You are not logged in.

Pages: 1

#1 2010-09-17 02:22:13

rio
Member
Registered: 2010-09-17
Posts: 9

Slow Gnome/Compiz/Emerald startup

Hi there,

Starting X during the boot process takes some time between first seeing the cursor and finally being usable. I am starting gdm in runlevel 5 and then use autologin to fire up my profile. Compiz/Emerald load fine, but something's delaying the startup.

I did some profiling with bootchartd, where you can see that X comes up after 16 seconds and is usable at ~55 seconds, a long time.

boortchartd profile

Xorg is basically running without an xorg.conf, just some minor tweaks in /etc/X11/xorg.conf.d.
Xorg.0.log looks like this:

[    11.300] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[    11.337] 
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[    11.337] X Protocol Version 11, Revision 0
[    11.337] Build Operating System: Linux 2.6.34-ARCH x86_64 
[    11.337] Current Operating System: Linux turanga 2.6.35-ARCH #1 SMP PREEMPT Fri Aug 27 17:14:28 CEST 2010 x86_64
[    11.337] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/mapper/turanga-root ro fastboot quiet init=/sbin/bootchartd
[    11.337] Build Date: 21 June 2010  12:01:49PM
[    11.337]  
[    11.337] Current version of pixman: 0.18.4
[    11.337]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    11.337] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    11.338] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 17 03:57:56 2010
[    11.439] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    11.552] (==) No Layout section.  Using the first Screen section.
[    11.552] (==) No screen section available. Using defaults.
[    11.552] (**) |-->Screen "Default Screen Section" (0)
[    11.552] (**) |   |-->Monitor "<default monitor>"
[    11.552] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    11.552] (==) Automatically adding devices
[    11.552] (==) Automatically enabling devices
[    11.621] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    11.621]     Entry deleted from font path.
[    11.682] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
[    11.682] (==) ModulePath set to "/usr/lib/xorg/modules"
[    11.682] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    11.682] (II) Loader magic: 0x7ce880
[    11.683] (II) Module ABI versions:
[    11.683]     X.Org ANSI C Emulation: 0.4
[    11.683]     X.Org Video Driver: 7.0
[    11.683]     X.Org XInput driver : 9.0
[    11.683]     X.Org Server Extension : 3.0
[    11.691] (--) PCI:*(0:0:2:0) 8086:2a02:17aa:20b5 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xf8100000/1048576, 0xe0000000/268435456, I/O @ 0x00001800/8
[    11.691] (--) PCI: (0:0:2:1) 8086:2a03:17aa:20b5 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xf8200000/1048576
[    11.705] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    11.705] (II) LoadModule: "extmod"
[    11.764] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    11.775] (II) Module extmod: vendor="X.Org Foundation"
[    11.775]     compiled for 1.8.1.902, module version = 1.0.0
[    11.775]     Module class: X.Org Server Extension
[    11.775]     ABI class: X.Org Server Extension, version 3.0
[    11.775] (II) Loading extension MIT-SCREEN-SAVER
[    11.775] (II) Loading extension XFree86-VidModeExtension
[    11.775] (II) Loading extension XFree86-DGA
[    11.775] (II) Loading extension DPMS
[    11.775] (II) Loading extension XVideo
[    11.775] (II) Loading extension XVideo-MotionCompensation
[    11.775] (II) Loading extension X-Resource
[    11.775] (II) LoadModule: "dbe"
[    11.776] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    11.789] (II) Module dbe: vendor="X.Org Foundation"
[    11.789]     compiled for 1.8.1.902, module version = 1.0.0
[    11.789]     Module class: X.Org Server Extension
[    11.789]     ABI class: X.Org Server Extension, version 3.0
[    11.789] (II) Loading extension DOUBLE-BUFFER
[    11.789] (II) LoadModule: "glx"
[    11.790] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    11.948] (II) Module glx: vendor="X.Org Foundation"
[    11.948]     compiled for 1.8.1.902, module version = 1.0.0
[    11.948]     ABI class: X.Org Server Extension, version 3.0
[    11.948] (==) AIGLX enabled
[    11.948] (II) Loading extension GLX
[    11.965] (II) LoadModule: "record"
[    11.966] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    11.981] (II) Module record: vendor="X.Org Foundation"
[    11.981]     compiled for 1.8.1.902, module version = 1.13.0
[    11.981]     Module class: X.Org Server Extension
[    11.981]     ABI class: X.Org Server Extension, version 3.0
[    11.981] (II) Loading extension RECORD
[    11.981] (II) LoadModule: "dri"
[    11.981] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    12.026] (II) Module dri: vendor="X.Org Foundation"
[    12.026]     compiled for 1.8.1.902, module version = 1.0.0
[    12.026]     ABI class: X.Org Server Extension, version 3.0
[    12.026] (II) Loading extension XFree86-DRI
[    12.026] (II) LoadModule: "dri2"
[    12.027] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    12.027] (II) Module dri2: vendor="X.Org Foundation"
[    12.027]     compiled for 1.8.1.902, module version = 1.2.0
[    12.027]     ABI class: X.Org Server Extension, version 3.0
[    12.027] (II) Loading extension DRI2
[    12.027] (==) Matched intel as autoconfigured driver 0
[    12.027] (==) Matched vesa as autoconfigured driver 1
[    12.027] (==) Matched fbdev as autoconfigured driver 2
[    12.027] (==) Assigned the driver to the xf86ConfigLayout
[    12.027] (II) LoadModule: "intel"
[    12.036] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    12.209] (II) Module intel: vendor="X.Org Foundation"
[    12.209]     compiled for 1.8.1.902, module version = 2.12.0
[    12.209]     Module class: X.Org Video Driver
[    12.209]     ABI class: X.Org Video Driver, version 7.0
[    12.209] (II) LoadModule: "vesa"
[    12.209] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    12.224] (II) Module vesa: vendor="X.Org Foundation"
[    12.224]     compiled for 1.8.0, module version = 2.3.0
[    12.224]     Module class: X.Org Video Driver
[    12.224]     ABI class: X.Org Video Driver, version 7.0
[    12.224] (II) LoadModule: "fbdev"
[    12.224] (WW) Warning, couldn't open module fbdev
[    12.224] (II) UnloadModule: "fbdev"
[    12.224] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    12.224] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[    12.225] (II) VESA: driver for VESA chipsets: vesa
[    12.225] (++) using VT number 7

