Arch Linux

geekux

Member

Registered: 2005-01-09

Posts: 4

Problem with udev 160 & smat card reader

Hello,

yesterday I updated to udev 160. Before the update, my card reader (Reiner SCT cyberJack pinpad(a)) worked just fine.

Since the upate, however, when I plug in the reader, the following messages are spawned to the system log:

Jul 17 10:56:33 somehost kernel: usb 3-1: USB disconnect, address 4
Jul 17 10:56:39 somehost kernel: usb 3-1: new full speed USB device using ohci_hcd and address 5
Jul 17 10:56:39 somehost load-modules.sh: 'usb:v0C4Bp0300d0100dc00dsc00dp00icFFisc00ip00' is not a valid module or alias name

I don't know what that means/where to investigate. The reader stopped working, of course.

The udev rules for this specific USB device are still in place (although they have nothing to do with the actual module loading):

lsusb

Bus 003 Device 005: ID 0c4b:0300 Reiner SCT Kartensysteme GmbH cyberJack pinpad(a)

/etc/udev/rules.d/99-cyberjack.rules

ACTION=="add", SUBSYSTEM=="usb", ENV{PRODUCT}=="c4b/300/*", RUN+="/sbin/udev.cyberjack.sh"

Any help on this issue would be appreciated!

--geekux

Last edited by geekux (2010-07-17 09:13:47)