on, Linerds! Help me out here! I'm dying to use Arch! What other alternatives do I have? Gentoo? I'm not that smart!

Offline

#13 2010-04-15 05:53:38

hokasch
Member
Registered: 2007-09-23
Posts: 1,461

Re: Fresh netinstall won't boot

Not really sure if it is important in your case, but since that is the standard answer for "black screen after udev" (/after last kernel update) and nobody mentioned it yet: Disabled KMS?

Last edited by hokasch (2010-04-15 05:56:20)

Offline

#14 2010-04-16 00:24:17

Zerp64
Member
Registered: 2010-04-13
Posts: 11

Re: Fresh netinstall won't boot

That would reduce/disable 3D support for my Radeon card, wouldn't it? I use the open source radeon driver.

Oh.. hah... I use a radeon card. Could that be a part of the problem?

Offline

#15 2010-04-16 00:52:21

Daemonjax
Member
Registered: 2009-07-02
Posts: 48

Re: Fresh netinstall won't boot

try adding:

nomodeset

to your kernel options in menu.lst

Maybe this thread might help you more if your problem is with KMS:  http://bbs.archlinux.org/viewtopic.php?id=81835

Offline

#16 2010-04-16 00:55:47

hokasch
Member
Registered: 2007-09-23
Posts: 1,461

Re: Fresh netinstall won't boot

Well, look at it that way:
if it gets you through boot, you have a better base to fix 3d support tongue

Offline

#17 2010-04-16 01:29:47

Zerp64
Member
Registered: 2010-04-13
Posts: 11

Re: Fresh netinstall won't boot

hokasch wrote:

Well, look at it that way:
if it gets you through boot, you have a better base to fix 3d support tongue

Damn your Vulcan logic!

Alright, I'll give it a try (that and the nomodeset option).

*Prays he can keep the high-resolution TTY terminals*

Offline

#18 2010-04-16 03:02:48

Zerp64
Member
Registered: 2010-04-13
Posts: 11

Re: Fresh netinstall won't boot

Upside: Arch boots with nomodeset option! Awesome!

Downside: TTY is its ugly, low-resolution self again and Xorg won't run properly with radeon driver. I have to use Vesa, which sucks. When I use the Radeon driver and boot into SLIM, I get a black screen. It still accepts input though because I can input my username and password. Then I get a mouse cursor with a black screen, which isn't exactly what I wanted.

Log:

X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686 
Current Operating System: Linux desktop 2.6.33-ARCH #1 SMP PREEMPT Mon Apr 5 05:57:38 UTC 2010 i686
Kernel command line: root=/dev/disk/by-uuid/d45a3fdf-c3e9-4f79-867d-c578dc6f80ee ro nomodeset
Build Date: 01 April 2010  05:35:33PM
 
Current version of pixman: 0.18.0
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 15 19:53:08 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
(**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:1:0:0) 1002:9495:1092:0028 ATI Technologies Inc RV730 Pro AGP [Radeon HD 4600 Series] rev 0, Mem @ 0xd0000000/268435456, 0xe5000000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
    compiled for 1.7.5.902, module version = 6.12.192
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 6.0
(II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
    ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
    ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
    ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
    ATI FirePro M5750, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
    ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
    ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
    ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
    ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
    ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
    ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
    ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
    ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
    ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
    ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
    ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
    ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4290,
    CYPRESS, ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, CEDAR, CEDAR, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, CEDAR, ATI Radeon HD 5450,
    CEDAR
(II) Primary Device is: PCI 01@00:00:0
(II) [KMS] drm report modesetting isn't supported.
(II) RADEON(0): TOTO SAYS 00000000e5000000
(II) RADEON(0): MMIO registers at 0x00000000e5000000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 0.1.0
    ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon HD 4600 Series" (ChipID = 0x9495)
(--) RADEON(0): Linear framebuffer at 0x00000000d0000000
(II) RADEON(0): AGP card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom: 
    SubsystemVendorID: 0x1092 SubsystemID: 0x0028
    IOBaseAddress: 0xa000
    Filename: 4E1291BD.NA4
    BIOS Bootup Message:  RV730 512MB DDR2 128BIT 600E/400M NTSC                                      
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffec
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffec
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 600000
(II) RADEON(0): Default Memory Clock: 400000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 16000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 6000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.32.0
(==) RADEON(0): Page Flipping disabled on r5xx and newer chips.