[    12.229] (II) Primary Device is: PCI 00@00:02:0
[    12.229] (WW) Falling back to old probe method for vesa
[    12.229] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    12.230] drmOpenDevice: node name is /dev/dri/card0
[    12.230] drmOpenDevice: open result is 7, (OK)
[    12.267] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    12.267] drmOpenDevice: node name is /dev/dri/card0
[    12.267] drmOpenDevice: open result is 7, (OK)
[    12.267] drmOpenByBusid: drmOpenMinor returns 7
[    12.267] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    12.267] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    12.267] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    12.267] (==) intel(0): RGB weight 888
[    12.267] (==) intel(0): Default visual is TrueColor
[    12.268] (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
[    12.268] (--) intel(0): Chipset: "965GM"
[    12.268] (==) intel(0): video overlay key set to 0x101fe
[    12.287] (II) intel(0): Output VGA1 has no monitor section
[    12.393] (II) intel(0): Output LVDS1 has no monitor section
[    12.393] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    12.422] (II) intel(0): Output DVI1 has no monitor section
[    12.440] (II) intel(0): EDID for output VGA1
[    12.554] (II) intel(0): EDID for output LVDS1
[    12.570] (II) intel(0): Manufacturer: LEN  Model: 4033  Serial#: 0
[    12.570] (II) intel(0): Year: 2007  Week: 0
[    12.570] (II) intel(0): EDID Version: 1.3
[    12.570] (II) intel(0): Digital Display Input
[    12.570] (II) intel(0): Max Image Size [cm]: horiz.: 30  vert.: 19
[    12.571] (II) intel(0): Gamma: 2.20
[    12.571] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[    12.571] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    12.571] (II) intel(0): First detailed timing is preferred mode
[    12.571] (II) intel(0): redX: 0.588 redY: 0.346   greenX: 0.327 greenY: 0.549
[    12.571] (II) intel(0): blueX: 0.156 blueY: 0.142   whiteX: 0.312 whiteY: 0.328
[    12.571] (II) intel(0): Manufacturer's mask: 0
[    12.571] (II) intel(0): Supported detailed timing:
[    12.571] (II) intel(0): clock: 102.0 MHz   Image Size:  304 x 190 mm
[    12.571] (II) intel(0): h_active: 1440  h_sync: 1488  h_sync_end 1520 h_blank_end 1832 h_border: 0
[    12.571] (II) intel(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 926 v_border: 0
[    12.571] (II) intel(0): Supported detailed timing:
[    12.571] (II) intel(0): clock: 84.8 MHz   Image Size:  304 x 190 mm
[    12.571] (II) intel(0): h_active: 1440  h_sync: 1488  h_sync_end 1520 h_blank_end 1832 h_border: 0
[    12.571] (II) intel(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 926 v_border: 0
[    12.571] (II) intel(0): Unknown vendor-specific block f
[    12.571] (II) intel(0):  LP141WP1-TLB8
[    12.571] (II) intel(0): EDID (in hex):
[    12.571] (II) intel(0):     00ffffffffffff0030ae334000000000
[    12.571] (II) intel(0):     00110103801e1378eaae109658538c28
[    12.571] (II) intel(0):     24505400000001010101010101010101
[    12.571] (II) intel(0):     010101010101d827a08851841a303020
[    12.571] (II) intel(0):     360030be100000192221a08851841a30
[    12.571] (II) intel(0):     3020360030be100000190000000f0090
[    12.571] (II) intel(0):     0a32900a28140100320c0101000000fe
[    12.571] (II) intel(0):     004c503134315750312d544c423800b7
[    12.571] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    12.571] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    12.571] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    12.571] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    12.571] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    12.571] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    12.571] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    12.572] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    12.572] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    12.572] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    12.572] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    12.572] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    12.572] (II) intel(0): Printing probed modes for output LVDS1
