CF Card installation issue

DrMikeDuke · 2010-06-08 21:13:32

Hello,

Please forgive any ignorance on my part but myself and a fairly knowlegable friend have spent several hours
trying to google and debunk this issue: I am unable to have arch64 (latest core image cd) recognise my CF card*.

I am using an IDE>CF adaptor which is set in slave.

We have successfully detected the card and can interact with it under Slackware 13.0 (huge.s - defaults) with the following details:

hdb smi model ata disk drive

lspci reveals that

 AMD_IDE

is the driver in use.

Back in arch, I downloaded hwdetect to ram and ran hwdetect --show-modules:

pata_amd

However when I throw this and as many other modules as I can at boot time** still no success.

the motherboard is an Asus M2N-MX SE Plus (with AMD74xx ide controller..apparently)

* = Disclaimer: not here to debate what is/isnt a suitable install medium: beyond scope of question
** = I *think* I was loading it correctly at boot time, since I cant find ANY documentation on the additional options with the new boot cd cant be sure!

Can any kind soul offer some additional advice?

Kind regards,

Mike.

edit: clarity.

Last edited by DrMikeDuke (2010-06-08 21:15:35)

byte · 2010-06-08 22:09:16

It's not recognized when booting from the latest CD?
'dmesg', please.

DrMikeDuke · 2010-06-09 05:30:36

I'll post a full dmesg (and any other output) a little later on, however I never see a "hdb" appear. (Interestingly, my IDE DVD-Rom drive on the SAME cable DOES appear..go figure)
Gotta crack this one! The Slackware guy is laughing relentlessly

Last edited by DrMikeDuke (2010-06-09 05:31:31)

DrMikeDuke · 2010-06-10 13:58:12

I'm a bit surprised no ones able to help with this. Normally you guys are pretty up on things
I'll be happy if anyone can give me the add-on commands to the boot CD startup in order to get IDE devices recognized -kitchen sink approach-

keenerd · 2010-06-10 16:19:02

Well, it is hard to help with the lack of information.

CF card model? Adapter model? And dmesg, previously requested.

Does the adapter have DMA settings? I can't find any solid docs on the pata_amd module, but it might have config options.

DrMikeDuke · 2010-06-10 17:27:52

Here is the dmesg and lspci output (sorry for the long post!)
The CF card (4GB) and adaptor (CF > IDE) in question are both generic and standard

dmesg:

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.33-ARCH (thomas@evey) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Thu May 13 11:32:37 CEST 2010
Command line: initrd=/boot/archiso.img archisolabel=ARCH_201005 tmpfs_size=75% locale=en_US.UTF-8 BOOT_IMAGE=/boot/vmlinuz26 
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
 BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
 BIOS-e820: 000000003ffbe000 - 000000003ffe0000 (ACPI NVS)
 BIOS-e820: 000000003ffe0000 - 000000003ffee000 (reserved)
 BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
No AGP bridge found
last_pfn = 0x3ffb0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask FFC0000000 write-back
  1 disabled
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000010000 (reserved)
 modified: 0000000000010000 - 000000000009fc00 (usable)
 modified: 000000000009fc00 - 00000000000a0000 (reserved)
 modified: 00000000000e4000 - 0000000000100000 (reserved)
 modified: 0000000000100000 - 000000003ffb0000 (usable)
 modified: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
 modified: 000000003ffbe000 - 000000003ffe0000 (ACPI NVS)
 modified: 000000003ffe0000 - 000000003ffee000 (reserved)
 modified: 000000003fff0000 - 0000000040000000 (reserved)
 modified: 00000000fec00000 - 00000000fec01000 (reserved)
 modified: 00000000fee00000 - 00000000fef00000 (reserved)
 modified: 00000000fff00000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000ff780] ff780
init_memory_mapping: 0000000000000000-000000003ffb0000
 0000000000 - 003fe00000 page 2M
 003fe00000 - 003ffb0000 page 4k
kernel direct mapping tables up to 3ffb0000 @ 16000-19000
RAMDISK: 3f788000 - 3ff8e9b5
ACPI: RSDP 00000000000fb770 00024 (v02 ACPIAM)
ACPI: XSDT 000000003ffb0100 00054 (v01 A_M_I_ OEMXSDT  03000826 MSFT 00000097)
ACPI: FACP 000000003ffb0290 000F4 (v03 A_M_I_ OEMFACP  03000826 MSFT 00000097)
ACPI: DSDT 000000003ffb05d0 065E6 (v01  A0865 A0865000 00000000 INTL 20051117)
ACPI: FACS 000000003ffbe000 00040
ACPI: APIC 000000003ffb0390 00080 (v01 A_M_I_ OEMAPIC  03000826 MSFT 00000097)
ACPI: MCFG 000000003ffb0410 0003C (v01 A_M_I_ OEMMCFG  03000826 MSFT 00000097)
ACPI: OEMB 000000003ffbe040 00060 (v01 A_M_I_ AMI_OEM  03000826 MSFT 00000097)
ACPI: HPET 000000003ffb6bc0 00038 (v01 A_M_I_ OEMHPET0 03000826 MSFT 00000097)
ACPI: SSDT 000000003ffb6c00 00206 (v01 A_M_I_ POWERNOW 00000001 AMD  00000001)
ACPI: Local APIC address 0xfee00000
(12 early reservations) ==> bootmem [0000000000 - 003ffb0000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0001000000 - 00016d7b38]    TEXT DATA BSS ==> [0001000000 - 00016d7b38]
  #2 [003f788000 - 003ff8e9b5]          RAMDISK ==> [003f788000 - 003ff8e9b5]
  #3 [00016d8000 - 00016d8294]              BRK ==> [00016d8000 - 00016d8294]
  #4 [00000ff790 - 0000100000]    BIOS reserved ==> [00000ff790 - 0000100000]
  #5 [00000ff780 - 00000ff790]     MP-table mpf ==> [00000ff780 - 00000ff790]
  #6 [000009fc00 - 00000f1340]    BIOS reserved ==> [000009fc00 - 00000f1340]
  #7 [00000f1474 - 00000ff780]    BIOS reserved ==> [00000f1474 - 00000ff780]
  #8 [00000f1340 - 00000f1474]     MP-table mpc ==> [00000f1340 - 00000f1474]
  #9 [0000010000 - 0000012000]       TRAMPOLINE ==> [0000010000 - 0000012000]
  #10 [0000012000 - 0000016000]      ACPI WAKEUP ==> [0000012000 - 0000016000]
  #11 [0000016000 - 0000017000]          PGTABLE ==> [0000016000 - 0000017000]
 [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880001c00000-ffff8800029fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0003ffb0
On node 0 totalpages: 261951
  DMA zone: 56 pages used for memmap
  DMA zone: 103 pages reserved
  DMA zone: 3824 pages, LIFO batch:0
  DMA32 zone: 3527 pages used for memmap
  DMA32 zone: 254441 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880001800000 s89176 r8192 d21416 u524288
pcpu-alloc: s89176 r8192 d21416 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 258265
Kernel command line: initrd=/boot/archiso.img archisolabel=ARCH_201005 tmpfs_size=75% locale=en_US.UTF-8 BOOT_IMAGE=/boot/vmlinuz26 
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 2182000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Memory: 1015312k/1048256k available (3449k kernel code, 452k absent, 31856k reserved, 1818k data, 484k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:768
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 10485760 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2109.851 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4221.52 BogoMIPS (lpj=7032836)
Security Framework initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
ACPI: Core revision 20091214