(II) RADEON(0): Will not try to use DMA for Xv image transfers
(II) RADEON(0): Detected total video RAM=524288K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling disabled
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=60000 max=120000; xclk=40000
(II) RADEON(0): Output DVI-1 using monitor section Monitor0
(II) RADEON(0): I2C bus "DVI-1" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Port0:
  XRANDR name: DVI-1
  Connector: DVI-I
  CRT2: INTERNAL_KLDSCP_DAC2
  DFP2: INTERNAL_UNIPHY1
  DDC reg: 0x7f10
(II) RADEON(0): Port1:
  XRANDR name: DVI-0
  Connector: DVI-I
  CRT1: INTERNAL_KLDSCP_DAC1
  DFP1: INTERNAL_UNIPHY
  DDC reg: 0x7e20
(II) RADEON(0): I2C device "DVI-1:ddc2" registered at address 0xA0.
Dac detection success
(II) RADEON(0): Output: DVI-1, Detected Monitor Type: 0
Unhandled monitor type 0
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 3
(II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
(II) RADEON(0): Manufacturer: HWP  Model: 2801  Serial#: 16843009
(II) RADEON(0): Year: 2008  Week: 16
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 37  vert.: 23
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.609 redY: 0.339   greenX: 0.304 greenY: 0.594
(II) RADEON(0): blueX: 0.149 blueY: 0.086   whiteX: 0.312 whiteY: 0.328
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1152x864@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): #2: hsize: 1280  vsize 1024  refresh: 75  vid: 36737
(II) RADEON(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 106.5 MHz   Image Size:  370 x 230 mm
(II) RADEON(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0
(II) RADEON(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0
(II) RADEON(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: HP w1707
(II) RADEON(0): Serial No: CNC8160LCR
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff0022f0012801010101
(II) RADEON(0):     10120103802517782a3c409c564d9826
(II) RADEON(0):     165054a56a8081408180818f95000101
(II) RADEON(0):     0101010101019a29a0d0518422305098
(II) RADEON(0):     360072e61000001c000000fd00324c18
(II) RADEON(0):     530e000a202020202020000000fc0048
(II) RADEON(0):     502077313730370a20202020000000ff
(II) RADEON(0):     00434e43383136304c43520a20200007
finished output detect: 1
finished all detect
Dac detection success
(II) RADEON(0): Output: DVI-1, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 3
(II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
(II) RADEON(0): Manufacturer: HWP  Model: 2801  Serial#: 16843009
(II) RADEON(0): Year: 2008  Week: 16
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 37  vert.: 23
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.609 redY: 0.339   greenX: 0.304 greenY: 0.594
(II) RADEON(0): blueX: 0.149 blueY: 0.086   whiteX: 0.312 whiteY: 0.328
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1152x864@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): #2: hsize: 1280  vsize 1024  refresh: 75  vid: 36737
(II) RADEON(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 106.5 MHz   Image Size:  370 x 230 mm
(II) RADEON(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0
(II) RADEON(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0
(II) RADEON(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: HP w1707
(II) RADEON(0): Serial No: CNC8160LCR
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff0022f0012801010101
(II) RADEON(0):     10120103802517782a3c409c564d9826
(II) RADEON(0):     165054a56a8081408180818f95000101
(II) RADEON(0):     0101010101019a29a0d0518422305098
(II) RADEON(0):     360072e61000001c000000fd00324c18
(II) RADEON(0):     530e000a202020202020000000fc0048
(II) RADEON(0):     502077313730370a20202020000000ff
(II) RADEON(0):     00434e43383136304c43520a20200007
(II) RADEON(0): Panel infos found from DDC detailed: 1440x900
(II) RADEON(0): EDID vendor "HWP", prod id 10241
(II) RADEON(0): Output DVI-1 disconnected
(II) RADEON(0): Output DVI-0 connected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output DVI-0 using initial mode 1440x900
