You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2010-08-23 07:50:43
- mjae
- Member
- Registered: 2010-08-23
- Posts: 3
[solved] Graphical issues. ati
Got this error when i was going to startx this morning. fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found..
it boot as it usually does and should and yesterday it worked just fine.. No idea what to do
xorg.log
[ 65.419]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 65.420]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 65.421] X Protocol Version 11, Revision 0
[ 65.421] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 65.421] Current Operating System: Linux mjae 2.6.35-ARCH #2 SMP PREEMPT Sat Aug 14 21:58:00 CEST 2010 x86_64
[ 65.421] Kernel command line: root=/dev/disk/by-uuid/f1267a78-fe47-4a20-b8ed-de2341df900e ro nomodeset vga=999
[ 65.422] Build Date: 21 June 2010 12:01:49PM
[ 65.422]
[ 65.422] Current version of pixman: 0.18.4
[ 65.422] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 65.422] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 65.433] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 23 09:15:17 2010
[ 65.444] (==) Using config file: "/etc/X11/xorg.conf"
[ 65.454] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 65.465] (==) ServerLayout "aticonfig Layout"
[ 65.465] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 65.465] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 65.465] (**) | |-->Device "aticonfig-Device[0]-0"
[ 65.465] (==) Automatically adding devices
[ 65.465] (==) Automatically enabling devices
[ 65.465] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 65.465] Entry deleted from font path.
[ 65.465] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 65.465] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 65.465] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 65.465] (II) Loader magic: 0x7ce880
[ 65.465] (II) Module ABI versions:
[ 65.465] X.Org ANSI C Emulation: 0.4
[ 65.465] X.Org Video Driver: 7.0
[ 65.465] X.Org XInput driver : 9.0
[ 65.465] X.Org Server Extension : 3.0
[ 65.468] (--) PCI:*(0:1:0:0) 1002:9442:1002:0502 ATI Technologies Inc RV770 [Radeon HD 4850] rev 0, Mem @ 0xd0000000/268435456, 0xe5000000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
[ 65.468] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 65.468] (II) "extmod" will be loaded by default.
[ 65.468] (II) "dbe" will be loaded by default.
[ 65.468] (II) "glx" will be loaded by default.
[ 65.468] (II) "record" will be loaded by default.
[ 65.468] (II) "dri" will be loaded by default.
[ 65.468] (II) "dri2" will be loaded by default.
[ 65.468] (II) LoadModule: "extmod"
[ 65.468] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 65.468] (II) Module extmod: vendor="X.Org Foundation"
[ 65.468] compiled for 1.8.1.902, module version = 1.0.0
[ 65.468] Module class: X.Org Server Extension
[ 65.468] ABI class: X.Org Server Extension, version 3.0
[ 65.468] (II) Loading extension MIT-SCREEN-SAVER
[ 65.468] (II) Loading extension XFree86-VidModeExtension
[ 65.468] (II) Loading extension XFree86-DGA
[ 65.468] (II) Loading extension DPMS
[ 65.468] (II) Loading extension XVideo
[ 65.468] (II) Loading extension XVideo-MotionCompensation
[ 65.468] (II) Loading extension X-Resource
[ 65.468] (II) LoadModule: "dbe"
[ 65.468] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 65.468] (II) Module dbe: vendor="X.Org Foundation"
[ 65.468] compiled for 1.8.1.902, module version = 1.0.0
[ 65.468] Module class: X.Org Server Extension
[ 65.468] ABI class: X.Org Server Extension, version 3.0
[ 65.468] (II) Loading extension DOUBLE-BUFFER
[ 65.468] (II) LoadModule: "glx"
[ 65.468] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 65.469] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 65.469] compiled for 7.5.0, module version = 1.0.0
[ 65.469] (II) Loading extension GLX
[ 65.469] (II) LoadModule: "record"
[ 65.469] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 65.469] (II) Module record: vendor="X.Org Foundation"
[ 65.469] compiled for 1.8.1.902, module version = 1.13.0
[ 65.469] Module class: X.Org Server Extension
[ 65.469] ABI class: X.Org Server Extension, version 3.0
[ 65.469] (II) Loading extension RECORD
[ 65.469] (II) LoadModule: "dri"
[ 65.469] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 65.469] (II) Module dri: vendor="X.Org Foundation"
[ 65.469] compiled for 1.8.1.902, module version = 1.0.0
[ 65.469] ABI class: X.Org Server Extension, version 3.0
[ 65.469] (II) Loading extension XFree86-DRI