[    12.572] (II) intel(0): Modeline "1440x900"x60.1  102.00  1440 1488 1520 1832  900 903 909 926 -hsync -vsync (55.7 kHz)
[    12.572] (II) intel(0): Modeline "1440x900"x50.0   84.82  1440 1488 1520 1832  900 903 909 926 -hsync -vsync (46.3 kHz)
[    12.572] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    12.572] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    12.572] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    12.572] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    12.734] (II) intel(0): EDID for output DVI1
[    12.734] (II) intel(0): Output VGA1 disconnected
[    12.734] (II) intel(0): Output LVDS1 connected
[    12.734] (II) intel(0): Output DVI1 disconnected
[    12.734] (II) intel(0): Using exact sizes for initial modes
[    12.734] (II) intel(0): Output LVDS1 using initial mode 1440x900
[    12.734] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    12.734] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
[    12.734] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
[    12.734] (==) intel(0): DPI set to (96, 96)
[    12.734] (II) Loading sub module "fb"
[    12.734] (II) LoadModule: "fb"
[    12.734] (II) Loading /usr/lib/xorg/modules/libfb.so
[    13.131] (II) Module fb: vendor="X.Org Foundation"
[    13.131]     compiled for 1.8.1.902, module version = 1.0.0
[    13.131]     ABI class: X.Org ANSI C Emulation, version 0.4
[    13.131] (II) UnloadModule: "vesa"
[    13.131] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    13.131] (==) Depth 24 pixmap format is 32 bpp
[    13.131] (II) intel(0): [DRI2] Setup complete
[    13.131] (II) intel(0): [DRI2]   DRI driver: i965
[    13.132] (**) intel(0): Tiling enabled
[    13.132] (**) intel(0): SwapBuffers wait enabled
[    13.132] (==) intel(0): VideoRam: 262144 KB
[    13.132] (II) intel(0): Allocated new frame buffer 1472x900 stride 6144, tiled
[    13.162] (II) UXA(0): Driver registered support for the following operations:
[    13.162] (II)         solid
[    13.162] (II)         copy
[    13.162] (II)         composite (RENDER acceleration)
[    13.162] (II)         put_image
[    13.162] (II)         get_image
[    13.175] (==) intel(0): Backing store disabled
[    13.175] (==) intel(0): Silken mouse enabled
[    13.176] (II) intel(0): Initializing HW Cursor
[    13.220] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    13.637] (==) intel(0): DPMS enabled
[    13.637] (==) intel(0): Intel XvMC decoder enabled
[    13.637] (II) intel(0): Set up textured video
[    13.637] (II) intel(0): Set up overlay video
[    13.637] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[    13.637] (II) intel(0): direct rendering: DRI2 Enabled
[    13.637] (--) RandR disabled
[    13.637] (II) Initializing built-in extension Generic Event Extension
[    13.637] (II) Initializing built-in extension SHAPE
[    13.637] (II) Initializing built-in extension MIT-SHM
[    13.637] (II) Initializing built-in extension XInputExtension
[    13.637] (II) Initializing built-in extension XTEST
[    13.637] (II) Initializing built-in extension BIG-REQUESTS
[    13.637] (II) Initializing built-in extension SYNC
[    13.637] (II) Initializing built-in extension XKEYBOARD
[    13.637] (II) Initializing built-in extension XC-MISC
[    13.637] (II) Initializing built-in extension SECURITY
[    13.637] (II) Initializing built-in extension XINERAMA
[    13.637] (II) Initializing built-in extension XFIXES
[    13.637] (II) Initializing built-in extension RENDER
[    13.637] (II) Initializing built-in extension RANDR
[    13.637] (II) Initializing built-in extension COMPOSITE
[    13.637] (II) Initializing built-in extension DAMAGE
[    13.717] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    13.717] (II) AIGLX: enabled GLX_INTEL_swap_event
[    13.717] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    13.717] (II) AIGLX: enabled GLX_SGI_make_current_read
[    13.717] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    13.717] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
[    13.717] (II) GLX: Initialized DRI2 GL provider for screen 0
[    13.717] (II) intel(0): Setting screen physical size to 381 x 238