(II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Will attempt to use R6xx/R7xx EXA support if DRI is enabled.
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 2.5.0
    ABI class: X.Org Video Driver, version 6.0
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) RADEON(0): RADEONScreenInit d0000000 0 0
Output UNIPHY0 transmitter setup success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success
(II) RADEON(0): Dynamic Power Management Disabled
(==) RADEON(0): Using 24 bit depth buffer
mc fb loc is 00ef00d0
(II) RADEON(0): RADEONInitMemoryMap() : 
(II) RADEON(0):   mem_size         : 0x20000000
(II) RADEON(0):   MC_FB_LOCATION   : 0x00ef00d0
(II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 262144 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00870000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00874000
(II) RADEON(0): Will use 8640 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 8640 kb for back buffer at offset 0x00878000
(II) RADEON(0): Will use 8640 kb for depth buffer at offset 0x010e8000
(II) RADEON(0): Will use 117760 kb for textures at offset 0x01958000
(II) RADEON(0): Will use 118432 kb for X Server offscreen at offset 0x08c58000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xd0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [agp] Mode 0x1f000a0b [AGP 0x1106/0x3205; Card 0x1002/0x9495 0x1092/0x0028]
(II) RADEON(0): [agp] 32768 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xe0000000
(II) RADEON(0): [agp] Ring mapped at 0xb7037000
(II) RADEON(0): [agp] ring read ptr handle = 0xe0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb77b7000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xe0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xa6d97000
(II) RADEON(0): [agp] GART texture map handle = 0xe0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xa5117000
(II) RADEON(0): [drm] register handle = 0x2ca00000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x00ef00d0 0x001f0000
(II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0x00ef00d0 is: 0x00ef00d0
(WW) RADEON(0):   MC_AGP_LOCATION was: 0x003f0000 is: 0x0000f000
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x00ef00d0 0x00ef00d0
(II) RADEON(0):   MC_AGP_LOCATION  : 0x0000f000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Setting EXA maxPitchBytes
(II) EXA(0): Offscreen pixmap area of 121274368 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Set up textured video
Output UNIPHY0 transmitter setup success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success
Output UNIPHY0 transmitter setup success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Mode 1440x900 - 1904 934 6
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x00ef00d0 0x00ef00d0
(II) RADEON(0):   MC_AGP_LOCATION  : 0x0000f000
Picked PLL 0
before 10650
after 10650
best_freq: 106527
best_feedback_div: 217
best_frac_feedback_div: 0
best_ref_div: 5
best_post_div: 11
(II) RADEON(0): crtc(0) Clock: mode 106500, PLL 1065270
(II) RADEON(0): crtc(0) PLL  : refdiv 5, fbdiv 0xD9(217), fracfbdiv 0, pdiv 11
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output UNIPHY0 transmitter setup success
Output DIG0 encoder setup success
Output DIG0 encoder setup success
Output DIG0 encoder setup success
Output UNIPHY0 transmitter setup success
Output UNIPHY0 transmitter setup success
Output UNIPHY0 transmitter setup success
Output UNIPHY0 transmitter setup success
Enable CRTC 0 success
Enable CRTC memreq 0 success
Unblank CRTC 0 success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
Output UNIPHY0 transmitter setup success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Mode 1440x900 - 1904 934 6
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x00ef00d0 0x00ef00d0
(II) RADEON(0):   MC_AGP_LOCATION  : 0x0000f000
Picked PLL 0
before 10650
after 10650
best_freq: 106527
best_feedback_div: 217
best_frac_feedback_div: 0
best_ref_div: 5