[ 65.469] (II) LoadModule: "dri2"
[ 65.469] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 65.469] (II) Module dri2: vendor="X.Org Foundation"
[ 65.469] compiled for 1.8.1.902, module version = 1.2.0
[ 65.469] ABI class: X.Org Server Extension, version 3.0
[ 65.469] (II) Loading extension DRI2
[ 65.469] (II) LoadModule: "fglrx"
[ 65.469] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 65.477] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 65.477] compiled for 1.7.1, module version = 8.75.5
[ 65.477] Module class: X.Org Video Driver
[ 65.478] (II) Loading sub module "fglrxdrm"
[ 65.478] (II) LoadModule: "fglrxdrm"
[ 65.478] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 65.478] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 65.478] compiled for 1.7.1, module version = 8.75.5
[ 65.478] (II) ATI Proprietary Linux Driver Version Identifier:8.75.5
[ 65.478] (II) ATI Proprietary Linux Driver Release Identifier: 8.753
[ 65.478] (II) ATI Proprietary Linux Driver Build Date: Jun 29 2010 22:08:06
[ 65.478] (--) using VT number 2
[ 65.513] (II) Primary Device is: PCI 01@00:00:0
[ 65.513] (WW) Falling back to old probe method for fglrx
[ 65.517] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 65.517] (--) Chipset Supported AMD Graphics Processor (0x9442) found
[ 65.517] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 65.517] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 65.517] (II) AMD Video driver is signed
[ 65.517] (II) fglrx(0): pEnt->device->identifier=0x21713a0
[ 65.517] (II) fglrx(0): === [atiddxPreInit] === begin
[ 65.517] (II) Loading sub module "vgahw"
[ 65.517] (II) LoadModule: "vgahw"
[ 65.518] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 65.518] (II) Module vgahw: vendor="X.Org Foundation"
[ 65.518] compiled for 1.8.1.902, module version = 0.1.0
[ 65.518] ABI class: X.Org Video Driver, version 7.0
[ 65.518] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 65.518] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 65.518] (==) fglrx(0): Default visual is TrueColor
[ 65.518] (**) fglrx(0): Option "DPMS" "true"
[ 65.518] (==) fglrx(0): RGB weight 888
[ 65.518] (II) fglrx(0): Using 8 bits per RGB
[ 65.518] (==) fglrx(0): Buffer Tiling is ON
[ 65.518] (II) Loading sub module "fglrxdrm"
[ 65.518] (II) LoadModule: "fglrxdrm"
[ 65.518] (II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 65.519] ukiDynamicMajor: found major device number 252
[ 65.519] ukiDynamicMajor: found major device number 252
[ 65.519] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 65.519] ukiOpenDevice: node name is /dev/ati/card0
[ 65.519] ukiOpenDevice: open result is 10, (OK)
[ 65.519] ukiOpenByBusid: ukiOpenMinor returns 10
[ 65.519] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 65.519] (==) fglrx(0): NoAccel = NO
[ 65.519] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 65.519] (--) fglrx(0): Chipset: "ATI Radeon HD 4800 Series " (Chipset = 0x9442)
[ 65.519] (--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0502)
[ 65.519] (==) fglrx(0): board vendor info: original ATI graphics adapter
[ 65.519] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 65.519] (--) fglrx(0): MMIO registers at 0xe5000000
[ 65.519] (--) fglrx(0): I/O port at 0x0000a000
[ 65.519] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 65.520] (II) fglrx(0): AC Adapter is used
[ 65.522] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 65.522] (II) Loading sub module "vbe"
[ 65.522] (II) LoadModule: "vbe"
[ 65.522] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 65.522] (II) Module vbe: vendor="X.Org Foundation"
[ 65.522] compiled for 1.8.1.902, module version = 1.1.0
[ 65.522] ABI class: X.Org Video Driver, version 7.0
[ 65.522] (II) fglrx(0): VESA BIOS detected
[ 65.522] (II) fglrx(0): VESA VBE Version 3.0
[ 65.522] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 65.522] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 65.522] (II) fglrx(0): VESA VBE OEM Software Rev: 11.3
[ 65.522] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 65.522] (II) fglrx(0): VESA VBE OEM Product: RV770
[ 65.522] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 65.576] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 65.576] (--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR3
[ 65.576] (II) fglrx(0): PCIE card detected
[ 65.576] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 65.576] (II) fglrx(0): board/chipset is supported by this driver (original ATI board)
[ 65.577] (II) fglrx(0): Using adapter: 1:0.0.
