You are not logged in.
You need the kernel from the drm-radeon-testing branch, and a patched mesa and a patched xf86-video-ati driver. You can use my/gtklockers repository.
Then you get this:
(**) RADEON(0): Option "ColorTiling" "True"
(II) RADEON(0): KMS Color Tiling: enabled
Offline
Just ask to alex on irc, it's because i've rebuild xf86-video-ati (got xorg 1.8.1) and not applied the patches, i was guessing they were already applied.
So it's not an issue.
Offline
venky80 wrote:fan keeps running so it is pretty bad
Did you try
echo low > /sys/class/drm/card0/device/power_profile
yes that did help. Perry could you add that to first post. I was able to run youtube HD without issues (but i think flash has no gfx acceleration yet)
does r600 do H264/MPEG4 video acceleration?
Acer Aspire V5-573P Antergos KDE
Offline
You need the kernel from the drm-radeon-testing branch, and a patched mesa and a patched xf86-video-ati driver. You can use my/gtklockers repository.
Then you get this:(**) RADEON(0): Option "ColorTiling" "True"
(II) RADEON(0): KMS Color Tiling: enabled
Got the tiling patches for the ddx somewhere ? i've failed to extract them myself.
Offline
venky80 wrote:fan keeps running so it is pretty bad
Did you try
echo low > /sys/class/drm/card0/device/power_profile
It seems the changes get lost. I set it yesterday to low, and today was "default"... !
Btw:
$ dmesg | grep drm
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (RS780 0x1002:0x9612).
[drm] register mmio base: 0x94300000
[drm] register mmio size: 65536
[drm] Clocks initialized !
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 32bits DDR
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RS780 Microcode
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Enabling audio support
[drm] Default TV standard: NTSC
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] LVDS
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] LCD1: INTERNAL_KLDSCP_LVTMA
[drm] radeon: power management initialized
[drm] fb mappable at 0x80141000
[drm] vram apper at 0x80000000
[drm] size 4096000
[drm] fb depth is 24
[drm] pitch is 5120
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.5.0 20080528 for 0000:01:05.0 on minor 0
Also, my sensors, won't work
# sensors
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +75.4°C (high = +70.0°C, crit = +100.0°C)
acpitz-virtual-0
Adapter: Virtual device
temp1: +75.0°C (crit = +105.0°C)
The second one - which I dont know what it is, usually hits high temps and forces machine to halt.
Last edited by gtklocker (2010-06-03 17:59:13)
Offline
yes that did help. Perry could you add that to first post. I was able to run youtube HD without issues (but i think flash has no gfx acceleration yet)
does r600 do H264/MPEG4 video acceleration?
I complement the first post yesterday. I hope it is understandable.
And no, at the moment there is no full support for video decoding. Just Xv, but this is working flawless for me.
Got the tiling patches for the ddx somewhere ? i've failed to extract them myself.
http://gtklocker.tiven.org/radeon-repo/ … src.tar.gz
http://gtklocker.tiven.org/radeon-repo/ … src.tar.gz
It seems the changes get lost. I set it yesterday to low, and today was "default"... !
Sysfs is a virtual filesystem. It is created during the boot process. http://en.wikipedia.org/wiki/Sysfs
But you can put it in your /etc/rc.local.
Offline
Thanks, now it's working fine;
Offline
is mesa-full recommended or mesa-r600-r700-git. ? Also what are the commands to set dynpm on ?
Acer Aspire V5-573P Antergos KDE
Offline
my grep drm shows this
I see some errors does anyone know what they are?
dmesg|grep drm
Command line: BOOT_IMAGE=/vmlinuz26-drm-radeon-testing root=/dev/disk/by-uuid/87a8806a-f341-4032-a64c-bf4a88c49447 rootfstype=ext4 ro
Kernel command line: BOOT_IMAGE=/vmlinuz26-drm-radeon-testing root=/dev/disk/by-uuid/87a8806a-f341-4032-a64c-bf4a88c49447 rootfstype=ext4 ro
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (RV635 0x1002:0x9593).
