You are not logged in.
- Topics: Active | Unanswered
#1 2010-07-24 00:53:17
- AC8FP
- Member
- From: EM79vr
- Registered: 2010-07-24
- Posts: 2
Xorg 1.8.1.902 & Catalyst 10.6-5 & Mobility Radeon HD 2600
Hello all,
I'm reporting in with an error that I can't seem to shake since the Xorg 1.8 and Catalyst 10.6 release. I have been unable to get the two to place nice with the Mobility Radeon HD 2600 in my HP Compaq 8510p notebook. I've followed the instructions on the Arch ATI Catalyst wiki using the repository approach. Everything installs correctly and I've configured the xorg.conf as instructed in the wiki. I actually just delete the existing xorg.conf and run aticonfig --initial, but still no dice. I've made sure that I have the fglrx module loaded in my rc.conf.
When GDM tries to start, it freaks out with the screen flashing a few times and then crashes saying too many attempts to start X. I login and try to start X manually and it produces the following log file:
[ 24.874]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 24.874]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 24.874] X Protocol Version 11, Revision 0
[ 24.874] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 24.874] Current Operating System: Linux gizmo 2.6.34-ARCH #1 SMP PREEMPT Mon Jul 5 22:12:11 CEST 2010 x86_64
[ 24.874] Kernel command line: root=/dev/disk/by-uuid/56888501-5e9b-4251-8d84-20eee8a125ce ro nomodeset
[ 24.875] Build Date: 21 June 2010 12:01:49PM
[ 24.875]
[ 24.875] Current version of pixman: 0.18.2
[ 24.875] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 24.875] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24.875] (==) Log file: "/var/log/Xorg.1.log", Time: Fri Jul 23 19:47:16 2010
[ 24.875] (==) Using config file: "/etc/X11/xorg.conf"
[ 24.876] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 24.876] (==) ServerLayout "aticonfig Layout"
[ 24.876] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 24.876] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 24.876] (**) | |-->Device "aticonfig-Device[0]-0"
[ 24.876] (==) Automatically adding devices
[ 24.877] (==) Automatically enabling devices
[ 24.877] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 24.877] Entry deleted from font path.
[ 24.877] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 24.877] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 24.877] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 24.877] (II) Loader magic: 0x7ce880
[ 24.877] (II) Module ABI versions:
[ 24.877] X.Org ANSI C Emulation: 0.4
[ 24.877] X.Org Video Driver: 7.0
[ 24.877] X.Org XInput driver : 9.0
[ 24.877] X.Org Server Extension : 3.0
[ 24.888] (--) PCI:*(0:1:0:0) 1002:9581:103c:30c5 ATI Technologies Inc M76 [Radeon Mobility HD 2600 Series] rev 0, Mem @ 0xd0000000/268435456, 0xe4400000/65536, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[ 24.888] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 24.888] (II) "extmod" will be loaded by default.
[ 24.888] (II) "dbe" will be loaded by default.
[ 24.888] (II) "glx" will be loaded by default.
[ 24.888] (II) "record" will be loaded by default.
[ 24.888] (II) "dri" will be loaded by default.
[ 24.888] (II) "dri2" will be loaded by default.
[ 24.888] (II) LoadModule: "extmod"
[ 24.888] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 24.888] (II) Module extmod: vendor="X.Org Foundation"
[ 24.888] compiled for 1.8.1.902, module version = 1.0.0
[ 24.888] Module class: X.Org Server Extension
[ 24.888] ABI class: X.Org Server Extension, version 3.0
[ 24.888] (II) Loading extension MIT-SCREEN-SAVER
[ 24.888] (II) Loading extension XFree86-VidModeExtension
[ 24.888] (II) Loading extension XFree86-DGA
[ 24.888] (II) Loading extension DPMS
[ 24.888] (II) Loading extension XVideo
[ 24.888] (II) Loading extension XVideo-MotionCompensation
[ 24.888] (II) Loading extension X-Resource
[ 24.888] (II) LoadModule: "dbe"
[ 24.888] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 24.888] (II) Module dbe: vendor="X.Org Foundation"
[ 24.888] compiled for 1.8.1.902, module version = 1.0.0
[ 24.888] Module class: X.Org Server Extension
[ 24.889] ABI class: X.Org Server Extension, version 3.0
[ 24.889] (II) Loading extension DOUBLE-BUFFER
[ 24.889] (II) LoadModule: "glx"
[ 24.889] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 24.889] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 24.889] compiled for 7.5.0, module version = 1.0.0
[ 24.889] (II) Loading extension GLX
[ 24.889] (II) LoadModule: "record"
[ 24.889] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 24.889] (II) Module record: vendor="X.Org Foundation"
[ 24.889] compiled for 1.8.1.902, module version = 1.13.0
[ 24.889] Module class: X.Org Server Extension
[ 24.889] ABI class: X.Org Server Extension, version 3.0
[ 24.889] (II) Loading extension RECORD