[ 65.676] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[ 65.683] (II) fglrx(0): Interrupt handler installed at IRQ 48.
[ 65.683] (II) fglrx(0): RandR 1.2 support is enabled!
[ 65.683] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 65.683] (==) fglrx(0): Center Mode is disabled
[ 65.683] (II) Loading sub module "fb"
[ 65.683] (II) LoadModule: "fb"
[ 65.684] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 65.684] (II) Module fb: vendor="X.Org Foundation"
[ 65.684] compiled for 1.8.1.902, module version = 1.0.0
[ 65.684] ABI class: X.Org ANSI C Emulation, version 0.4
[ 65.684] (II) Loading sub module "ddc"
[ 65.684] (II) LoadModule: "ddc"
[ 65.684] (II) Module "ddc" already built-in
[ 66.814] (II) fglrx(0): Finished Initialize PPLIB!
[ 66.816] (II) Loading sub module "ddc"
[ 66.816] (II) LoadModule: "ddc"
[ 66.816] (II) Module "ddc" already built-in
[ 66.816] (II) fglrx(0): Connected Display0: DFP on internal TMDS [tmds1]
[ 66.816] (II) fglrx(0): Display0 EDID data ---------------------------
[ 66.816] (II) fglrx(0): Manufacturer: GSM Model: 567e Serial#: 375056
[ 66.816] (II) fglrx(0): Year: 2009 Week: 1
[ 66.816] (II) fglrx(0): EDID Version: 1.3
[ 66.816] (II) fglrx(0): Digital Display Input
[ 66.816] (II) fglrx(0): Max Image Size [cm]: horiz.: 49 vert.: 32
[ 66.816] (II) fglrx(0): Gamma: 2.20
[ 66.816] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 66.816] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 66.816] (II) fglrx(0): First detailed timing is preferred mode
[ 66.816] (II) fglrx(0): redX: 0.635 redY: 0.342 greenX: 0.292 greenY: 0.611
[ 66.816] (II) fglrx(0): blueX: 0.147 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 66.816] (II) fglrx(0): Supported established timings:
[ 66.816] (II) fglrx(0): 720x400@70Hz
[ 66.816] (II) fglrx(0): 640x480@60Hz
[ 66.816] (II) fglrx(0): 640x480@75Hz
[ 66.816] (II) fglrx(0): 800x600@56Hz
[ 66.816] (II) fglrx(0): 800x600@60Hz
[ 66.816] (II) fglrx(0): 800x600@75Hz
[ 66.816] (II) fglrx(0): 832x624@75Hz
[ 66.816] (II) fglrx(0): 1024x768@60Hz
[ 66.816] (II) fglrx(0): 1024x768@75Hz
[ 66.816] (II) fglrx(0): 1280x1024@75Hz
[ 66.816] (II) fglrx(0): 1152x864@75Hz
[ 66.816] (II) fglrx(0): Manufacturer's mask: 0
[ 66.816] (II) fglrx(0): Supported standard timings:
[ 66.816] (II) fglrx(0): #0: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 66.816] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 66.816] (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 66.816] (II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 66.816] (II) fglrx(0): Supported detailed timing:
[ 66.816] (II) fglrx(0): clock: 119.0 MHz Image Size: 474 x 296 mm
[ 66.816] (II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 66.816] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 66.816] (II) fglrx(0): Supported detailed timing:
[ 66.816] (II) fglrx(0): clock: 146.2 MHz Image Size: 474 x 296 mm
[ 66.816] (II) fglrx(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 66.816] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 66.816] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 150 MHz
