You are not logged in.

Pages: 1 … 10 11 12 13 14 … 19

#276 2010-08-28 02:15:32

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: Scrotwm / Spectrwm

hellomynameisphil wrote:

How would i use 'urxvtcd -e tmux' as my spawn_term command, so that when I hit Mod+Shift+Return, urxvtcd opens and runs tmux? I put "urxvtcd -e tmux" in .scrotwm.conf, with and without quotes, but neither works.

urxvtd is the daemon, urxvtc is the client. I'm not sure of the syntax for the scrotwm.conf, but you should probably try "urxvtc -e tmux" - and lauch the daemon from your .xinitrc...

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#277 2010-08-28 05:10:11

riverrun
Member
Registered: 2010-08-27
Posts: 12

Re: Scrotwm / Spectrwm

As an another example, here's my baraction.sh
It's a lot simpler than the wiki example, but in addition it also gives me some basic info about the status of my Internet connection and the main processes running.

#!/bin/bash
# baraction.sh for scrotwm status bar

SLEEP_SEC=5
#loops forever outputting a line every SLEEP_SEC secs
while :; do

    BAT_CHGSTATE=$(cat /proc/acpi/battery/BAT0/state | awk '/charging state/ {print $3}') 
    if [[ $BAT_CHGSTATE = discharging ]]; then
        AC_STATUS="ON BATT"
    else
        AC_STATUS="ON AC"
    fi
    POWER_STR="$AC_STATUS $BAT_CHGSTATE"

    #scrotwm bar_print can't handle UTF-8 characters, such as degree symbols
    CORE0TEMP=$(cat /proc/acpi/thermal_zone/TZS0/temperature | awk '{print $2}')
    CORE1TEMP=$(cat /proc/acpi/thermal_zone/TZS1/temperature | awk '{print $2}')
    TEMP_STR="Cpu temp = $CORE0TEMP,$CORE1TEMP"

    if [[ -n $(grep eth0 /proc/net/route) ]]; then
        NET_STR="Wired connection"
    elif [[ -n $(grep wlan0 /proc/net/route) ]]; then
        WLAN_ESSID=$(iwconfig wlan0 | awk -F "\"" '/wlan0/ {print $2}')
        NET_STR="Connected to $WLAN_ESSID"
    else
        NET_STR="No connection"
    fi

    CPULOAD_STR="Load:$(uptime | sed 's/.*://; s/,//g')"

    if [[ -n $(amixer get PCM | grep off) ]]; then
        VOL_STR="Mute"
    else
        VOLUME=$(amixer get PCM | tail -1 | awk '{print $5}' | tr -d '[]') 
        VOL_STR="Vol. $VOLUME"
    fi
    
    eval $(top -b -n 1 | awk 'NR==8,NR==10 {print $12,$9,$10}' | tr '\n' ' ' | awk '{printf "PROC1=%s; PROC1_C=%s; PROC1_M=%s;\
    PROC2=%s; PROC2_C=%s; PROC2_M=%s; PROC3=%s; PROC3_C=%s; PROC3_M=%s", $1,$2,$3,$4,$5,$6,$7,$8,$9};' -)
    PROC_STR="$PROC1: Cpu $PROC1_C% Mem $PROC1_M% :: $PROC2: Cpu $PROC2_C% Mem $PROC2_M% :: $PROC3: Cpu $PROC3_C% Mem $PROC3_M%"

    eval $(date "+DATE_DAY=%a DATE_MTH=%b DATE_NUM=%d DATE_TM=%R")
    DATE_STR="$DATE_DAY, $DATE_MTH $DATE_NUM :: $DATE_TM"

    echo -e "$POWER_STR  |  $TEMP_STR  |  $CPULOAD_STR  |  $NET_STR  |  $VOL_STR  |  $PROC_STR  |  $DATE_STR"

    sleep $SLEEP_SEC
done

Edited: Much simpler version, and added volume info.

