You are not logged in.
- Topics: Active | Unanswered
#1 2010-12-15 21:45:50
- markoer
- Member
- Registered: 2010-12-15
- Posts: 57
[Solved]uvesafb and nvidia randomly crash
My issue happens randomly, it is releated to boot process,
sometimes when i boot up my notebook uvesafb and nvidia drivers are not initalized so GDM or X cant be started at all, so i must reboot my notebook once more and pray that kernel readings will not stop on this line
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
pci 0000:00:1a.7: reg 10: [mem 0xf8404800-0xf8404bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xf8400000-0xf8403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f]
pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f]
pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f]
pci 0000:00:1d.7: reg 10: [mem 0xf8404c00-0xf8404fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 1640 (mask 007f)
If kernel reading stops on lines above he is unable to get uvesafb and nvidia drivers to work, which leads to errors inserting modules from X
FATAL: Error inserting nvidia (/lib/modules/2.6.36-ARCH/kernel/drivers/video/nvidia.ko): No such device
but when i change drivers to vesa in xorg i am able to start X but only in low graphic mode.
here is the list of my pci devices , as you can see, nvidia device is recognized succesfuly, but is refusing to comunicate with kernel. If i tray to manualy load nvidia drivers or forcing it to load i also recive this error above.
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation G84 [GeForce 8600M GT] (rev a1)
04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)
0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
0e:06.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
0e:06.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
0e:06.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
when doing lsmod, nvidia isn't there of corse, here is lsmod
Module Size Used by
ext3 110866 1
jbd 39278 1 ext3
joydev 7631 0
zd1211rw 39210 0
usbhid 32137 0
hid 60496 1 usbhid
uvcvideo 54705 0
videodev 56947 1 uvcvideo
v4l1_compat 13530 2 uvcvideo,videodev
arc4 1070 4
ecb 1589 4
cpufreq_ondemand 7067 0
snd_seq_dummy 1079 0
cpufreq_powersave 658 0
snd_hda_codec_si3054 3106 1
snd_seq_oss 25040 0
snd_seq_midi_event 4496 1 snd_seq_oss
snd_seq 41688 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_hda_codec_realtek 199191 1
snd_seq_device 4369 3 snd_seq_dummy,snd_seq_oss,snd_seq
iwl3945 128515 0
snd_pcm_oss 33694 0
snd_mixer_oss 14654 1 snd_pcm_oss
acpi_cpufreq 5061 1
iwlcore 94710 1 iwl3945
snd_hda_intel 19180 0
mac80211 174591 3 zd1211rw,iwl3945,iwlcore
freq_table 1999 2 cpufreq_ondemand,acpi_cpufreq
snd_hda_codec 69419 3 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4764 1 snd_hda_codec
cfg80211 123270 4 zd1211rw,iwl3945,iwlcore,mac80211
tg3 112513 0
mperf 979 1 acpi_cpufreq
uhci_hcd 19059 0
snd_pcm 59168 4 snd_hda_codec_si3054,snd_pcm_oss,snd_hda_intel,snd_hda_codec
sdhci_pci 5492 0
sdhci 14469 1 sdhci_pci
snd_timer 15455 2 snd_seq,snd_pcm
libphy 14607 1 tg3
video 15857 0
ehci_hcd 32908 0
firewire_ohci 23516 0
coretemp 4313 0
battery 8007 0
snd 43283 12 snd_hda_codec_si3054,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_codec_realtek,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 4929 1 snd
mmc_core 52813 1 sdhci
sg 20996 0
pcspkr 1359 0
compal_laptop 8207 0
i2c_i801 6946 0
ac 2329 0
output 1416 1 video
wmi 7015 0
led_class 1811 1 sdhci
firewire_core 42849 1 firewire_ohci
crc_itu_t 1053 1 firewire_core
iTCO_wdt 8677 0
iTCO_vendor_support 1433 1 iTCO_wdt
i2c_core 15634 2 videodev,i2c_i801
thermal 9690 0
processor 22776 3 acpi_cpufreq
button 3746 0
psmouse 49765 0
serio_raw 3566 0
intel_agp 24011 0
usbcore 115834 6 zd1211rw,usbhid,uvcvideo,uhci_hcd,ehci_hcd
evdev 6660 0
rfkill 12854 2 cfg80211,compal_laptop
shpchp 23005 0
snd_page_alloc 5981 2 snd_hda_intel,snd_pcm
pci_hotplug 21555 1 shpchp
agpgart 22816 1 intel_agp
fuse 56560 3
ext4 288101 2
mbcache 4298 2 ext3,ext4
jbd2 58372 1 ext4
crc16 1053 1 ext4
uvesafb 19998 0
cn 4239 1 uvesafb
sr_mod 13217 0
sd_mod 24384 6
cdrom 31410 1 sr_mod
ata_piix 17935 0
ahci 17589 5
libahci 15598 1 ahci
libata 140500 3 ata_piix,ahci,libahci
scsi_mod 106987 4 sg,sr_mod,sd_mod,libata i relay do not catch this. maybe GPU is is allready used by process or memory is allready somehow alocated to any none process. Dont realy know..
one more thing if I append nolapic and noapm i am able to pass this and i am able to enter X,. I traied with nolapic noapm parameter more than 10 times and always is successful. but with nolapic my dual core CPU becomes one core, i also traied with acpi=off noagp pci=nobios but no luck, always randomly crash
nvidia drivers are from repositores and thy are latest, also v86d is latest
nvidia 260.19.29-1
nvidia-utils 260.19.29-1
i was traying to disable uvesafb but always same thigs happens, i am using kernel
2.6.36-ARCH
but in earlier kernel 2.6.34-ARCH same error is provided..I will tray ubuntu kernel with theri pathces but version 2.6.32 and post results here, becuose every new kernel from 2.32 failing to start nvidia properly.
same things happens if i inastall eralier version of nvidia from repos
I made all logs of successful and failed scenarios, if they will help i will post them.
EDIT:
i also trayed lts kernel, ubuntu and ice with gentoo patches but same issue accours (system freeze for 5 sec then dormaly boot, but with no luck of inerting nvidia modules [no souch device]), i am wondering right now, this isn't releated to kernel it cant be, it must be something with module which taken resoureces of nvidia device before it ment to do, maybe i need to blaclist some modules, but dont know which one.
Last edited by markoer (2011-01-22 17:57:13)
Offline
#2 2010-12-16 21:58:49
- G_Master
- Member
- Registered: 2010-12-12
- Posts: 5
Re: [Solved]uvesafb and nvidia randomly crash
Haven't done this very much, so bear with me.
Did you add the v86d hook to /etc/mkinitcpio.conf? Did you recreate initcpio using 'mkinitcpio -p kernel26'
Does your monitor support the resolution listed in /etc/modprobe.d/uvesafb.conf?
Do you have an xorg.conf file? If so, it's best that you remove it and use xorg.conf.d
Does 20-nvidia.conf exist?
I do believe uvesafb is blacklisted in /etc/modprobe.d/framebuffer_blacklist.conf, and needs to be commented out, but only one should be commented, I believe it's to avoid conflicts.
*Phew* Hopefully some of that will be useful
EDIT: If all else fails, try 'depmod -a' and reboot
Last edited by G_Master (2010-12-16 22:03:03)
Offline
#3 2010-12-17 12:09:16
- markoer
- Member
- Registered: 2010-12-15
- Posts: 57
Re: [Solved]uvesafb and nvidia randomly crash
thax for your help G_Master I allready tray your steps earlier but i did not inculde them into my post earlier. I have spent some years with linux so yoursteps are allredy trayed, but this is first time I use Arch.