[ 66.816] (II) fglrx(0): Monitor name: W2252
[ 66.816] (II) fglrx(0): EDID (in hex):
[ 66.816] (II) fglrx(0): 00ffffffffffff001e6d7e5610b90500
[ 66.816] (II) fglrx(0): 01130103ea312078eaaec5a2574a9c25
[ 66.816] (II) fglrx(0): 125054a76b80950081808140714f0101
[ 66.816] (II) fglrx(0): 0101010101017c2e90a0601a1e403020
[ 66.816] (II) fglrx(0): 3600da281100001a21399030621a2740
[ 66.816] (II) fglrx(0): 68b03600da281100001c000000fd0038
[ 66.816] (II) fglrx(0): 4b1e530f000a202020202020000000fc
[ 66.816] (II) fglrx(0): 0057323235320a202020202020200095
[ 66.816] (II) fglrx(0): End of Display0 EDID data --------------------
[ 66.816] (II) fglrx(0): Connected Display1: CRT on primary DAC [crt1]
[ 66.816] (II) fglrx(0): Display1 EDID data ---------------------------
[ 66.816] (II) fglrx(0): Manufacturer: BNQ Model: 7811 Serial#: 21573
[ 66.816] (II) fglrx(0): Year: 2008 Week: 16
[ 66.816] (II) fglrx(0): EDID Version: 1.3
[ 66.816] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 66.816] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 66.816] (II) fglrx(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 66.816] (II) fglrx(0): Gamma: 2.20
[ 66.816] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 66.816] (II) fglrx(0): Default color space is primary color space
[ 66.816] (II) fglrx(0): First detailed timing is preferred mode
[ 66.816] (II) fglrx(0): redX: 0.651 redY: 0.330 greenX: 0.267 greenY: 0.630
[ 66.816] (II) fglrx(0): blueX: 0.145 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
[ 66.816] (II) fglrx(0): Supported established timings:
[ 66.816] (II) fglrx(0): 720x400@70Hz
[ 66.816] (II) fglrx(0): 640x480@60Hz
[ 66.816] (II) fglrx(0): 640x480@75Hz
[ 66.816] (II) fglrx(0): 800x600@60Hz
[ 66.816] (II) fglrx(0): 800x600@75Hz
[ 66.816] (II) fglrx(0): 832x624@75Hz
[ 66.816] (II) fglrx(0): 1024x768@60Hz
[ 66.816] (II) fglrx(0): 1024x768@75Hz
[ 66.816] (II) fglrx(0): 1280x1024@75Hz
[ 66.816] (II) fglrx(0): 1152x864@75Hz
[ 66.816] (II) fglrx(0): Manufacturer's mask: 0
[ 66.816] (II) fglrx(0): Supported standard timings:
[ 66.816] (II) fglrx(0): #0: hsize: 1152 vsize 720 refresh: 60 vid: 113
[ 66.816] (II) fglrx(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 66.816] (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 66.816] (II) fglrx(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 66.816] (II) fglrx(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 66.816] (II) fglrx(0): #5: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 66.816] (II) fglrx(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 66.817] (II) fglrx(0): Supported detailed timing:
[ 66.817] (II) fglrx(0): clock: 146.2 MHz Image Size: 474 x 296 mm
[ 66.817] (II) fglrx(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 66.817] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 66.817] (II) fglrx(0): Serial No: J4806182026
