You are not logged in.
- Topics: Active | Unanswered
#1 2011-03-14 18:36:16
- siriusb
- Member
- From: Hungary
- Registered: 2010-01-01
- Posts: 422
[SOLVED] xf86-input-keyboard and xf86-input-mouse upgrade issue
Hi,
After a full system upgrade today my system stops after loading the modules defined in rc.conf and won't start X11.
My inittab line: x:5:respawn:/usr/sbin/gdm -nodaemon
I'm not sure what the problem is, but I only able to login with recovery mode. I attached some log files or part of them. Please help me resolve this problem. Thanks.
Pacman.log:
[2011-03-14 16:33] starting full system upgrade
[2011-03-14 16:34] upgraded bash (4.2.006-1 -> 4.2.007-1)
[2011-03-14 16:34] upgraded gdisk (0.6.14-1 -> 0.7.0-1)
[2011-03-14 16:34] upgraded gnutls (2.10.4-1 -> 2.10.5-1)
[2011-03-14 16:34] upgraded libraw1394 (2.0.5-1 -> 2.0.7-1)
[2011-03-14 16:34] upgraded libxt (1.0.9-1 -> 1.1.1-1)
[2011-03-14 16:34] upgraded m4 (1.4.15-1 -> 1.4.16-1)
[2011-03-14 16:34] upgraded p7zip (9.13-2 -> 9.20-1)
[2011-03-14 16:34] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2011-03-14 16:34] upgraded pacman-mirrorlist (20101223-1 -> 20110313-1)
[2011-03-14 16:34] upgraded sudo (1.8.0-3 -> 1.8.0-4)
[2011-03-14 16:34] upgraded syslinux (4.03-1 -> 4.03-4)
[2011-03-14 16:34] upgraded wpa_supplicant (0.7.3-1 -> 0.7.3-3)
[2011-03-14 16:34] upgraded xf86-input-evdev (2.6.0-1 -> 2.6.0-2)
[2011-03-14 16:34] upgraded xf86-input-keyboard (1.4.0-3 -> 1.6.0-1)
[2011-03-14 16:34] upgraded xf86-input-mouse (1.6.0-1 -> 1.7.0-1)
[2011-03-14 16:34] upgraded xf86-video-vesa (2.3.0-3 -> 2.3.0-4)
[2011-03-14 16:34] upgraded xorg-xkbcomp (1.2.1-1 -> 1.2.1-2)
[2011-03-14 16:34] upgraded xkeyboard-config (2.0-1 -> 2.1-1)
[2011-03-14 16:34] upgraded xorg-iceauth (1.0.4-1 -> 1.0.4-2)
[2011-03-14 16:34] upgraded xorg-luit (1.1.0-1 -> 1.1.0-2)
[2011-03-14 16:34] upgraded xorg-setxkbmap (1.2.0-1 -> 1.2.0-2)
[2011-03-14 16:34] upgraded xorg-server-common (1.9.4-1 -> 1.9.4.901-1)
[2011-03-14 16:34] upgraded xorg-server (1.9.4-1 -> 1.9.4.901-1)
[2011-03-14 16:34] upgraded xorg-sessreg (1.0.6-1 -> 1.0.6-2)
[2011-03-14 16:34] upgraded xorg-xcmsdb (1.0.3-1 -> 1.0.3-2)
[2011-03-14 16:34] upgraded xorg-xbacklight (1.1.2-1 -> 1.1.2-2)
[2011-03-14 16:34] upgraded xorg-xgamma (1.0.4-1 -> 1.0.4-2)
[2011-03-14 16:34] upgraded xorg-xhost (1.0.4-1 -> 1.0.4-2)
[2011-03-14 16:34] upgraded xorg-xinput (1.5.3-1 -> 1.5.3-2)
[2011-03-14 16:34] upgraded xorg-xmodmap (1.0.5-1 -> 1.0.5-2)
[2011-03-14 16:34] upgraded xorg-xrandr (1.3.4-1 -> 1.3.4-2)
[2011-03-14 16:34] upgraded xorg-xrdb (1.0.8-1 -> 1.0.8-2)
[2011-03-14 16:34] upgraded xorg-xrefresh (1.0.4-1 -> 1.0.4-2)
[2011-03-14 16:34] upgraded xorg-xset (1.2.1-1 -> 1.2.1-2)
[2011-03-14 16:34] upgraded xorg-xsetroot (1.1.0-1 -> 1.1.0-2)
[2011-03-14 16:34] upgraded xorg-server-utils (7.6-1 -> 7.6-2)