Did you add the v86d hook to /etc/mkinitcpio.conf?
V86d is addaed to hook arrry and i Dont have any issue with them, I told that this things happend randomly, because if kernel don't frozze system for 5-10sec he is able to probe device and he succesfully insert moduls, so my GPU modules like nvidia and uvesafb work in succesfull scenario.
Did you recreate initcpio using 'mkinitcpio -p kernel26
yes i usualy uuse that, when compiling kernel, or addinig som stuff to hoook array, right now is not needed i think, but here it is
HOOKS="base udev v86d scsi sata filesystems keymap"
Does your monitor support the resolution listed in /etc/modprobe.d/uvesafb.conf?
monitor is set to native HD resolution, 1680x1050 here is mine vbe_modes, avalible resolutions, and uvesafb.conf
640x400-8, 0x0100
640x480-8, 0x0101
800x600-8, 0x0103
1024x768-8, 0x0105
1280x1024-8, 0x0107
320x200-16, 0x010e
320x200-32, 0x010f
640x480-16, 0x0111
640x480-32, 0x0112
800x600-16, 0x0114
800x600-32, 0x0115
1024x768-16, 0x0117
1024x768-32, 0x0118
1280x1024-16, 0x011a
1280x1024-32, 0x011b
320x200-8, 0x0130
320x400-8, 0x0131
320x400-16, 0x0132
320x400-32, 0x0133
320x240-8, 0x0134
320x240-16, 0x0135
320x240-32, 0x0136
640x400-16, 0x013d
640x400-32, 0x013e
1280x800-8, 0x0160
1280x800-32, 0x0161
768x480-8, 0x0162
1680x1050-8, 0x0168
1680x1050-32, 0x0169#
# This file sets the parameters for uvesafb module.
# The following format should be used:
# options uvesafb mode=<xres>x<yres>[-<bpp>][@<refresh>] scroll=<ywrap|ypan|redraw> ...
#
# For more details see:
# [url]http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob;f=Documentation/fb/uvesafb.txt[/url]
#
options uvesafb mode_option=1680x1050-32 scroll=ywrapas you can see all is setup correctly
[Do you have an xorg.conf file? If so, it's best that you remove it and use xorg.conf.d
Does 20-nvidia.conf exist?]
yes 20-nvidia.conf exist and i use xorg.conf i can tray them but my issue isnt releated to post boot scripts, X is started after all daemons are located and eecuted [fail/done], so this si sufficent to tray.
it must be something with eary boot process, I must admint that i dont know where to search anymore, i trayed ubuntu lucid vidth nvidia drivers offical and v86d, as i can see computer with ubuntu kernel 2.6.32.25 start normaly all the time, without any hangs on preboot.
here is my dmesg from unucessful startup
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 20101125 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Dec 10 20:01:53 UTC 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable)
BIOS-e820: 00000000bfed0000 - 00000000bfee3000 (ACPI NVS)
BIOS-e820: 00000000bfee3000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
DMI present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0xbfed0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BFF00000 mask FFFF00000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000001000 (reserved)
modified: 0000000000001000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009f800 (usable)
modified: 000000000009f800 - 00000000000a0000 (reserved)
modified: 00000000000dc000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bfed0000 (usable)
modified: 00000000bfed0000 - 00000000bfee3000 (ACPI NVS)
modified: 00000000bfee3000 - 00000000c0000000 (reserved)
modified: 00000000fec00000 - 00000000fec10000 (reserved)
modified: 00000000fed00000 - 00000000fed00400 (reserved)
modified: 00000000fed14000 - 00000000fed1a000 (reserved)
modified: 00000000fed1c000 - 00000000fed90000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ff000000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
found SMP MP-table at [c00f7bc0] f7bc0
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 15000-1a000
RAMDISK: 7fe33000 - 7fff0000
Allocated new RAMDISK: 00100000 - 002bcb95
Move RAMDISK from 000000007fe33000 - 000000007ffefb94 to 00100000 - 002bcb94
ACPI: RSDP 000f7b40 00024 (v02 Compal)
ACPI: XSDT bfed86a6 0008C (v01 Compal CRESTLNE 06040000 LTP 00000000)
ACPI: FACP bfedfbd2 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
ACPI: DSDT bfed9b51 0600D (v02 Compal CRESTLNE 06040000 INTL 20061109)
ACPI: FACS bfee2fc0 00040
ACPI: APIC bfedfcc6 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: HPET bfedfd2e 00038 (v01 Compal CRESTLNE 06040000 LOHR 0000005A)
ACPI: MCFG bfedfd66 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: TCPA bfedfda2 00032 (v01 Intel CRESTLNE 06040000 LOHR 0000005A)
ACPI: TMOR bfedfdd4 00026 (v01 PTLTD 06040000 PTL 00000003)
ACPI: SLIC bfedfdfa 00176 (v01 Compal CRESTLNE 06040000 TBD 00000001)
ACPI: APIC bfedff70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT bfedffd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SSDT bfed988c 002C5 (v01 SataRe SataAhci 00001000 INTL 20050624)
ACPI: SSDT bfed8cbe 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT bfed8c18 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
ACPI: SSDT bfed8732 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
ACPI: Local APIC address 0xfee00000
2182MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x000bfed0
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x00000002
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bfed0
On node 0 totalpages: 786016
free_area_init_node: node 0, pgdat c142d600, node_mem_map c1598020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3952 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 4366 pages used for memmap
HighMem zone: 554436 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [16000 - 167ff]
PM: Registered nosave memory: 0000000000002000 - 0000000000010000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 13 pages/cpu @c3000000 s31488 r0 d21760 u2097152
pcpu-alloc: s31488 r0 d21760 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779874
Kernel command line: root=/dev/sda7 ro noapictimer noagp panic=5
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 15722540 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Subtract (52 early reservations)
#1 [0000001000 - 0000002000] EX TRAMPOLINE
#2 [0001000000 - 000158fe8c] TEXT DATA BSS
#3 [0001590000 - 0001596194] BRK
#4 [00000f7bd0 - 0000100000] BIOS reserved
#5 [00000f7bc0 - 00000f7bd0] MP-table mpf
#6 [000009f800 - 000009fd71] BIOS reserved
#7 [000009ff2d - 00000f7bc0] BIOS reserved
#8 [000009fd71 - 000009ff2d] MP-table mpc
#9 [0000010000 - 0000011000] TRAMPOLINE
#10 [0000011000 - 0000015000] ACPI WAKEUP
#11 [0000015000 - 0000016000] PGTABLE
#12 [0000100000 - 00002bd000] NEW RAMDISK
#13 [0001597000 - 0001598000] BOOTMEM
#14 [0001598000 - 0002d98000] BOOTMEM
#15 [000158fec0 - 000158fec4] BOOTMEM
#16 [000158ff00 - 000158ffc0] BOOTMEM
#17 [00015961c0 - 0001596214] BOOTMEM
#18 [0002d98000 - 0002d9b000] BOOTMEM
#19 [0001596240 - 0001596310] BOOTMEM
#20 [0002d9b000 - 0002da7000] BOOTMEM
#21 [000158ffc0 - 000158ffe5] BOOTMEM
#22 [0001596340 - 0001596367] BOOTMEM
#23 [0001596380 - 0001596524] BOOTMEM
#24 [0001596540 - 0001596580] BOOTMEM
#25 [0001596580 - 00015965c0] BOOTMEM
#26 [00015965c0 - 0001596600] BOOTMEM
#27 [0001596600 - 0001596640] BOOTMEM
#28 [0001596640 - 0001596680] BOOTMEM
#29 [0001596680 - 00015966c0] BOOTMEM
#30 [00015966c0 - 0001596700] BOOTMEM
#31 [0001596700 - 0001596740] BOOTMEM
#32 [0001596740 - 0001596780] BOOTMEM
#33 [0001596780 - 00015967c0] BOOTMEM
#34 [00015967c0 - 0001596800] BOOTMEM
#35 [0001596800 - 0001596840] BOOTMEM
#36 [0001596840 - 0001596850] BOOTMEM
#37 [0001596880 - 0001596890] BOOTMEM
#38 [00015968c0 - 00015968ec] BOOTMEM
#39 [0001596900 - 000159692c] BOOTMEM
#40 [0003000000 - 000300d000] BOOTMEM
#41 [0003200000 - 000320d000] BOOTMEM
#42 [0001596940 - 0001596944] BOOTMEM
#43 [0001596980 - 0001596984] BOOTMEM
#44 [00015969c0 - 00015969c8] BOOTMEM
#45 [0001596a00 - 0001596a08] BOOTMEM
#46 [0001596a40 - 0001596ae8] BOOTMEM
#47 [0001596b00 - 0001596b68] BOOTMEM
#48 [0002da7000 - 0002dab000] BOOTMEM
#49 [0002dab000 - 0002e2b000] BOOTMEM
#50 [0002e2b000 - 0002e6b000] BOOTMEM
#51 [000320d000 - 000410b82c] BOOTMEM
Initializing HighMem for node 0 (000377fe:000bfed0)