[ 66.817] (II) fglrx(0): Ranges: V min: 55 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 170 MHz
[ 66.817] (II) fglrx(0): Monitor name: BenQG2110W
[ 66.817] (II) fglrx(0): EDID (in hex):
[ 66.817] (II) fglrx(0): 00ffffffffffff0009d1117845540000
[ 66.817] (II) fglrx(0): 101201030e2f1e782ee525a65444a125
[ 66.817] (II) fglrx(0): 145054a56b80710081008140950f8180
[ 66.817] (II) fglrx(0): 9500b300010121399030621a274068b0
[ 66.817] (II) fglrx(0): 3600da281100001c000000ff004a3438
[ 66.817] (II) fglrx(0): 30363138323032360a20000000fd0037
[ 66.817] (II) fglrx(0): 4c1f5311000a202020202020000000fc
[ 66.817] (II) fglrx(0): 0042656e514732313130570a2020001e
[ 66.817] (II) fglrx(0): End of Display1 EDID data --------------------
[ 66.817] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 66.817] (II) fglrx(0): Output DFP2 has no monitor section
[ 66.817] (II) fglrx(0): Output CRT1 has no monitor section
[ 66.817] (II) fglrx(0): Output CRT2 has no monitor section
[ 66.817] (II) fglrx(0): Output TV has no monitor section
[ 66.817] (II) fglrx(0): Output COMPONENT_VIDEO has no monitor section
[ 67.003] (II) fglrx(0): EDID vendor "GSM", prod id 22142
[ 67.003] (II) fglrx(0): Using EDID range info for horizontal sync
[ 67.003] (II) fglrx(0): Using EDID range info for vertical refresh
[ 67.003] (II) fglrx(0): Printing DDC gathered Modelines:
[ 67.003] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 67.003] (II) fglrx(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 67.003] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 67.003] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 67.003] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 67.003] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 67.003] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 67.003] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 67.003] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 67.003] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 67.003] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 67.003] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 67.003] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 67.003] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 67.003] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 67.003] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 67.004] (II) fglrx(0): Output DFP1 connected
[ 67.004] (II) fglrx(0): Output DFP2 disconnected
[ 67.004] (II) fglrx(0): Output CRT1 connected
[ 67.004] (II) fglrx(0): Output CRT2 disconnected
[ 67.004] (II) fglrx(0): Output TV disconnected
[ 67.004] (II) fglrx(0): Output COMPONENT_VIDEO disconnected
[ 67.004] (II) fglrx(0): Using exact sizes for initial modes
[ 67.004] (II) fglrx(0): Output DFP1 using initial mode 1680x1050
[ 67.004] (II) fglrx(0): Output CRT1 using initial mode 1680x1050
[ 67.004] (II) fglrx(0): Display dimensions: (490, 320) mm
[ 67.004] (II) fglrx(0): DPI set to (87, 83)
[ 67.004] (II) fglrx(0): Adapter ATI Radeon HD 4800 Series has 2 configurable heads and 2 displays connected.