best_post_div: 11
(II) RADEON(0): crtc(0) Clock: mode 106500, PLL 1065270
(II) RADEON(0): crtc(0) PLL  : refdiv 5, fbdiv 0xD9(217), fracfbdiv 0, pdiv 11
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output UNIPHY0 transmitter setup success
Output DIG0 encoder setup success
Output DIG0 encoder setup success
Output DIG0 encoder setup success
Output UNIPHY0 transmitter setup success
Output UNIPHY0 transmitter setup success
Output UNIPHY0 transmitter setup success
Output UNIPHY0 transmitter setup success
Enable CRTC 0 success
Enable CRTC memreq 0 success
Unblank CRTC 0 success
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r600_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 380 x 238
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.7.3, module version = 2.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device Microsoft Microsoft® Digital Media Pro Keyboard
(**) Microsoft Microsoft® Digital Media Pro Keyboard: always reports core events
(**) Microsoft Microsoft® Digital Media Pro Keyboard: Device: "/dev/input/event6"
(II) Microsoft Microsoft® Digital Media Pro Keyboard: Found 1 mouse buttons
(II) Microsoft Microsoft® Digital Media Pro Keyboard: Found scroll wheel(s)
(II) Microsoft Microsoft® Digital Media Pro Keyboard: Found relative axes
(II) Microsoft Microsoft® Digital Media Pro Keyboard: Found absolute axes
(II) Microsoft Microsoft® Digital Media Pro Keyboard: Found x and y absolute axes
(II) Microsoft Microsoft® Digital Media Pro Keyboard: Found keys
(II) Microsoft Microsoft® Digital Media Pro Keyboard: Configuring as mouse
(II) Microsoft Microsoft® Digital Media Pro Keyboard: Configuring as keyboard
(**) Microsoft Microsoft® Digital Media Pro Keyboard: YAxisMapping: buttons 4 and 5
(**) Microsoft Microsoft® Digital Media Pro Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Microsoft® Digital Media Pro Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(EE) Microsoft Microsoft® Digital Media Pro Keyboard: failed to initialize for relative axes.
(WW) Device 'Microsoft Microsoft® Digital Media Pro Keyboard' has 37 axes, only using first 36.
(**) Microsoft Microsoft® Digital Media Pro Keyboard: (accel) keeping acceleration scheme 1
(**) Microsoft Microsoft® Digital Media Pro Keyboard: (accel) acceleration profile 0
(II) Microsoft Microsoft® Digital Media Pro Keyboard: initialized for absolute axes.
(II) config/hal: Adding input device Microsoft Microsoft® Digital Media Pro Keyboard
(**) Microsoft Microsoft® Digital Media Pro Keyboard: always reports core events
(**) Microsoft Microsoft® Digital Media Pro Keyboard: Device: "/dev/input/event5"
(II) Microsoft Microsoft® Digital Media Pro Keyboard: Found keys
(II) Microsoft Microsoft® Digital Media Pro Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Microsoft Microsoft® Digital Media Pro Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event4"
(II) Logitech USB-PS/2 Optical Mouse: Found 10 mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
(II) Logitech USB-PS/2 Optical Mouse: Found relative axes
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
(**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
(II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) AIGLX: Suspending AIGLX clients for VT switch
Output UNIPHY0 transmitter setup success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x001f0000 0x00ef00d0
(II) RADEON(0):   MC_AGP_LOCATION  : 0x00000000
(II) RADEON(0): avivo_restore !
Enable CRTC 0 success
Enable CRTC memreq 0 success
Unblank CRTC 0 success
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Logitech USB-PS/2 Optical Mouse: Close
(II) UnloadModule: "evdev"
(II) Microsoft Microsoft® Digital Media Pro Keyboard: Close
(II) UnloadModule: "evdev"
(II) Microsoft Microsoft® Digital Media Pro Keyboard: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) RADEON(0): [drm] removed 1 reserved context for kernel
(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xf801d000 at 0xb77b8000
(II) RADEON(0): [drm] Closed DRM master.