[ 24.889] (II) LoadModule: "dri"
[ 24.889] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 24.889] (II) Module dri: vendor="X.Org Foundation"
[ 24.889] compiled for 1.8.1.902, module version = 1.0.0
[ 24.889] ABI class: X.Org Server Extension, version 3.0
[ 24.889] (II) Loading extension XFree86-DRI
[ 24.889] (II) LoadModule: "dri2"
[ 24.889] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 24.889] (II) Module dri2: vendor="X.Org Foundation"
[ 24.889] compiled for 1.8.1.902, module version = 1.2.0
[ 24.889] ABI class: X.Org Server Extension, version 3.0
[ 24.889] (II) Loading extension DRI2
[ 24.890] (II) LoadModule: "fglrx"
[ 24.890] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 24.898] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 24.898] compiled for 1.7.1, module version = 8.74.4
[ 24.898] Module class: X.Org Video Driver
[ 24.898] (II) Loading sub module "fglrxdrm"
[ 24.899] (II) LoadModule: "fglrxdrm"
[ 24.899] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 24.899] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 24.899] compiled for 1.7.1, module version = 8.74.4
[ 24.899] (II) ATI Proprietary Linux Driver Version Identifier:8.74.4
[ 24.899] (II) ATI Proprietary Linux Driver Release Identifier: 8.741
[ 24.899] (II) ATI Proprietary Linux Driver Build Date: May 27 2010 12:52:57
[ 24.899] (--) using VT number 7
[ 24.900] (II) Primary Device is: PCI 01@00:00:0
[ 24.900] (WW) Falling back to old probe method for fglrx
[ 24.904] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 24.904] (--) Chipset Supported AMD Graphics Processor (0x9581) found
[ 24.905] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 24.905] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 24.905] (II) AMD Video driver is signed
[ 24.905] (II) fglrx(0): pEnt->device->identifier=0x1dcbc70
[ 24.905] (II) fglrx(0): === [atiddxPreInit] === begin
[ 24.905] (II) Loading sub module "vgahw"
[ 24.905] (II) LoadModule: "vgahw"
[ 24.905] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 24.905] (II) Module vgahw: vendor="X.Org Foundation"
[ 24.905] compiled for 1.8.1.902, module version = 0.1.0
[ 24.905] ABI class: X.Org Video Driver, version 7.0
[ 24.905] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 24.905] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 24.905] (==) fglrx(0): Default visual is TrueColor
[ 24.905] (**) fglrx(0): Option "DPMS" "true"
[ 24.905] (==) fglrx(0): RGB weight 888
[ 24.905] (II) fglrx(0): Using 8 bits per RGB
[ 24.905] (==) fglrx(0): Buffer Tiling is ON
[ 24.905] (II) Loading sub module "fglrxdrm"
[ 24.905] (II) LoadModule: "fglrxdrm"
[ 24.906] (II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 24.907] ukiDynamicMajor: found major device number 253
[ 24.907] ukiDynamicMajor: found major device number 253
[ 24.907] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 24.907] ukiOpenDevice: node name is /dev/ati/card0
[ 24.907] ukiOpenDevice: open result is 10, (OK)
[ 24.907] ukiOpenByBusid: ukiOpenMinor returns 10
[ 24.907] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 24.907] (==) fglrx(0): NoAccel = NO
[ 24.907] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 24.907] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 2600" (Chipset = 0x9581)
[ 24.907] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x30c5)
[ 24.907] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 24.907] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 24.907] (--) fglrx(0): MMIO registers at 0xe4400000
[ 24.907] (--) fglrx(0): I/O port at 0x00004000
[ 24.907] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 24.907] (II) fglrx(0): AC Adapter is used
[ 24.909] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 25.033] (II) Loading sub module "vbe"
[ 25.033] (II) LoadModule: "vbe"
[ 25.033] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 25.033] (II) Module vbe: vendor="X.Org Foundation"
[ 25.033] compiled for 1.8.1.902, module version = 1.1.0
[ 25.033] ABI class: X.Org Video Driver, version 7.0
[ 25.033] (II) fglrx(0): VESA BIOS detected
[ 25.033] (II) fglrx(0): VESA VBE Version 3.0
[ 25.033] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 25.033] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 25.033] (II) fglrx(0): VESA VBE OEM Software Rev: 10.56
[ 25.033] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 25.033] (II) fglrx(0): VESA VBE OEM Product: M76M
[ 25.033] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 25.063] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 25.063] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
[ 25.063] (II) fglrx(0): PCIE card detected
[ 25.063] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 25.063] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 25.065] (II) fglrx(0): Using adapter: 1:0.0.