[ 67.004] (==) fglrx(0): QBS disabled
[ 67.004] (==) fglrx(0): PseudoColor visuals disabled
[ 67.004] (II) Loading sub module "ramdac"
[ 67.004] (II) LoadModule: "ramdac"
[ 67.004] (II) Module "ramdac" already built-in
[ 67.004] (==) fglrx(0): NoDRI = NO
[ 67.004] (==) fglrx(0): Capabilities: 0x00000000
[ 67.004] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 67.004] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 67.004] (==) fglrx(0): UseFastTLS=0
[ 67.004] (==) fglrx(0): BlockSignalsOnLock=1
[ 67.004] (--) Depth 24 pixmap format is 32 bpp
[ 67.004] (II) Loading extension ATIFGLRXDRI
[ 67.004] (II) fglrx(0): doing swlDriScreenInit
[ 67.004] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 67.004] ukiDynamicMajor: found major device number 252
[ 67.004] ukiDynamicMajor: found major device number 252
[ 67.004] ukiDynamicMajor: found major device number 252
[ 67.004] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 67.004] ukiOpenDevice: node name is /dev/ati/card0
[ 67.004] ukiOpenDevice: open result is 15, (OK)
[ 67.004] ukiOpenByBusid: ukiOpenMinor returns 15
[ 67.004] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 67.004] (II) fglrx(0): [uki] DRM interface version 1.0
[ 67.004] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 67.004] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x1c000
[ 67.004] (II) fglrx(0): [uki] mapped SAREA 0x1c000 to 0x7f419066d000
[ 67.004] (II) fglrx(0): [uki] framebuffer handle = 0x1d000
[ 67.004] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 67.004] (II) fglrx(0): swlDriScreenInit done
[ 67.004] (II) fglrx(0): Kernel Module Version Information:
[ 67.004] (II) fglrx(0): Name: fglrx
[ 67.004] (II) fglrx(0): Version: 8.75.5
[ 67.004] (II) fglrx(0): Date: Jun 29 2010
[ 67.004] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 67.004] (II) fglrx(0): Kernel Module version matches driver.
[ 67.004] (II) fglrx(0): Kernel Module Build Time Information:
[ 67.004] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.35-ARCH
[ 67.004] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 67.004] (II) fglrx(0): Build-Kernel __SMP__: no
[ 67.004] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 67.004] (II) fglrx(0): [uki] register handle = 0x0001e000
[ 67.016] (II) fglrx(0): Display width adjusted to to 1792 due to alignment constraints
[ 67.016] (II) fglrx(0): DRI initialization successfull!
[ 67.016] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x010a0000
[ 67.016] (II) fglrx(0): FBMM initialized for area (0,0)-(1792,2432)
[ 67.016] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1792,1792) (front color buffer - assumption)
[ 67.016] (II) fglrx(0): Largest offscreen area available: 1792 x 640
[ 67.016] (==) fglrx(0): Backing store disabled
[ 67.016] (II) Loading extension FGLRXEXTENSION
[ 67.016] (**) fglrx(0): DPMS enabled
[ 67.016] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 67.016] (**) fglrx(0): Textured Video is enabled.
[ 67.016] (II) LoadModule: "glesx"
[ 67.017] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 67.017] (II) Module glesx: vendor="X.Org Foundation"
[ 67.017] compiled for 1.7.1, module version = 1.0.0
[ 67.017] (II) Loading extension GLESX
[ 67.017] (II) fglrx(0): GLESX enableFlags = 528
[ 67.017] (II) fglrx(0): GLESX is enabled
[ 67.017] (II) fglrx(0): Acceleration enabled
[ 67.017] (II) LoadModule: "amdxmm"
[ 67.017] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 67.017] (II) Module amdxmm: vendor="X.Org Foundation"
[ 67.017] compiled for 1.7.1, module version = 1.0.0
[ 67.017] (II) Loading extension AMDXVOPL
[ 67.018] (II) fglrx(0): UVD2 feature is available
[ 67.019] (II) fglrx(0): Enable composite support successfully
[ 67.019] (WW) fglrx(0): Option "VendorName" is not used
[ 67.019] (WW) fglrx(0): Option "ModelName" is not used
[ 67.019] (II) fglrx(0): X context handle = 0x1
[ 67.020] (II) fglrx(0): [DRI] installation complete
[ 67.020] (==) fglrx(0): Silken mouse enabled
[ 67.020] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 67.020] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 67.020] (II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
[ 67.020] (II) fglrx(0): Cannot set TV horizontal size.
[ 67.020] (II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed.
[ 67.020] (II) fglrx(0): Cannot set TV horizontal position.
[ 67.020] (II) fglrx(0): Cannot set TV vertical position.
