The AMD/ATI Bar & Grill

Kariddi · 2010-06-25 14:01:37

Vi0L0 wrote:

@Kariddi: maybe its some 2D acceleration issue... did you try to use old xaa rendering? (see bottom of catalyst wiki how to enable it)

The same happened with the 10.5 drivers, where the 2d accelleration wasn't enabled by default, so I suppose the problem lies somewhere else

Last edited by Kariddi (2010-06-25 14:01:57)

Vi0L0 · 2010-06-25 14:38:37

@Kariddi: no matter if kwin is on or off?

pnutzh4x0r · 2010-06-27 04:44:13

rulex wrote:

ok this is annoying. it seems i cant set a virtual resolution.
...
but now when in X and i run xrandr the max resolution for both my displays are 1680x1050 and it says screen cannot be larger than 1680x1680.
wierd stuff i tell you. I've had this working perfectly before.

I had a similar problem. Try setting a large square resolution like "Virtual 3072 3072". This allowed me to do 1366x768 + 1680x1050. Before, I tried "Virtual 3046 1050", which is the exact dimensions I wanted, and I had the same problem... that is xrandr would not pick up the Virtual resolution settings at all. Setting it to a larger square resolution fixed that problem and allowed me to have my normal LCD + my larger external LCD using xrandr. Hope this helps.

Last edited by pnutzh4x0r (2010-06-27 04:44:36)

dkxls · 2010-06-27 22:20:53

Hello,

I updated today my system, which means I upgraded:
kernel .33 -> .34
xorg-server 1.7 -> 1.8
catalyst 10.5 -> 10.6

I'm using the catalyst-repo which works fine. Thanks to Vi0L0!
However, I'm only using the catalyst-driver from this repo and the xorg-server from extra! And that is exactly the strange part: It works. Wasn't the 10.6 supposed to only run with a version-patched xorg.server? Maybe somebody could shade some light on this.
The relevant part of my xorg.conf is here:
Section "Device"
Identifier "Card1_2"
Driver "fglrx"
VendorName "ATI Technologies Inc"
BoardName "Mobility Radeon HD 3650"
BusID "PCI:1:0:0"
EndSection

I put my Xorg.log to http://pastebin.com/T3T4uQEU
Seams like 10.6 works with the stock xorg-server and as you can see 2D and 3D acceleration works fine. Just to mention it, the resizing issue with KDE has anyhow never been a problem for me, since I don't use desktop effects. So I never had a need for any kind of patched xorg-server. :-)

Cheers,
Armin

Cdh · 2010-06-28 04:51:12

Read post #1999?

ATi didnt announce xserver 1.8 support. But its working!

dkxls · 2010-06-28 10:37:20

@Vi0L0: mplayer-vaapi in AUR does no longer depend on libva-sds in the catalyst repo. The libva in extra is now build with the sds support, which makes the libva-sds obsolete.

lewis1711 · 2010-06-28 12:23:49

OK, I updated to Catalyst10.6, and I used the "XXA,TRUE command, but it is still artifact city here.

At least with firefox and pidgin. Is there anything else I can try? Attempted both patched xorg servers as well.

using mobility a radeonhd 3400

dkxls · 2010-06-28 14:18:56

Cdh wrote:

Read post #1999?
ATi didnt announce xserver 1.8 support. But its working!

Thanks for the hint. That's nice to know. :-)

Vi0L0 · 2010-06-28 14:36:13

dkxls wrote:

@Vi0L0: mplayer-vaapi in AUR does no longer depend on libva-sds in the catalyst repo. The libva in extra is now build with the sds support, which makes the libva-sds obsolete.

Nice, thanks . So removing libva-sds and updating wiki.

rulex · 2010-06-29 15:28:13

pnutzh4x0r wrote:

I had a similar problem. Try setting a large square resolution like "Virtual 3072 3072". This allowed me to do 1366x768 + 1680x1050. Before, I tried "Virtual 3046 1050", which is the exact dimensions I wanted, and I had the same problem... that is xrandr would not pick up the Virtual resolution settings at all. Setting it to a larger square resolution fixed that problem and allowed me to have my normal LCD + my larger external LCD using xrandr. Hope this helps.

thanks! setting it to a square fixed it

Faxanadu · 2010-06-30 16:48:38

WOW I can't believe it, Catalyst finally works in my x86_64 box!, since xorg 1.7, catalyst 10.6 finally works .

Phitherek_ · 2010-06-30 20:26:58

Hmmm... Sorry, that completely out of topic, but... Some time ago (longer) there was a problem with Catalyst and Xorg - I have stopped upgrading Xorg then. Now I am planning to do a full update of my Arch (after half of a year!) and I have a question - if I update both Catalyst and Xorg, will this combination work properly now? In other words, can I un-ignore the Xorg packages to be updated? Thank you for any help.

Last edited by Phitherek_ (2010-06-30 20:29:30)

McFlow · 2010-06-30 20:42:51

Is there something new concerning the segfault issue with catalyst 10.6?
I tried it again with the catalyst repo. I put it above all other repos in clyde.conf.
I installed catalyst 10.6 from the catalyst repo and with the xorg-server 1.8 from extra, I still get a segmentation fault.
Which packages are known to work? (espacially for those who had the segfault problem as well)
Creating a new xorg.conf and removing the mentioned files above did not help.

With 10.4 the situation ist not satisfying because wine can't run applications.

xcb_io.c:656: _XRead: assurance »dpy->xcb->reply_data != ((void *)0)« not achieved.

IT's translated but maybe its clear what it says...

