You are not logged in.
Hello there Archlinux folks!
Today, my beloved little home server, running Arch, was a real pain in the ... and I had to realize, the fact: I need the help of ppl who understand this better than I do.
As a related matter, I just bought a Network Media Player today, so I needed to modify my server a bit, like setup XBMC for upnp sharing, and Pacman showed me a "funny error message". With all due respect, I cannot reproduce the original anymore, - but it looked kinda same - since I tried to sync pacman with the repositories, and that somehow altered the current setup. Also tried to enable another repositories, but it did not helped.
Now if I try to install something, like # pacman -S xbmc the following error message is triggered:
[root@hoth estol]# pacman -S xbmc
függőségek feloldása...
belső ütközések keresése...
Célok (79): recode-3.6-6 enca-1.13-1 libmp4v2-1.9.1-1 faac-1.28-2
faad2-2.7-1 freetype2-2.4.4-2 fontconfig-2.8.0-1
fribidi-0.19.2-1 xextproto-7.1.2-1 libxext-1.2.0-1
libice-1.0.7-1 libsm-1.2.0-1 libxt-1.0.9-1 libxmu-1.1.0-1
inputproto-2.0.1-1 libxi-1.4.1-1 libdrm-2.4.23-2
xf86vidmodeproto-2.3.1-1 libxxf86vm-1.1.1-1 fixesproto-4.1.2-1
libxfixes-4.0.5-1 damageproto-1.2.1-1 libxdamage-1.1.3-1
libgl-7.10.0.git20110215-1 dri2proto-2.3-1 glproto-1.4.12-1
mesa-7.10.0.git20110215-1 glew-1.5.8-1 freeglut-2.6.0-1
jasper-1.900.1-6 libcddb-1.3.2-2 libcdio-0.82-1 libmad-0.15.1b-4
libmms-0.6-1 libmpeg2-0.5.1-1 libvorbis-1.3.2-1
alsa-lib-1.0.23-2 libsndfile-1.0.23-1 libsamplerate-0.1.7-1
xineramaproto-1.2.1-1 libxinerama-1.1.1-1 renderproto-0.11.1-1
libxrender-0.9.6-1 randrproto-1.3.2-1 libxrandr-1.3.1-1
recordproto-1.14.1-1 libxtst-1.2.0-1 sdl-1.2.14-6
sdl_image-1.2.10-2 libmikmod-3.1.12-3 smpeg-0.4.4-5
sdl_mixer-1.2.11-2 wavpack-4.60.1-1 mesa-demos-8.0.1-1
xf86dgaproto-2.1-1 libxxf86dga-1.1.2-1 compositeproto-0.4.2-1
libxcomposite-0.4.3-1 dmxproto-2.3.1-1 libdmx-1.1.1-1
xorg-xdpyinfo-1.2.0-1 xorg-xdriinfo-1.0.4-1 xorg-xev-1.1.0-1
xorg-xlsatoms-1.1.0-1 xcb-util-0.3.6-1 xorg-xlsclients-1.1.1-1
xorg-xprop-1.2.0-1 videoproto-2.3.1-1 libxv-1.0.6-1
xorg-xvinfo-1.1.1-1 xorg-xwininfo-1.1.1-1 xorg-utils-7.6-6
libmicrohttpd-0.9.7-1 libssh-0.4.8-1 libva-1.0.8-1
libmodplug-0.8.8.1-1 rtmpdump-2.3-3 lsb-release-1.4-10
xbmc-10.0-4
Teljes letöltendő méret: 39,00 MB
Teljes telepített méret: 133,01 MB
Kezdődhet a telepítés? [I/n] I
:: Csomagok letöltése a(z) extra repóból...
hiba: nem sikerült a(z) 'recode-3.6-6-i686.pkg.tar.xz' fájlt letölteni a ftp.mfa.kfki.hu helyről : No address record
hiba: nem sikerült a(z) 'enca-1.13-1-i686.pkg.tar.gz' fájlt letölteni a ftp.mfa.kfki.hu helyről : No address record
^Chiba: nem sikerült a(z) 'faad2-2.7-1-i686.pkg.tar.gz' fájlt letölteni a ftp.mfa.kfki.hu helyről : No address record
Interrupt signal received
Sorry about the language, it is localized for Hungarian.
hint:
hiba is for error
letölteni is for download
Teljes is for total
Telepít(telepítés, telepített) is for install(installing, installed)
Then I interrupt it, since it takes a long time.
