You are not logged in.
Pages: 1
So I am trying to set the default sound output via 'gstreamer-properties'
I set it to my USB Device and can hear sound through test. I close the applet and then everything still loads to my computer speakers not my usb headphones. What can I do to fix this? I recently switch from pulseaudio because I couldn't use two sound requiring apps at once
Offline
gstreamer isn't the right place. See FAQ.
Offline
Funny, I just updated this today:
https://wiki.archlinux.org/index.php/Al … sound_card
My Arch Linux Stuff • Forum Etiquette • Community Ethos - Arch is not for everyone
Offline
I swear I have done both of those.
This is my /etc/asound.conf
pcm.!default {
type hw
card 1
device 0
}
[ron@myhost ~]$ cat /proc/asound/cards
0 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0xf9ff4000 irq 16
1 [default ]: USB-Audio - C-Media USB Audio Device
C-Media USB Audio Device at usb-0000:00:13.0-2, full speed
[ron@myhost ~]$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 046d:c01b Logitech, Inc. MX310 Optical Mouse
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 006: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 005 Device 007: ID 0d8c:0008 C-Media Electronics, Inc.
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
It still defaults through the computer speakers.
Offline
Pages: 1