Last edited by McFlow (2010-06-30 20:45:17)

ChemBro · 2010-06-30 21:03:15

Phitherek_ wrote:

Hmmm... Sorry, that completely out of topic, but... Some time ago (longer) there was a problem with Catalyst and Xorg - I have stopped upgrading Xorg then. Now I am planning to do a full update of my Arch (after half of a year!) and I have a question - if I update both Catalyst and Xorg, will this combination work properly now? In other words, can I un-ignore the Xorg packages to be updated? Thank you for any help.

It's okay, if you use the catalyst repo. If you're building catalyst yourself, you have to build the xserver first.

Phitherek_ · 2010-06-30 21:11:29

Must I BUILD the xserver or can I install the PACKAGE? I will be doing a full upgrade by yaourt and there AUR goes after normal repositories, so it' s OK.

Vi0L0 · 2010-07-01 02:02:56

ChemBro wrote:

If you're building catalyst yourself, you have to build the xserver first.

build xserver? umm... what for? <rhetorical;P>

Phitherek_ wrote:

Must I BUILD the xserver or can I install the PACKAGE? I will be doing a full upgrade by yaourt and there AUR goes after normal repositories, so it' s OK.

Just take xserver from [extra] repo. If you are building catalyst via aur dont forget to reboot your precious arch after updating kernel and then build catalyst. If you are running stack kernel I recommend catalyst repo.

Phitherek_ · 2010-07-01 11:31:26

Ok, I will try this catalyst repo . Thank you for help, now I can start my update .

o'neill · 2010-07-01 11:44:02

hey guys,

First I want to apologize to you for my bad English.

I tried 2 days long to install catalyst 10.6 from Vi0L0's repo, but everytime if i started X, everything went black ( no terminal, no X, no error, nothing)

I installed my arch new and ask myself what did I wrong?
here are the steps:

First of all, I've got an arch(64bit) without X. Just installed the core. my graficcard is a RADEONHD 5750

1) Installing xorg:

pacman -S xorg

xorgs installs automatically the xf86-video-vesa driver. should I remove it?
2) Go on this page
and setup the [catalyst] repo in pacman.conf

 (...)
[catalyst]
Server = http://catalyst.apocalypsus.net/repo/catalyst/x86_64
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
(...)

Updating pacman:

pacman -Syy
pacman -Suu

3) Install catalyst from Vi0L0's repo:

(Check if libgl is installed, if yes then remove it)

pacman -Rd libgl

install catalyst:

pacman -S catalyst

Wiki says:

Wiki wrote:

Don't forget to prepare your /etc/X11/xorg.conf for catalyst. Use aticonfig --initial if you don't have prepared xorg.conf. Also add fglrx module to MODULES array in /etc/rc.conf

So I do that.

Should I configure here the Xorg, like:

Xorg -configure

I remember, that Xorg crashes, because he didn't find the fglrx-module.

Or should I prepare it by myself?

Should I also do a reboot here or before?

4) Now it's going a bit difficult for me:

Wiki says:

Wiki wrote:

For x86_64 users [catalyst] provides lib32-catalyst-utils package needed to run 32-bit opengl applications and wine games.

Yeah I need that... installing:

pacman -S lib32-catalyst-utils

And now comes the part where my brain stucks:
Wiki says:

Wiki wrote:

With catalyst 10.6 AMD/ATi has provided 2D acceleration - that funcionality has also fixed problems with maximizing/resizing windows , so out now there is no need of using backclear/backfill patches on xserver - although repository still contains xserver packages patched with this patches just in case that they may for somebody work better than unpatched xserver.
Please note that those patches will NOT fix any artifacts issues if you are experiencing that kind of known errors with catalyst 10.6. [catalyst] repository contains xorg-server-backclear (patched with backclear patch) and xorg-server-1.8-catalyst-maximize-fix (patched with fedora patch) packages. Both this patches were fixing problems with maximizing/resizing (until catalyst 10.6 with hes 2D acceleration arrived) but they were doing it in different way - you may choose which patched xserver is best for you. To remove xorg-server and install xorg-server-backclear just type:
# pacman -Rd xorg-server
# pacman -S xorg-server-backclear
Similar with xorg-server-1.8-catalyst-maximize-fix.

Should I do that?!
I installed that before and I'm not sure if that was the reason why X failed.
And what does the last sentence mean:

Last Sentence wrote:

Similar with xorg-server-1.8-catalyst-maximize-fix.

Should I also install that or not?

-) Other Questions:
Should I prepare the xorg.conf? I mean, I do not have any special requirements. I just have a 21" monitor, a keyboard and a mouse. That's all.

If somebody could help me, I would kiss him from the bottom to the top!

Last edited by o'neill (2010-07-01 11:45:28)

maevius · 2010-07-01 12:34:01

Yeah, it's a little bit confusing... Have you run aticonfig --initial? Other than that make sure you install these too

xf86-input-evdev xf86-input-keyboard xf86-input-mouse

The xorg-server packages in the catalyst repos are patched. If you don't experience minimize/maximize problems there is no need to install them, you just stick with xorg-server from extra repo. The sentence which you don't get means that the same instructions for xorg-server-backclear also apply for xorg-server-1.8-catalyst-maximize-fix.

Last edited by maevius (2010-07-01 12:43:05)

Vi0L0 · 2010-07-01 12:54:26

Well it looks like you did all steps correctly...

o'neill wrote:

1) Installing xorg:
pacman -S xorg
xorgs installs automatically the xf86-video-vesa driver. should I remove it?

xf86-video-vesa is sometimes used if fglrx isnt working, so you may leave it installed.

o'neill wrote:

Should I configure here the Xorg, like:
Xorg -configure
I remember, that Xorg crashes, because he didn't find the fglrx-module.
Or should I prepare it by myself?