[    14.674] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    14.674] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    14.674] (II) LoadModule: "evdev"
[    14.674] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    14.710] (II) Module evdev: vendor="X.Org Foundation"
[    14.710]     compiled for 1.8.1.902, module version = 2.4.0
[    14.710]     Module class: X.Org XInput Driver
[    14.710]     ABI class: X.Org XInput driver, version 9.0
[    14.710] (**) Power Button: always reports core events
[    14.710] (**) Power Button: Device: "/dev/input/event3"
[    14.717] (II) Power Button: Found keys
[    14.717] (II) Power Button: Configuring as keyboard
[    14.717] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    14.717] (**) Option "xkb_rules" "evdev"
[    14.717] (**) Option "xkb_model" "evdev"
[    14.717] (**) Option "xkb_layout" "us"
[    14.762] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    14.762] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    14.762] (**) Video Bus: always reports core events
[    14.762] (**) Video Bus: Device: "/dev/input/event4"
[    14.770] (II) Video Bus: Found keys
[    14.770] (II) Video Bus: Configuring as keyboard
[    14.770] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    14.770] (**) Option "xkb_rules" "evdev"
[    14.771] (**) Option "xkb_model" "evdev"
[    14.771] (**) Option "xkb_layout" "us"
[    14.772] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    14.772] (II) No input driver/identifier specified (ignoring)
[    14.773] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    14.773] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    14.773] (**) Sleep Button: always reports core events
[    14.773] (**) Sleep Button: Device: "/dev/input/event2"
[    14.777] (II) Sleep Button: Found keys
[    14.777] (II) Sleep Button: Configuring as keyboard
[    14.777] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[    14.777] (**) Option "xkb_rules" "evdev"
[    14.777] (**) Option "xkb_model" "evdev"
[    14.777] (**) Option "xkb_layout" "us"
[    14.779] (II) config/udev: Adding input device Twinhan Tech Remote Control (/dev/input/event8)
[    14.779] (**) Twinhan Tech Remote Control: Applying InputClass "evdev keyboard catchall"
[    14.779] (**) Twinhan Tech Remote Control: always reports core events
[    14.779] (**) Twinhan Tech Remote Control: Device: "/dev/input/event8"
[    14.784] (II) Twinhan Tech Remote Control: Found keys
[    14.784] (II) Twinhan Tech Remote Control: Configuring as keyboard
[    14.784] (II) XINPUT: Adding extended input device "Twinhan Tech Remote Control" (type: KEYBOARD)
[    14.784] (**) Option "xkb_rules" "evdev"
[    14.784] (**) Option "xkb_model" "evdev"
[    14.784] (**) Option "xkb_layout" "us"
[    14.784] (II) config/udev: Adding input device Twinhan Tech Remote Control (/dev/input/event9)
[    14.784] (**) Twinhan Tech Remote Control: Applying InputClass "evdev pointer catchall"
[    14.784] (**) Twinhan Tech Remote Control: always reports core events
[    14.785] (**) Twinhan Tech Remote Control: Device: "/dev/input/event9"
[    14.794] (II) Twinhan Tech Remote Control: Found 3 mouse buttons
[    14.794] (II) Twinhan Tech Remote Control: Found relative axes
[    14.794] (II) Twinhan Tech Remote Control: Found x and y relative axes
[    14.794] (II) Twinhan Tech Remote Control: Configuring as mouse
[    14.794] (**) Twinhan Tech Remote Control: YAxisMapping: buttons 4 and 5
[    14.794] (**) Twinhan Tech Remote Control: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    14.794] (II) XINPUT: Adding extended input device "Twinhan Tech Remote Control" (type: MOUSE)
[    14.794] (**) Twinhan Tech Remote Control: (accel) keeping acceleration scheme 1
[    14.794] (**) Twinhan Tech Remote Control: (accel) acceleration profile 0
[    14.794] (**) Twinhan Tech Remote Control: (accel) acceleration factor: 2.000
[    14.794] (**) Twinhan Tech Remote Control: (accel) acceleration threshold: 4
[    14.794] (II) Twinhan Tech Remote Control: initialized for relative axes.
[    14.794] (II) config/udev: Adding input device Twinhan Tech Remote Control (/dev/input/mouse1)
[    14.794] (II) No input driver/identifier specified (ignoring)