[ 25.097] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
[ 25.129] (II) fglrx(0): Interrupt handler installed at IRQ 33.
[ 25.129] (II) fglrx(0): RandR 1.2 support is enabled!
[ 25.129] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 25.129] (==) fglrx(0): Center Mode is disabled
[ 25.129] (II) Loading sub module "fb"
[ 25.129] (II) LoadModule: "fb"
[ 25.129] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 25.129] (II) Module fb: vendor="X.Org Foundation"
[ 25.129] compiled for 1.8.1.902, module version = 1.0.0
[ 25.129] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.129] (II) Loading sub module "ddc"
[ 25.129] (II) LoadModule: "ddc"
[ 25.129] (II) Module "ddc" already built-in
[ 25.395] (II) fglrx(0): Finished Initialize PPLIB!
[ 25.397] (II) Loading sub module "ddc"
[ 25.397] (II) LoadModule: "ddc"
[ 25.397] (II) Module "ddc" already built-in
[ 25.397] (II) fglrx(0): Connected Display0: LCD on internal LVDS [lvds]
[ 25.397] (II) fglrx(0): Display0 EDID data ---------------------------
[ 25.397] (II) fglrx(0): Manufacturer: CMO Model: 1520 Serial#: 0
[ 25.397] (II) fglrx(0): Year: 1990 Week: 0
[ 25.397] (II) fglrx(0): EDID Version: 1.3
[ 25.397] (II) fglrx(0): Digital Display Input
[ 25.397] (II) fglrx(0): Max Image Size [cm]: horiz.: 33 vert.: 20
[ 25.397] (II) fglrx(0): Gamma: 2.20
[ 25.397] (II) fglrx(0): No DPMS capabilities specified
[ 25.397] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 25.397] (II) fglrx(0): First detailed timing is preferred mode
[ 25.397] (II) fglrx(0): redX: 0.626 redY: 0.354 greenX: 0.294 greenY: 0.589
[ 25.397] (II) fglrx(0): blueX: 0.144 blueY: 0.097 whiteX: 0.309 whiteY: 0.329
[ 25.397] (II) fglrx(0): Manufacturer's mask: 0
[ 25.397] (II) fglrx(0): Supported detailed timing:
[ 25.397] (II) fglrx(0): clock: 131.5 MHz Image Size: 331 x 207 mm
[ 25.397] (II) fglrx(0): h_active: 1680 h_sync: 1771 h_sync_end 1831 h_blank_end 1978 h_border: 0
[ 25.397] (II) fglrx(0): v_active: 1050 v_sync: 1056 v_sync_end 1068 v_blanking: 1108 v_border: 0
[ 25.397] (II) fglrx(0): N154Z1-L01
[ 25.397] (II) fglrx(0): CMO
[ 25.397] (II) fglrx(0): N154Z1-L01
[ 25.397] (II) fglrx(0): EDID (in hex):
[ 25.397] (II) fglrx(0): 00ffffffffffff000daf201500000000
[ 25.397] (II) fglrx(0): 00000103802114780a77f1a05a4b9624
[ 25.397] (II) fglrx(0): 184f5400000001010101010101010101
[ 25.397] (II) fglrx(0): 0101010101015e33902a611a3a405b3c
[ 25.397] (II) fglrx(0): 6c004bcf10000018000000fe004e3135
[ 25.397] (II) fglrx(0): 345a312d4c30310a2020000000fe0043
[ 25.397] (II) fglrx(0): 4d4f0a202020202020202020000000fe
[ 25.397] (II) fglrx(0): 004e3135345a312d4c30310a202000f2
[ 25.397] (II) fglrx(0): End of Display0 EDID data --------------------
[ 25.397] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 25.397] (II) fglrx(0): Output DFP1 has no monitor section
[ 25.397] (II) fglrx(0): Output DFP2 has no monitor section
[ 25.397] (II) fglrx(0): Output CRT1 has no monitor section
[ 25.397] (II) fglrx(0): Output TV has no monitor section
[ 25.397] (II) fglrx(0): Output COMPONENT_VIDEO has no monitor section
[ 25.552] (II) fglrx(0): EDID vendor "CMO", prod id 5408
[ 25.552] (II) fglrx(0): Printing DDC gathered Modelines:
[ 25.553] (II) fglrx(0): Modeline "1680x1050"x0.0 131.50 1680 1771 1831 1978 1050 1056 1068 1108 -hsync -vsync (66.5 kHz)
[ 25.553] (II) fglrx(0): Output LVDS connected
[ 25.553] (II) fglrx(0): Output DFP1 disconnected
[ 25.553] (II) fglrx(0): Output DFP2 disconnected
[ 25.553] (II) fglrx(0): Output CRT1 disconnected
[ 25.553] (II) fglrx(0): Output TV disconnected
[ 25.553] (II) fglrx(0): Output COMPONENT_VIDEO disconnected
[ 25.553] (II) fglrx(0): Using exact sizes for initial modes
[ 25.553] (II) fglrx(0): Output LVDS using initial mode 1680x1050
[ 25.553] (II) fglrx(0): Display dimensions: (330, 200) mm
[ 25.553] (II) fglrx(0): DPI set to (129, 133)
[ 25.553] (II) fglrx(0): Adapter ATI Mobility Radeon HD 2600 has 2 configurable heads and 1 displays connected.