Xorg -configure could brake something and isnt recommended. Just use aticonfig --initial to build basic xorg.conf, its all that you need right now, all input devices should be detected automagically by xorg-server. To tune your xorg.conf you may use amdcccle after succesfull X start.

o'neill wrote:

Should I also do a reboot here or before?

You may reboot, or just
# modprobe fglrx
and then start X

o'neill wrote:

4) Now it's going a bit difficult for me:
Wiki says:
Wiki wrote:
For x86_64 users [catalyst] provides lib32-catalyst-utils package needed to run 32-bit opengl applications and wine games.
Yeah I need that... installing:
pacman -S lib32-catalyst-utils

Ok, but you dont need it right now, install it after making X start.

o'neill wrote:

And now comes the part where my brain stucks:
Wiki says:
Wiki wrote:
With catalyst 10.6 AMD/ATi has provided 2D acceleration - that funcionality has also fixed problems with maximizing/resizing windows , so out now there is no need of using backclear/backfill patches on xserver - although repository still contains xserver packages patched with this patches just in case that they may for somebody work better than unpatched xserver.
Please note that those patches will NOT fix any artifacts issues if you are experiencing that kind of known errors with catalyst 10.6. [catalyst] repository contains xorg-server-backclear (patched with backclear patch) and xorg-server-1.8-catalyst-maximize-fix (patched with fedora patch) packages. Both this patches were fixing problems with maximizing/resizing (until catalyst 10.6 with hes 2D acceleration arrived) but they were doing it in different way - you may choose which patched xserver is best for you. To remove xorg-server and install xorg-server-backclear just type:
# pacman -Rd xorg-server
# pacman -S xorg-server-backclear
Similar with xorg-server-1.8-catalyst-maximize-fix.
Should I do that?!
I installed that before and I'm not sure if that was the reason why X failed.

You actually dont need this. Try to run X with basic xorg-server. And NO - patched xserver is not the reason why X failed.

o'neill wrote:

And what does the last sentence mean:
Last Sentence wrote:
Similar with xorg-server-1.8-catalyst-maximize-fix.
Should I also install that or not?

xorg-server or xorg-server-backclear or xorg-server-1.8-catalyst-maximize-fix. You cannot install it simultaneously.
Basically xorg-server-backclear and xorg-server-1.8-catalyst-maximize-fix packages brings faster maximizing/resizing windows for compositing and should be used by people whose get problems with new ATi 2D acceleration and switched to old xaa rendering method, more here

Is your /var/log/Xorg.0.log telling anything?

BTW yep my english isnt splendid, it would be nice if somebody could correct me and make wiki more clear/logical :-)

maevius · 2010-07-01 13:01:31

Vi0L0 wrote:

BTW yep my english isnt splendid, it would be nice if somebody could correct me and make wiki more clear/logical :-)

I am planning to do so, once I gather all the stuff I think should be better clarified.

Vi0L0 · 2010-07-01 13:23:45

maevius wrote:

Vi0L0 wrote:
BTW yep my english isnt splendid, it would be nice if somebody could correct me and make wiki more clear/logical :-)
I am planning to do so, once I gather all the stuff I think should be better clarified.

I just made some changes which i believe made it more clear, but i will really appreciate you help here.

o'neill · 2010-07-01 13:42:21

THANK YOU
I think I'm gonna kiss you Vi0L0 and maevius

X is now working...or not -> He doesn't recognize the keyboard nor mouse. the LEDs on the keyboard are turned off.

I've installed:

pacman -S xf86-input-evdev xf86-input-keyboard xf86-input-mouse

also 'hal'

pacman -S hal

and add it to the deamons array field.

Forgot something?

o'neill · 2010-07-01 14:33:44

got it...

the packages were corrupted... strange
now everything works for me!!

@Vi0L0:

Here is the Xorg.log

[    59.475] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[    59.475] 
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[    59.475] X Protocol Version 11, Revision 0
[    59.475] Build Operating System: Linux 2.6.34-ARCH x86_64 
[    59.476] Current Operating System: Linux xarch 2.6.34-ARCH #1 SMP PREEMPT Sat Jun 19 00:07:49 CEST 2010 x86_64
[    59.476] Kernel command line: root=/dev/disk/by-uuid/33c90b36-ded6-4cc6-be81-b825c3770fa2 ro nomodset
[    59.476] Build Date: 21 June 2010  12:01:49PM
[    59.476]  
[    59.476] Current version of pixman: 0.18.2
[    59.476]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    59.476] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    59.477] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul  1 16:29:47 2010
[    59.478] (==) Using config file: "/etc/X11/xorg.conf"
[    59.478] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    59.479] (==) ServerLayout "aticonfig Layout"
[    59.479] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    59.479] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    59.479] (**) |   |-->Device "aticonfig-Device[0]-0"
[    59.479] (==) Automatically adding devices
[    59.479] (==) Automatically enabling devices
[    59.482] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[    59.482]     Entry deleted from font path.
[    59.482] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    59.482]     Entry deleted from font path.
[    59.482] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    59.482]     Entry deleted from font path.
[    59.484] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
[    59.484] (==) ModulePath set to "/usr/lib/xorg/modules"
[    59.484] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    59.484] (II) Loader magic: 0x7ce880
[    59.484] (II) Module ABI versions:
[    59.484]     X.Org ANSI C Emulation: 0.4
[    59.484]     X.Org Video Driver: 7.0
[    59.484]     X.Org XInput driver : 9.0
[    59.484]     X.Org Server Extension : 3.0
[    59.488] (--) PCI:*(0:1:0:0) 1002:68be:174b:e138 ATI Technologies Inc rev 0, Mem @ 0xd0000000/268435456, 0xfbcc0000/131072, I/O @ 0x0000c000/256, BIOS @ 0x????????/131072
[    59.488] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    59.488] (II) "extmod" will be loaded by default.
[    59.488] (II) "dbe" will be loaded by default.
[    59.488] (II) "glx" will be loaded by default.
[    59.488] (II) "record" will be loaded by default.
[    59.488] (II) "dri" will be loaded by default.
[    59.488] (II) "dri2" will be loaded by default.
[    59.488] (II) LoadModule: "extmod"
[    59.489] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    59.491] (II) Module extmod: vendor="X.Org Foundation"
[    59.491]     compiled for 1.8.1.902, module version = 1.0.0
[    59.491]     Module class: X.Org Server Extension
[    59.491]     ABI class: X.Org Server Extension, version 3.0
[    59.491] (II) Loading extension MIT-SCREEN-SAVER
[    59.491] (II) Loading extension XFree86-VidModeExtension
[    59.491] (II) Loading extension XFree86-DGA
[    59.491] (II) Loading extension DPMS
[    59.491] (II) Loading extension XVideo
[    59.491] (II) Loading extension XVideo-MotionCompensation
[    59.491] (II) Loading extension X-Resource
[    59.491] (II) LoadModule: "dbe"
[    59.491] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    59.491] (II) Module dbe: vendor="X.Org Foundation"
[    59.491]     compiled for 1.8.1.902, module version = 1.0.0
[    59.491]     Module class: X.Org Server Extension
[    59.491]     ABI class: X.Org Server Extension, version 3.0
[    59.491] (II) Loading extension DOUBLE-BUFFER
[    59.491] (II) LoadModule: "glx"
[    59.492] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    59.495] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[    59.495]     compiled for 7.5.0, module version = 1.0.0
[    59.495] (II) Loading extension GLX
[    59.495] (II) LoadModule: "record"
[    59.495] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    59.496] (II) Module record: vendor="X.Org Foundation"
[    59.496]     compiled for 1.8.1.902, module version = 1.13.0
[    59.496]     Module class: X.Org Server Extension
[    59.496]     ABI class: X.Org Server Extension, version 3.0
[    59.496] (II) Loading extension RECORD
[    59.496] (II) LoadModule: "dri"
[    59.496] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    59.498] (II) Module dri: vendor="X.Org Foundation"
[    59.498]     compiled for 1.8.1.902, module version = 1.0.0
[    59.498]     ABI class: X.Org Server Extension, version 3.0
[    59.498] (II) Loading extension XFree86-DRI
[    59.498] (II) LoadModule: "dri2"
[    59.498] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    59.498] (II) Module dri2: vendor="X.Org Foundation"
[    59.498]     compiled for 1.8.1.902, module version = 1.2.0
[    59.498]     ABI class: X.Org Server Extension, version 3.0
[    59.499] (II) Loading extension DRI2
[    59.499] (II) LoadModule: "fglrx"
[    59.499] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    59.530] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[    59.532]     compiled for 1.7.1, module version = 8.74.4
[    59.532]     Module class: X.Org Video Driver
[    59.534] (II) Loading sub module "fglrxdrm"
[    59.534] (II) LoadModule: "fglrxdrm"
[    59.534] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    59.536] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    59.536]     compiled for 1.7.1, module version = 8.74.4
[    59.536] (II) ATI Proprietary Linux Driver Version Identifier:8.74.4
[    59.536] (II) ATI Proprietary Linux Driver Release Identifier: 8.741                                
[    59.536] (II) ATI Proprietary Linux Driver Build Date: May 27 2010 12:52:57
[    59.536] (--) using VT number 7

