You are not logged in.
- Topics: Active | Unanswered
#1 2010-06-30 07:28:56
- sie
- Member
- From: Latvia
- Registered: 2010-06-30
- Posts: 33
[SOLVED] Xorg problems.. :/
I've got nouveau-dri, libgl. All the nvidia modules are unloaded and nouveau ones are loaded.
xorg-server 1.8.1.902-1
nouveau-dri 7.8.2-1
libgl 7.8.2-1
Also I've got these xf86-input- pkgs:
local/xf86-input-evdev 2.4.0-1 (xorg-input-drivers)
X.org evdev input driver
local/xf86-input-keyboard 1.4.0-2 (xorg-input-drivers)
X.Org keyboard input driver
local/xf86-input-mouse 1.5.0-2 (xorg-input-drivers)
X.org mouse input driver
local/xf86-input-vmmouse 12.6.7-1 (xorg-input-drivers)
X.org VMWare Mouse input driverWhen I startx, mpd keeps on playing, but mouse and keyboard is not working.
lspci:
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 4000] (rev c1)Also the xorg.conf device section thing's in place.
Last edited by sie (2010-07-02 06:15:05)
a & ☭
Offline
#2 2010-06-30 08:25:17
- toffyrn
- Member
- Registered: 2008-10-07
- Posts: 221
Re: [SOLVED] Xorg problems.. :/
What happens if you try with default (ie. no xorg.conf)?
Offline
#3 2010-06-30 09:48:03
- sie
- Member
- From: Latvia
- Registered: 2010-06-30
- Posts: 33
Re: [SOLVED] Xorg problems.. :/
Same thing. I tried to do it w/o xorg.conf, at first. I added it only after I saw nothing was working.
I had nvidia's binary .run thing installed before, if that changes anything.
Last edited by sie (2010-06-30 09:48:35)
a & ☭
Offline
#4 2010-06-30 10:06:59
- JackH79
- Member
- From: Australia
- Registered: 2009-06-18
- Posts: 663
- Website
Re: [SOLVED] Xorg problems.. :/
Xorg.0.log might be helpful.
Offline
#5 2010-06-30 11:58:27
- sie
- Member
- From: Latvia
- Registered: 2010-06-30
- Posts: 33
Offline
#6 2010-06-30 12:37:39
- eldragon
- Member
- From: Buenos Aires
- Registered: 2008-11-18
- Posts: 1,029
Re: [SOLVED] Xorg problems.. :/
Xorg.0.log: http://omploader.org/vNHNsNA
too bad its loading the vesa driver instead of the nouveau one.
, run X -configure as root, and then edit the new xorg.conf file and replace the "vesa" part for "nouveau"
that should do the trick, especially if you have kms enabled.
Offline
#7 2010-06-30 20:13:10
- sie
- Member
- From: Latvia
- Registered: 2010-06-30
- Posts: 33
Re: [SOLVED] Xorg problems.. :/
Why is X -configure failing? It outputted: http://dpaste.com/213349/
Btw I uninstalled vesa, cause I thought it might be messing something up, but nothing's still working. 
a & ☭
Offline
#8 2010-06-30 20:49:12
- eldragon
- Member
- From: Buenos Aires
- Registered: 2008-11-18
- Posts: 1,029
Re: [SOLVED] Xorg problems.. :/
Why is X -configure failing? It outputted: http://dpaste.com/213349/
Btw I uninstalled vesa, cause I thought it might be messing something up, but nothing's still working.
remove nouveau, install vesa, have xorg configure vesa, and then simply replace the driver 
btw. you should have KMS enabled.
Offline
#9 2010-06-30 21:17:14
- sie
- Member
- From: Latvia
- Registered: 2010-06-30
- Posts: 33
Re: [SOLVED] Xorg problems.. :/
If my tty got really huge does that mean I've KMS enabled?
a & ☭
Offline
#10 2010-06-30 21:33:12
- toffyrn
- Member
- Registered: 2008-10-07
- Posts: 221
Re: [SOLVED] Xorg problems.. :/
yep. Higher resolution (and therefore smaller fonts) means KMS is enabled
Offline
#11 2010-07-02 06:14:50
- sie
- Member
- From: Latvia
- Registered: 2010-06-30
- Posts: 33
Re: [SOLVED] Xorg problems.. :/
Thanks! It worked. Configured with vesa, then installed xf86-video-nouveau, nouveau-dri, libgl and it started and mouse/keybd is working.
Teeworlds aren't running as great as I expected, though. ;-D
a & ☭
Offline