I just installed arch on my new server, and I have to say - I love it!
there is just one small problem, I have an USB modem to connect to the internet (Alcatel speedtouch 330), but it seems my USB hardware isn't detected...
output of some (hopefully) helpful commands:
$ hwd -s HARDWARE DETECT ver 4.6 (simple mode) Kernel : 220.127.116.11-ARCH CPU & Cache: Processor 0 is Intel(R) Pentium(R) 4 CPU 3.00GHz 3060MHz, 1024 KB Cache Processor 1 is Intel(R) Pentium(R) 4 CPU 3.00GHz 3060MHz, 1024 KB Cache Soundcard : No sound card Video : XFree86 not installed. Drive(ide) : Maxtor 6Y080P0 (HD) 81969MB / 7936KB cache, device: /dev/hda USB : No USB Ethernet : Realtek|RTL-8139 module: 8139too device: eth0 eth1 PCMCIA slot: No PCMCIA -----------: Menu : Hwd: hwd, Lshwd: lshwd -?, X: mkxcfg X sample : Generate X sample: hwd -x Howto : View howto: hwd -h $ lsmod Module Size Used by hw_random 5908 0 uhci_hcd 33424 0 ohci_hcd 23048 0 ehci_hcd 36488 0 parport_pc 29252 0 parport 38600 1 parport_pc pcspkr 4044 0 i2c_i801 8972 0 i2c_core 23296 1 i2c_i801 shpchp 100996 0 pci_hotplug 34760 1 shpchp evdev 9984 0 8139too 28160 0 8139cp 22272 0 mii 5760 2 8139too,8139cp usbcore 125560 4 uhci_hcd,ohci_hcd,ehci_hcd rtc 13260 0 $ lspci 00:00.0 Host bridge: Intel Corp.: Unknown device 2570 (rev 02) 00:01.0 PCI bridge: Intel Corp.: Unknown device 2571 (rev 02) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev c2) 00:1f.0 ISA bridge: Intel Corp.: Unknown device 24d0 (rev 02) 00:1f.1 IDE interface: Intel Corp.: Unknown device 24db (rev 02) 00:1f.3 SMBus: Intel Corp.: Unknown device 24d3 (rev 02) 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon VE QY 02:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 02:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
I use an Abit Ai7 Motherboard, which is well supported AFAIK.
Am I doing something wrong, or does anyone have the same experience?
Thanks in advance!
Ok, I hate replying to my own post, and I hate begging for help... but since I still have this problem, and I need to find a fix as soon as possible, I really need some help on this one.
Can someone at least point me to the right direction?
I don't like to be forced to buy an ethernet modem, or to use other distributions (don't know wether this is an Arch problem, might be the same on other distributions though)
Thanks in advance!
try lsusb - see if that spits anything out... what kind of modem is it (model number, manufacturer, etc)
also, try "dmesg | grep -i usb" and maybe "grep -i usb /var/log/everything"
There is a package for the speedtouch drivers:
pacman -S speedtouch
Check the wiki: http://wiki2.archlinux.org/index.php/Speedtouch
what kind of modem is it (model number, manufacturer, etc)
whoops, you said that already... yeah I think speedtouch requires some special setup - follow snowman's suggestions
Well... the problem is not really the modem itself, I managed to get that one working on an other computer running linux.
it's just that I don't have any support for USB, even my USB-stick won't mount (using http://wiki2.archlinux.org/index.php/USB%20Sticks).
'lsusb' doesn't give any outpout
dmesg | grep -i usb gives me the following:
PCI0 HUB0 UAR1 USB0 USB1 USB2 USB3 USBE MODM usbcore: registered new driver usbfs usbcore: registered new driver hub ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v2.2 usbcore: deregistering driver usbfs usbcore: deregistering driver hub usbcore: registered new driver usbfs usbcore: registered new driver hub ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v2.2 Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered.
'mount | grep usb' says "none on /proc/bus/usb type usbfs (rw)", but "/proc/bus/usb/devices" doesn't exsists