[    59.538] (II) Primary Device is: PCI 01@00:00:0
[    59.538] (WW) Falling back to old probe method for fglrx
[    59.542] (II) Loading PCS database from /etc/ati/amdpcsdb
[    59.543] (--) Chipset Supported AMD Graphics Processor (0x68BE) found
[    59.543] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[    59.543] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    59.543] (II) AMD Video driver is signed
[    59.543] (II) fglrx(0): pEnt->device->identifier=0x21a2540
[    59.543] (II) fglrx(0): === [atiddxPreInit] === begin
[    59.543] (II) Loading sub module "vgahw"
[    59.543] (II) LoadModule: "vgahw"
[    59.544] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    59.544] (II) Module vgahw: vendor="X.Org Foundation"
[    59.545]     compiled for 1.8.1.902, module version = 0.1.0
[    59.545]     ABI class: X.Org Video Driver, version 7.0
[    59.545] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    59.545] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    59.545] (==) fglrx(0): Default visual is TrueColor
[    59.545] (**) fglrx(0): Option "DPMS" "true"
[    59.545] (==) fglrx(0): RGB weight 888
[    59.545] (II) fglrx(0): Using 8 bits per RGB 
[    59.545] (==) fglrx(0): Buffer Tiling is ON
[    59.545] (II) Loading sub module "fglrxdrm"
[    59.545] (II) LoadModule: "fglrxdrm"
[    59.545] (II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    59.546] ukiDynamicMajor: found major device number 253
[    59.546] ukiDynamicMajor: found major device number 253
[    59.546] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    59.546] ukiOpenDevice: node name is /dev/ati/card0
[    59.546] ukiOpenDevice: open result is 10, (OK)
[    59.546] ukiOpenByBusid: ukiOpenMinor returns 10
[    59.547] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    59.547] (==) fglrx(0): NoAccel = NO
[    59.547] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[    59.547] (--) fglrx(0): Chipset: "ATI Radeon HD 5700 Series " (Chipset = 0x68be)
[    59.547] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe138)
[    59.547] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[    59.547] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[    59.547] (--) fglrx(0): MMIO registers at 0xfbcc0000
[    59.547] (--) fglrx(0): I/O port at 0x0000c000
[    59.547] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    59.549] (II) fglrx(0): AC Adapter is used
[    59.554] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    59.642] (II) Loading sub module "vbe"
[    59.642] (II) LoadModule: "vbe"
[    59.642] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    59.643] (II) Module vbe: vendor="X.Org Foundation"
[    59.643]     compiled for 1.8.1.902, module version = 1.1.0
[    59.643]     ABI class: X.Org Video Driver, version 7.0
[    59.643] (II) fglrx(0): VESA BIOS detected
[    59.643] (II) fglrx(0): VESA VBE Version 3.0
[    59.643] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    59.643] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    59.643] (II) fglrx(0): VESA VBE OEM Software Rev: 12.19
[    59.643] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[    59.643] (II) fglrx(0): VESA VBE OEM Product: JUNIPER
[    59.643] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    59.678] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[    59.678] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[    59.678] (II) fglrx(0): PCIE card detected
[    59.678] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    59.678] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    59.679] (II) fglrx(0): Using adapter: 1:0.0.
[    59.711] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[    59.776] (II) fglrx(0): Interrupt handler installed at IRQ 38.
[    59.776] (II) fglrx(0): RandR 1.2 support is enabled!
[    59.776] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    59.776] (==) fglrx(0): Center Mode is disabled 
[    59.776] (II) Loading sub module "fb"
[    59.776] (II) LoadModule: "fb"
[    59.776] (II) Loading /usr/lib/xorg/modules/libfb.so
[    59.777] (II) Module fb: vendor="X.Org Foundation"
[    59.778]     compiled for 1.8.1.902, module version = 1.0.0
[    59.778]     ABI class: X.Org ANSI C Emulation, version 0.4
[    59.778] (II) Loading sub module "ddc"
[    59.778] (II) LoadModule: "ddc"
[    59.778] (II) Module "ddc" already built-in
[    59.973] (II) fglrx(0): Finished Initialize PPLIB!
[    59.974] (II) Loading sub module "ddc"
[    59.974] (II) LoadModule: "ddc"
[    59.974] (II) Module "ddc" already built-in
[    59.974] (II) fglrx(0): Connected Display0: DFP 4 [dfp4]
[    59.974] (II) fglrx(0): Display0 EDID data ---------------------------
[    59.974] (II) fglrx(0): Manufacturer: SAM  Model: 218  Serial#: 1296380217
[    59.974] (II) fglrx(0): Year: 2007  Week: 10
[    59.974] (II) fglrx(0): EDID Version: 1.3
[    59.974] (II) fglrx(0): Digital Display Input
[    59.974] (II) fglrx(0): Max Image Size [cm]: horiz.: 38  vert.: 30
[    59.974] (II) fglrx(0): Gamma: 2.20
[    59.974] (II) fglrx(0): DPMS capabilities: Off
[    59.974] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    59.974] (II) fglrx(0): First detailed timing is preferred mode
[    59.974] (II) fglrx(0): redX: 0.648 redY: 0.339   greenX: 0.292 greenY: 0.603
[    59.974] (II) fglrx(0): blueX: 0.143 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
[    59.974] (II) fglrx(0): Supported established timings:
[    59.974] (II) fglrx(0): 720x400@70Hz
[    59.974] (II) fglrx(0): 640x480@60Hz
[    59.974] (II) fglrx(0): 640x480@67Hz
[    59.974] (II) fglrx(0): 640x480@72Hz
[    59.974] (II) fglrx(0): 640x480@75Hz
[    59.974] (II) fglrx(0): 800x600@56Hz
[    59.974] (II) fglrx(0): 800x600@60Hz
[    59.974] (II) fglrx(0): 800x600@72Hz
[    59.974] (II) fglrx(0): 800x600@75Hz
[    59.974] (II) fglrx(0): 832x624@75Hz
[    59.975] (II) fglrx(0): 1024x768@60Hz
[    59.975] (II) fglrx(0): 1024x768@70Hz
[    59.975] (II) fglrx(0): 1024x768@75Hz
[    59.975] (II) fglrx(0): 1280x1024@75Hz
[    59.975] (II) fglrx(0): 1152x864@75Hz
[    59.975] (II) fglrx(0): Manufacturer's mask: 0
[    59.975] (II) fglrx(0): Supported standard timings:
[    59.975] (II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    59.975] (II) fglrx(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    59.975] (II) fglrx(0): #2: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    59.975] (II) fglrx(0): Supported detailed timing:
[    59.975] (II) fglrx(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
[    59.975] (II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    59.975] (II) fglrx(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    59.975] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
[    59.975] (II) fglrx(0): Monitor name: SyncMaster