Last edited by riverrun (2010-09-27 08:25:10)

git

Offline

#278 2010-08-28 21:55:44

hellomynameisphil
Member
From: /home/phil/Vancouver
Registered: 2009-10-02
Posts: 257
Website

Re: Scrotwm / Spectrwm

jasonwryan wrote:

urxvtd is the daemon, urxvtc is the client. I'm not sure of the syntax for the scrotwm.conf, but you should probably try "urxvtc -e tmux" - and lauch the daemon from your .xinitrc...

Thanks, Jason. Actually, urxvtcd is this script:

#!/bin/sh

urxvtc "$@"
if [ $? -eq 2 ]; then
    urxvtd -q -o -f
    urxvtc "$@"
fi

Basically, it tries to run the client and it if can't because the server is not running, it starts the server and then tries to launch the client again.

Anyway, I will try updating to a more recent version of scrotwm and see if that makes this any easier.

Offline

#279 2010-08-30 20:17:27

skanky
Member
From: WAIS
Registered: 2009-10-23
Posts: 1,847

Re: Scrotwm / Spectrwm

My spawn_term command launched (not using scrotwm atm, but it's still installed) the same script as that and works. I don't pass in any parameters in that one, but other program specs call the same script and do pass in -e parameters. They all work too. None of them are called with quotes.

You could wrap the urxvtcd script with one that passes the -e tmux call and call that from scrotwm?

"...one cannot be angry when one looks at a penguin."  - John Ruskin
"Life in general is a bit shit, and so too is the internet. And that's all there is." - scepticisle

Offline

#280 2010-08-31 06:09:09

hellomynameisphil
Member
From: /home/phil/Vancouver
Registered: 2009-10-02
Posts: 257
Website

Re: Scrotwm / Spectrwm

Yes, I created a script called turxvtcd which consists of the line 'urxvtcd -e tmux'. I would still rather find a nicer solution, but I also like stuff that works.

Offline

#281 2010-09-16 02:37:57

marco_p
Member
Registered: 2009-02-09
Posts: 81

Re: Scrotwm / Spectrwm

Several patches went into the cvs repository the big one being basic support for EWMH.  Please test and report back.

I broke down due to community pressure and put up a wiki at http://opensource.conformal.com/wiki/Scrotwm
The CVS repo also moved to conformal and it is at: CVSROOT=anoncvs@opensource.conformal.com:/anoncvs/scrotwm

Offline

#282 2010-09-16 12:38:18

virus_found
Member
From: Moscow
Registered: 2009-05-22
Posts: 51
Website

Re: Scrotwm / Spectrwm

Great news, but it tells me:

Makefile:2: *** missing separator.  Stop.

when I do:

make PREFIX=/usr

http://boycottsystemd.org/

Offline

#283 2010-09-16 15:45:01

OpenBSD
Member
Registered: 2009-02-04
Posts: 43

Re: Scrotwm / Spectrwm

virus_found wrote:

Great news, but it tells me:

Makefile:2: *** missing separator.  Stop.

when I do:

make PREFIX=/usr

User error.
Compiles w/o problem on OpenBSD and Arch.

cd linux
make PREFIX=/usr
sudo make install

Offline

#284 2010-09-16 16:02:48

virus_found
Member
From: Moscow
Registered: 2009-05-22
Posts: 51
Website

Re: Scrotwm / Spectrwm

Yes, certainly, there was no "linux" directory last time I revised my PKGBUILD for scrotwm. Thanks.

http://boycottsystemd.org/

Offline

#285 2010-09-16 16:40:10

OpenBSD
Member
Registered: 2009-02-04
Posts: 43

Re: Scrotwm / Spectrwm

virus_found wrote:

Yes, certainly, there was no "linux" directory last time I revised my PKGBUILD for scrotwm. Thanks.

export CVS_RSH=/usr/bin/ssh
cvs -d anoncvs@opensource.conformal.com:/anoncvs/scrotwm get scrotwm

Offline

#286 2010-09-16 19:30:35

keenerd
Package Maintainer (PM)
Registered: 2007-02-22
Posts: 647
Website

Re: Scrotwm / Spectrwm

virus_found wrote:

Yes, certainly, there was no "linux" directory last time I revised my PKGBUILD for scrotwm. Thanks.