Memory: 3095648k/3144512k available (3104k kernel code, 48416k reserved, 1205k data, 428k init, 2235208k highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1436000 - 0xc14a1000 ( 428 kB)
.data : 0xc1308056 - 0xc1435820 (1205 kB)
.text : 0xc1000000 - 0xc1308056 (3104 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:512
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1795.473 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3592.56 BogoMIPS (lpj=5984910)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20100702
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
Disabling APIC timer
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 Ok.
Initializing CPU#1
CPU1: Thermal monitoring handled by SMI
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (7184.25 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: PCI BIOS revision 2.10 entry at 0xfdde1, last bus=14
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT bfed958c 00238 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00238 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT bfed8f1d 005EA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 005EA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT bfed97c4 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: SSDT bfed9507 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
pci 0000:00:1a.7: reg 10: [mem 0xf8404800-0xf8404bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xf8400000-0xf8403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f]
pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f]
pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f]
pci 0000:00:1d.7: reg 10: [mem 0xf8404c00-0xf8404fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 1640 (mask 007f)
pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io 0x18a0-0x18af]
pci 0000:00:1f.2: reg 10: [io 0x18d8-0x18df]
pci 0000:00:1f.2: reg 14: [io 0x18cc-0x18cf]
pci 0000:00:1f.2: reg 18: [io 0x18d0-0x18d7]
pci 0000:00:1f.2: reg 1c: [io 0x18c8-0x18cb]
pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
pci 0000:00:1f.2: reg 24: [mem 0xf8404000-0xf84047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
pci 0000:01:00.0: reg 10: [mem 0xc6000000-0xc6ffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xc4000000-0xc5ffffff 64bit]
pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xc4000000-0xc6ffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xbc000000-0xbfffffff]
pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
pci 0000:04:00.0: reg 10: [mem 0xf0000000-0xf000ffff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 04-04]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff]
pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 06-06]
pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 08-08]
pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.3: bridge window [mem 0xb4000000-0xb7ffffff]
pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0c:00.0: reg 10: [mem 0xf8000000-0xf8000fff]
pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.0: PME# disabled
pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.5: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0e:06.0: reg 10: [mem 0xf8100000-0xf81007ff]
pci 0000:0e:06.0: supports D1 D2
pci 0000:0e:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0e:06.0: PME# disabled
pci 0000:0e:06.1: reg 10: [mem 0xf8100800-0xf81008ff]
pci 0000:0e:06.1: supports D1 D2
pci 0000:0e:06.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0e:06.1: PME# disabled
pci 0000:0e:06.2: reg 10: [mem 0xf8100c00-0xf8100cff]
pci 0000:0e:06.2: supports D1 D2
pci 0000:0e:06.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0e:06.2: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:1c.0: no compatible bridge window for [mem 0xbc000000-0xbfffffff]
pci 0000:00:1c.3: no compatible bridge window for [mem 0xb4000000-0xb7ffffff]
reserve RAM buffer: 0000000000002000 - 000000000000ffff
reserve RAM buffer: 000000000009f800 - 000000000009ffff
reserve RAM buffer: 00000000bfed0000 - 00000000bfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:06: [io 0x0680-0x069f] has been reserved
system 00:06: [io 0x0800-0x080f] has been reserved
system 00:06: [io 0x1000-0x107f] has been reserved
system 00:06: [io 0x1180-0x11bf] has been reserved
system 00:06: [io 0x1640-0x164f] has been reserved
system 00:06: [io 0xfe00] has been reserved
system 00:06: [io 0xff00-0xff7f] has been reserved
pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
pci 0000:00:1c.3: BAR 14: assigned [mem 0xc0400000-0xc07fffff]
pci 0000:00:1c.4: BAR 14: assigned [mem 0xc0800000-0xc09fffff]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0a00000-0xc0bfffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0c00000-0xc0dfffff 64bit pref]
pci 0000:00:1c.4: BAR 13: assigned [io 0x7000-0x7fff]
pci 0000:00:1c.5: BAR 13: assigned [io 0x8000-0x8fff]
pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0e00000-0xc0e000ff]
pci 0000:00:1f.3: BAR 0: set to [mem 0xc0e00000-0xc0e000ff] (PCI address [0xc0e00000-0xc0e000ff]
pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xc4000000-0xc6ffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 04-04]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff]
pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 06-06]
pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 08-08]
pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc07fffff]
pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.4: bridge window [mem 0xc0800000-0xc09fffff]
pci 0000:00:1c.4: bridge window [mem 0xc0a00000-0xc0bfffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.5: bridge window [io 0x8000-0x8fff]
pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
pci 0000:00:1c.5: bridge window [mem 0xc0c00000-0xc0dfffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0e-0e]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xc4000000-0xc6ffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc03fffff]
pci_bus 0000:02: resource 2 [mem 0xcc000000-0xcdffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf3ffffff]
pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfbffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:06: resource 1 [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:06: resource 2 [mem 0xfc000000-0xfdffffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:08: resource 1 [mem 0xc0400000-0xc07fffff]
pci_bus 0000:08: resource 2 [mem 0xc8000000-0xc9ffffff 64bit pref]
pci_bus 0000:0a: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:0a: resource 1 [mem 0xc0800000-0xc09fffff]
pci_bus 0000:0a: resource 2 [mem 0xc0a00000-0xc0bfffff 64bit pref]
pci_bus 0000:0c: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:0c: resource 1 [mem 0xf8000000-0xf80fffff]
pci_bus 0000:0c: resource 2 [mem 0xc0c00000-0xc0dfffff 64bit pref]
pci_bus 0000:0e: resource 1 [mem 0xf8100000-0xf81fffff]
pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0e: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:0e: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:0e: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:0e: resource 10 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:0e: resource 11 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1780k freed
Simple Boot Flag at 0x38 set to 0x1
apm: BIOS not found.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1292443892.426:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1684
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
intel_idle: MWAIT substates: 0x22220
intel_idle: does not run on family 6 model 15
ERST: Table is not found!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:07: setting system clock to 2010-12-15 20:11:33 UTC (1292443893)
Initalizing network drop monitor service
Freeing unused kernel memory: 428k freed
udev[38]: starting version 164
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Clockevents: could not switch to one-shot mode:
Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 0
lapic is not functional.