[2011-03-14 16:34] upgraded xorg-twm (1.0.6-1 -> 1.0.6-2)
[2011-03-14 16:34] upgraded xorg-xdpyinfo (1.2.0-1 -> 1.2.0-2)
[2011-03-14 16:34] upgraded xorg-xdriinfo (1.0.4-1 -> 1.0.4-2)
[2011-03-14 16:34] upgraded xorg-xev (1.1.0-1 -> 1.1.0-2)
[2011-03-14 16:34] upgraded xorg-xlsatoms (1.1.0-1 -> 1.1.0-2)
[2011-03-14 16:34] upgraded xorg-xlsclients (1.1.1-1 -> 1.1.1-2)
[2011-03-14 16:34] upgraded xorg-xprop (1.2.0-1 -> 1.2.0-2)
[2011-03-14 16:34] upgraded xorg-xvinfo (1.1.1-1 -> 1.1.1-2)
[2011-03-14 16:34] upgraded xorg-xwininfo (1.1.1-1 -> 1.1.1-2)
[2011-03-14 16:34] upgraded xorg-utils (7.6-6 -> 7.6-7)
[2011-03-14 16:34] upgraded xorg-x11perf (1.5.3-1 -> 1.5.3-2)
[2011-03-14 16:34] upgraded xorg-xauth (1.0.5-1 -> 1.0.5-2)
[2011-03-14 16:34] upgraded xorg-xcursorgen (1.0.4-1 -> 1.0.4-2)
[2011-03-14 16:34] upgraded xorg-xinit (1.3.0-2 -> 1.3.0-3)
[2011-03-14 16:34] upgraded xorg-xkbevd (1.1.2-1 -> 1.1.2-2)
[2011-03-14 16:34] upgraded xorg-xkbutils (1.0.3-1 -> 1.0.3-2)
[2011-03-14 16:34] upgraded xorg-xkill (1.0.3-1 -> 1.0.3-2)
[2011-03-14 16:34] upgraded xorg-xpr (1.0.3-1 -> 1.0.3-2)
[2011-03-14 16:34] upgraded xorg-xwd (1.0.4-1 -> 1.0.4-2)
[2011-03-14 16:34] upgraded xorg-xwud (1.0.3-1 -> 1.0.3-2)
[2011-03-14 16:34] upgraded xterm (267-1 -> 269-1)Kernel.log:
Mar 14 18:39:23 localhost kernel: nvidia: module license 'NVIDIA' taints kernel.
Mar 14 18:39:23 localhost kernel: Disabling lock debugging due to kernel taintXorg:
[ 624.875]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 624.876]
X.Org X Server 1.9.4.901 (1.9.5 RC 1)
Release Date: 2011-03-04
[ 624.876] X Protocol Version 11, Revision 0
[ 624.876] Build Operating System: Linux 2.6.37-ARCH x86_64
[ 624.876] Current Operating System: Linux arch 2.6.37-ARCH #1 SMP PREEMPT Tue Mar 8 08:34:35 CET 2011 x86_64
[ 624.876] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/mapper/REMOVED cryptdevice=/dev/disk/by-uuid/REMOVED ro single
[ 624.877] Build Date: 14 March 2011 10:38:06AM
[ 624.877]
[ 624.877] Current version of pixman: 0.20.2
[ 624.877] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 624.877] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 624.878] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 14 18:55:31 2011
[ 624.885] (==) Using config file: "/etc/X11/xorg.conf"
[ 624.885] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 624.899] (==) ServerLayout "Layout0"
[ 624.899] (**) |-->Screen "Screen0" (0)
[ 624.899] (**) | |-->Monitor "Monitor0"
[ 624.899] (**) | |-->Device "Device0"
[ 624.899] (**) |-->Input Device "Keyboard0"
[ 624.899] (**) |-->Input Device "Mouse0"
[ 624.899] (==) Automatically adding devices
[ 624.899] (==) Automatically enabling devices
[ 624.997] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 624.997] Entry deleted from font path.