[    59.975] (II) fglrx(0): Serial No: HSAP300183
[    59.975] (II) fglrx(0): EDID (in hex):
[    59.975] (II) fglrx(0):     00ffffffffffff004c2d18023931454d
[    59.975] (II) fglrx(0):     0a11010380261e782a3d85a6564a9a24
[    59.975] (II) fglrx(0):     125054bfef8081808140714f01010101
[    59.975] (II) fglrx(0):     010101010101302a009851002a403070
[    59.975] (II) fglrx(0):     1300782d1100001e000000fd00384b1e
[    59.975] (II) fglrx(0):     510e000a202020202020000000fc0053
[    59.975] (II) fglrx(0):     796e634d61737465720a2020000000ff
[    59.975] (II) fglrx(0):     00485341503330303138330a202000ce
[    59.975] (II) fglrx(0): End of Display0 EDID data --------------------
[    59.975] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[    59.975] (II) fglrx(0): Output DFP2 has no monitor section
[    59.975] (II) fglrx(0): Output DFP3 has no monitor section
[    59.975] (II) fglrx(0): Output DFP4 has no monitor section
[    59.975] (II) fglrx(0): Output CRT1 has no monitor section
[    59.975] (II) fglrx(0): Output CRT2 has no monitor section
[    59.983] (II) fglrx(0): Output DFP1 disconnected
[    59.983] (II) fglrx(0): Output DFP2 disconnected
[    59.983] (II) fglrx(0): Output DFP3 disconnected
[    59.983] (II) fglrx(0): Output DFP4 connected
[    59.983] (II) fglrx(0): Output CRT1 disconnected
[    59.983] (II) fglrx(0): Output CRT2 disconnected
[    59.983] (II) fglrx(0): Using exact sizes for initial modes
[    59.983] (II) fglrx(0): Output DFP4 using initial mode 1280x1024
[    59.983] (II) fglrx(0): DPI set to (96, 96)
[    59.983] (II) fglrx(0): Adapter ATI Radeon HD 5700 Series  has 2 configurable heads and 1 displays connected.
[    59.983] (==) fglrx(0): QBS disabled
[    59.983] (==) fglrx(0):  PseudoColor visuals disabled
[    59.983] (II) Loading sub module "ramdac"
[    59.983] (II) LoadModule: "ramdac"
[    59.983] (II) Module "ramdac" already built-in
[    59.983] (==) fglrx(0): NoDRI = NO
[    59.983] (==) fglrx(0): Capabilities: 0x00000000
[    59.983] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    59.983] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    59.983] (==) fglrx(0): UseFastTLS=0
[    59.983] (==) fglrx(0): BlockSignalsOnLock=1
[    59.983] (--) Depth 24 pixmap format is 32 bpp
[    59.983] (II) Loading extension ATIFGLRXDRI
[    59.983] (II) fglrx(0): doing swlDriScreenInit
[    59.983] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    59.983] ukiDynamicMajor: found major device number 253
[    59.984] ukiDynamicMajor: found major device number 253
[    59.984] ukiDynamicMajor: found major device number 253
[    59.984] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    59.984] ukiOpenDevice: node name is /dev/ati/card0
[    59.984] ukiOpenDevice: open result is 15, (OK)
[    59.984] ukiOpenByBusid: ukiOpenMinor returns 15
[    59.984] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    59.984] (II) fglrx(0): [uki] DRM interface version 1.0
[    59.984] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[    59.984] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    59.984] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f166691e000
[    59.984] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    59.984] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    59.984] (II) fglrx(0): swlDriScreenInit done
[    59.984] (II) fglrx(0): Kernel Module Version Information:
[    59.984] (II) fglrx(0):     Name: fglrx
[    59.984] (II) fglrx(0):     Version: 8.74.4
[    59.984] (II) fglrx(0):     Date: May 27 2010
[    59.984] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
[    59.984] (II) fglrx(0): Kernel Module version matches driver.
[    59.984] (II) fglrx(0): Kernel Module Build Time Information:
[    59.984] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.34-ARCH
[    59.984] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[    59.984] (II) fglrx(0):     Build-Kernel __SMP__:            no
[    59.984] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    59.984] (II) fglrx(0): [uki] register handle = 0x00004000
[    60.000] (II) fglrx(0): Display width adjusted to to 1664 due to alignment constraints
[    60.000] (II) fglrx(0): DRI initialization successfull!
[    60.000] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01110000
[    60.000] (II) fglrx(0): FBMM initialized for area (0,0)-(1664,2688)
[    60.000] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1664,1664) (front color buffer - assumption)
[    60.000] (II) fglrx(0): Largest offscreen area available: 1664 x 1024
[    60.001] (==) fglrx(0): Backing store disabled
[    60.001] (II) Loading extension FGLRXEXTENSION
[    60.001] (**) fglrx(0): DPMS enabled
[    60.001] (II) fglrx(0): Initialized in-driver Xinerama extension
[    60.001] (**) fglrx(0): Textured Video is enabled.
[    60.001] (II) LoadModule: "glesx"
[    60.002] (II) Loading /usr/lib/xorg/modules/glesx.so
[    60.017] (II) Module glesx: vendor="X.Org Foundation"
[    60.017]     compiled for 1.7.1, module version = 1.0.0
[    60.017] (II) Loading extension GLESX
[    60.017] (II) fglrx(0): GLESX enableFlags = 592
[    60.017] (II) fglrx(0): GLESX is enabled
[    60.017] (II) fglrx(0): Acceleration enabled
[    60.017] (II) LoadModule: "amdxmm"
[    60.017] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[    60.019] (II) Module amdxmm: vendor="X.Org Foundation"
[    60.019]     compiled for 1.7.1, module version = 1.0.0
[    60.020] (II) Loading extension AMDXVOPL
[    60.022] (II) fglrx(0): UVD2 feature is available
[    60.023] (II) fglrx(0): Enable composite support successfully
[    60.023] (WW) fglrx(0): Option "VendorName" is not used
[    60.023] (WW) fglrx(0): Option "ModelName" is not used
[    60.023] (II) fglrx(0): X context handle = 0x1
[    60.023] (II) fglrx(0): [DRI] installation complete
[    60.023] (==) fglrx(0): Silken mouse enabled
[    60.024] (==) fglrx(0): Using HW cursor of display infrastructure!
[    60.024] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    60.137] (--) RandR disabled
[    60.137] (II) Initializing built-in extension Generic Event Extension
[    60.137] (II) Initializing built-in extension SHAPE
[    60.137] (II) Initializing built-in extension MIT-SHM
[    60.137] (II) Initializing built-in extension XInputExtension
[    60.137] (II) Initializing built-in extension XTEST
[    60.137] (II) Initializing built-in extension BIG-REQUESTS
[    60.137] (II) Initializing built-in extension SYNC
[    60.137] (II) Initializing built-in extension XKEYBOARD
[    60.137] (II) Initializing built-in extension XC-MISC
[    60.137] (II) Initializing built-in extension SECURITY
[    60.137] (II) Initializing built-in extension XINERAMA
[    60.137] (II) Initializing built-in extension XFIXES
[    60.137] (II) Initializing built-in extension RENDER