Could not switch to high resolution mode on CPU 1
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404180 irq 40
ata3: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404200 irq 40
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
ata4.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, TI03, max UDMA/33
ata4.00: configured for UDMA/33
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: unexpected _GTF length (8)
ata1.00: ATA-7: TOSHIBA MK1237GSX, DL130G, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: unexpected _GTF length (8)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1237GS DL13 PQ: 0 ANSI: 5
scsi 3:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632D TI03 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
v86d[800]: segfault at 0 ip 080490e1 sp bf96c8a0 error 4 in v86d[8048000+17000]
uvesafb: Getting VBE info block failed (eax=0x4f00, err=1)
uvesafb: vbe_init() failed with -22
uvesafb: probe of uvesafb.0 failed with error -22
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
udev[842]: starting version 164
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
fuse init (API version 7.15)
Linux agpgart interface v0.103
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: WMI: Mapper loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
usbcore: registered new device driver usb
input: PC Speaker as /devices/platform/pcspkr/input/input4
compal-laptop: Identified laptop model 'FL90/IFL90'
Monitor-Mwait will be used to enter C-1 state
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
compal-laptop: Driver 0.2.7 successfully loaded
Monitor-Mwait will be used to enter C-2 state
ACPI: AC Adapter [ACAD] (on-line)
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
Clockevents: could not switch to one-shot mode: lapic is not functional.
Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 1
Could not switch to high resolution mode on CPU 0
coretemp coretemp.0: TjMax is assumed as 100 C!
coretemp coretemp.1: TjMax is assumed as 100 C!
firewire_ohci 0000:0e:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8404800
ACPI: Battery Slot [BAT1] (battery present)
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8404c00
acpi device:03: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
firewire_ohci: Added fw-ohci device 0000:0e:06.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
sdhci-pci 0000:0e:06.1: SDHCI controller found [1180:0822] (rev 22)
sdhci-pci 0000:0e:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
sdhci-pci 0000:0e:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:0e:06.1] using DMA
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
tg3.c:v3.113 (August 2, 2010)
tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:04:00.0: setting latency timer to 64
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
cfg80211: Calling CRDA to update world regulatory domain
tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
iwl3945: Copyright(c) 2003-2010 Intel Corporation
iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:0c:00.0: setting latency timer to 64
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
usb 1-2: new high speed USB device using ehci_hcd and address 2
tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
tg3 0000:04:00.0: eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:16:d4:dc:bc:a8
tg3 0000:04:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
psmouse serio1: ID: 10 00 64
iwl3945 0000:0c:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:0c:00.0: irq 42 for MSI/MSI-X
phy0: Selected rate control algorithm 'iwl-3945-rs'
firewire_core: created device fw0: GUID 00023f75b2400f2e, S400
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b018)
input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
elantech: assuming hardware version 1, firmware version 2.0.4
usb 2-1: new high speed USB device using ehci_hcd and address 2
elantech: Synaptics capabilities query result 0x10, 0x02, 0x64.
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
usb 2-1.3: new low speed USB device using ehci_hcd and address 3
usbcore: registered new interface driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.3/2-1.3:1.0/input/input8
generic-usb 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-1.3/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 2-1.4: new high speed USB device using ehci_hcd and address 4
usb 2-1.4: reset high speed USB device using ehci_hcd and address 4
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9
phy1: Selected rate control algorithm 'minstrel_ht'
zd1211rw 2-1.4:1.0: phy1
usbcore: registered new interface driver zd1211rw
nvidia 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: enabling device (0000 -> 0003)
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0407) installed
NVRM: in this system is not supported by the 260.19.29 NVIDIA Linux
NVRM: graphics driver release. Please see 'Appendix A -
NVRM: Supported NVIDIA GPU Products' in this release's README,
NVRM: available on the Linux graphics driver download page at
NVRM: [url=http://www.nvidia.com]www.nvidia.com[/url].
nvidia: probe of 0000:01:00.0 failed with error -1
NVRM: The NVIDIA probe routine failed for 1 device(s).
NVRM: None of the NVIDIA graphics adapters were initialized!
EXT4-fs (sda7): re-mounted. Opts: (null)
EXT4-fs (sda7): re-mounted. Opts: (null)
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with writeback data mode
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
Adding 247976k swap on /dev/sda6. Priority:-1 extents:1 across:247976k
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=io+mem
NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0407) installed
NVRM: in this system is not supported by the 260.19.29 NVIDIA Linux
NVRM: graphics driver release. Please see 'Appendix A -
NVRM: Supported NVIDIA GPU Products' in this release's README,
NVRM: available on the Linux graphics driver download page at
NVRM: [url=http://www.nvidia.com]www.nvidia.com[/url].
nvidia: probe of 0000:01:00.0 failed with error -1
NVRM: The NVIDIA probe routine failed for 1 device(s).
NVRM: None of the NVIDIA graphics adapters were initialized!
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=io+mem
NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0407) installed
NVRM: in this system is not supported by the 260.19.29 NVIDIA Linux
NVRM: graphics driver release. Please see 'Appendix A -
NVRM: Supported NVIDIA GPU Products' in this release's README,
NVRM: available on the Linux graphics driver download page at
NVRM: [url=http://www.nvidia.com]www.nvidia.com[/url].
nvidia: probe of 0000:01:00.0 failed with error -1
NVRM: The NVIDIA probe routine failed for 1 device(s).
NVRM: None of the NVIDIA graphics adapters were initialized!
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=io+mem
NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0407) installed
NVRM: in this system is not supported by the 260.19.29 NVIDIA Linux
NVRM: graphics driver release. Please see 'Appendix A -
NVRM: Supported NVIDIA GPU Products' in this release's README,
NVRM: available on the Linux graphics driver download page at
NVRM: [url=http://www.nvidia.com]www.nvidia.com[/url].
nvidia: probe of 0000:01:00.0 failed with error -1
NVRM: The NVIDIA probe routine failed for 1 device(s).
NVRM: None of the NVIDIA graphics adapters were initialized!
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=io+mem
NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0407) installed
NVRM: in this system is not supported by the 260.19.29 NVIDIA Linux
NVRM: graphics driver release. Please see 'Appendix A -
NVRM: Supported NVIDIA GPU Products' in this release's README,
NVRM: available on the Linux graphics driver download page at
NVRM: [url=http://www.nvidia.com]www.nvidia.com[/url].
nvidia: probe of 0000:01:00.0 failed with error -1
NVRM: The NVIDIA probe routine failed for 1 device(s).
NVRM: None of the NVIDIA graphics adapters were initialized!