Feel free to crib from http://aur.archlinux.org/packages.php?ID=23487 and http://aur.archlinux.org/packages.php?ID=31789

Offline

#287 2010-10-12 17:25:10

forwardslash
Member
Registered: 2010-06-03
Posts: 6

Re: Scrotwm / Spectrwm

I have been trying out ScrotWM on my new notebook and I quite like it. Having trouble customizing the themes though, is there a specific location that ScrotWM looks for GTK themes? And if it just defaults off of the default location, where is it?

Nevermind, I figured it out, I had some files named improperly. Loving ScrotWM thus far, definitely will be using it from now on.

Last edited by forwardslash (2010-10-13 14:34:17)

Offline

#288 2010-10-19 19:45:01

marco_p
Member
Registered: 2009-02-09
Posts: 81

Re: Scrotwm / Spectrwm

I dropped a new version.

See: http://opensource.conformal.com/snapsho … 0.9.27.tgz

Offline

#289 2010-10-20 10:59:24

keenerd
Package Maintainer (PM)
Registered: 2007-02-22
Posts: 647
Website

Re: Scrotwm / Spectrwm

Whooo EWMH.  So, what does this mean?  You can have a tray.  Or a dock.  And it won't fill up half your screen.

If you like eye candy and wasting screen real estate: lightest tray is trayer (in extra).  Lightest dock/launcher is adeskbar (in AUR).

Marco, I do believe you can close that one feature request :-)

But it is replaced with two more feature requests.  I can't seem to reserve space for the bar.  Tried setting a smaller region, to no avail.  It also does not carry across workspaces. (Or did I miss a quirk?)

Also, there is not enough support of the standard to make wmctrl useful.

Offline

#290 2010-10-22 00:58:55

marco_p
Member
Registered: 2009-02-09
Posts: 81

Re: Scrotwm / Spectrwm

Please log requests at: http://opensource.conformal.com/flyspra … t=8&status[]=

You can fart with regions to get the are for the bar but that blows.  I'll do something simpler in the future.  Just make sure you log the requests so that I don't forget.

Diffs welcome too :-)

Offline

#291 2010-10-22 07:30:49

keenerd
Package Maintainer (PM)
Registered: 2007-02-22
Posts: 647
Website

Re: Scrotwm / Spectrwm

Super alpha why-am-even-posting-this patch.  Tabs/spaces are messed up and it does not handle the Mod+b elegantly.  Needs testing.  I have no clue what it will do on multihead.

This patch makes it simple to reserve a chunk of the edge of the screen and shows select apps on all workspaces.

Add 

edge = N/E/S/W

to your conf, where N is the pixels on the north edge, etc.  So "edge = 0/0/0/0" reserves no space.

There is a new quirk, PINNED, that will carry apps across all workspaces.  It is automatically applied to docks/trays/whatnot.  I am considering rewriting send_to_ws().  Right now you can not tell it to move a particular window.  Instead it finds the focused window and moves that.  Little too magic for my taste, and this patch has to dance around it.  Will probably break it into send_win_to_ws() and send_focused_to_ws(), the latter being a thin wrapper.