[ 25.553] (==) fglrx(0): QBS disabled
[ 25.553] (==) fglrx(0): PseudoColor visuals disabled
[ 25.553] (II) Loading sub module "ramdac"
[ 25.553] (II) LoadModule: "ramdac"
[ 25.553] (II) Module "ramdac" already built-in
[ 25.553] (==) fglrx(0): NoDRI = NO
[ 25.553] (==) fglrx(0): Capabilities: 0x00000000
[ 25.553] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 25.553] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 25.553] (==) fglrx(0): UseFastTLS=0
[ 25.553] (==) fglrx(0): BlockSignalsOnLock=1
[ 25.553] (--) Depth 24 pixmap format is 32 bpp
[ 25.553] (II) Loading extension ATIFGLRXDRI
[ 25.553] (II) fglrx(0): doing swlDriScreenInit
[ 25.553] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 25.553] ukiDynamicMajor: found major device number 253
[ 25.553] ukiDynamicMajor: found major device number 253
[ 25.553] ukiDynamicMajor: found major device number 253
[ 25.553] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 25.553] ukiOpenDevice: node name is /dev/ati/card0
[ 25.553] ukiOpenDevice: open result is 15, (OK)
[ 25.553] ukiOpenByBusid: ukiOpenMinor returns 15
[ 25.553] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 25.553] (II) fglrx(0): [uki] DRM interface version 1.0
[ 25.553] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 25.553] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x10000
[ 25.553] (II) fglrx(0): [uki] mapped SAREA 0x10000 to 0x7f2043e35000
[ 25.553] (II) fglrx(0): [uki] framebuffer handle = 0x11000
[ 25.554] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 25.554] (II) fglrx(0): swlDriScreenInit done
[ 25.554] (II) fglrx(0): Kernel Module Version Information:
[ 25.554] (II) fglrx(0): Name: fglrx
[ 25.554] (II) fglrx(0): Version: 8.74.4
[ 25.554] (II) fglrx(0): Date: May 27 2010
[ 25.554] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 25.554] (II) fglrx(0): Kernel Module version matches driver.
[ 25.554] (II) fglrx(0): Kernel Module Build Time Information:
[ 25.554] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.34-ARCH
[ 25.554] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 25.554] (II) fglrx(0): Build-Kernel __SMP__: no
[ 25.554] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 25.554] (II) fglrx(0): [uki] register handle = 0x00012000
[ 25.571] (II) fglrx(0): Display width adjusted to to 1792 due to alignment constraints
[ 25.571] (II) fglrx(0): DRI initialization successfull!
[ 25.571] (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x010a0000
[ 25.571] (II) fglrx(0): FBMM initialized for area (0,0)-(1792,2432)
[ 25.571] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1792,1792) (front color buffer - assumption)
[ 25.571] (II) fglrx(0): Largest offscreen area available: 1792 x 640
[ 25.571] (==) fglrx(0): Backing store disabled
[ 25.571] (II) Loading extension FGLRXEXTENSION
[ 25.572] (**) fglrx(0): DPMS enabled
[ 25.572] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 25.572] (**) fglrx(0): Textured Video is enabled.