[ 67.169] (--) RandR disabled
[ 67.169] (II) Initializing built-in extension Generic Event Extension
[ 67.169] (II) Initializing built-in extension SHAPE
[ 67.169] (II) Initializing built-in extension MIT-SHM
[ 67.169] (II) Initializing built-in extension XInputExtension
[ 67.169] (II) Initializing built-in extension XTEST
[ 67.169] (II) Initializing built-in extension BIG-REQUESTS
[ 67.169] (II) Initializing built-in extension SYNC
[ 67.169] (II) Initializing built-in extension XKEYBOARD
[ 67.169] (II) Initializing built-in extension XC-MISC
[ 67.169] (II) Initializing built-in extension SECURITY
[ 67.169] (II) Initializing built-in extension XINERAMA
[ 67.169] (II) Initializing built-in extension XFIXES
[ 67.169] (II) Initializing built-in extension RENDER
[ 67.169] (II) Initializing built-in extension RANDR
[ 67.169] (II) Initializing built-in extension COMPOSITE
[ 67.169] (II) Initializing built-in extension DAMAGE
[ 67.171] ukiDynamicMajor: found major device number 252
[ 67.171] ukiDynamicMajor: found major device number 252
[ 67.171] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 67.171] ukiOpenDevice: node name is /dev/ati/card0
[ 67.171] ukiOpenDevice: open result is 16, (OK)
[ 67.171] ukiOpenByBusid: ukiOpenMinor returns 16
[ 67.171] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 67.219] (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
[ 67.219] (II) GLX: Initialized DRI GL provider for screen 0
[ 67.227] (II) fglrx(0): Enable the clock gating!
[ 67.227] (II) fglrx(0): Setting screen physical size to 444 x 277
[ 67.309] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 67.309] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 67.309] (II) LoadModule: "evdev"
[ 67.309] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 67.309] (II) Module evdev: vendor="X.Org Foundation"
[ 67.309] compiled for 1.8.1.902, module version = 2.4.0
[ 67.309] Module class: X.Org XInput Driver
[ 67.309] ABI class: X.Org XInput driver, version 9.0
[ 67.309] (**) Power Button: always reports core events
[ 67.309] (**) Power Button: Device: "/dev/input/event2"
[ 67.317] (II) Power Button: Found keys
[ 67.317] (II) Power Button: Configuring as keyboard
[ 67.317] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 67.317] (**) Option "xkb_rules" "evdev"
[ 67.317] (**) Option "xkb_model" "evdev"
[ 67.317] (**) Option "xkb_layout" "us"
[ 67.340] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 67.340] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 67.340] (**) Power Button: always reports core events
[ 67.340] (**) Power Button: Device: "/dev/input/event1"
[ 67.350] (II) Power Button: Found keys
[ 67.350] (II) Power Button: Configuring as keyboard
[ 67.350] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 67.350] (**) Option "xkb_rules" "evdev"
[ 67.350] (**) Option "xkb_model" "evdev"
[ 67.350] (**) Option "xkb_layout" "us"
[ 67.351] (II) config/udev: Adding input device HID 047f:c001 (/dev/input/event3)
[ 67.351] (**) HID 047f:c001: Applying InputClass "evdev keyboard catchall"
[ 67.351] (**) HID 047f:c001: always reports core events
[ 67.351] (**) HID 047f:c001: Device: "/dev/input/event3"
[ 67.360] (II) HID 047f:c001: Found keys
[ 67.360] (II) HID 047f:c001: Configuring as keyboard
[ 67.360] (II) XINPUT: Adding extended input device "HID 047f:c001" (type: KEYBOARD)
[ 67.360] (**) Option "xkb_rules" "evdev"
[ 67.360] (**) Option "xkb_model" "evdev"
[ 67.360] (**) Option "xkb_layout" "us"
[ 67.360] (II) config/udev: Adding input device Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) (/dev/input/event4)
[ 67.360] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Applying InputClass "evdev pointer catchall"
[ 67.360] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): always reports core events
[ 67.360] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Device: "/dev/input/event4"
[ 67.370] (II) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found 9 mouse buttons
[ 67.370] (II) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found scroll wheel(s)
[ 67.370] (II) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found relative axes
[ 67.370] (II) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found x and y relative axes
[ 67.370] (II) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Configuring as mouse
[ 67.370] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): YAxisMapping: buttons 4 and 5
[ 67.370] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 67.370] (II) XINPUT: Adding extended input device "Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)" (type: MOUSE)
[ 67.370] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) keeping acceleration scheme 1
[ 67.370] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration profile 0
[ 67.370] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
[ 67.370] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
[ 67.370] (II) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): initialized for relative axes.
