You are not logged in.
Pages: 1
I'm running Arch on a Dell Latitude E5510, and ran into an issue with the laptop's display during boot. (My problems are exactly as described in this post: https://bbs.archlinux.org/viewtopic.php?pid=820097) A quick "nomodeset" fixed that, though it crippled any support for an external monitor. After some digging around, I discovered the "video=SVIDEO-1:d" fix, which now allows me to use an external monitor with the latest Intel driver (yay!), but the screen on the laptop is blank.
xrandr detects the laptop monitor...
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
eDP1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
1366x768 60.0 +
1024x768 60.0*
800x600 60.3 56.2
640x480 59.9
VGA1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 509mm x 286mm
1920x1080 60.0*+
1280x1024 75.0 60.0
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
And if I run "xrandr --output eDP1 --mode 1024x768", the laptop's screen tries to adjust itself, but there is still no output.
(Following the suggestions in the thread linked above prove unfruitful... I've inspected /sys/class/backlight/acpi_video0/brightness, and it's set to 15, so lurker's fix does nothing for me.)
Thanks in advance.
Offline
Anyone?
Offline
Pages: 1