Last edited by Zerp64 (2010-04-16 03:03:34)

Offline

#19 2010-04-16 07:05:55

Daemonjax
Member
Registered: 2009-07-02
Posts: 48

Re: Fresh netinstall won't boot

Which ATI video card do you have exactly? EDIT: NM, RV730 Pro AGP

Try:

radeon.modeset=0

instead of nomodeset, and ignore the error (if any)

After that I'd just think about upgrading that old $50 video card to anything else... But, I bet that might not make sense depending on the rest of your hardware... especially if you're limited to only AGP slots.

Can you get 2d acceleration with vesa drivers?  If so, that isn't the end of the world.  It's not like it was a gaming PC anyways wink 

Does your motherboard have an onboard video card?  If so, try using that... it's probably on par with that agp card.

Last edited by Daemonjax (2010-04-16 07:14:28)

Offline

#20 2010-04-16 17:29:24

Zerp64
Member
Registered: 2010-04-13
Posts: 11

Re: Fresh netinstall won't boot

Ouch! Card bashing! Come on, The card ain't that bad! It's good for mild gaming. Sure my PC won't be running Crysis or anything, but it plays most games rather well. It's the perfect card for poor guys like me. Anyways, I'm not too much of a gamer.

Honestly I still wish I had my Nvidia card. It mighta been using proprietary drivers, but at least they were better supported than this ATI one.

I'll try your solution and post the results here.

Offline

#21 2010-04-19 01:23:41

Zerp64
Member
Registered: 2010-04-13
Posts: 11

Re: Fresh netinstall won't boot

I reinstalled Arch and the same thing happened: the system panics when udev begins to load. After around two hours of work I found that not only was the radeon driver being loaded at bootup by udev, but so was my onboard card. Apparently they conflicted and caused the panic. So blacklisting the internal video card modules worked and I managed to get the system to boot up without disabling KMS.

But I'm still having a problem. I can't start Xorg at all, because doing so causes the system to freeze. Even using the vesa drivers causes this freeze. It's pretty damned annoying. Does anyone have any ideas from here? I have the standard Xorg group installed, along with the ati, mouse, keyboard, and evdev packages. I might be missing something totally obvious... I'll check the wiki, but if you guys have any ideas let me know.

The modules I've blacklisted, by the way, are the via_agp and i2c_viapro modules. I've blacklisted them in both /etc/rc.conf and /etc/mkinitsomethingorother.conf, just to be sure. Could that be causing this?

Edit: Yeah, via_agp is for AGP cards... I got that now. Anyways, that's a part of the problem. Check this out:

Apr 17 21:57:40 desktop kernel: BUG: unable to handle kernel NULL pointer dereference at 00000040
Apr 17 21:57:40 desktop kernel: IP: [<f8ae0c84>] radeon_agp_init+0x14/0x3d0 [radeon]
Apr 17 21:57:40 desktop kernel: *pde = 00000000 
Apr 17 21:57:40 desktop kernel: Oops: 0000 [#1] PREEMPT SMP 
Apr 17 21:57:40 desktop kernel: last sysfs file: /sys/module/snd_timer/initstate
Apr 17 21:57:40 desktop kernel: Modules linked in: snd_seq_oss(+) snd_seq_midi_event snd_seq radeon(+) ttm drm_kms_helper drm snd_pcm_oss snd_mixer_oss agpgart i2c_algo_bit snd_emu10k1(+) snd_rawmidi fan snd_via82xx_modem(+) snd_ac97_codec ac97_bus snd_seq_device snd_util_mem snd_hwdep snd_pcm snd_timer firewire_ohci uhci_hcd snd i2c_viapro emu10k1_gp lp soundcore snd_page_alloc psmouse button thermal processor ppdev firewire_core crc_itu_t shpchp i2c_core ehci_hcd gameport sg usbcore evdev serio_raw via_rhine mii pci_hotplug pcspkr parport_pc parport tpm_tis tpm tpm_bios rtc_cmos rtc_core rtc_lib ext4 mbcache jbd2 crc16 sr_mod sd_mod cdrom sata_via ata_generic pata_acpi pata_via libata scsi_mod
Apr 17 21:57:40 desktop kernel: 
Apr 17 21:57:40 desktop kernel: Pid: 1885, comm: modprobe Not tainted 2.6.33-ARCH #1 Kelut /PP163AA-ABA A800N
Apr 17 21:57:40 desktop kernel: EIP: 0060:[<f8ae0c84>] EFLAGS: 00010286 CPU: 0
Apr 17 21:57:40 desktop kernel: EIP is at radeon_agp_init+0x14/0x3d0 [radeon]
Apr 17 21:57:40 desktop kernel: EAX: f6b92400 EBX: f7025000 ECX: f73d2600 EDX: 00000000
Apr 17 21:57:40 desktop kernel: ESI: 00000000 EDI: 00000024 EBP: f6531d68 ESP: f6531d14
Apr 17 21:57:40 desktop kernel: DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Apr 17 21:57:40 desktop kernel: Process modprobe (pid: 1885, ti=f6530000 task=f67791c0 task.ti=f6530000)
Apr 17 21:57:40 desktop kernel: Stack:
Apr 17 21:57:40 desktop kernel: f8b55794 00000001 f7025000 f6531d3c f8adc5bd f73d2600 00000001 f7025000
Apr 17 21:57:40 desktop kernel: <0> 00000000 f702567c f6531d44 f8aeaf92 f6531d68 f8aeb2f9 00000024 f6531d58
Apr 17 21:57:40 desktop kernel: <0> f8b3aa02 00000282 f7025000 00000000 00000024 f6531d90 f8b2dd65 201a9551
Apr 17 21:57:40 desktop kernel: Call Trace:
Apr 17 21:57:40 desktop kernel: [<f8adc5bd>] ? radeon_debugfs_add_files+0x8d/0xe0 [radeon]
Apr 17 21:57:40 desktop kernel: [<f8aeaf92>] ? radeon_debugfs_fence_init+0x12/0x20 [radeon]
Apr 17 21:57:40 desktop kernel: [<f8aeb2f9>] ? radeon_fence_driver_init+0xc9/0x140 [radeon]
Apr 17 21:57:40 desktop kernel: [<f8b3aa02>] ? radeon_debugfs_pm_init+0x12/0x20 [radeon]
Apr 17 21:57:40 desktop kernel: [<f8b2dd65>] ? rv770_init+0x1e5/0x2d0 [radeon]
Apr 17 21:57:40 desktop kernel: [<c1204de3>] ? vga_client_register+0x63/0x80
Apr 17 21:57:40 desktop kernel: [<f8adcd47>] ? radeon_device_init+0x227/0x2f0 [radeon]
Apr 17 21:57:40 desktop kernel: [<f8adc0f0>] ? radeon_vga_set_decode+0x0/0x20 [radeon]
Apr 17 21:57:40 desktop kernel: [<f8add9d6>] ? radeon_driver_load_kms+0x76/0x1b0 [radeon]
Apr 17 21:57:40 desktop kernel: [<f899c498>] ? drm_get_dev+0x2b8/0x4e0 [drm]
Apr 17 21:57:40 desktop kernel: [<c12d2c7b>] ? mutex_lock+0xb/0x20