[ 67.370] (II) config/udev: Adding input device Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) (/dev/input/mouse0)
[ 67.370] (II) No input driver/identifier specified (ignoring)
[ 67.371] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/event5)
[ 67.372] (**) Logitech Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 67.372] (**) Logitech Logitech USB Keyboard: always reports core events
[ 67.372] (**) Logitech Logitech USB Keyboard: Device: "/dev/input/event5"
[ 67.383] (II) Logitech Logitech USB Keyboard: Found keys
[ 67.383] (II) Logitech Logitech USB Keyboard: Configuring as keyboard
[ 67.383] (II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard" (type: KEYBOARD)
[ 67.383] (**) Option "xkb_rules" "evdev"
[ 67.383] (**) Option "xkb_model" "evdev"
[ 67.383] (**) Option "xkb_layout" "us"
[ 67.384] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/event6)
[ 67.384] (**) Logitech Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 67.384] (**) Logitech Logitech USB Keyboard: always reports core events
[ 67.384] (**) Logitech Logitech USB Keyboard: Device: "/dev/input/event6"
[ 67.397] (II) Logitech Logitech USB Keyboard: Found keys
[ 67.397] (II) Logitech Logitech USB Keyboard: Configuring as keyboard
[ 67.397] (II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard" (type: KEYBOARD)
[ 67.397] (**) Option "xkb_rules" "evdev"
[ 67.397] (**) Option "xkb_model" "evdev"
[ 67.397] (**) Option "xkb_layout" "us"
[ 67.399] (II) config/udev: Adding input device PC Speaker (/dev/input/event0)
[ 67.399] (II) No input driver/identifier specified (ignoring)
[ 67.435] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 67.450] (II) Power Button: Close
[ 67.450] (II) UnloadModule: "evdev"
[ 67.460] (II) Power Button: Close
[ 67.460] (II) UnloadModule: "evdev"
[ 67.470] (II) HID 047f:c001: Close
[ 67.470] (II) UnloadModule: "evdev"
[ 67.506] (II) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Close
[ 67.506] (II) UnloadModule: "evdev"
[ 67.533] (II) Logitech Logitech USB Keyboard: Close
[ 67.533] (II) UnloadModule: "evdev"
[ 67.560] (II) Logitech Logitech USB Keyboard: Close
[ 67.560] (II) UnloadModule: "evdev"
[ 67.562] (II) fglrx(0): Shutdown CMMQS
[ 67.562] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[ 67.562] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x1c000 at 0x7f419066d000
[ 67.602] (II) fglrx(0): Interrupt handler Shutdown.xorg.conf
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "0-DFP1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1680x1050"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "0-CRT1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1680x1050"
Option "TargetRefresh" "60"
Option "Position" "1680 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Device"
Option "BackingStore" "True"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "Monitor-DFP1" "0-DFP1"
Option "Monitor-CRT1" "0-CRT1"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Virtual 3360 1680
Depth 24
EndSubSection
EndSectionLast edited by mjae (2010-08-24 08:37:52)
Offline
#2 2010-08-23 09:10:25
- splashy
- Member
- Registered: 2010-08-21
- Posts: 128
Re: [solved] Graphical issues. ati
You should try the radeon driver one, it's now a good alternative and it's support the 2d/3d acceleration. Sorry but I can't help you more.
Offline
#3 2010-08-24 08:37:14
- mjae
- Member
- Registered: 2010-08-23
- Posts: 3
Re: [solved] Graphical issues. ati
solved it by removing setxkbmap se from .xinitrc.
Offline
Pages: 1