[ 625.012] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 625.012] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 625.012] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 625.012] (WW) Disabling Keyboard0
[ 625.012] (WW) Disabling Mouse0
[ 625.012] (II) Loader magic: 0x7d42e0
[ 625.012] (II) Module ABI versions:
[ 625.012] X.Org ANSI C Emulation: 0.4
[ 625.012] X.Org Video Driver: 8.0
[ 625.012] X.Org XInput driver : 11.0
[ 625.012] X.Org Server Extension : 4.0
[ 625.014] (--) PCI:*(0:1:0:0) 10de:0640:19da:7046 rev 161, Mem @ 0xc6000000/16777216, 0xa0000000/536870912, 0xc4000000/33554432, I/O @ 0x00008000/128, BIOS @ 0x????????/524288
[ 625.014] (--) PCI: (0:5:1:0) 109e:036e:0000:0000 rev 17, Mem @ 0xca200000/4096
[ 625.014] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 625.014] (II) LoadModule: "extmod"
[ 625.090] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 625.100] (II) Module extmod: vendor="X.Org Foundation"
[ 625.100] compiled for 1.9.4.901, module version = 1.0.0
[ 625.100] Module class: X.Org Server Extension
[ 625.100] ABI class: X.Org Server Extension, version 4.0
[ 625.100] (II) Loading extension MIT-SCREEN-SAVER
[ 625.100] (II) Loading extension XFree86-VidModeExtension
[ 625.100] (II) Loading extension XFree86-DGA
[ 625.100] (II) Loading extension DPMS
[ 625.100] (II) Loading extension XVideo
[ 625.100] (II) Loading extension XVideo-MotionCompensation
[ 625.100] (II) Loading extension X-Resource
[ 625.100] (II) LoadModule: "dbe"
[ 625.109] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 625.121] (II) Module dbe: vendor="X.Org Foundation"
[ 625.121] compiled for 1.9.4.901, module version = 1.0.0
[ 625.121] Module class: X.Org Server Extension
[ 625.121] ABI class: X.Org Server Extension, version 4.0
[ 625.121] (II) Loading extension DOUBLE-BUFFER
[ 625.121] (II) LoadModule: "glx"
[ 625.121] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 625.799] (II) Module glx: vendor="NVIDIA Corporation"
[ 625.815] compiled for 4.0.2, module version = 1.0.0
[ 625.815] Module class: X.Org Server Extension
[ 625.815] (II) NVIDIA GLX Module 260.19.44 Sun Feb 27 22:56:46 PST 2011
[ 625.815] (II) Loading extension GLX
[ 625.815] (II) LoadModule: "record"
[ 625.815] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 625.818] (II) Module record: vendor="X.Org Foundation"
[ 625.818] compiled for 1.9.4.901, module version = 1.13.0
[ 625.818] Module class: X.Org Server Extension
[ 625.818] ABI class: X.Org Server Extension, version 4.0
[ 625.818] (II) Loading extension RECORD
[ 625.818] (II) LoadModule: "dri"
[ 625.819] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 625.849] (II) Module dri: vendor="X.Org Foundation"
[ 625.849] compiled for 1.9.4.901, module version = 1.0.0
[ 625.849] ABI class: X.Org Server Extension, version 4.0
[ 625.849] (II) Loading extension XFree86-DRI
[ 625.849] (II) LoadModule: "dri2"
[ 625.849] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 625.850] (II) Module dri2: vendor="X.Org Foundation"
[ 625.850] compiled for 1.9.4.901, module version = 1.2.0
[ 625.850] ABI class: X.Org Server Extension, version 4.0
[ 625.850] (II) Loading extension DRI2
[ 625.850] (II) LoadModule: "nvidia"
[ 625.850] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 625.919] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 625.924] compiled for 4.0.2, module version = 1.0.0