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=io+mem
NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0407) installed
NVRM: in this system is not supported by the 260.19.29 NVIDIA Linux
NVRM: graphics driver release. Please see 'Appendix A -
NVRM: Supported NVIDIA GPU Products' in this release's README,
NVRM: available on the Linux graphics driver download page at
NVRM: [url=http://www.nvidia.com]www.nvidia.com[/url].
nvidia: probe of 0000:01:00.0 failed with error -1
NVRM: The NVIDIA probe routine failed for 1 device(s).
NVRM: None of the NVIDIA graphics adapters were initialized!
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=io+mem
NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0407) installed
NVRM: in this system is not supported by the 260.19.29 NVIDIA Linux
NVRM: graphics driver release. Please see 'Appendix A -
NVRM: Supported NVIDIA GPU Products' in this release's README,
NVRM: available on the Linux graphics driver download page at
NVRM: [url=http://www.nvidia.com]www.nvidia.com[/url].
nvidia: probe of 0000:01:00.0 failed with error -1
NVRM: The NVIDIA probe routine failed for 1 device(s).
NVRM: None of the NVIDIA graphics adapters were initialized!
zd1211rw 2-1.4:1.0: firmware version 4725
zd1211rw 2-1.4:1.0: zd1211b chip 0cde:001a v4810 high 00-60-b3 AL2230_RF pa0 g--NS
cfg80211: Calling CRDA for country: DE here is also dmesg from succesfull intialied modules into kernel
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 20101125 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Dec 10 20:01:53 UTC 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable)
BIOS-e820: 00000000bfed0000 - 00000000bfee3000 (ACPI NVS)
BIOS-e820: 00000000bfee3000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
DMI present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0xbfed0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BFF00000 mask FFFF00000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000001000 (reserved)
modified: 0000000000001000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009f800 (usable)
modified: 000000000009f800 - 00000000000a0000 (reserved)
modified: 00000000000dc000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bfed0000 (usable)
modified: 00000000bfed0000 - 00000000bfee3000 (ACPI NVS)
modified: 00000000bfee3000 - 00000000c0000000 (reserved)
modified: 00000000fec00000 - 00000000fec10000 (reserved)
modified: 00000000fed00000 - 00000000fed00400 (reserved)
modified: 00000000fed14000 - 00000000fed1a000 (reserved)
modified: 00000000fed1c000 - 00000000fed90000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ff000000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
found SMP MP-table at [c00f7bc0] f7bc0
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 15000-1a000
RAMDISK: 7fe33000 - 7fff0000
Allocated new RAMDISK: 00100000 - 002bcb95
Move RAMDISK from 000000007fe33000 - 000000007ffefb94 to 00100000 - 002bcb94
ACPI: RSDP 000f7b40 00024 (v02 Compal)
ACPI: XSDT bfed86a6 0008C (v01 Compal CRESTLNE 06040000 LTP 00000000)
ACPI: FACP bfedfbd2 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
ACPI: DSDT bfed9b51 0600D (v02 Compal CRESTLNE 06040000 INTL 20061109)
ACPI: FACS bfee2fc0 00040
ACPI: APIC bfedfcc6 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: HPET bfedfd2e 00038 (v01 Compal CRESTLNE 06040000 LOHR 0000005A)
ACPI: MCFG bfedfd66 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: TCPA bfedfda2 00032 (v01 Intel CRESTLNE 06040000 LOHR 0000005A)
ACPI: TMOR bfedfdd4 00026 (v01 PTLTD 06040000 PTL 00000003)
ACPI: SLIC bfedfdfa 00176 (v01 Compal CRESTLNE 06040000 TBD 00000001)
ACPI: APIC bfedff70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT bfedffd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SSDT bfed988c 002C5 (v01 SataRe SataAhci 00001000 INTL 20050624)
ACPI: SSDT bfed8cbe 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT bfed8c18 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
ACPI: SSDT bfed8732 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
ACPI: Local APIC address 0xfee00000
2182MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x000bfed0
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x00000002
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bfed0
On node 0 totalpages: 786016
free_area_init_node: node 0, pgdat c142d600, node_mem_map c1598020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3952 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 4366 pages used for memmap
HighMem zone: 554436 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [16000 - 167ff]
PM: Registered nosave memory: 0000000000002000 - 0000000000010000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 13 pages/cpu @c3000000 s31488 r0 d21760 u2097152
pcpu-alloc: s31488 r0 d21760 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779874
Kernel command line: root=/dev/sda7 ro panic=5
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 15722540 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Subtract (52 early reservations)
#1 [0000001000 - 0000002000] EX TRAMPOLINE
#2 [0001000000 - 000158fe8c] TEXT DATA BSS
#3 [0001590000 - 0001596194] BRK
#4 [00000f7bd0 - 0000100000] BIOS reserved
#5 [00000f7bc0 - 00000f7bd0] MP-table mpf
#6 [000009f800 - 000009fd71] BIOS reserved
#7 [000009ff2d - 00000f7bc0] BIOS reserved
#8 [000009fd71 - 000009ff2d] MP-table mpc
#9 [0000010000 - 0000011000] TRAMPOLINE
#10 [0000011000 - 0000015000] ACPI WAKEUP
#11 [0000015000 - 0000016000] PGTABLE
#12 [0000100000 - 00002bd000] NEW RAMDISK
#13 [0001597000 - 0001598000] BOOTMEM
#14 [0001598000 - 0002d98000] BOOTMEM
#15 [000158fec0 - 000158fec4] BOOTMEM
#16 [000158ff00 - 000158ffc0] BOOTMEM
#17 [00015961c0 - 0001596214] BOOTMEM
#18 [0002d98000 - 0002d9b000] BOOTMEM
#19 [0001596240 - 0001596310] BOOTMEM
#20 [0002d9b000 - 0002da7000] BOOTMEM
#21 [000158ffc0 - 000158ffe5] BOOTMEM
#22 [0001596340 - 0001596367] BOOTMEM
#23 [0001596380 - 0001596524] BOOTMEM
#24 [0001596540 - 0001596580] BOOTMEM
#25 [0001596580 - 00015965c0] BOOTMEM
#26 [00015965c0 - 0001596600] BOOTMEM
#27 [0001596600 - 0001596640] BOOTMEM
#28 [0001596640 - 0001596680] BOOTMEM
#29 [0001596680 - 00015966c0] BOOTMEM
#30 [00015966c0 - 0001596700] BOOTMEM
#31 [0001596700 - 0001596740] BOOTMEM
#32 [0001596740 - 0001596780] BOOTMEM
#33 [0001596780 - 00015967c0] BOOTMEM
#34 [00015967c0 - 0001596800] BOOTMEM
#35 [0001596800 - 0001596840] BOOTMEM
#36 [0001596840 - 0001596850] BOOTMEM
#37 [0001596880 - 0001596890] BOOTMEM
#38 [00015968c0 - 00015968da] BOOTMEM
#39 [0001596900 - 000159691a] BOOTMEM
#40 [0003000000 - 000300d000] BOOTMEM
#41 [0003200000 - 000320d000] BOOTMEM
#42 [0001596940 - 0001596944] BOOTMEM
#43 [0001596980 - 0001596984] BOOTMEM
#44 [00015969c0 - 00015969c8] BOOTMEM
#45 [0001596a00 - 0001596a08] BOOTMEM
#46 [0001596a40 - 0001596ae8] BOOTMEM
#47 [0001596b00 - 0001596b68] BOOTMEM
#48 [0002da7000 - 0002dab000] BOOTMEM
#49 [0002dab000 - 0002e2b000] BOOTMEM
#50 [0002e2b000 - 0002e6b000] BOOTMEM
#51 [000320d000 - 000410b82c] BOOTMEM
Initializing HighMem for node 0 (000377fe:000bfed0)
Memory: 3095648k/3144512k available (3104k kernel code, 48416k reserved, 1205k data, 428k init, 2235208k highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1436000 - 0xc14a1000 ( 428 kB)
.data : 0xc1308056 - 0xc1435820 (1205 kB)
.text : 0xc1000000 - 0xc1308056 (3104 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:512
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1795.554 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3592.73 BogoMIPS (lpj=5985180)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20100702
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 Ok.