[    14.795] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[    14.795] (II) No input driver/identifier specified (ignoring)
[    14.797] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    14.797] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    14.797] (**) AT Translated Set 2 keyboard: always reports core events
[    14.797] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    14.807] (II) AT Translated Set 2 keyboard: Found keys
[    14.807] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    14.807] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    14.807] (**) Option "xkb_rules" "evdev"
[    14.807] (**) Option "xkb_model" "evdev"
[    14.807] (**) Option "xkb_layout" "us"
[    14.808] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[    14.808] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    14.808] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    14.808] (II) LoadModule: "synaptics"
[    14.808] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    14.857] (II) Module synaptics: vendor="X.Org Foundation"
[    14.857]     compiled for 1.8.0.902, module version = 1.2.2
[    14.857]     Module class: X.Org XInput Driver
[    14.857]     ABI class: X.Org XInput driver, version 9.0
[    14.857] (II) Synaptics touchpad driver version 1.2.2
[    14.857] (**) Option "Device" "/dev/input/event7"
[    14.930] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[    14.930] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[    14.930] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    14.930] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[    14.930] (II) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    14.930] (**) Option "TapButton1" "1"
[    14.930] (**) Option "TapButton2" "2"
[    14.930] (**) Option "TapButton3" "3"
[    14.973] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    14.973] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    14.993] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[    14.993] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    14.993] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[    14.993] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    14.993] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    15.023] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    15.023] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    15.023] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    15.023] (II) Synaptics touchpad driver version 1.2.2
[    15.650] SynPS/2 Synaptics TouchPad no synaptics event device found
[    15.650] (**) Option "Device" "/dev/input/mouse0"
[    15.670] (**) Option "TapButton1" "1"
[    15.670] (**) Option "TapButton2" "2"
[    15.670] (**) Option "TapButton3" "3"
[    15.691] Query no Synaptics: 6003C8
[    15.691] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[    15.691] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
[    15.717] (EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
[    15.717] (II) UnloadModule: "synaptics"
[    15.717] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event10)
[    15.717] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[    15.717] (**) TPPS/2 IBM TrackPoint: Applying InputClass "Wheel Emulation"
[    15.717] (**) TPPS/2 IBM TrackPoint: always reports core events
[    15.717] (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event10"
[    15.744] (II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[    15.744] (II) TPPS/2 IBM TrackPoint: Found relative axes
[    15.744] (II) TPPS/2 IBM TrackPoint: Found x and y relative axes
[    15.744] (II) TPPS/2 IBM TrackPoint: Configuring as mouse
[    15.744] (**) Option "Emulate3Buttons" "true"
[    15.744] (II) TPPS/2 IBM TrackPoint: Forcing middle mouse button emulation on.
[    15.744] (**) Option "EmulateWheel" "true"
[    15.744] (**) Option "EmulateWheelButton" "2"
[    15.744] (**) Option "EmulateWheelTimeout" "200"
[    15.744] (**) Option "YAxisMapping" "4 5"
[    15.744] (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[    15.744] (**) Option "XAxisMapping" "6 7"
[    15.744] (**) TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
