You are not logged in.

#1 2010-10-02 03:16:02

Rothsdad
Member
Registered: 2009-09-01
Posts: 13

i3如何配置才能支持中文呢?

我在arch上用i3作wm,但不知到怎样配置才能支持中文,网上这方面的资料很少啊,还请高手帮忙!

Offline

#2 2010-10-02 03:30:25

hitsmaxft
Member
From: guangzhou
Registered: 2010-06-02
Posts: 13
Website

Re: i3如何配置才能支持中文呢?

什么算是支持中文? 输入法,字体,还是??

Offline

#3 2010-10-03 06:19:39

Rothsdad
Member
Registered: 2009-09-01
Posts: 13

Re: i3如何配置才能支持中文呢?

每个窗体的title显示不能显示中文,出现都是"方块"

Offline

#4 2010-10-07 03:31:25

flay0303
Member
Registered: 2010-01-26
Posts: 29

Re: i3如何配置才能支持中文呢?

我是这样配置的
title可以显示中文
不过你要把字体文件的路径加到xorg.conf

$cat .i3/config
# This configuration uses Mod1 and Mod3. Make sure they are mapped properly using xev(1)
# and xmodmap(1). Usually, Mod1 is Alt (Alt_L) and Mod4 is Windows (Super_L)

# ISO 10646 = Unicode
#font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
#font -*-courier new-medium-r-normal-*-14-160-*-*-*-*-*-*
#font -*-fangsong_gb2312-medium-r-normal-*-14-120-*-*-*-*-iso10646-*
#font -*-kaiti_gb2312-medium-r-normal-*-14-160-*-*-*-*-iso10646-*
font -misc-wenquanyi micro hei-medium-r-normal-*-14-*-*-*-*-*-iso10646-*

# Use Mouse+Mod1 to drag floating windows to their wanted position
floating_modifier Mod1

# Fullscreen (Mod1+f)
bind Mod1+41 f

# Stacking (Mod1+h)
bind Mod1+43 s

# Tabbed (Mod1+w)
bind Mod1+25 T

# Default (Mod1+e)
bind Mod1+26 d

# Toggle tiling/floating of the current window (Mod1+Shift+Space)
bind Mod1+Shift+65 t

# Go into the tiling layer / floating layer, depending on whether
# the current window is tiling / floating (Mod1+t)
bind Mod1+28 focus ft

# Focus (Mod1+j/k/l/;)
bind Mod1+44 h
bind Mod1+45 j
bind Mod1+46 k
bind Mod1+47 l
# (alternatively, you can use the cursor keys:)
bindsym Mod1+Left h
bindsym Mod1+Down j
bindsym Mod1+Up k
bindsym Mod1+Right l

# Focus Container (Mod4+j/k/l/;)
bind Mod4+44 wch
bind Mod4+45 wcj
bind Mod4+46 wck
bind Mod4+47 wcl
# (alternatively, you can use the cursor keys:)
bindsym Mod4+Left wch
bindsym Mod4+Down wcj
bindsym Mod4+Up wck
bindsym Mod4+Right wcl

# Snap (Mod1+Control+j/k/l/;)
bind Mod1+Control+44 sh
bind Mod1+Control+45 sj
bind Mod1+Control+46 sk
bind Mod1+Control+47 sl
# (alternatively, you can use the cursor keys:)
bindsym Mod1+Control+Left sh
bindsym Mod1+Control+Down sj
bindsym Mod1+Control+Up sk
bindsym Mod1+Control+Right sl

# Move (Mod1+Shift+j/k/l/;)
bind Mod1+Shift+44 mh
bind Mod1+Shift+45 mj
bind Mod1+Shift+46 mk
bind Mod1+Shift+47 ml
# (alternatively, you can use the cursor keys:)
bindsym Mod1+Shift+Left mh
bindsym Mod1+Shift+Down mj
bindsym Mod1+Shift+Up mk
bindsym Mod1+Shift+Right ml

# Move Container (Mod4+Shift+j/k/l/;)
bind Mod4+Shift+44 wcmh
bind Mod4+Shift+45 wcmj
bind Mod4+Shift+46 wcmk
bind Mod4+Shift+47 wcml

# Workspaces (Mod1+1/2/…)
bind Mod1+10 1
bind Mod1+11 2
bind Mod1+12 3
bind Mod1+13 4
bind Mod1+14 5
bind Mod1+15 6
bind Mod1+16 7
bind Mod1+17 8
bind Mod1+18 9
bind Mod1+19 10

# Move to Workspaces
bind Mod1+Shift+10 m1
bind Mod1+Shift+11 m2
bind Mod1+Shift+12 m3
bind Mod1+Shift+13 m4
bind Mod1+Shift+14 m5
bind Mod1+Shift+15 m6
bind Mod1+Shift+16 m7
bind Mod1+Shift+17 m8
bind Mod1+Shift+18 m9
bind Mod1+Shift+19 m10

# Mod1+Enter starts a new terminal
#bind Mod1+36 exec /usr/bin/xterm

# define by myself 
bindsym Mod4+e exec /usr/bin/pcmanfm
bindsym Mod4+r exec /usr/bin/xterm
bindsym Mod4+o exec /usr/bin/opera
bindsym Mod4+t exec /usr/bin/xterm -e top
bindsym Mod4+f exec /usr/bin/firefox
bindsym Mod4+s exec /usr/bin/stardict
bindsym Mod4+b exec /usr/bin/thunderbird
bindsym Mod4+m exec /usr/bin/xterm -e mutt
bindsym Mod4+p exec /usr/bin/leafpad
bindsym Mod4+x exec /usr/bin/linux-fetion
bindsym Mod4+a exec /usr/bin/amule
bindsym Mod4+n exec /usr/bin/soffice
bindsym Mod4+g exec /usr/bin/chromium

bindsym Mod4+F12 exec /usr/bin/amixer sset Master,0 5+
bindsym Mod4+F11 exec /usr/bin/amixer sset Master,0 5-
bindsym Mod4+F10 exec /usr/bin/amixer sset Master,0 toggle
bindsym Mod4+F9  exec /home/flay/bin/mysuspend

# lock the screen use xlock
bindsym Mod4+F6 exec /usr/bin/xlock -nice 19 -mode random

# Mod1+Shift+q kills the current client
bind Mod1+Shift+24 kill
bindsym Mod1+F4 kill

# Mod1+v starts dmenu and launches the selected application
# for now, we don't have a launcher of our own.
bind Mod1+55 exec /usr/bin/dmenu_run

# Mod1+Shift+e exits i3
bind Mod1+Shift+26 exit

# Mod1+Shift+r restarts i3 inplace
bind Mod1+Shift+27 restart

# Mod1+Shift+w reloads i3
bindsym Mod1+Shift+w reload

# The IPC interface allows programs like an external workspace bar
# (i3-wsbar) or i3-msg (can be used to "remote-control" i3) to work.
ipc-socket ~/.i3/ipc.sock

#############################################################
# DELETE THE FOLLOWING LINES TO DISABLE THE WELCOME MESSAGE #
#############################################################
#exec xmessage -file /etc/i3/welcome

############################################################
#   Layout mode for new container
############################################################
new_container tabbed

############################################################
#   Automatically starting applications on i3 startup
############################################################
exec /usr/bin/xterm -e screen
#exec /usr/bin/i3status | dzen2 -ta r -x 200 -y 780

Offline

Board footer

Powered by FluxBB