You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2010-12-01 15:46:24
- airencracken
- Member
- From: California
- Registered: 2010-04-17
- Posts: 23
[Solved]Headphone Output Greyed Out
Recently got some new hardware (ASUS M4A87TD EVO) and I am rather pleased with it, but for some reason, the headphone output in alsamixer is greyed out now. Not to mention that the output was active until I ran an alsaconf to try and enable my SPIDF output in the back. The headphone output is much more important than the SPDIF one. I'd like to get both working if possible, but mainly the headphone output.
Any help would be appreciated.
lspci -v | grep audio
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
Subsystem: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Flags: bus master, slow devsel, latency 64, IRQ 16
Memory at f9cf4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Kernel driver in use: HDA Intelcat /proc/asound/modules
0 snd_hda_intellsmod
ipv6 282668 18
fuse 62808 3
xt_tcpudp 2567 2
nf_conntrack_ipv4 11197 1
nf_defrag_ipv4 1275 1 nf_conntrack_ipv4
xt_state 1231 1
nf_conntrack 57684 2 nf_conntrack_ipv4,xt_state
xt_iprange 1544 1
iptable_filter 1456 1
ip_tables 17077 1 iptable_filter
x_tables 17192 5 xt_tcpudp,xt_state,xt_iprange,iptable_filter,ip_tables
ext2 64042 1
snd_seq_dummy 1463 0
snd_seq_oss 28792 0
snd_seq_midi_event 5436 1 snd_seq_oss
snd_seq 50146 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 5297 3 snd_seq_dummy,snd_seq_oss,snd_seq
usbhid 38960 0
hid 75944 1 usbhid
nvidia 10031085 28
asus_atk0110 11479 0
thermal 12338 0
ohci_hcd 21879 0
button 4834 0
processor 28966 0
snd_pcm_oss 39189 0
snd_mixer_oss 17106 1 snd_pcm_oss
xhci_hcd 54418 0
ehci_hcd 37024 0
usbcore 146545 5 usbhid,ohci_hcd,xhci_hcd,ehci_hcd
firewire_ohci 23483 0
firewire_core 44810 1 firewire_ohci
crc_itu_t 1297 1 firewire_core
wmi 6894 0
snd_hda_codec_via 54943 1
r8169 38110 0
mii 3826 1 r8169
psmouse 54040 0
snd_hda_intel 22285 1
snd_hda_codec 77223 2 snd_hda_codec_via,snd_hda_intel
snd_hwdep 6110 1 snd_hda_codec
snd_pcm 71445 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer 19265 2 snd_seq,snd_pcm
snd 57626 13 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_via,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 6065 1 snd
snd_page_alloc 7249 2 snd_hda_intel,snd_pcm
evdev 8775 4
edac_core 35286 0
edac_mce_amd 6929 0
i2c_piix4 8992 0
i2c_core 18987 2 nvidia,i2c_piix4
sg 25652 0
serio_raw 4486 0
pcspkr 1819 0
k10temp 2915 0
rtc_cmos 9022 0
rtc_core 14439 1 rtc_cmos
rtc_lib 1898 1 rtc_core
ext4 310908 3
mbcache 5746 2 ext2,ext4
jbd2 69523 1 ext4
crc16 1297 1 ext4
sr_mod 14954 0
cdrom 35851 1 sr_mod
pata_acpi 3248 0
sd_mod 29536 7
ahci 20929 4
pata_jmicron 2448 0
libahci 18846 1 ahci
pata_atiixp 3833 1
libata 157227 5 pata_acpi,ahci,pata_atiixp,pata_jmicron,libahci
scsi_mod 124384 4 sg,sr_mod,sd_mod,libatacat /etc/modprobe.d/modprobe.conf
options snd_hda_intel
options snd_pcsp index=2cat /usr/share/alsa/alsa.conf
#
# ALSA library configuration file
#
# pre-load the configuration files
@hooks [
{
func load
files [
"/etc/asound.conf"
"~/.asoundrc"
]
errors false
}
]
# load card-specific configuration files (on request)
cards.@hooks [
{
func load
files [
{
@func concat
strings [
{ @func datadir }
"/cards/aliases.conf"
]
}
]
}
{
func load_for_all_cards
files [
{
@func concat
strings [
{ @func datadir }
"/cards/"
{ @func private_string }
".conf"
]
}
]
errors false
}
]
#
# defaults
#
# show all name hints also for definitions without hint {} section
defaults.namehint.showall off
# show just basic name hints
defaults.namehint.basic on
# show extended name hints
defaults.namehint.extended off
#
defaults.ctl.card 0
defaults.pcm.card 0
defaults.pcm.device 0
defaults.pcm.subdevice -1
defaults.pcm.nonblock 1
defaults.pcm.ipc_key 5678293
defaults.pcm.ipc_gid audio
defaults.pcm.ipc_perm 0660
defaults.pcm.dmix.max_periods 0
defaults.pcm.dmix.rate 48000
defaults.pcm.dmix.format "unchanged"
defaults.pcm.dmix.card defaults.pcm.card