Initializing CPU#1
CPU1: Thermal monitoring handled by SMI
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (7184.36 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: PCI BIOS revision 2.10 entry at 0xfdde1, last bus=14
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT bfed958c 00238 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00238 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT bfed8f1d 005EA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 005EA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT bfed97c4 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: SSDT bfed9507 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
pci 0000:00:1a.7: reg 10: [mem 0xf8404800-0xf8404bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xf8400000-0xf8403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f]
pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f]
pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f]
pci 0000:00:1d.7: reg 10: [mem 0xf8404c00-0xf8404fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 1640 (mask 007f)
pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io 0x18a0-0x18af]
pci 0000:00:1f.2: reg 10: [io 0x18d8-0x18df]
pci 0000:00:1f.2: reg 14: [io 0x18cc-0x18cf]
pci 0000:00:1f.2: reg 18: [io 0x18d0-0x18d7]
pci 0000:00:1f.2: reg 1c: [io 0x18c8-0x18cb]
pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
pci 0000:00:1f.2: reg 24: [mem 0xf8404000-0xf84047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
pci 0000:01:00.0: reg 10: [mem 0xc6000000-0xc6ffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xc4000000-0xc5ffffff 64bit]
pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xc4000000-0xc6ffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xbc000000-0xbfffffff]
pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
pci 0000:04:00.0: reg 10: [mem 0xf0000000-0xf000ffff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 04-04]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff]
pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 06-06]
pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 08-08]
pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.3: bridge window [mem 0xb4000000-0xb7ffffff]
pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0c:00.0: reg 10: [mem 0xf8000000-0xf8000fff]
pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.0: PME# disabled
pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.5: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0e:06.0: reg 10: [mem 0xf8100000-0xf81007ff]
pci 0000:0e:06.0: supports D1 D2
pci 0000:0e:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0e:06.0: PME# disabled
pci 0000:0e:06.1: reg 10: [mem 0xf8100800-0xf81008ff]
pci 0000:0e:06.1: supports D1 D2
pci 0000:0e:06.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0e:06.1: PME# disabled
pci 0000:0e:06.2: reg 10: [mem 0xf8100c00-0xf8100cff]
pci 0000:0e:06.2: supports D1 D2
pci 0000:0e:06.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0e:06.2: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:1c.0: no compatible bridge window for [mem 0xbc000000-0xbfffffff]
pci 0000:00:1c.3: no compatible bridge window for [mem 0xb4000000-0xb7ffffff]
reserve RAM buffer: 0000000000002000 - 000000000000ffff
reserve RAM buffer: 000000000009f800 - 000000000009ffff
reserve RAM buffer: 00000000bfed0000 - 00000000bfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:06: [io 0x0680-0x069f] has been reserved
system 00:06: [io 0x0800-0x080f] has been reserved
system 00:06: [io 0x1000-0x107f] has been reserved
system 00:06: [io 0x1180-0x11bf] has been reserved
system 00:06: [io 0x1640-0x164f] has been reserved
system 00:06: [io 0xfe00] has been reserved
system 00:06: [io 0xff00-0xff7f] has been reserved
pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
pci 0000:00:1c.3: BAR 14: assigned [mem 0xc0400000-0xc07fffff]
pci 0000:00:1c.4: BAR 14: assigned [mem 0xc0800000-0xc09fffff]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0a00000-0xc0bfffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0c00000-0xc0dfffff 64bit pref]
pci 0000:00:1c.4: BAR 13: assigned [io 0x7000-0x7fff]
pci 0000:00:1c.5: BAR 13: assigned [io 0x8000-0x8fff]
pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0e00000-0xc0e000ff]
pci 0000:00:1f.3: BAR 0: set to [mem 0xc0e00000-0xc0e000ff] (PCI address [0xc0e00000-0xc0e000ff]
pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xc4000000-0xc6ffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 04-04]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff]
pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 06-06]
pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 08-08]
pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc07fffff]
pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.4: bridge window [mem 0xc0800000-0xc09fffff]
pci 0000:00:1c.4: bridge window [mem 0xc0a00000-0xc0bfffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.5: bridge window [io 0x8000-0x8fff]
pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
pci 0000:00:1c.5: bridge window [mem 0xc0c00000-0xc0dfffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0e-0e]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xc4000000-0xc6ffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc03fffff]
pci_bus 0000:02: resource 2 [mem 0xcc000000-0xcdffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf3ffffff]
pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfbffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:06: resource 1 [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:06: resource 2 [mem 0xfc000000-0xfdffffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:08: resource 1 [mem 0xc0400000-0xc07fffff]
pci_bus 0000:08: resource 2 [mem 0xc8000000-0xc9ffffff 64bit pref]
pci_bus 0000:0a: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:0a: resource 1 [mem 0xc0800000-0xc09fffff]
pci_bus 0000:0a: resource 2 [mem 0xc0a00000-0xc0bfffff 64bit pref]
pci_bus 0000:0c: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:0c: resource 1 [mem 0xf8000000-0xf80fffff]
pci_bus 0000:0c: resource 2 [mem 0xc0c00000-0xc0dfffff 64bit pref]
pci_bus 0000:0e: resource 1 [mem 0xf8100000-0xf81fffff]
pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0e: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:0e: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:0e: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:0e: resource 10 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:0e: resource 11 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1780k freed
Simple Boot Flag at 0x38 set to 0x1
apm: BIOS not found.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1292412599.406:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1684
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
intel_idle: MWAIT substates: 0x22220
intel_idle: does not run on family 6 model 15
ERST: Table is not found!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:07: setting system clock to 2010-12-15 11:30:00 UTC (1292412600)
Initalizing network drop monitor service
Freeing unused kernel memory: 428k freed
udev[38]: starting version 164
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
ata1.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, TI03, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632D TI03 PQ: 0 ANSI: 5
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
ahci 0000:00:1f.2: setting latency timer to 64
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
ata3: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404100 irq 40
ata4: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404180 irq 40
ata5: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404200 irq 40
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: unexpected _GTF length (8)
ata3.00: ATA-7: TOSHIBA MK1237GSX, DL130G, max UDMA/100
ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: unexpected _GTF length (8)
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK1237GS DL13 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 2:0:0:0: [sda] Attached SCSI disk
uvesafb: NVIDIA Corporation, G84 Board - e416h10 , Chip Rev , OEM: NVIDIA, VBE v3.0
uvesafb: protected mode interface info at c000:b280
uvesafb: pmi: set display start = c00cb2e3, set palette = c00cb33e
uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
uvesafb: VBIOS/hardware doesn't support DDC transfers
uvesafb: no monitor limits have been set, default refresh rate will be used
uvesafb: scrolling: ywrap using protected mode interface, yres_virtual=2100
Console: switching to colour frame buffer device 210x65
uvesafb: framebuffer at 0xc5000000, mapped to 0xf8280000, using 13781k, total 14336k
fb0: VESA VGA frame buffer device
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
udev[840]: starting version 164
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /devices/platform/pcspkr/input/input1
iTCO_vendor_support: vendor-support=0
fuse init (API version 7.15)
Linux agpgart interface v0.103
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
compal-laptop: Identified laptop model 'FL90/IFL90'
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
compal-laptop: Driver 0.2.7 successfully loaded
ACPI: acpi_idle registered with cpuidle
ACPI: WMI: Mapper loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
firewire_ohci 0000:0e:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8404800
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
acpi device:03: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8404c00
ACPI: AC Adapter [ACAD] (on-line)
coretemp coretemp.0: TjMax is assumed as 100 C!