[ 625.924] Module class: X.Org Video Driver
[ 625.954] (II) NVIDIA dlloader X Driver 260.19.44 Sun Feb 27 22:42:21 PST 2011
[ 625.954] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 625.954] (--) using VT number 2
[ 625.958] (II) Loading sub module "fb"
[ 625.958] (II) LoadModule: "fb"
[ 625.958] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 625.972] (II) Module fb: vendor="X.Org Foundation"
[ 625.972] compiled for 1.9.4.901, module version = 1.0.0
[ 625.972] ABI class: X.Org ANSI C Emulation, version 0.4
[ 625.972] (II) Loading sub module "wfb"
[ 625.972] (II) LoadModule: "wfb"
[ 625.972] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 625.981] (II) Module wfb: vendor="X.Org Foundation"
[ 625.981] compiled for 1.9.4.901, module version = 1.0.0
[ 625.981] ABI class: X.Org ANSI C Emulation, version 0.4
[ 625.981] (II) Loading sub module "ramdac"
[ 625.981] (II) LoadModule: "ramdac"
[ 625.981] (II) Module "ramdac" already built-in
[ 626.011] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 626.011] (==) NVIDIA(0): RGB weight 888
[ 626.011] (==) NVIDIA(0): Default visual is TrueColor
[ 626.011] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 626.011] (**) NVIDIA(0): Option "NoLogo" "1"
[ 626.011] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP"
[ 626.011] (**) NVIDIA(0): Option "MetaModes" "1680x1050_60 +0+0"
[ 626.011] (**) NVIDIA(0): Option "Coolbits" "1"
[ 626.011] (**) NVIDIA(0): Option "TripleBuffer" "True"
[ 626.012] (**) NVIDIA(0): Enabling RENDER acceleration
[ 626.012] (**) NVIDIA(0): ConnectedMonitor string: "DFP"
[ 626.012] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 626.012] (II) NVIDIA(0): enabled.
[ 627.358] (II) NVIDIA(0): NVIDIA GPU GeForce 9500 GT (G96) at PCI:1:0:0 (GPU-0)
[ 627.358] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 627.358] (--) NVIDIA(0): VideoBIOS: 62.94.4b.00.00
[ 627.358] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 627.358] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 627.358] (--) NVIDIA(0): Connected display device(s) on GeForce 9500 GT at PCI:1:0:0
[ 627.358] (--) NVIDIA(0): Samsung SyncMaster (DFP-0)
[ 627.358] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[ 627.358] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Dual Link TMDS
[ 627.432] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 627.432] (II) NVIDIA(0): Validated modes:
[ 627.432] (II) NVIDIA(0): "1680x1050_60+0+0"
[ 627.432] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[ 627.461] (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
[ 627.461] (--) NVIDIA(0): option
[ 627.461] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 627.461] (--) Depth 24 pixmap format is 32 bpp
[ 627.461] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 627.462] (II) NVIDIA(0): Initialized GPU GART.
[ 627.465] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 627.465] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 627.465] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 627.465] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 627.465] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 627.465] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 627.465] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 627.465] (II) NVIDIA(0): Config Options in the README.