--- scrotwm.c.orig    2010-10-22 02:28:47.000000000 -0400
+++ scrotwm.c    2010-10-23 12:52:15.000000000 -0400
@@ -203,6 +203,7 @@ int            bar_extra = 1;
 int            bar_extra_running = 0;
 int            bar_verbose = 1;
 int            bar_height = 0;
+int            edge[] = {0,0,0,0};
 int            stack_enabled = 1;
 int            clock_enabled = 1;
 char            *clock_format = NULL;
@@ -400,6 +401,7 @@ struct quirk {
 #define SWM_Q_ANYWHERE        (1<<2)    /* don't position this window */
 #define SWM_Q_XTERM_FONTADJ    (1<<3)    /* adjust xterm fonts when resizing */
 #define SWM_Q_FULLSCREEN    (1<<4)    /* remove border */
+#define SWM_Q_PINNED        (1<<5)    /* pin to all workspaces */
 };
 int                quirks_size = 0, quirks_length = 0;
 struct quirk            *quirks = NULL;
@@ -549,7 +551,7 @@ ewmh_autoquirk(struct ws_win *win)
             type == ewmh[_NET_WM_WINDOW_TYPE_TOOLBAR].atom ||
             type == ewmh[_NET_WM_WINDOW_TYPE_UTILITY].atom) {
             win->floating = 1;
-            win->quirks = SWM_Q_FLOAT | SWM_Q_ANYWHERE;
+            win->quirks = SWM_Q_FLOAT | SWM_Q_ANYWHERE | SWM_Q_PINNED;
             break;
         }
         if (type == ewmh[_NET_WM_WINDOW_TYPE_SPLASH].atom ||
@@ -1851,6 +1853,18 @@ switchws(struct swm_region *r, union arg
         return;
     if (new_ws == old_ws)
         return;
+    
+    /* drag pinned apps along */
+    a.id = new_ws->idx;
+    TAILQ_FOREACH(win, &old_ws->winlist, entry) {
+        if (win->quirks && SWM_Q_PINNED) {
+        /* what to move is inferred from what is focused */
+        old_ws->focus_prev = old_ws->focus;
+        old_ws->focus = win;
+        send_to_ws(win->ws->r, &a);
+        }
+    }
 
     other_r = new_ws->r;
     if (other_r == NULL) {
@@ -2224,6 +2238,11 @@ stack(void) {
                     g.y += bar_height;
                 g.h -= bar_height;
             }
+            /* should probably use max(bar_height, edge[0]) */
+            g.x += edge[3];
+            g.y += edge[0];
+            g.w -= edge[1] + edge[3];
+            g.h -= edge[0] + edge[2];
             r->ws->cur_layout->l_stack(r->ws, &g);
             /* save r so we can track region changes */
             r->ws->old_r = r;
@@ -3786,6 +3805,7 @@ const char *quirkname[] = {
     "ANYWHERE",
     "XTERM_FONTADJ",
     "FULLSCREEN",
+    "PINNED",
 };
 
 /* SWM_Q_WS: retain '|' for back compat for now (2009-08-11) */
@@ -3943,12 +3963,13 @@ enum    { SWM_S_BAR_DELAY, SWM_S_BAR_ENABLE
       SWM_S_TITLE_CLASS_ENABLED, SWM_S_TITLE_NAME_ENABLED,
       SWM_S_FOCUS_MODE, SWM_S_DISABLE_BORDER, SWM_S_BAR_FONT,
       SWM_S_BAR_ACTION, SWM_S_SPAWN_TERM, SWM_S_SS_APP, SWM_S_DIALOG_RATIO,
-      SWM_S_BAR_AT_BOTTOM
+      SWM_S_BAR_AT_BOTTOM, SWM_S_NESW_EDGES
     };
 
 int
 setconfvalue(char *selector, char *value, int flags)
 {
+    int i;
     switch (flags) {
     case SWM_S_BAR_DELAY:
         bar_delay = atoi(value);
@@ -4025,6 +4046,16 @@ setconfvalue(char *selector, char *value
         if (dialog_ratio > 1.0 || dialog_ratio <= .3)
             dialog_ratio = .6;
         break;
+    case SWM_S_NESW_EDGES:
+        /* messy, but I figured adding scratch vars was worse */
+        for (i=0; i<3; i++)
+        {
+            *(strchr(value, '/')) = '\0';
+            edge[i] = atoi(value);
+            value += strlen(value) + 1;
+        }
+        edge[3] = atoi(value);
+        break;
     default:
         return (1);
     }
@@ -4097,6 +4128,7 @@ struct config_option configopt[] = {
     { "title_name_enabled",        setconfvalue,    SWM_S_TITLE_NAME_ENABLED },
     { "focus_mode",            setconfvalue,   SWM_S_FOCUS_MODE },
     { "disable_border",        setconfvalue,   SWM_S_DISABLE_BORDER },
+    { "edge",            setconfvalue,    SWM_S_NESW_EDGES },
 };