The most confusing part is, that even a simple management command - like # pacman -Syu - is also triggering an error:
[root@hoth estol]# pacman -Syu
:: A csomagadatbázisok szinkronizálása...
hiba: nem sikerült a(z) 'core.db.tar.gz' fájlt letölteni a ftp.mfa.kfki.hu helyről : No address record
hiba: nem sikerült a(z) core frissítése (No address record)
^Chiba: nem sikerült a(z) 'extra.db.tar.gz' fájlt letölteni a ftp.mfa.kfki.hu helyről : No address record
Interrupt signal receivedSome technical details about the machine:
--------------------------------------------------------------------------------------------------------------------------
[estol@hoth ~]$ uname -a
Linux hoth 2.6.37-ARCH #1 SMP PREEMPT Fri Feb 18 16:58:42 UTC 2011 i686 Pentium III (Coppermine) GenuineIntel GNU/Linux[estol@hoth ~]$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 3
cpu MHz : 747.685
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pse36 mmx fxsr sse up
bogomips : 1495.67
clflush size : 32
cache_alignment : 32
address sizes : 36 bits physical, 32 bits virtual
power management:--------------------------------------------------------------------------------------------------------------------------
Also the recent Pacman log,
[2011-02-21 00:51] Running 'pacman -Syu'
[2011-02-21 00:51] synchronizing package lists
[2011-02-21 00:51] starting full system upgrade
[2011-02-21 00:52] upgraded tzdata (2010o-1 -> 2011b-1)
[2011-02-21 00:52] Generating locales...
[2011-02-21 00:52] en_US.UTF-8... done
[2011-02-21 00:52] en_US.ISO-8859-1... done
[2011-02-21 00:52] hu_HU.UTF-8... done
[2011-02-21 00:52] hu_HU.ISO-8859-2... done
[2011-02-21 00:52] Generation complete.
[2011-02-21 00:53] upgraded glibc (2.13-1 -> 2.13-4)
[2011-02-21 00:53] warning: /etc/bash.bashrc installed as /etc/bash.bashrc.pacnew
[2011-02-21 00:53] upgraded bash (4.1.009-3 -> 4.1.009-4)
[2011-02-21 00:53] upgraded binutils (2.21-3 -> 2.21-4)
[2011-02-21 00:53] upgraded curl (7.21.3-1 -> 7.21.4-2)
[2011-02-21 00:53] upgraded db (5.1.19-3 -> 5.1.25-1)
[2011-02-21 00:53] upgraded udev (165-1 -> 166-2)
[2011-02-21 00:53] upgraded device-mapper (2.02.82-2 -> 2.02.84-1)
[2011-02-21 00:53] >>> Updating module dependencies. Please wait ...
[2011-02-21 00:53] >>> MKINITCPIO SETUP
[2011-02-21 00:53] >>> ----------------
[2011-02-21 00:53] >>> If you use LVM2, Encrypted root or software RAID,
[2011-02-21 00:53] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2011-02-21 00:53] >>> More information about mkinitcpio setup can be found here:
[2011-02-21 00:53] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2011-02-21 00:53]
[2011-02-21 00:53] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2011-02-21 00:53] ==> Building image "default"
[2011-02-21 00:53] ==> Running command: /sbin/mkinitcpio -k 2.6.37-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2011-02-21 00:53] :: Begin build
[2011-02-21 00:53] :: Parsing hook [base]
[2011-02-21 00:53] :: Parsing hook [udev]
[2011-02-21 00:53] :: Parsing hook [autodetect]
[2011-02-21 00:53] :: Parsing hook [pata]
[2011-02-21 00:54] :: Parsing hook [scsi]
[2011-02-21 00:54] :: Parsing hook [sata]
[2011-02-21 00:54] :: Parsing hook [filesystems]
[2011-02-21 00:54] :: Generating module dependencies
[2011-02-21 00:54] :: Generating image '/boot/kernel26.img'...SUCCESS
[2011-02-21 00:54] ==> SUCCESS
[2011-02-21 00:54] ==> Building image "fallback"
[2011-02-21 00:54] ==> Running command: /sbin/mkinitcpio -k 2.6.37-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2011-02-21 00:54] :: Begin build
[2011-02-21 00:54] :: Parsing hook [base]