Apr 17 21:57:40 desktop kernel: [<f8b3d3e0>] ? radeon_pci_probe+0xd/0x177 [radeon]
Apr 17 21:57:40 desktop kernel: [<c119ac3e>] ? local_pci_probe+0xe/0x10
Apr 17 21:57:40 desktop kernel: [<c119b9b0>] ? pci_device_probe+0x60/0x80
Apr 17 21:57:40 desktop kernel: [<c1210ea7>] ? driver_probe_device+0x77/0x170
Apr 17 21:57:40 desktop kernel: [<c1211019>] ? __driver_attach+0x79/0x80
Apr 17 21:57:40 desktop kernel: [<c12106e8>] ? bus_for_each_dev+0x48/0x70
Apr 17 21:57:40 desktop kernel: [<c1210d49>] ? driver_attach+0x19/0x20
Apr 17 21:57:40 desktop kernel: [<c1210fa0>] ? __driver_attach+0x0/0x80
Apr 17 21:57:40 desktop kernel: [<c120ffef>] ? bus_add_driver+0xbf/0x2c0
Apr 17 21:57:40 desktop kernel: [<c119b8f0>] ? pci_device_remove+0x0/0x40
Apr 17 21:57:40 desktop kernel: [<c12112b5>] ? driver_register+0x65/0x120
Apr 17 21:57:40 desktop kernel: [<c12d2868>] ? mutex_unlock+0x8/0x10
Apr 17 21:57:40 desktop kernel: [<c119bbd0>] ? __pci_register_driver+0x40/0xb0
Apr 17 21:57:40 desktop kernel: [<f89974ab>] ? drm_init+0xeb/0x100 [drm]
Apr 17 21:57:40 desktop kernel: [<f8b650b2>] ? radeon_init+0xb2/0xb4 [radeon]
Apr 17 21:57:40 desktop kernel: [<c100112d>] ? do_one_initcall+0x2d/0x190
Apr 17 21:57:40 desktop kernel: [<f8b65000>] ? radeon_init+0x0/0xb4 [radeon]
Apr 17 21:57:40 desktop kernel: [<c10797a1>] ? sys_init_module+0xb1/0x220
Apr 17 21:57:40 desktop kernel: [<c100389f>] ? sysenter_do_call+0x12/0x28
Apr 17 21:57:40 desktop kernel: Code: 8d b4 26 00 00 00 00 e8 1b c8 eb ff 5d 66 90 c3 8d b4 26 00 00 00 00 55 89 e5 57 56 53 89 c3 83 ec 48 8b 40 04 8b 90 38 02 00 00 <8b> 4a 40 85 c9 75 12 e8 60 c7 eb ff 85 c0 89 c7 0f 85 1d 03 00 
Apr 17 21:57:40 desktop kernel: EIP: [<f8ae0c84>] radeon_agp_init+0x14/0x3d0 [radeon] SS:ESP 0068:f6531d14
Apr 17 21:57:40 desktop kernel: CR2: 0000000000000040
Apr 17 21:57:40 desktop kernel: VIA 82xx Modem 0000:00:11.6: setting latency timer to 64
Apr 17 21:57:40 desktop kernel: usb 1-3: new high speed USB device using ehci_hcd and address 6
Apr 17 21:57:40 desktop kernel: ---[ end trace 784b2a7ade9eb1ea ]---

Looks like: http://permalink.gmane.org/gmane.lin...000.devel/6841  and http://permalink.gmane.org/gmane.com...ri.devel/45181

But maybe I'm just paranoid...

Offline

#22 2010-04-19 09:37:50

mandog
Member
From: Peru
Registered: 2008-09-17
Posts: 218

Re: Fresh netinstall won't boot

Glad to see you are now using the Arch forum, not Ubuntu Just a piece of advice.
If you you use an arrogant attitude as in some of your posts people will not help you. remember nobody has to help anybody they help of their own free will, and don't need hassle
You need to give your system specs also both your Graphic card specs and anything else that may not be the norm on your system.
you also need to turn off the card you do not use in your system bias. so it does not load after post.
Good luck I'm out of here.

I'm dyslexic Please do not complain about puntuation or spelling and remember most dyslexic people have above average iq.

Offline

Pages: 1

Board footer

Powered by FluxBB