[    15.744] (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    15.744] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
[    15.744] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[    15.744] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[    15.744] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[    15.744] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[    15.744] (II) TPPS/2 IBM TrackPoint: initialized for relative axes.
[    15.745] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2)
[    15.745] (**) TPPS/2 IBM TrackPoint: Applying InputClass "Wheel Emulation"
[    15.745] (II) No input driver/identifier specified (ignoring)
[    15.745] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[    15.745] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[    15.745] (**) ThinkPad Extra Buttons: always reports core events
[    15.745] (**) ThinkPad Extra Buttons: Device: "/dev/input/event5"
[    15.770] (II) ThinkPad Extra Buttons: Found keys
[    15.770] (II) ThinkPad Extra Buttons: Configuring as keyboard
[    15.770] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
[    15.770] (**) Option "xkb_rules" "evdev"
[    15.770] (**) Option "xkb_model" "evdev"
[    15.771] (**) Option "xkb_layout" "us"
[    24.638] (II) intel(0): EDID vendor "LEN", prod id 16435
[    24.638] (II) intel(0): Printing DDC gathered Modelines:
[    24.638] (II) intel(0): Modeline "1440x900"x0.0  102.00  1440 1488 1520 1832  900 903 909 926 -hsync -vsync (55.7 kHz)
[    24.638] (II) intel(0): Modeline "1440x900"x0.0   84.82  1440 1488 1520 1832  900 903 909 926 -hsync -vsync (46.3 kHz)
[    24.820] (II) intel(0): EDID vendor "LEN", prod id 16435
[    24.820] (II) intel(0): Printing DDC gathered Modelines:
[    24.820] (II) intel(0): Modeline "1440x900"x0.0  102.00  1440 1488 1520 1832  900 903 909 926 -hsync -vsync (55.7 kHz)
[    24.820] (II) intel(0): Modeline "1440x900"x0.0   84.82  1440 1488 1520 1832  900 903 909 926 -hsync -vsync (46.3 kHz)
[    25.007] (II) intel(0): EDID vendor "LEN", prod id 16435
[    25.007] (II) intel(0): Printing DDC gathered Modelines:
[    25.007] (II) intel(0): Modeline "1440x900"x0.0  102.00  1440 1488 1520 1832  900 903 909 926 -hsync -vsync (55.7 kHz)
[    25.007] (II) intel(0): Modeline "1440x900"x0.0   84.82  1440 1488 1520 1832  900 903 909 926 -hsync -vsync (46.3 kHz)
[    27.535] (II) intel(0): EDID vendor "LEN", prod id 16435
[    27.535] (II) intel(0): Printing DDC gathered Modelines:
[    27.535] (II) intel(0): Modeline "1440x900"x0.0  102.00  1440 1488 1520 1832  900 903 909 926 -hsync -vsync (55.7 kHz)
[    27.535] (II) intel(0): Modeline "1440x900"x0.0   84.82  1440 1488 1520 1832  900 903 909 926 -hsync -vsync (46.3 kHz)
[    39.028] (II) intel(0): EDID vendor "LEN", prod id 16435
[    39.028] (II) intel(0): Printing DDC gathered Modelines:
[    39.028] (II) intel(0): Modeline "1440x900"x0.0  102.00  1440 1488 1520 1832  900 903 909 926 -hsync -vsync (55.7 kHz)
[    39.028] (II) intel(0): Modeline "1440x900"x0.0   84.82  1440 1488 1520 1832  900 903 909 926 -hsync -vsync (46.3 kHz)

Did somebody experience similar delays or has a hint on what might be going on here?

Thanks in advance

Offline

#2 2010-09-17 05:50:00

loafer
Member
From: the pub
Registered: 2009-04-14
Posts: 1,772

Re: Slow Gnome/Compiz/Emerald startup

It could be related to these long discussions.

https://bugs.archlinux.org/task/16818
https://bbs.archlinux.org/viewtopic.php?pid=634824

and an article in the Wiki:

http://wiki.archlinux.org/index.php/Gno … first_time

Last edited by loafer (2010-09-17 05:51:42)

All men have stood for freedom...
For freedom is the man that will turn the world upside down.
Gerrard Winstanley.

Offline

#3 2010-09-17 15:59:59

stqn
Member
Registered: 2010-03-19
Posts: 1,191
Website

Re: Slow Gnome/Compiz/Emerald startup

Please read http://wiki.archlinux.org/index.php/For … s_and_Code

Offline

#4 2010-09-17 16:18:20

hokasch
Member
Registered: 2007-09-23
Posts: 1,461

Re: Slow Gnome/Compiz/Emerald startup

How do you start compiz? The "preferred" autostart method is a lot faster than with fusion-icon for me.

Offline

Pages: 1

Board footer

Powered by FluxBB