[2011-02-21 00:54] :: Parsing hook [udev]
[2011-02-21 00:54] :: Parsing hook [pata]
[2011-02-21 00:54] :: Parsing hook [scsi]
[2011-02-21 00:56] :: Parsing hook [sata]
[2011-02-21 00:56] :: Parsing hook [filesystems]
[2011-02-21 00:57] :: Generating module dependencies
[2011-02-21 00:57] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2011-02-21 00:57] ==> SUCCESS
[2011-02-21 00:57] upgraded kernel26 (2.6.37-5 -> 2.6.37.1-1)
[2011-02-21 00:57] upgraded libldap (2.4.23-1 -> 2.4.24-1)
[2011-02-21 00:57] upgraded lvm2 (2.02.82-2 -> 2.02.84-1)
[2011-02-21 00:57] upgraded mc (4.7.4-1 -> 4.7.5.1-1)
[2011-02-21 00:57] warning: /etc/ntp.conf installed as /etc/ntp.conf.pacnew
[2011-02-21 00:57] warning: /etc/conf.d/ntp-client.conf installed as /etc/conf.d/ntp-client.conf.pacnew
[2011-02-21 00:57] upgraded ntp (4.2.6.p2-1 -> 4.2.6.p3-1)
[2011-02-21 00:57] upgraded ppp (2.4.5-1 -> 2.4.5-2)
[2011-02-21 00:57] upgraded syslog-ng (3.2.1-1 -> 3.2.2-1)
[2011-02-21 00:57] upgraded vi (050325-3 -> 050325-4)
[2011-02-21 00:57] upgraded wget (1.12-3 -> 1.12-4)
[2011-02-21 19:57] Running 'pacman -U'
[2011-03-04 19:42] Running 'pacman -S ushare'
[2011-03-04 19:44] Running 'pacman -S ushare'
[2011-03-04 19:44] Running 'pacman -S ushare'
[2011-03-04 19:46] Running 'pacman -S ushare'
[2011-03-04 19:46] Running 'pacman -S mediatomb'
[2011-03-04 19:47] Running 'pacman -S mediatomb'
[2011-03-04 19:49] Running 'pacman -S ushare'
[2011-03-04 19:57] Running 'pacman -S ushare'
[2011-03-04 20:00] Running 'pacman -S ushare'
[2011-03-04 20:01] Running 'pacman -S ushare'
[2011-03-04 20:08] Running 'pacman -S ushare'
[2011-03-04 20:14] Running 'pacman -S ushare'
[2011-03-04 20:16] Running 'pacman -S ushare'
[2011-03-04 20:21] Running 'pacman -S ushare'
[2011-03-04 21:05] Running 'pacman -S ushare'
[2011-03-04 21:12] Running 'pacman -S ushare'
[2011-03-04 21:13] Running 'pacman -S mediatomb'
[2011-03-04 21:17] Running 'pacman -S ushare'
[2011-03-04 22:51] Running 'pacman -S ushare'
[2011-03-05 01:42] Running 'pacman -Sy xbmc'
[2011-03-05 01:42] synchronizing package lists
[2011-03-05 01:43] Running 'pacman -Syu'
[2011-03-05 01:43] synchronizing package lists
[2011-03-05 01:49] Running 'pacman -Syu'
[2011-03-05 01:49] synchronizing package lists
[2011-03-05 01:53] Running 'pacman -U'
[2011-03-05 01:53] Running 'pacman -U'
[2011-03-05 02:02] Running 'pacman -Syu'
[2011-03-05 02:02] synchronizing package lists
[2011-03-05 02:09] Running 'pacman -S xmbc'
[2011-03-05 02:11] Running 'pacman -S xmbc'
[2011-03-05 02:11] Running 'pacman -S xmbc'
[2011-03-05 02:12] Running 'pacman -Syu'
[2011-03-05 02:12] synchronizing package lists
[2011-03-05 02:17] Running 'pacman -S xbmc'The first entry is the last known use of Pacman, that was successful.
All help would be highly appreciated.
estol
Last edited by estol (2011-03-05 03:51:48)
Offline
Did you try switching to a different mirror?
Offline
Next time run 'LC_MESSAGES=C <command>' to get English messages instead of localized ones - much easier to google etc.
Offline
Does "ping ftp.mfa.kfki.hu" works to you?
.::. TigTex @ Portugal .::.
Offline
@skunktrader: yes, I tried, no it did not helped.
@karol: mea culpa, mea maxima culpa, a friend of mine hooked me up with this distro, and set it to be hungarian as default, now I know how to change it - to be honest, this language annoys the crap out of me.
@TigTex: yes, the host is alive, I can even browse the contents.
Thanks for all the help, as it turned out, the problem was hardware related. Time to put her down.
Last edited by estol (2011-03-05 03:52:39)
Offline