Last edited by keenerd (2010-10-23 17:20:00)

Offline

#292 2010-11-21 10:47:59

virus_found
Member
From: Moscow
Registered: 2009-05-22
Posts: 51
Website

Re: Scrotwm / Spectrwm

ssh: Could not resolve hostname opensource.conformal.com: Name or service not known
I hope, it's a temporary problem.

http://boycottsystemd.org/

Offline

#293 2010-11-21 12:35:51

keenerd
Package Maintainer (PM)
Registered: 2007-02-22
Posts: 647
Website

Re: Scrotwm / Spectrwm

I emailed Marco about it.  In the meantime, here is a mirror:
http://kmkeen.com/tmp/scrotwm-0.9.27.tgz

If it stays down another day or two I'll tweak the pkgbuild.

Offline

#294 2011-02-23 12:31:15

dipilibupap
Member
Registered: 2011-02-05
Posts: 47

Re: Scrotwm / Spectrwm

Hi everyone! I'm having a problem with scrotwm-cvs when i yaourt -S scrotwm-cvs.. This is the output:

==> Downloading scrotwm-cvs PKGBUILD from AUR...
x LICENSE
x PKGBUILD
x baraction.sh
x scrotwm.desktop


First Submitted: Fri, 06 Nov 2009 19:38:39 +0000    
scrotwm-cvs 20101022-1 : A minimalistic dynamic tiling window manager that tries to stay out of the way.
( Unsupported package: Potentially dangerous ! )
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> n

==> scrotwm-cvs dependencies:
 - dmenu (already installed)
 - libxrandr (already installed)
 - profont (already installed)
 - cvs (already installed)
 - openssh (already installed)