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 0) ...
....... works.
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01
Booting Node   0, Processors  #1
Brought up 2 CPUs
Total of 2 processors activated (8442.47 BogoMIPS).
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 0000000040000000 aka 1024M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [40000000, fe0bffff]
bus: [00, 07] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [40000000, fcffffffff]
bus: 00 index 2 mmio: [a0000, bffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xff6fffff] (ignored)
pci 0000:00:01.0: reg 10: [io  0x0900-0x09ff]
pci 0000:00:01.1: reg 10: [io  0x0e00-0x0e3f]
pci 0000:00:01.1: reg 20: [io  0x0600-0x063f]
pci 0000:00:01.1: reg 24: [io  0x0700-0x073f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10: [mem 0xdbeff000-0xdbefffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10: [mem 0xdbefec00-0xdbefecff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:06.0: reg 20: [io  0xffa0-0xffaf]
pci 0000:00:08.0: reg 10: [io  0xc480-0xc487]
pci 0000:00:08.0: reg 14: [io  0xc400-0xc403]
pci 0000:00:08.0: reg 18: [io  0xc080-0xc087]
pci 0000:00:08.0: reg 1c: [io  0xc000-0xc003]
pci 0000:00:08.0: reg 20: [io  0xbc00-0xbc0f]
pci 0000:00:08.0: reg 24: [mem 0xdbefd000-0xdbefdfff]
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:01:06.0: reg 10: [mem 0xdbfff000-0xdbffffff]
pci 0000:01:06.0: reg 14: [io  0xdc00-0xdc3f]
pci 0000:01:06.0: reg 18: [mem 0xdbfc0000-0xdbfdffff]
pci 0000:01:06.0: reg 30: [mem 0xdbfe0000-0xdbfeffff pref]
pci 0000:01:06.0: supports D1 D2
pci 0000:01:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:06.0: PME# disabled
pci 0000:01:07.0: reg 10: [io  0xd880-0xd89f]
pci 0000:01:07.0: supports D1 D2
pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:04.0:   bridge window [mem 0xdbf00000-0xdbffffff]
pci 0000:02:00.0: reg 10: [mem 0xdf000000-0xdfffffff]
pci 0000:02:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xdc000000-0xddffffff 64bit]
pci 0000:02:00.0: reg 24: [io  0xec00-0xec7f]
pci 0000:02:00.0: reg 30: [mem 0xdefe0000-0xdeffffff pref]
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:09.0:   bridge window [mem 0xdc000000-0xdfffffff]
pci 0000:00:09.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:0b.0: PCI bridge to [bus 03-03]
pci 0000:00:0c.0: PCI bridge to [bus 04-04]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:05: disabling [io  0x0900-0x097f] because it overlaps 0000:00:01.0 BAR 0 [io  0x0900-0x09ff]
pnp 00:05: disabling [io  0x0980-0x09ff] because it overlaps 0000:00:01.0 BAR 0 [io  0x0900-0x09ff]
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: [io  0x0a30-0x0a37] has been reserved
system 00:05: [io  0x04d0-0x04d1] has been reserved
system 00:05: [io  0x0800-0x080f] has been reserved
system 00:05: [io  0x0500-0x057f] has been reserved
system 00:05: [io  0x0580-0x05ff] has been reserved
system 00:05: [io  0x0800-0x087f] could not be reserved
system 00:05: [io  0x0880-0x08ff] has been reserved
system 00:05: [io  0x0d00-0x0d7f] has been reserved
system 00:05: [io  0x0d80-0x0dff] has been reserved
system 00:05: [io  0x2000-0x207f] has been reserved
system 00:05: [io  0x2080-0x20ff] has been reserved
system 00:05: [mem 0xfefe0000-0xfefe01ff] has been reserved
system 00:05: [mem 0xfefe1000-0xfefe1fff] has been reserved
system 00:05: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:05: [mem 0xffb80000-0xffffffff] could not be reserved
system 00:05: [mem 0xff300000-0xff3fffff] has been reserved
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: [io  0x0230-0x023f] has been reserved
system 00:09: [io  0x0290-0x029f] has been reserved
system 00:09: [io  0x0a00-0x0a0f] has been reserved
system 00:09: [io  0x0a10-0x0a1f] has been reserved
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x000c0000-0x000cffff] has been reserved
system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0b: [mem 0x00100000-0x3fffffff] could not be reserved
system 00:0b: [mem 0xff700000-0xffffffff] could not be reserved
pci 0000:00:04.0: PCI bridge to [bus 01-01]
pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:04.0:   bridge window [mem 0xdbf00000-0xdbffffff]
pci 0000:00:04.0:   bridge window [mem pref disabled]
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:09.0:   bridge window [mem 0xdc000000-0xdfffffff]
pci 0000:00:09.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:0b.0: PCI bridge to [bus 03-03]
pci 0000:00:0b.0:   bridge window [io  disabled]
pci 0000:00:0b.0:   bridge window [mem disabled]
pci 0000:00:0b.0:   bridge window [mem pref disabled]