defaults.pcm.dmix.device defaults.pcm.device
defaults.pcm.dsnoop.card defaults.pcm.card
defaults.pcm.dsnoop.device defaults.pcm.device
defaults.pcm.front.card defaults.pcm.card
defaults.pcm.front.device defaults.pcm.device
defaults.pcm.rear.card defaults.pcm.card
defaults.pcm.rear.device defaults.pcm.device
defaults.pcm.center_lfe.card defaults.pcm.card
defaults.pcm.center_lfe.device defaults.pcm.device
defaults.pcm.side.card defaults.pcm.card
defaults.pcm.side.device defaults.pcm.device
defaults.pcm.surround40.card defaults.pcm.card
defaults.pcm.surround40.device defaults.pcm.device
defaults.pcm.surround41.card defaults.pcm.card
defaults.pcm.surround41.device defaults.pcm.device
defaults.pcm.surround50.card defaults.pcm.card
defaults.pcm.surround50.device defaults.pcm.device
defaults.pcm.surround51.card defaults.pcm.card
defaults.pcm.surround51.device defaults.pcm.device
defaults.pcm.surround71.card defaults.pcm.card
defaults.pcm.surround71.device defaults.pcm.device
defaults.pcm.iec958.card defaults.pcm.card
defaults.pcm.iec958.device defaults.pcm.device
defaults.pcm.modem.card defaults.pcm.card
defaults.pcm.modem.device defaults.pcm.device
# truncate files via file or tee PCM
defaults.pcm.file_format "raw"
defaults.pcm.file_truncate true
defaults.rawmidi.card 0
defaults.rawmidi.device 0
defaults.rawmidi.subdevice -1
defaults.hwdep.card 0
defaults.hwdep.device 0
defaults.timer.class 2
defaults.timer.sclass 0
defaults.timer.card 0
defaults.timer.device 0
defaults.timer.subdevice 0
#
# PCM interface
#
# redirect to load-on-demand extended pcm definitions
pcm.cards cards.pcm
pcm.default cards.pcm.default
pcm.front cards.pcm.front
pcm.rear cards.pcm.rear
pcm.center_lfe cards.pcm.center_lfe
pcm.side cards.pcm.side
pcm.surround40 cards.pcm.surround40
pcm.surround41 cards.pcm.surround41
pcm.surround50 cards.pcm.surround50
pcm.surround51 cards.pcm.surround51
pcm.surround71 cards.pcm.surround71
pcm.iec958 cards.pcm.iec958
pcm.spdif iec958
pcm.hdmi cards.pcm.hdmi
pcm.dmix cards.pcm.dmix
pcm.dsnoop cards.pcm.dsnoop
pcm.modem cards.pcm.modem
pcm.phoneline cards.pcm.phoneline
pcm.hw {
@args [ CARD DEV SUBDEV ]
@args.CARD {
type string
default {
@func getenv
vars [
ALSA_PCM_CARD
ALSA_CARD
]
default {
@func refer
name defaults.pcm.card
}
}
}
@args.DEV {
type integer
default {
@func igetenv
vars [
ALSA_PCM_DEVICE
]
default {
@func refer
name defaults.pcm.device
}
}
}
@args.SUBDEV {
type integer
default {
@func refer
name defaults.pcm.subdevice
}
}
type hw
card $CARD
device $DEV
subdevice $SUBDEV
hint {
show {
@func refer
name defaults.namehint.extended
}
description "Direct hardware device without any conversions"
}
}
pcm.plughw {
@args [ CARD DEV SUBDEV ]
@args.CARD {
type string
default {
@func getenv
vars [
ALSA_PCM_CARD
ALSA_CARD
]
default {
@func refer
name defaults.pcm.card
}
}
}
@args.DEV {
type integer
default {
@func igetenv
vars [
ALSA_PCM_DEVICE
]
default {
@func refer
name defaults.pcm.device
}
}
}
@args.SUBDEV {
type integer
default {
@func refer
name defaults.pcm.subdevice
}
}
type plug
slave.pcm {
type hw
card $CARD
device $DEV
subdevice $SUBDEV
}
hint {
show {
@func refer
name defaults.namehint.extended
}
description "Hardware device with all software conversions"
}
}
pcm.plug {
@args [ SLAVE ]
@args.SLAVE {
type string
}
type plug
slave.pcm $SLAVE
}
pcm.shm {
@args [ SOCKET PCM ]
@args.SOCKET {
type string
}
@args.PCM {
type string
}
type shm
server $SOCKET
pcm $PCM
}
pcm.tee {
@args [ SLAVE FILE FORMAT ]
@args.SLAVE {
type string
}
@args.FILE {
type string
}
@args.FORMAT {
type string
default {
@func refer
name defaults.pcm.file_format
}
}
type file
slave.pcm $SLAVE
file $FILE
format $FORMAT
truncate {
@func refer
name defaults.pcm.file_truncate
}
}
pcm.file {
@args [ FILE FORMAT ]
@args.FILE {
type string
}
@args.FORMAT {
type string
default {
@func refer
name defaults.pcm.file_format
}
}
type file
slave.pcm null
file $FILE
format $FORMAT
truncate {
@func refer
name defaults.pcm.file_truncate
}
}
pcm.null {
type null
hint {
show {