coretemp coretemp.1: TjMax is assumed as 100 C!
firewire_ohci: Added fw-ohci device 0000:0e:06.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
sdhci-pci 0000:0e:06.1: SDHCI controller found [1180:0822] (rev 22)
sdhci-pci 0000:0e:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
sdhci-pci 0000:0e:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
Registered led device: mmc0::
Switching to clocksource hpet
mmc0: SDHCI controller on PCI [0000:0e:06.1] using DMA
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ACPI: Battery Slot [BAT1] (battery present)
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
cfg80211: Calling CRDA to update world regulatory domain
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
tg3.c:v3.113 (August 2, 2010)
tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:04:00.0: setting latency timer to 64
tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
iwl3945: Copyright(c) 2003-2010 Intel Corporation
iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:0c:00.0: setting latency timer to 64
usb 1-2: new high speed USB device using ehci_hcd and address 2
tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
psmouse serio1: ID: 10 00 64
tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
tg3 0000:04:00.0: eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:16:d4:dc:bc:a8
tg3 0000:04:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
iwl3945 0000:0c:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:0c:00.0: irq 42 for MSI/MSI-X
phy0: Selected rate control algorithm 'iwl-3945-rs'
firewire_core: created device fw0: GUID 00023f75b2400f2e, S400
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b018)
input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
elantech: assuming hardware version 1, firmware version 2.0.4
usb 2-1: new high speed USB device using ehci_hcd and address 2
elantech: Synaptics capabilities query result 0x10, 0x02, 0x64.
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
usb 2-1.3: new low speed USB device using ehci_hcd and address 3
usbcore: registered new interface driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.3/2-1.3:1.0/input/input8
generic-usb 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-1.3/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 2-1.4: new high speed USB device using ehci_hcd and address 4
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9
usb 2-1.4: reset high speed USB device using ehci_hcd and address 4
nvidia 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.29 Wed Dec 8 12:09:09 PST 2010
phy1: Selected rate control algorithm 'minstrel_ht'
zd1211rw 2-1.4:1.0: phy1
usbcore: registered new interface driver zd1211rw
EXT4-fs (sda7): re-mounted. Opts: (null)
EXT4-fs (sda7): re-mounted. Opts: (null)
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with writeback data mode
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
Adding 247976k swap on /dev/sda6. Priority:-1 extents:1 across:247976klsmod is in earler post, I dont wana spam this therad 
thx for involving in this, traying to help me, any other opinion?
regards
Offline
#4 2010-12-17 15:13:25
- G_Master
- Member
- Registered: 2010-12-12
- Posts: 5
Re: [Solved]uvesafb and nvidia randomly crash
Hmm...quite the problem you seem to have there. lol
Remove the nvidia package and try the official nvidia installer, couldn't hurt.
Also, what's the brand and model number of your notebook?
Maybe you need to install the legacy version of nvidia for older cards?
EDIT: This looks kinda similar, if vesa and uvesa doesn't work.
https://bbs.archlinux.org/viewtopic.php?id=106945
EDIT AGAIN: I meant vesafb and uvesafb T_T
Last edited by G_Master (2010-12-17 18:41:02)
Offline
#5 2010-12-17 21:34:01
- markoer
- Member
- Registered: 2010-12-15
- Posts: 57
Re: [Solved]uvesafb and nvidia randomly crash
my notebook is FL90/91 comapl with Nvidia Geforce 8600M GT 512MB 128bit
this isnt releated to nvidia drivers what i now for now..Issue is also happening with nouveau drivers or with no drivers at all, my notebook works superbly under ubuntu Lucid with no any issue descibed above, so this isn't releated to falling hardware or anithing similar. why? Because with nouveau nvidia or non dirvers at all i had sam issue. this must be something with kernel or modules: i will tary to cp modules blacklisted from ubuntu instalation and put it in arch, maybe this will help you newer know.
topic that you mentioned doesnt consist of same problem as I have, Thx again
Offline
#6 2010-12-19 05:36:15
- G_Master
- Member
- Registered: 2010-12-12
- Posts: 5
Re: [Solved]uvesafb and nvidia randomly crash
Sounds kinda silly, but after looking at it again it almost seems like HAL and DBUS aren't running. Did you start them in the right order? Are they listed under daemons in /etc/rc.conf?
Poke around through here and then try starting your desktop manager again: https://wiki.archlinux.org/index.php/HAL
Offline
#7 2010-12-19 10:48:56
- Gusar
- Member
- Registered: 2009-08-25
- Posts: 3,605
Re: [Solved]uvesafb and nvidia randomly crash
G_Master wrote:
Sounds kinda silly, but after looking at it again it almost seems like HAL and DBUS aren't running. Did you start them in the right order? Are they listed under daemons in /etc/rc.conf?
Poke around through here and then try starting your desktop manager again: https://wiki.archlinux.org/index.php/HAL
His problem starts waaaaaaaaaaaaaay before either HAL or DBUS would enter the picture. And I don't have the slightest idea what either of those could have to do with the problem. The problem is somewhere in hardware initialization. So possibly in the kernel config.
@markoer: Compile a kernel with the same config as the Ubuntu kernel has. See if that works. Them compare the Ubuntu config with Arch's kernel26 config, maybe seeing the differences in the configs will give insight into how to solve the problem.
Last edited by Gusar (2010-12-19 10:49:28)
Offline
#8 2011-01-01 00:09:18
- juliusz81
- Member
- Registered: 2010-12-27
- Posts: 2
Re: [Solved]uvesafb and nvidia randomly crash
Hi
After last update I'm having similar problems with my laptop. Sometimes it's start normally, sometimes it doesn't work. I've tried Sabayon and Ubuntu. Worked fine until I've decided to upgrade them then the same problem. I've got FL90 with 8600M GT 256MB.
I won't help you much, because I'm still learning how to use linux but I think it's kernel problem. I've installed 2.6.34-ARCH #1 kernel and 260.19.29 NVIDIA drivers ( from nvidia's site, those from repository generates some error) and laptop works normally.
Offline
#9 2011-01-04 18:45:23
- b0f00narch
- Member
- Registered: 2010-11-03
- Posts: 14
Re: [Solved]uvesafb and nvidia randomly crash
+1
Also have FL90 laptop with 8600GT
Same discussion started here
Can't load nvidia module after kernel and nvidia update -> Pacman & Package Upgrade Issues
And a post to nvnews.net
8600M GT not supported in 260.19.29
modprobe nvidia
FATAL: Error inserting nvidia (/lib/modules/2.6.36-ARCH/kernel/drivers/video/nvidia.ko): No such devicelspci | grep VGA
01:00.0 VGA compatible controller: nVidia Corporation G84 [GeForce 8600M GT] (rev a1)dmesg
nvidia 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: enabling device (0000 -> 0003)
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0407) installed
NVRM: in this system is not supported by the 260.19.29 NVIDIA Linux
NVRM: graphics driver release. Please see 'Appendix A -
NVRM: Supported NVIDIA GPU Products' in this release's README,
NVRM: available on the Linux graphics driver download page at
NVRM: [url=http://www.nvidia.com]www.nvidia.com[/url].
nvidia: probe of 0000:01:00.0 failed with error -1
NVRM: The NVIDIA probe routine failed for 1 device(s).
