You are not logged in.
Pages: 1
I want to start off by saying that I am LOVING Arch! Thank you to everyone who has contributed to this wonderful distro!
I am currently trying to get my machine setup so I have two separate sessions, one to my monitor and wired keyboard/mouse, and the other to my HDMI output and wireless keyboards and mice. I have had some success, but am running into a little problem. Right now my wireless keyboards are still feeding to my monitor's session, and I am not seeing any video to my HDMI.
My Xorg.0.log only contains two warnings:
(WW) Wireless Keyboard/Mouse: ignoring absolute axes.
(WW) Logitech USB Receiver: ignoring absolute axes.
But gdm/:0-greeter.log has quite a few more
(gdm-simple-greeter:1572): Gtk-WARNING **: gtkwidget.c:5676: widget not within a GtkWindow
** (gdm-simple-greeter:1572): WARNING **: Unable to read from file /etc/arch-release
** (gdm-simple-greeter:1572): WARNING **: Unable to load CK history: no seat-id found
** (gnome-power-manager:1571): WARNING **: Failed to send buffer
(gnome-power-manager:1571): atk-bridge-WARNING **: AT_SPI_REGISTRY was not started at session startup.
(gnome-power-manager:1571): atk-bridge-WARNING **: IOR not set.
(gnome-power-manager:1571): atk-bridge-WARNING **: AT_SPI_REGISTRY was not started at session startup.
(gnome-power-manager:1571): atk-bridge-WARNING **: IOR not set.
** (gdm-simple-greeter:1572): WARNING **: Failed to send buffer
(gnome-settings-daemon:1554): atk-bridge-WARNING **: AT_SPI_REGISTRY was not started at session startup.
(gnome-settings-daemon:1554): atk-bridge-WARNING **: IOR not set.
(gnome-settings-daemon:1554): atk-bridge-WARNING **: AT_SPI_REGISTRY was not started at session startup.
(gnome-settings-daemon:1554): atk-bridge-WARNING **: IOR not set.
(gnome-settings-daemon:1554): atk-bridge-WARNING **: AT_SPI_REGISTRY was not started at session startup.
(gnome-settings-daemon:1554): atk-bridge-WARNING **: IOR not set.
(gnome-settings-daemon:1554): atk-bridge-WARNING **: AT_SPI_REGISTRY was not started at session startup.
(gnome-settings-daemon:1554): atk-bridge-WARNING **: IOR not set.
(gnome-settings-daemon:1554): atk-bridge-WARNING **: AT_SPI_REGISTRY was not started at session startup.
(gnome-settings-daemon:1554): atk-bridge-WARNING **: IOR not set.
(gnome-settings-daemon:1554): atk-bridge-WARNING **: AT_SPI_REGISTRY was not started at session startup.
(gnome-settings-daemon:1554): atk-bridge-WARNING **: IOR not set.
(gnome-settings-daemon:1554): atk-bridge-WARNING **: AT_SPI_REGISTRY was not started at session startup.
(gnome-settings-daemon:1554): atk-bridge-WARNING **: IOR not set.
(polkit-gnome-authentication-agent-1:1573): polkit-gnome-1-WARNING **: Error enumerating temporary authorizations: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: Cannot determine session the caller is in
(polkit-gnome-authentication-agent-1:1573): polkit-gnome-1-WARNING **: Error enumerating temporary authorizations: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: Cannot determine session the caller is in
(polkit-gnome-authentication-agent-1:1573): polkit-gnome-1-WARNING **: Error enumerating temporary authorizations: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: Cannot determine session the caller is in
(polkit-gnome-authentication-agent-1:1573): polkit-gnome-1-WARNING **: Error enumerating temporary authorizations: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: Cannot determine session the caller is in
(polkit-gnome-authentication-agent-1:1573): polkit-gnome-1-WARNING **: Error enumerating temporary authorizations: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: Cannot determine session the caller is in
I am using the following xorg.conf and gdm/custom.conf
xorg
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Device" "/dev/input/mouse0"
EndSection
Section "InputDevice"
# Logitech Wireless
Identifier "Mouse1"
Driver "mouse"
Option "Device" "/dev/input/mouse1"
EndSection
Section "InputDevice"
# IOGear Wireless
Identifier "Mouse2"
Driver "mouse"
Option "Device" "/dev/input/mouse2"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
Option "Device" "/dev/input/event0"
EndSection
Section "InputDevice"
# Logitech wireless
Identifier "Keyboard1"
Driver "kbd"
Option "Device" "/dev/input/event6"
EndSection
Section "InputDevice"
# Iogear wireless
Identifier "Keyboard2"
Driver "kbd"
Option "Device" "/dev/input/event8"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "LG Electronics L1932TQ"
HorizSync 30.0 - 71.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "DENON, Ltd. DENON-AVAMP"
HorizSync 15.0 - 68.0
VertRefresh 23.0 - 61.0
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GT 430"
Option "RenderAccel" "true"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GT 430"
Option "RenderAccel" "true"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP-0: 1280x1024 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 800x600 +0+0; DFP-0: 640x480 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP-1: 1920x1080_60 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enabled"
EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "AllowEmptyInput" "false"
EndSection
Section "ServerLayout"
Identifier "Layout1"
Screen 0 "Screen1" 0 0
InputDevice "Keyboard1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard2" "CoreKeyboard"
InputDevice "Mouse2"
Option "AllowEmptyInput" "false"
EndSection
gdm/custom.conf
[daemon]
[security]
[xdmcp]
[greeter]
[chooser]
[debug]
[servers]
0=Standard -layout Layout0 vt7
0=TV -layout Layout1 vt12
If someone could point me in the right direction, I would greatly appreciate it.
Thank you
Offline
Bump .... one last run to see if anyone can help me out.
Thanks
Offline
Pages: 1