[    60.137] (II) Initializing built-in extension RANDR
[    60.137] (II) Initializing built-in extension COMPOSITE
[    60.137] (II) Initializing built-in extension DAMAGE
[    60.139] ukiDynamicMajor: found major device number 253
[    60.139] ukiDynamicMajor: found major device number 253
[    60.139] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    60.139] ukiOpenDevice: node name is /dev/ati/card0
[    60.139] ukiOpenDevice: open result is 16, (OK)
[    60.139] ukiOpenByBusid: ukiOpenMinor returns 16
[    60.139] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    60.280] (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
[    60.280] (II) GLX: Initialized DRI GL provider for screen 0
[    60.298] (II) fglrx(0): Enable the clock gating!
[    60.298] (II) fglrx(0): Setting screen physical size to 338 x 270
[    60.401] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    60.401] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    60.401] (II) LoadModule: "evdev"
[    60.402] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    60.403] (II) Module evdev: vendor="X.Org Foundation"
[    60.403]     compiled for 1.8.0, module version = 2.4.0
[    60.403]     Module class: X.Org XInput Driver
[    60.403]     ABI class: X.Org XInput driver, version 9.0
[    60.403] (**) Power Button: always reports core events
[    60.403] (**) Power Button: Device: "/dev/input/event1"
[    60.416] (II) Power Button: Found keys
[    60.416] (II) Power Button: Configuring as keyboard
[    60.416] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    60.416] (**) Option "xkb_rules" "evdev"
[    60.416] (**) Option "xkb_model" "evdev"
[    60.416] (**) Option "xkb_layout" "de"
[    60.416] (**) Option "xkb_variant" "nodeadkeys"
[    60.443] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    60.443] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    60.443] (**) Power Button: always reports core events
[    60.443] (**) Power Button: Device: "/dev/input/event0"
[    60.456] (II) Power Button: Found keys
[    60.456] (II) Power Button: Configuring as keyboard
[    60.456] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    60.456] (**) Option "xkb_rules" "evdev"
[    60.456] (**) Option "xkb_model" "evdev"
[    60.456] (**) Option "xkb_layout" "de"
[    60.456] (**) Option "xkb_variant" "nodeadkeys"
[    60.458] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
[    60.458] (II) No input driver/identifier specified (ignoring)
[    60.460] (II) config/udev: Adding input device Razer Razer Diamondback 3G (/dev/input/event4)
[    60.460] (**) Razer Razer Diamondback 3G: Applying InputClass "evdev pointer catchall"
[    60.460] (**) Razer Razer Diamondback 3G: always reports core events
[    60.460] (**) Razer Razer Diamondback 3G: Device: "/dev/input/event4"
[    60.483] (II) Razer Razer Diamondback 3G: Found 11 mouse buttons
[    60.483] (II) Razer Razer Diamondback 3G: Found scroll wheel(s)
[    60.483] (II) Razer Razer Diamondback 3G: Found relative axes
[    60.483] (II) Razer Razer Diamondback 3G: Found x and y relative axes
[    60.483] (II) Razer Razer Diamondback 3G: Configuring as mouse
[    60.483] (**) Razer Razer Diamondback 3G: YAxisMapping: buttons 4 and 5
[    60.483] (**) Razer Razer Diamondback 3G: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    60.483] (II) XINPUT: Adding extended input device "Razer Razer Diamondback 3G" (type: MOUSE)
[    60.483] (**) Razer Razer Diamondback 3G: (accel) keeping acceleration scheme 1
[    60.483] (**) Razer Razer Diamondback 3G: (accel) acceleration profile 0
[    60.483] (**) Razer Razer Diamondback 3G: (accel) acceleration factor: 2.000
[    60.483] (**) Razer Razer Diamondback 3G: (accel) acceleration threshold: 4
[    60.483] (II) Razer Razer Diamondback 3G: initialized for relative axes.
[    60.483] (II) config/udev: Adding input device Razer Razer Diamondback 3G (/dev/input/mouse0)
[    60.483] (II) No input driver/identifier specified (ignoring)
[    60.484] (II) config/udev: Adding input device   wired keyboard (/dev/input/event5)
[    60.484] (**)   wired keyboard: Applying InputClass "evdev keyboard catchall"
[    60.484] (**)   wired keyboard: always reports core events
[    60.484] (**)   wired keyboard: Device: "/dev/input/event5"
[    60.510] (II)   wired keyboard: Found keys
[    60.510] (II)   wired keyboard: Configuring as keyboard
[    60.510] (II) XINPUT: Adding extended input device "  wired keyboard" (type: KEYBOARD)
[    60.510] (**) Option "xkb_rules" "evdev"
[    60.510] (**) Option "xkb_model" "evdev"
[    60.510] (**) Option "xkb_layout" "de"
[    60.510] (**) Option "xkb_variant" "nodeadkeys"
[    60.510] (II) config/udev: Adding input device   wired keyboard (/dev/input/event6)
[    60.510] (**)   wired keyboard: Applying InputClass "evdev keyboard catchall"
[    60.510] (**)   wired keyboard: always reports core events
[    60.510] (**)   wired keyboard: Device: "/dev/input/event6"
[    60.536] (II)   wired keyboard: Found 1 mouse buttons
[    60.536] (II)   wired keyboard: Found scroll wheel(s)
[    60.536] (II)   wired keyboard: Found relative axes
[    60.536] (II)   wired keyboard: Found absolute axes
[    60.536] (II)   wired keyboard: Found keys
[    60.536] (II)   wired keyboard: Configuring as mouse
[    60.536] (II)   wired keyboard: Configuring as keyboard
[    60.536] (**)   wired keyboard: YAxisMapping: buttons 4 and 5
[    60.536] (**)   wired keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    60.536] (II) XINPUT: Adding extended input device "  wired keyboard" (type: KEYBOARD)
[    60.536] (**) Option "xkb_rules" "evdev"
[    60.536] (**) Option "xkb_model" "evdev"
[    60.536] (**) Option "xkb_layout" "de"
[    60.536] (**) Option "xkb_variant" "nodeadkeys"
[    60.536] (EE)   wired keyboard: failed to initialize for relative axes.
[    60.537] (II)   wired keyboard: initialized for absolute axes.
[    60.538] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[    60.538] (II) No input driver/identifier specified (ignoring)
[    60.546] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    65.903] (II) Power Button: Close
[    65.904] (II) UnloadModule: "evdev"
[    65.930] (II) Power Button: Close
[    65.930] (II) UnloadModule: "evdev"
[    65.980] (II) Razer Razer Diamondback 3G: Close
[    65.980] (II) UnloadModule: "evdev"
[    66.010] (II)   wired keyboard: Close
[    66.010] (II) UnloadModule: "evdev"
[    66.033] (II)   wired keyboard: Close
[    66.033] (II) UnloadModule: "evdev"
[    66.036] (II) fglrx(0): Shutdown CMMQS
[    66.036] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[    66.036] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x2000 at 0x7f166691e000
[    66.077] (II) fglrx(0): Interrupt handler Shutdown.