==> scrotwm-cvs conflicts:
 - scrotwm-0.9.28-1

==> Continue building scrotwm-cvs ? [Y/n]
==> -------------------------------------
==> 
==> Building and installing package
==> Determining latest cvs revision...
  -> Version found: 20110223
==> Making package: scrotwm-cvs 20110223-1 (Wed Feb 23 13:31:27 CET 2011)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
==> Extracting Sources...
==> Starting build()...
==> Connecting to anoncvs.freedaemon.com CVS server....
cvs server: Updating scrotwm
U scrotwm/Makefile
U scrotwm/baraction.sh
U scrotwm/initscreen.sh
U scrotwm/release.sh
U scrotwm/screenshot.sh
U scrotwm/scrotwm.1
U scrotwm/scrotwm.c
U scrotwm/scrotwm.conf
U scrotwm/scrotwm_es.1
U scrotwm/scrotwm_it.1
U scrotwm/scrotwm_pt.1
U scrotwm/scrotwm_ru.1
cvs server: Updating scrotwm/html
U scrotwm/html/cygwin.html
U scrotwm/html/cygwin.png
U scrotwm/html/cygwin_pt.html
U scrotwm/html/cygwin_small.png
U scrotwm/html/license.html
U scrotwm/html/man.html
U scrotwm/html/man_es.html
U scrotwm/html/man_it.html
U scrotwm/html/man_pt.html
U scrotwm/html/man_ru.html
U scrotwm/html/osx.html
U scrotwm/html/osx.jpg
U scrotwm/html/osx1.png
U scrotwm/html/osx2.png
U scrotwm/html/osx3.png
U scrotwm/html/osx4.png
U scrotwm/html/osx5.png
U scrotwm/html/osx_pt.html
U scrotwm/html/osx_small.jpg
U scrotwm/html/scrotwm.html
U scrotwm/html/scrotwm.jpg
U scrotwm/html/scrotwm2.jpg
U scrotwm/html/scrotwm2_small.jpg
U scrotwm/html/scrotwm3.jpg
U scrotwm/html/scrotwm3_small.jpg
U scrotwm/html/scrotwm4.jpg
U scrotwm/html/scrotwm4_small.jpg
U scrotwm/html/scrotwm5.jpg
U scrotwm/html/scrotwm5_small.jpg
U scrotwm/html/scrotwm_es.html
U scrotwm/html/scrotwm_it.html
U scrotwm/html/scrotwm_pt.html
U scrotwm/html/scrotwm_ru.html
U scrotwm/html/scrotwm_small.jpg
cvs server: Updating scrotwm/lib
U scrotwm/lib/Makefile
U scrotwm/lib/shlib_version
U scrotwm/lib/swm_hack.c
cvs server: Updating scrotwm/linux
U scrotwm/linux/Makefile
U scrotwm/linux/linux.c
U scrotwm/linux/util.h
cvs server: Updating scrotwm/osx
U scrotwm/osx/Makefile
U scrotwm/osx/osx.c
U scrotwm/osx/osx.h
cvs server: Updating scrotwm/port
U scrotwm/port/Makefile
U scrotwm/port/distinfo
cvs server: Updating scrotwm/port/patches
U scrotwm/port/patches/patch-scrotwm_c
U scrotwm/port/patches/patch-scrotwm_conf
cvs server: Updating scrotwm/port/pkg
U scrotwm/port/pkg/DESCR
U scrotwm/port/pkg/PFRAG.shared
U scrotwm/port/pkg/PLIST
==> CVS checkout done or server timeout
==> Starting make...
ln -sf ../scrotwm.c
gcc -march=i686 -mtune=generic -O2 -pipe -Wall -ggdb -D_GNU_SOURCE -I. -DSWM_LIB=\"/usr/lib/libswmhack.so.0.0\"   -c -o scrotwm.o scrotwm.c
scrotwm.c: In function ‘send_to_ws’:
scrotwm.c:2789:6: warning: pointer targets in passing argument 1 of ‘snprintf’ differ in signedness
/usr/include/stdio.h:383:12: note: expected ‘char * __restrict__’ but argument is of type ‘unsigned char *’
scrotwm.c: In function ‘manage_window’:
scrotwm.c:4310:3: warning: pointer targets in passing argument 1 of ‘strtonum’ differ in signedness
./util.h:15:11: note: expected ‘const char *’ but argument is of type ‘unsigned char *’
scrotwm.c:4348:6: warning: pointer targets in passing argument 1 of ‘snprintf’ differ in signedness
/usr/include/stdio.h:383:12: note: expected ‘char * __restrict__’ but argument is of type ‘unsigned char *’
gcc -march=i686 -mtune=generic -O2 -pipe -Wall -ggdb -D_GNU_SOURCE -I. -DSWM_LIB=\"/usr/lib/libswmhack.so.0.0\"   -c -o linux.o linux.c
gcc -Wl,--hash-style=gnu -Wl,--as-needed -o scrotwm scrotwm.o linux.o -lX11 -lXrandr
ln -sf ../lib/swm_hack.c
gcc -march=i686 -mtune=generic -O2 -pipe -Wall -ggdb -D_GNU_SOURCE -I. -DSWM_LIB=\"/usr/lib/libswmhack.so.0.0\" -c -fpic -DPIC swm_hack.c -o swm_hack.so
swm_hack.c: In function ‘set_property’:
swm_hack.c:92:8: warning: pointer targets in passing argument 7 of ‘XChangeProperty’ differ in signedness
/usr/include/X11/Xlib.h:2075:12: note: expected ‘const unsigned char *’ but argument is of type ‘char *’
gcc -shared -fpic -o libswmhack.so.0.0 swm_hack.so -lX11 -lXrandr
==> Entering fakeroot environment...
==> Starting package()...
/tmp/yaourt-tmp-robin/aur-scrotwm-cvs/./PKGBUILD: line 51: cd: /tmp/yaourt-tmp-robin/aur-scrotwm-cvs/src/_cvsmod/linux: No such file or directory
    Aborting...
==> ERROR: Makepkg was unable to build scrotwm-cvs.
==> Restart building scrotwm-cvs

any ideas??