[ 627.467] (II) NVIDIA(0): Setting mode "1680x1050_60+0+0"
[ 627.496] (II) Loading extension NV-GLX
[ 627.526] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 627.560] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 627.560] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 627.560] (**) NVIDIA(0): Option "BackingStore" "True"
[ 627.560] (**) NVIDIA(0): Backing store enabled
[ 627.560] (==) NVIDIA(0): Silken mouse enabled
[ 627.574] (**) NVIDIA(0): DPMS enabled
[ 627.584] (II) Loading extension NV-CONTROL
[ 627.585] (II) Loading extension XINERAMA
[ 627.585] (II) Loading sub module "dri2"
[ 627.585] (II) LoadModule: "dri2"
[ 627.585] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[ 627.585] (II) NVIDIA(0): [DRI2] Setup complete
[ 627.585] (==) RandR enabled
[ 627.585] (II) Initializing built-in extension Generic Event Extension
[ 627.585] (II) Initializing built-in extension SHAPE
[ 627.585] (II) Initializing built-in extension MIT-SHM
[ 627.585] (II) Initializing built-in extension XInputExtension
[ 627.585] (II) Initializing built-in extension XTEST
[ 627.585] (II) Initializing built-in extension BIG-REQUESTS
[ 627.585] (II) Initializing built-in extension SYNC
[ 627.585] (II) Initializing built-in extension XKEYBOARD
[ 627.585] (II) Initializing built-in extension XC-MISC
[ 627.585] (II) Initializing built-in extension SECURITY
[ 627.585] (II) Initializing built-in extension XINERAMA
[ 627.585] (II) Initializing built-in extension XFIXES
[ 627.585] (II) Initializing built-in extension RENDER
[ 627.585] (II) Initializing built-in extension RANDR
[ 627.585] (II) Initializing built-in extension COMPOSITE
[ 627.585] (II) Initializing built-in extension DAMAGE
[ 627.587] (II) Initializing extension GLX
[ 628.170] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 628.170] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 628.170] (II) LoadModule: "evdev"
[ 628.171] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 628.187] (II) Module evdev: vendor="X.Org Foundation"
[ 628.187] compiled for 1.9.4, module version = 2.6.0
[ 628.187] Module class: X.Org XInput Driver
[ 628.187] ABI class: X.Org XInput driver, version 11.0
[ 628.187] (**) Power Button: always reports core events
[ 628.187] (**) Power Button: Device: "/dev/input/event4"
[ 628.203] (--) Power Button: Found keys
[ 628.203] (II) Power Button: Configuring as keyboard
[ 628.203] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 628.203] (**) Option "xkb_rules" "evdev"
[ 628.203] (**) Option "xkb_model" "evdev"
[ 628.203] (**) Option "xkb_layout" "us"
[ 628.232] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 628.232] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 628.232] (**) Power Button: always reports core events
[ 628.232] (**) Power Button: Device: "/dev/input/event3"
[ 628.243] (--) Power Button: Found keys
[ 628.243] (II) Power Button: Configuring as keyboard
[ 628.243] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 628.243] (**) Option "xkb_rules" "evdev"
[ 628.243] (**) Option "xkb_model" "evdev"
[ 628.243] (**) Option "xkb_layout" "us"
[ 628.245] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 628.245] (II) No input driver/identifier specified (ignoring)
[ 628.248] (II) config/udev: Adding input device Icon7 Z500 Gaming Laser Mouse (/dev/input/event1)
[ 628.248] (**) Icon7 Z500 Gaming Laser Mouse: Applying InputClass "evdev pointer catchall"
[ 628.248] (**) Icon7 Z500 Gaming Laser Mouse: always reports core events
[ 628.248] (**) Icon7 Z500 Gaming Laser Mouse: Device: "/dev/input/event1"
[ 628.270] (--) Icon7 Z500 Gaming Laser Mouse: Found 9 mouse buttons
[ 628.270] (--) Icon7 Z500 Gaming Laser Mouse: Found scroll wheel(s)
[ 628.270] (--) Icon7 Z500 Gaming Laser Mouse: Found relative axes
[ 628.270] (--) Icon7 Z500 Gaming Laser Mouse: Found x and y relative axes
[ 628.270] (II) Icon7 Z500 Gaming Laser Mouse: Configuring as mouse
[ 628.270] (II) Icon7 Z500 Gaming Laser Mouse: Adding scrollwheel support
[ 628.270] (**) Icon7 Z500 Gaming Laser Mouse: YAxisMapping: buttons 4 and 5
[ 628.270] (**) Icon7 Z500 Gaming Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 628.270] (II) XINPUT: Adding extended input device "Icon7 Z500 Gaming Laser Mouse" (type: MOUSE)
[ 628.270] (**) Icon7 Z500 Gaming Laser Mouse: (accel) keeping acceleration scheme 1
[ 628.270] (**) Icon7 Z500 Gaming Laser Mouse: (accel) acceleration profile 0
[ 628.270] (**) Icon7 Z500 Gaming Laser Mouse: (accel) acceleration factor: 2.000
[ 628.270] (**) Icon7 Z500 Gaming Laser Mouse: (accel) acceleration threshold: 4
[ 628.270] (II) Icon7 Z500 Gaming Laser Mouse: initialized for relative axes.