[drm] register mmio base: 0xCFEF0000
[drm] register mmio size: 65536
[drm] Clocks initialized !
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 128bits DDR
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RV635 Microcode
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Enabling audio support
[drm] Default TV standard: NTSC
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] HDMI-A
[drm] NONE
[drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] LVDS
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] LCD1: INTERNAL_KLDSCP_LVTMA
[drm] Connector 3:
[drm] DisplayPort
[drm] HPD1
[drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY
[drm] radeon: power management initialized
[drm] fb mappable at 0xD0141000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.5.0 20080528 for 0000:01:00.0 on minor 0
[drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 1sec aborting
[drm:atom_execute_table_locked] *ERROR* atombios stuck executing FABC (len 513, WS 0, PS 4) @ 0xFAFD
[drm] Disabling audio support
[drm] Clocks initialized !
[drm] ring test succeeded in 1 usecs
[drm] ib test succeeded in 0 usecs
[drm] Enabling audio support
[drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 1sec aborting
[drm:atom_execute_table_locked] *ERROR* atombios stuck executing FABC (len 513, WS 0, PS 4) @ 0xFAFD
[drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 1sec aborting
[drm:atom_execute_table_locked] *ERROR* atombios stuck executing FABC (len 513, WS 0, PS 4) @ 0xFAFD
[venky@INEVERUSEWIN7 ~]$
Last edited by venky80 (2010-06-04 03:26:37)
Acer Aspire V5-573P Antergos KDE
Offline
@Perry - you said that Xv is working for you. Are you using Compiz or something? Which card do you have? For me - when I tried to use Xv in SMplayer video just didn't appear.
EDIT: It's really weird - in Gnome MPlayer everything seems good... Any help?
Last edited by megawebmaster (2010-06-04 10:48:04)
Offline
is mesa-full recommended or mesa-r600-r700-git. ? Also what are the commands to set dynpm on ?
you can enable dynpm with:
echo dynpm > /sys/class/drm/card0/device/power_method
mesa-full is recommended as mesa-r600-r700-git is out-of-date.
Offline
@Perry - you said that Xv is working for you. Are you using Compiz or something? Which card do you have? For me - when I tried to use Xv in SMplayer video just didn't appear.
EDIT: It's really weird - in Gnome MPlayer everything seems good... Any help?
For me Xv is also working in smplayer, also with compiz enabled. I have set it to xv (0 - Radeon Textured Video). And i am using a HD4850.
You can check for working xv with: xvinfo
Do you use multiple screens? Are you using a xorg.conf? A "special" mplayer version?
Offline
yes that did help. Perry could you add that to first post. I was able to run youtube HD without issues (but i think flash has no gfx acceleration yet)
does r600 do H264/MPEG4 video acceleration?
If you like to view H264 HD1080p videos, I use SMplayer with video option "gl (veloce - schede ATI)", in Italian it means (speedy - ATI cards). It should be a special video driver to use ati acceleration, with that I am able to play 1080p films very well without frame drops.
It's a lot better than "xv (0 - Radeon Textured Video)" for me.
I hope this will help you
Offline
For me Xv is also working in smplayer, also with compiz enabled. I have set it to xv (0 - Radeon Textured Video). And i am using a HD4850.
You can check for working xv with: xvinfo
Do you use multiple screens? Are you using a xorg.conf? A "special" mplayer version?
xvinfo tells me that Xv is working. I've got simple xorg.conf from your thread, I don't use multiple screens and got mplayer from repos. I've tried to remove smplayer config, mplayer config etc. and nothing is working.
For me gl for ATi card makes screen flicker. It's really annoying, because it happens and is visible... like artifacts. Huh, I'll use GMplayer, while googling in free time for answer.