[ 25.572] (II) LoadModule: "glesx"
[ 25.572] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 25.572] (II) Module glesx: vendor="X.Org Foundation"
[ 25.572] compiled for 1.7.1, module version = 1.0.0
[ 25.573] (II) Loading extension GLESX
[ 25.573] (II) fglrx(0): GLESX enableFlags = 592
[ 25.573] (II) fglrx(0): GLESX is enabled
[ 25.573] (II) fglrx(0): Acceleration enabled
[ 25.573] (II) LoadModule: "amdxmm"
[ 25.573] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 25.573] (II) Module amdxmm: vendor="X.Org Foundation"
[ 25.573] compiled for 1.7.1, module version = 1.0.0
[ 25.573] (II) Loading extension AMDXVOPL
[ 25.575] (II) fglrx(0): UVD2 feature is available
[ 25.577] (II) fglrx(0): Enable composite support successfully
[ 25.577] (WW) fglrx(0): Option "VendorName" is not used
[ 25.577] (WW) fglrx(0): Option "ModelName" is not used
[ 25.577] (II) fglrx(0): X context handle = 0x1
[ 25.577] (II) fglrx(0): [DRI] installation complete
[ 25.577] (==) fglrx(0): Silken mouse enabled
[ 25.577] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 25.577] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 25.577] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 25.577] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 25.579] (II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
[ 25.579] (II) fglrx(0): Cannot set TV horizontal size.
[ 25.579] (II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed.
[ 25.579] (II) fglrx(0): Cannot set TV horizontal position.
[ 25.579] (II) fglrx(0): Cannot set TV vertical position.
[ 25.614] (--) RandR disabled
[ 25.614] (II) Initializing built-in extension Generic Event Extension
[ 25.614] (II) Initializing built-in extension SHAPE
[ 25.614] (II) Initializing built-in extension MIT-SHM
[ 25.614] (II) Initializing built-in extension XInputExtension
[ 25.614] (II) Initializing built-in extension XTEST
[ 25.614] (II) Initializing built-in extension BIG-REQUESTS
[ 25.614] (II) Initializing built-in extension SYNC
[ 25.614] (II) Initializing built-in extension XKEYBOARD
[ 25.614] (II) Initializing built-in extension XC-MISC
[ 25.614] (II) Initializing built-in extension SECURITY
[ 25.614] (II) Initializing built-in extension XINERAMA
[ 25.614] (II) Initializing built-in extension XFIXES
[ 25.614] (II) Initializing built-in extension RENDER
[ 25.614] (II) Initializing built-in extension RANDR
[ 25.614] (II) Initializing built-in extension COMPOSITE
[ 25.614] (II) Initializing built-in extension DAMAGE
[ 25.616] ukiDynamicMajor: found major device number 253
[ 25.616] ukiDynamicMajor: found major device number 253
[ 25.616] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 25.616] ukiOpenDevice: node name is /dev/ati/card0
[ 25.616] ukiOpenDevice: open result is 16, (OK)
[ 25.616] ukiOpenByBusid: ukiOpenMinor returns 16
[ 25.616] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 25.661]
Backtrace:
[ 25.661] 0: /usr/bin/Xorg (xorg_backtrace+0x28) [0x498588]
[ 25.661] 1: /usr/bin/Xorg (0x400000+0x672d9) [0x4672d9]
[ 25.661] 2: /lib/libpthread.so.0 (0x7f2043180000+0xf1c0) [0x7f204318f1c0]
[ 25.661] Segmentation fault at address (nil)
[ 25.661]
Fatal server error:
[ 25.661] Caught signal 11 (Segmentation fault). Server aborting
[ 25.661]
[ 25.661]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 25.661] Please also check the log file at "/var/log/Xorg.1.log" for additional information.
[ 25.661]
[ 25.661] (II) fglrx(0): Backup framebuffer data.
[ 25.661] (EE) fglrx(0): total backup size zero
[ 25.661] (II) fglrx(0): Backup complete.Any help would be greatly appreciated. 
73 de Mark AC8FP
Offline
#2 2010-07-25 00:15:25
- skottish
- Forum Fellow
- From: Here
- Registered: 2006-06-16
- Posts: 7,942
Re: Xorg 1.8.1.902 & Catalyst 10.6-5 & Mobility Radeon HD 2600
Welcome to the forums.
Please don't post general issues in this sub-forum. Moving...
Offline
#3 2010-07-26 19:56:10
- AC8FP
- Member
- From: EM79vr
- Registered: 2010-07-24
- Posts: 2
Re: Xorg 1.8.1.902 & Catalyst 10.6-5 & Mobility Radeon HD 2600
skottish wrote:
Welcome to the forums.
Please don't post general issues in this sub-forum. Moving...
Oops, my bad. 
As for my issue(s), I'm not going to bother with the proprietary driver until AMD gets their act together. 
73 de Mark AC8FP
Offline