Moderator: [ewaller]  Please use code tags around program output; especially long listings.  I added them for you.

Last edited by ewaller (2011-05-08 03:14:33)

http://dotshare.it    >>    #dotshare@freenode

Offline

#295 2011-02-23 12:56:31

keenerd
Package Maintainer (PM)
Registered: 2007-02-22
Posts: 647
Website

Re: Scrotwm / Spectrwm

Fixed.

Offline

#296 2011-04-03 17:47:55

neurolysis
Member
Registered: 2011-02-23
Posts: 112
Website

Re: Scrotwm / Spectrwm

First of all, really excellent work! This has become my wm of choice.

One thing that I've not managed to sort out -- I tried making a quirk for fullscreen flash video in chromium (youtube etc), but it doesn't seem to work. Has anyone got one which works? Without one, it just opens as a new window, and only displays half of the output.

Last edited by neurolysis (2011-04-03 17:50:19)

Offline

#297 2011-04-05 01:22:12

Splex
Member
Registered: 2009-03-09
Posts: 33

Re: Scrotwm / Spectrwm

neurolysis wrote:

First of all, really excellent work! This has become my wm of choice.

One thing that I've not managed to sort out -- I tried making a quirk for fullscreen flash video in chromium (youtube etc), but it doesn't seem to work. Has anyone got one which works? Without one, it just opens as a new window, and only displays half of the output.

Not sure if chromium flash works like firefox, but I got flash to work full screen for firefox by adding the following to scrotwm.conf:

quirk[Npviewer.bin:npviewer.bin] = FLOAT + FULLSCREEN

Last edited by Splex (2011-04-05 01:23:59)

Offline

#298 2011-05-07 19:53:30

teh
Member
From: Tijuana, Mexico
Registered: 2009-07-07
Posts: 374
Website

Re: Scrotwm / Spectrwm

Really really really nice: easy, lightweight, simple. It could be my favorite wm but...

I can't use Super_L (win key) as modkey.

The versions I've tried:

- scrotwm-0.9.28 in the snapshot repo
- scrotwm V0.9.29 (CVS version)

Super_L works perfectly in another WMs (wmii, dwm, wmfs) so is definitely not an xmodmap, xev, keyboard related issue.

None of the tips mentioned here works:
https://bbs.archlinux.org/viewtopic.php?id=102116
https://bbs.archlinux.org/viewtopic.php?id=76119

Any suggestion before I left scrotwm behind?

Thank you in advance.

arst

Offline

#299 2011-05-08 02:31:26

keenerd
Package Maintainer (PM)
Registered: 2007-02-22
Posts: 647
Website

Re: Scrotwm / Spectrwm

Strange.  By default the Arch package uses Mod4/Super/WIndows.  "modkey = Mod4" should just work.  What do you have in your .scrotwm.conf ?

Offline

#300 2011-05-08 04:59:17

teh
Member
From: Tijuana, Mexico
Registered: 2009-07-07
Posts: 374
Website

Re: Scrotwm / Spectrwm

weird...

Scrotwm was using the default conf file located at default directory (like /foo/bar/scrotwm/scrotwm.conf; downloaded and compiled by myself), It solved when I copy /foo/bar/scrotwm/scrotwm.conf to $HOME/.scrotwm.conf

Thank you for replying.

Another weird thing: is it normal a random (a little bit annoying) blinking in border and mouse cursor?
It stops when the layout is changed, but this is not an elegant solution.

arst

Offline

Pages: 1 … 10 11 12 13 14 … 19

Board footer

Powered by FluxBB