NVRM: None of the NVIDIA graphics adapters were initialized! pacman -Qi nvidia
Name : nvidia
Version : 260.19.29-1
Depends On : kernel26>=2.6.36 kernel26<2.6.37 nvidia-utils=260.19.29 pacman -Qi kernel26
Name : kernel26
Version : 2.6.36.2-1 pacman -Qi kernel26-headers
Name : kernel26-headers
Version : 2.6.36.2-1 Last edited by b0f00narch (2011-01-04 18:45:50)
Offline
#10 2011-01-10 20:37:27
- markoer
- Member
- Registered: 2010-12-15
- Posts: 57
Re: [Solved]uvesafb and nvidia randomly crash
b0f00narch wrote:
+1
Also have FL90 laptop with 8600GTSame discussion started here
Can't load nvidia module after kernel and nvidia update -> Pacman & Package Upgrade IssuesAnd a post to nvnews.net
8600M GT not supported in 260.19.29modprobe nvidia FATAL: Error inserting nvidia (/lib/modules/2.6.36-ARCH/kernel/drivers/video/nvidia.ko): No such devicelspci | grep VGA 01:00.0 VGA compatible controller: nVidia Corporation G84 [GeForce 8600M GT] (rev a1)dmesg nvidia 0000:01:00.0: power state changed by ACPI to D0 nvidia 0000:01:00.0: power state changed by ACPI to D0 nvidia 0000:01:00.0: enabling device (0000 -> 0003) nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nvidia 0000:01:00.0: setting latency timer to 64 vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0407) installed NVRM: in this system is not supported by the 260.19.29 NVIDIA Linux NVRM: graphics driver release. Please see 'Appendix A - NVRM: Supported NVIDIA GPU Products' in this release's README, NVRM: available on the Linux graphics driver download page at NVRM: [url=http://www.nvidia.com]www.nvidia.com[/url]. nvidia: probe of 0000:01:00.0 failed with error -1 NVRM: The NVIDIA probe routine failed for 1 device(s). NVRM: None of the NVIDIA graphics adapters were initialized!pacman -Qi nvidia Name : nvidia Version : 260.19.29-1 Depends On : kernel26>=2.6.36 kernel26<2.6.37 nvidia-utils=260.19.29pacman -Qi kernel26 Name : kernel26 Version : 2.6.36.2-1pacman -Qi kernel26-headers Name : kernel26-headers Version : 2.6.36.2-1
no it is not same discusion, this guy compalins about Xorg, Nvidia issue which cant be started at all and it is releated to nvidia drivers. My issue is someway before inserting nvidia modules and it happens only when kernel reading froze for a couple of seconds in probing devices..
I didn't try yet "Gusar" suggestions, but i will when i get more times.Result will be posted soon I hope so
Offline
#11 2011-01-20 11:43:03
- markoer
- Member
- Registered: 2010-12-15
- Posts: 57
Re: [Solved]uvesafb and nvidia randomly crash
so,
this issue doesn't appear with config file from default ubuntu kernel which i used on kernel26-lts(compiled from source). Kernel succesfully pass this line desribed above and i am represented with GDM afterall with no errors of NVIDIA or XORG. I give you default kernel config file from ubuntu and default config from arch..They defer in some way..Now I wana know what solved this issue in ubuntu default config, which option
this is Ubuntu default .config file
http://pastebin.com/QRRJ0aTM
and here is default arch .config with precompiled kernel
http://pastebin.com/LWYi58V9
Last edited by markoer (2011-01-20 11:44:03)
Offline
#12 2011-01-21 17:16:02
- markoer
- Member
- Registered: 2010-12-15
- Posts: 57
Re: [Solved]uvesafb and nvidia randomly crash
i must show you once more my issue and how i solved it.
It happens randomly on almost every boot with precompiled kernels
kernel-2.6.36.arch
kernel-2.6.36-lts (which have similar error like these kernels but not the same)
kernel-2.6.37-ck
I also trayed with manualy kernel compilation
kernel-2-6-36-lts
kernel-2.6.32 (with ubuntu patches and default ubuntu config)
kernel-2.6.37-ck (with BFS)
so,
with default arch kernels and ck kernel my system wasn't able to boot or pass these lines correctly
pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 1640 (mask 007f)
this was problem.
kernel freezes for 5-10 sec and then boot continues but without v86d and nvidia modules inserted correctly, so i cant get nice tty and X can't start, then i was represented with error in inserting nvidia modules from X. (no souch device)
in other words:
If you take a look in my earlier posts you will see that nvidia was recognized, but in some other way which is not normal: Maybe memory reading was corupted or pci irq alocation faill (but i was thinking I will see those errors on screen before system would invoke kernel panic, so i exclude that). Wans't shure anymore, what is cousing this freeze, maybe accessing GPU bios, but firstly i trayed with other kernels jus to be certain that it was bios issue
so i create PKGBUILD for ubuntu kernel 2.6.32 with ubuntu patches, from lucid repositories, in this time I use ubuntu default config from their livecd.
upon compilation build was successful i reboot system and as you can guess , this time i was able to pass those lines above, only my gdm cant strart, but that is normal and i solved this with compiling nvidia drivers..
now, i tok ubuntu default config and compare it with arch config..there was many differences in all section and subsection but i was only give attention on PCI section, because everithing is telling me that. Right now i was certain that is something with arch default config, but i didnt have a time to investigate a bit more.
i also trayed with PKGBUILD from abs for kernel26-lts and ck and this time system freeze on power management event. System was responding to all request only my lcd doesnt show me nothing except those lines below, so one more prof for pci falling
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
pci 0000:00:1a.7: reg 10: [mem 0xf8404800-0xf8404bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xf8400000-0xf8403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
after a bit of research i trayed arch 2.6.36 kernel only with some boot param, in earlier posts some parameter was succesful like "noapm" but then my dual core becomes one core. So i was thinking what can couse this issue, i know that it was something with PCI, maybe GPU bios can't be directly accessed so i went to kernel site and red documentation. After digging through kernel documentation i found solution "pci=bios" which is forcing kernel to access pci bios with no direcly access and i was able to get X and uvesafb to work correctly for all the time.
also just to mention,
there must be something in default ubuntu config kernel file which allow me to pass described issues with ubuntu kernel, something in PCI section but for now i dont have time to for further research.
for now my Arch system work perfeclty with no boot freezing at all
regards
Offline
#13 2011-01-24 18:41:13
- juliusz81
- Member
- Registered: 2010-12-27
- Posts: 2
Re: [Solved]uvesafb and nvidia randomly crash
Thank you very much.
Maybe cause of problems with fl90 is that vbios is not in card but it is integrated with mainboard bios.
I've tried Ubuntu with newer kernel version ( 2.6.35 and 2.6.37) and there were also problems with detecting graphic card. It looks like the last working kernel version is 2.6.34.
Offline