@func refer
name defaults.namehint.basic
}
description "Discard all samples (playback) or generate zero samples (capture)"
}
}
#
# Control interface
#
ctl.default {
type hw
card {
@func getenv
vars [
ALSA_CTL_CARD
ALSA_CARD
]
default {
@func refer
name defaults.ctl.card
}
}
}
ctl.hw {
@args [ CARD ]
@args.CARD {
type string
default {
@func getenv
vars [
ALSA_CTL_CARD
ALSA_CARD
]
default {
@func refer
name defaults.ctl.card
}
}
}
type hw
card $CARD
}
ctl.shm {
@args [ SOCKET CTL ]
@args.SOCKET {
type string
}
@args.CTL {
type string
}
type shm
server $SOCKET
ctl $CTL
}
#
# RawMidi interface
#
rawmidi.default {
type hw
card {
@func getenv
vars [
ALSA_RAWMIDI_CARD
ALSA_CARD
]
default {
@func refer
name defaults.rawmidi.card
}
}
device {
@func igetenv
vars [
ALSA_RAWMIDI_DEVICE
]
default {
@func refer
name defaults.rawmidi.device
}
}
}
rawmidi.hw {
@args [ CARD DEV SUBDEV ]
@args.CARD {
type string
default {
@func getenv
vars [
ALSA_RAWMIDI_CARD
ALSA_CARD
]
default {
@func refer
name defaults.rawmidi.card
}
}
}
@args.DEV {
type integer
default {
@func igetenv
vars [
ALSA_RAWMIDI_DEVICE
]
default {
@func refer
name defaults.rawmidi.device
}
}
}
@args.SUBDEV {
type integer
default -1
}
type hw
card $CARD
device $DEV
subdevice $SUBDEV
hint {
description "Direct rawmidi driver device"
device $DEV
}
}
rawmidi.virtual {
@args [ MERGE ]
@args.MERGE {
type string
default 1
}
type virtual
merge $MERGE
}
#
# Sequencer interface
#
seq.default {
type hw
}
seq.hw {
type hw
}
#
# HwDep interface
#
hwdep.default {
type hw
card {
@func getenv
vars [
ALSA_HWDEP_CARD
ALSA_CARD
]
default {
@func refer
name defaults.hwdep.card
}
}
device {
@func igetenv
vars [
ALSA_HWDEP_DEVICE
]
default {
@func refer
name defaults.hwdep.device
}
}
}
hwdep.hw {
@args [ CARD DEV ]
@args.CARD {
type string
default {
@func getenv
vars [
ALSA_HWDEP_CARD
ALSA_CARD
]
default {
@func refer
name defaults.hwdep.card
}
}
}
@args.DEV {
type integer
default {
@func igetenv
vars [
ALSA_HWDEP_DEVICE
]
default {
@func refer
name defaults.hwdep.device
}
}
}
type hw
card $CARD
device $DEV
}
#
# Timer interface
#
timer_query.default {
type hw
}
timer_query.hw {
type hw
}
timer.default {
type hw
class {
@func refer
name defaults.timer.class
}
sclass {
@func refer
name defaults.timer.sclass
}
card {
@func refer
name defaults.timer.card
}
device {
@func refer
name defaults.timer.device
}
subdevice {
@func refer
name defaults.timer.subdevice
}
hint.description "Default direct hardware timer device"
}
timer.hw {
@args [ CLASS SCLASS CARD DEV SUBDEV ]
@args.CLASS {
type integer
default {
@func refer
name defaults.timer.class
}
}
@args.SCLASS {
type integer
default {
@func refer
name defaults.timer.sclass
}
}
@args.CARD {
type string
default {
@func refer
name defaults.timer.card
}
}
@args.DEV {
type integer
default {
@func refer
name defaults.timer.device
}
}
@args.SUBDEV {
type integer
default {
@func refer
name defaults.timer.subdevice
}
}
type hw
class $CLASS
sclass $SCLASS
card $CARD
device $DEV
subdevice $SUBDEV
}EDIT: It seems like the front mic input isn't working either oddly enough. The really strange thing though is that if a microphone is plugged into that jack, it makes sound cut in and out rapidly over the speakers. Odder still, is that if both headphones and a microphone are plugged in, I hear that rapidly cutting in and out sound though the headphones, albeit very quiet.
Not to mention that now adjusting the PCM output volume doesn't affect the actual output volume at all.
Not sure at all what's going on.
Last edited by airencracken (2010-12-03 07:01:30)
Offline
#2 2010-12-03 07:01:15
- airencracken
- Member
- From: California
- Registered: 2010-04-17
- Posts: 23
Re: [Solved]Headphone Output Greyed Out
Well, don't I feel stupid. It wasn't connected correctly on the motherboard.
PCM still doesn't adjust the volume however. So just set mpd to use master, no biggie.
Still can't get SPDIF working, but I don't really care.
Last edited by airencracken (2010-12-03 07:22:10)
Offline
Pages: 1