Offline
mesa-full is recommended as mesa-r600-r700-git is out-of-date.
What exactly do you think is out of date?
If this helped you, please take the time to rate the value of this post:
http://rate.affero.net/andrewthomas/
Offline
If you like to view H264 HD1080p videos, I use SMplayer with video option "gl (veloce - schede ATI)", in Italian it means (speedy - ATI cards). It should be a special video driver to use ati acceleration, with that I am able to play 1080p films very well without frame drops.
It's a lot better than "xv (0 - Radeon Textured Video)" for me.I hope this will help you
Are you sure you use the open source driver and not the catalyst driver? For me xv is faster than gl. And from the technical side xv should be better.
xvinfo tells me that Xv is working. I've got simple xorg.conf from your thread, I don't use multiple screens and got mplayer from repos. I've tried to remove smplayer config, mplayer config etc. and nothing is working.
For me gl for ATi card makes screen flicker. It's really annoying, because it happens and is visible... like artifacts. Huh, I'll use GMplayer, while googling in free time for answer.
Did you try it without an xorg.conf (hal daemon must run)?
@loadheavy:
mesa-r600-r700-git from AUR: fine
mesa-full from AUR: out of date (the maintainer isn't responding
mesa-full from my repo: fine (+ patches for color tiling)
Offline
@Perry3D:
Could you ask a TU so that mesa-full on AUR gets orphaned so that you could adopt it ?
Except for that, I'd like to see the PKGBUILDs you use for the repo on a git repo like Github or Gitorious...!
Offline
Did you try it without an xorg.conf (hal daemon must run)?
No, I can't because I'm using testing repo and there is Xorg 1.8.1, so with you driver it cannot run (IgnoreABI option i xorg.conf)
Offline
Perry3D wrote:Did you try it without an xorg.conf (hal daemon must run)?
No, I can't because I'm using testing repo and there is Xorg 1.8.1, so with you driver it cannot run (IgnoreABI option i xorg.conf)
Did you try to build xf86-video-ati-git from sources ?
Offline
sometimes after resuming from suspend to ram , the mouse is not detected how can I make the system detect my mouse without restarting?
Acer Aspire V5-573P Antergos KDE
Offline
venky80 wrote:is mesa-full recommended or mesa-r600-r700-git. ? Also what are the commands to set dynpm on ?
you can enable dynpm with:
echo dynpm > /sys/class/drm/card0/device/power_methodmesa-full is recommended as mesa-r600-r700-git is out-of-date.
how can I remove dynpm, my screen flickers when i scroll webpages.
power_profile low was the best for me
Acer Aspire V5-573P Antergos KDE
Offline
Restart should reset everything
or
echo profile > /sys/class/drm/card0/device/power_method
Last edited by Perry3D (2010-06-06 22:46:05)
Offline
megawebmaster wrote:Perry3D wrote:Did you try it without an xorg.conf (hal daemon must run)?
No, I can't because I'm using testing repo and there is Xorg 1.8.1, so with you driver it cannot run (IgnoreABI option i xorg.conf)
Did you try to build xf86-video-ati-git from sources ?
Yes. SMplayer still isn't working with Xv. I'm tired of this, I'll just use GMplayer. It isn't as good as SMplayer but is working
Offline
Except for that, I'd like to see the PKGBUILDs you use for the repo on a git repo like Github or Gitorious...!
We're planning it.
Edit: After a reinstallation of Arch (some VERY weird probs), I used [testing] and I figured out xf86-video-ati should be rebuild to be functional with Xorg 1.8. So, Xorg 1.8 users, just rebuild the xf86-video-ati package from the src we've uploaded to the repo.
Last edited by gtklocker (2010-06-07 16:00:28)
Offline
Huh, Xorg server 1.9 RC1 is going to be released today and 1.8 still didn't hit extra... How could it be?
Last edited by megawebmaster (2010-06-07 20:11:08)
Offline