pci 0000:00:0c.0: PCI bridge to [bus 04-04]
pci 0000:00:0c.0:   bridge window [io  disabled]
pci 0000:00:0c.0:   bridge window [mem disabled]
pci 0000:00:0c.0:   bridge window [mem pref disabled]
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xdbf00000-0xdbffffff]
pci_bus 0000:01: resource 3 [io  0x0000-0xffff]
pci_bus 0000:01: resource 4 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xdc000000-0xdfffffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:01:06.0: Firmware left e100 interrupts enabled; disabling
pci 0000:02:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 8218k freed
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1276190115.300:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 2000
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:09.0: setting latency timer to 64
pcieport 0000:00:09.0: irq 24 for MSI/MSI-X
pcieport 0000:00:0b.0: setting latency timer to 64
pcieport 0000:00:0b.0: irq 25 for MSI/MSI-X
pcieport 0000:00:0c.0: setting latency timer to 64
pcieport 0000:00:0c.0: irq 26 for MSI/MSI-X
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 484k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
SCSI subsystem initialized
usbcore: registered new device driver usb
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
e100 0000:01:06.0: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 23, io mem 0xdbefec00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
libata version 3.00 loaded.
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
e100 0000:01:06.0: PME# disabled
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
e100: eth0: e100_probe: addr 0xdbfff000, irq 19, MAC addr 00:02:b3:30:12:6a
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 22, io mem 0xdbeff000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
pata_acpi 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
pata_acpi 0000:00:08.0: setting latency timer to 64
pata_acpi 0000:00:08.0: PCI INT A disabled
ata1.01: both IDENTIFYs aborted, assuming NODEV
ata1.00: ATAPI: SAMSUNG DVD-ROM SD-612, BS03, max MWDMA2
ata1: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0x0) ACPI=0x39f (120:120:0x10)
ata1.00: configured for MWDMA2
scsi 0:0:0:0: CD-ROM            SAMSUNG  DVD-ROM SD-612   0.3  PQ: 0 ANSI: 5
ata2: port disabled. ignoring.
sata_nv 0000:00:08.0: version 3.5
sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:08.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xc480 ctl 0xc400 bmdma 0xbc00 irq 21
ata4: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xbc08 irq 21
ata3: SATA link down (SStatus 0 SControl 300)
usb 2-5: new low speed USB device using ohci_hcd and address 2
ata4: SATA link down (SStatus 0 SControl 300)
sr0: scsi3-mmc drive: 4x/32x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
usbcore: registered new interface driver hiddev
input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input1
generic-usb 0003:0461:4D15.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:02.0-5/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sr 0:0:0:0: Attached scsi generic sg0 type 5
usb 2-6: new full speed USB device using ohci_hcd and address 3
hub 2-6:1.0: USB hub found
hub 2-6:1.0: 3 ports detected
usb 2-6.1: new full speed USB device using ohci_hcd and address 4
input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6.1/2-6.1:1.0/input/input2
generic-usb 0003:413C:2002.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-0000:00:02.0-6.1/input0
input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6.1/2-6.1:1.1/input/input3
generic-usb 0003:413C:2002.0003: input,hidraw2: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb-0000:00:02.0-6.1/input1
UDF-fs: Partition marked readonly; forcing readonly mount
aufs 2-standalone.tree-33-20100426
loop: module loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
aufs test_add:248:mount[662]: uid/gid/perm /tmpfs/mnt/overlay 0/0/0755, 0/0/01777
aufs test_add:248:mount[672]: uid/gid/perm /tmpfs/mnt/root-image 0/0/0755, 0/0/01777
udev: starting version 151
input: PC Speaker as /devices/platform/pcspkr/input/input4
EDAC MC: Ver: 2.1.0 May 13 2010
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
i2c i2c-0: nForce2 SMBus adapter at 0x600
i2c i2c-1: nForce2 SMBus adapter at 0x700
EDAC amd64_edac:  Ver: 3.3.0 May 13 2010
EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
amd64_edac: probe of 0000:00:18.2 failed with error -22
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
CA0106 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 18 (level, low) -> IRQ 18
snd-ca0106: Model 1013 Rev 00000000 Serial 10131102