everything alright?
thanks again dude

Last edited by o'neill (2010-07-01 15:18:35)

maevius · 2010-07-01 15:21:03

Can someone with catalyst 10.6 post their xorg.conf? I'm dealing with some freezes lately and I'm checking some things. Thanks.

Arch Linux

#2051 2010-06-25 14:01:37

Re: The AMD/ATI Bar & Grill

#2052 2010-06-25 14:38:37

Re: The AMD/ATI Bar & Grill

#2053 2010-06-27 04:44:13

Re: The AMD/ATI Bar & Grill

#2054 2010-06-27 22:20:53

Re: The AMD/ATI Bar & Grill

#2055 2010-06-28 04:51:12

Re: The AMD/ATI Bar & Grill

#2056 2010-06-28 10:37:20

Re: The AMD/ATI Bar & Grill

#2057 2010-06-28 12:23:49

Re: The AMD/ATI Bar & Grill

#2058 2010-06-28 14:18:56

Re: The AMD/ATI Bar & Grill

#2059 2010-06-28 14:36:13

Re: The AMD/ATI Bar & Grill

#2060 2010-06-29 15:28:13

Re: The AMD/ATI Bar & Grill

#2061 2010-06-30 16:48:38

Re: The AMD/ATI Bar & Grill

#2062 2010-06-30 20:26:58

Re: The AMD/ATI Bar & Grill

#2063 2010-06-30 20:42:51

Re: The AMD/ATI Bar & Grill

#2064 2010-06-30 21:03:15

Re: The AMD/ATI Bar & Grill

#2065 2010-06-30 21:11:29

Re: The AMD/ATI Bar & Grill

#2066 2010-07-01 02:02:56

Re: The AMD/ATI Bar & Grill

#2067 2010-07-01 11:31:26

Re: The AMD/ATI Bar & Grill

#2068 2010-07-01 11:44:02

Re: The AMD/ATI Bar & Grill

#2069 2010-07-01 12:34:01

Re: The AMD/ATI Bar & Grill

#2070 2010-07-01 12:54:26

Re: The AMD/ATI Bar & Grill

#2071 2010-07-01 13:01:31

Re: The AMD/ATI Bar & Grill

#2072 2010-07-01 13:23:45

Re: The AMD/ATI Bar & Grill

#2073 2010-07-01 13:42:21

Re: The AMD/ATI Bar & Grill

#2074 2010-07-01 14:33:44

Re: The AMD/ATI Bar & Grill

#2075 2010-07-01 15:21:03

Re: The AMD/ATI Bar & Grill

Board footer