lspci -v:

00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
    Subsystem: ASUSTeK Computer Inc. Device 8234
    Flags: bus master, 66MHz, fast devsel, latency 0
    Capabilities: [44] HyperTransport: Slave or Primary Interface
    Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-

00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
    Subsystem: ASUSTeK Computer Inc. Device 8234
    Flags: bus master, 66MHz, fast devsel, latency 0
    I/O ports at 0900 [size=256]

00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
    Subsystem: ASUSTeK Computer Inc. Device 8234
    Flags: 66MHz, fast devsel, IRQ 10
    I/O ports at 0e00 [size=64]
    I/O ports at 0600 [size=64]
    I/O ports at 0700 [size=64]
    Capabilities: [44] Power Management version 2
    Kernel driver in use: nForce2_smbus
    Kernel modules: i2c-nforce2

00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
    Subsystem: ASUSTeK Computer Inc. Device 8234
    Flags: 66MHz, fast devsel

00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) (prog-if 10 [OHCI])
    Subsystem: ASUSTeK Computer Inc. Device 8234
    Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
    Memory at dbeff000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
    Kernel driver in use: ohci_hcd
    Kernel modules: ohci-hcd

00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) (prog-if 20 [EHCI])
    Subsystem: ASUSTeK Computer Inc. Device 8234
    Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
    Memory at dbefec00 (32-bit, non-prefetchable) [size=256]
    Capabilities: [44] Debug port: BAR=1 offset=0098
    Capabilities: [80] Power Management version 2
    Kernel driver in use: ehci_hcd
    Kernel modules: ehci-hcd

00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) (prog-if 01 [Subtractive decode])
    Flags: bus master, 66MHz, fast devsel, latency 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
    I/O behind bridge: 0000d000-0000dfff
    Memory behind bridge: dbf00000-dbffffff
    Capabilities: [b8] Subsystem: ASUSTeK Computer Inc. Device 8234
    Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed-

00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) (prog-if 8a [Master SecP PriP])
    Subsystem: ASUSTeK Computer Inc. Device 8234
    Flags: bus master, 66MHz, fast devsel, latency 0
    [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
    [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
    [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
    [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
    I/O ports at ffa0 [size=16]
    Capabilities: [44] Power Management version 2
    Kernel driver in use: pata_amd
    Kernel modules: ata_generic, pata_acpi, pata_amd, ide-pci-generic, amd74xx

00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
    Subsystem: ASUSTeK Computer Inc. Device 8234
    Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
    I/O ports at c480 [size=8]
    I/O ports at c400 [size=4]
    I/O ports at c080 [size=8]
    I/O ports at c000 [size=4]
    I/O ports at bc00 [size=16]
    Memory at dbefd000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
    Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
    Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
    Kernel driver in use: sata_nv
    Kernel modules: ata_generic, pata_acpi, sata_nv, ide-pci-generic

00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: 0000e000-0000efff
    Memory behind bridge: dc000000-dfffffff
    Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
    Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 8234
    Capabilities: [48] Power Management version 2
    Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
    Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
    Capabilities: [80] Express Root Port (Slot+), MSI 00
    Capabilities: [100] Virtual Channel
    Kernel driver in use: pcieport
    Kernel modules: shpchp

00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 8234
    Capabilities: [48] Power Management version 2
    Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
    Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
    Capabilities: [80] Express Root Port (Slot+), MSI 00
    Capabilities: [100] Virtual Channel
    Kernel driver in use: pcieport
    Kernel modules: shpchp

00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 8234
    Capabilities: [48] Power Management version 2
    Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
    Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
    Capabilities: [80] Express Root Port (Slot+), MSI 00
    Capabilities: [100] Virtual Channel
    Kernel driver in use: pcieport
    Kernel modules: shpchp

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
    Flags: fast devsel
    Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
    Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
    Flags: fast devsel
    Kernel modules: amd64_edac_mod

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
    Flags: fast devsel
    Capabilities: [f0] Secure device <?>
    Kernel driver in use: k8temp
    Kernel modules: k8temp

01:06.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 0c)
    Subsystem: Intel Corporation EtherExpress PRO/100 S Desktop Adapter
    Flags: bus master, medium devsel, latency 64, IRQ 19
    Memory at dbfff000 (32-bit, non-prefetchable) [size=4K]
    I/O ports at dc00 [size=64]
    Memory at dbfc0000 (32-bit, non-prefetchable) [size=128K]
    Expansion ROM at dbfe0000 [disabled] [size=64K]
    Capabilities: [dc] Power Management version 2
    Kernel driver in use: e100
    Kernel modules: e100

01:07.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster
    Subsystem: Creative Labs Soundblaster X-Fi Xtreme Audio
    Flags: bus master, medium devsel, latency 64, IRQ 18
    I/O ports at d880 [size=32]
    Capabilities: [dc] Power Management version 2
    Kernel driver in use: CA0106
    Kernel modules: snd-ca0106

02:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8400 GS] (rev a1) (prog-if 00 [VGA controller])
    Subsystem: Giga-byte Technology Device 3463
    Flags: bus master, fast devsel, latency 0, IRQ 11
    Memory at df000000 (32-bit, non-prefetchable) [size=16M]
    Memory at c0000000 (64-bit, prefetchable) [size=256M]
    Memory at dc000000 (64-bit, non-prefetchable) [size=32M]
    I/O ports at ec00 [size=128]
    Expansion ROM at defe0000 [disabled] [size=128K]
    Capabilities: [60] Power Management version 2
    Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
    Capabilities: [78] Express Endpoint, MSI 00
    Capabilities: [100] Virtual Channel
    Capabilities: [128] Power Budgeting <?>
    Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
    Kernel modules: nvidiafb

to also restate a question I had, does anyone know of an equivilant to Slackwares "huge.smp" kernel for live cd installation, a kitchen-sink
style boot may fix this if noone has any ideas about specifics.

Thanks.

Last edited by DrMikeDuke (2010-06-10 17:35:11)

byte · 2010-06-16 07:46:26

Sorry for the late reply, been a week off...

You should try to load the module manually: 'modprobe ide-cs'
Then look at dmesg again if the device got created.

DrMikeDuke · 2010-06-16 08:00:04

byte wrote:

Sorry for the late reply, been a week off...
You should try to load the module manually: 'modprobe ide-cs'
Then look at dmesg again if the device got created.

I will definitely try this, thank you!

byte · 2010-06-16 11:03:10

After all, I think that wouldn't work. It's a bit more difficult:

modprobe -r pata_amd
modprobe amd74xx
modprobe ide-cs

But then it should show results.

DrMikeDuke · 2010-06-16 14:43:09

I'm afraid that did not work : ( also I couldn't unload pata_amd as it was in use not sure if that would have made a difference)

Further details, the adaptor I'm using is labeled:

HSXSP-2108P

and the CF card just says:

CF/4GB 2003 Memory Technology Company Inc.

byte · 2010-06-16 14:45:29

Mh.
Try booting the CD with "disablemodules=pata_amd"
(in the menu, hit TAB and append it)

Last edited by byte (2010-06-16 14:46:04)

DrMikeDuke · 2010-06-17 07:44:57

byte wrote:

Mh.
Try booting the CD with "disablemodules=pata_amd"
(in the menu, hit TAB and append it)

Hi,

Tried disabling pata_amd at boot, and realised that my CDROM drive depends upon it, so naturally, the boot hung.
tried again with enablemodules=amd74xx disablemodules=pata_amd but no luck there either >: (

Arch Linux

#1 2010-06-08 21:13:32

CF Card installation issue

#2 2010-06-08 22:09:16

Re: CF Card installation issue

#3 2010-06-09 05:30:36

Re: CF Card installation issue

#4 2010-06-10 13:58:12

Re: CF Card installation issue

#5 2010-06-10 16:19:02

Re: CF Card installation issue

#6 2010-06-10 17:27:52

Re: CF Card installation issue

#7 2010-06-16 07:46:26

Re: CF Card installation issue

#8 2010-06-16 08:00:04

Re: CF Card installation issue

#9 2010-06-16 11:03:10

Re: CF Card installation issue

#10 2010-06-16 14:43:09

Re: CF Card installation issue

#11 2010-06-16 14:45:29

Re: CF Card installation issue

#12 2010-06-17 07:44:57

Re: CF Card installation issue

Board footer