[ 628.270] (II) config/udev: Adding input device Icon7 Z500 Gaming Laser Mouse (/dev/input/mouse0)
[ 628.270] (II) No input driver/identifier specified (ignoring)
[ 628.276] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 628.276] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 628.276] (**) AT Translated Set 2 keyboard: always reports core events
[ 628.276] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 628.300] (--) AT Translated Set 2 keyboard: Found keys
[ 628.300] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 628.300] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 628.300] (**) Option "xkb_rules" "evdev"
[ 628.300] (**) Option "xkb_model" "evdev"
[ 628.300] (**) Option "xkb_layout" "us"
[ 628.300] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 628.300] (II) No input driver/identifier specified (ignoring)
[ 644.889] (II) Power Button: Close
[ 644.890] (II) UnloadModule: "evdev"
[ 644.909] (II) Power Button: Close
[ 644.910] (II) UnloadModule: "evdev"
[ 644.946] (II) Icon7 Z500 Gaming Laser Mouse: Close
[ 644.946] (II) UnloadModule: "evdev"
[ 644.999] (II) AT Translated Set 2 keyboard: Close
[ 645.000] (II) UnloadModule: "evdev"Last edited by siriusb (2011-03-15 09:26:35)
Offline
#2 2011-03-14 19:18:40
- bohoomil
- Banned
- Registered: 2010-09-04
- Posts: 2,377
- Website
Re: [SOLVED] xf86-input-keyboard and xf86-input-mouse upgrade issue
"Taint" means nothing but the fact that the driver you use is not free.
As for this line:
[ 625.012] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.-- try putting the following in your xorg.conf and see what happens.
Section "ServerLayout"
Option "AllowEmptyInput" "false"
EndSection:: Registered Linux User No. 223384
:: github
:: infinality-bundle+fonts: good looking fonts made easy
Offline
#3 2011-03-14 19:46:02
- siriusb
- Member
- From: Hungary
- Registered: 2010-01-01
- Posts: 422
Re: [SOLVED] xf86-input-keyboard and xf86-input-mouse upgrade issue
Thanks for your reply.
I tried what you suggested and also tried to boot without xorg.conf. Nothing.
Also, I changed inittab to boot into console instead of X11 and left only 3 daemons in rc.conf (syslog-ng, hal dbus) but it's still the same no more moves after loading daemons. And all daemons are marked done. I don't understand it.
I need my PC so I have to my backup but this issue is still need to be solved, so advices are appreciated.
Offline
#4 2011-03-14 19:48:09
- bohoomil
- Banned
- Registered: 2010-09-04
- Posts: 2,377
- Website
Re: [SOLVED] xf86-input-keyboard and xf86-input-mouse upgrade issue
Would you mind posting the output of dmesg?
BTW, what happens if you try to start X with startx? What output can you read?
Last edited by bohoomil (2011-03-14 19:58:11)
:: Registered Linux User No. 223384
:: github
:: infinality-bundle+fonts: good looking fonts made easy
Offline
#5 2011-03-14 20:01:41
- siriusb
- Member
- From: Hungary
- Registered: 2010-01-01
- Posts: 422
Re: [SOLVED] xf86-input-keyboard and xf86-input-mouse upgrade issue
Of course, I made a copy of /var/log.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.37-ARCH (tobias@T-POWA-LX) (gcc version 4.5.2 20110127 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Mar 8 08:34:35 CET 2011
Command line: BOOT_IMAGE=/vmlinuz26 root=/dev/mapper/REMOVED cryptdevice=/dev/disk/by-uuid/REMOVED:REMOVED rootdelay=3 ro quiet
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000009fee0000 (usable)
BIOS-e820: 000000009fee0000 - 000000009fee3000 (ACPI NVS)
BIOS-e820: 000000009fee3000 - 000000009fef0000 (ACPI data)
BIOS-e820: 000000009fef0000 - 000000009ff00000 (reserved)
BIOS-e820: 00000000c0000000 - 00000000c4000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: Gigabyte Technology Co., Ltd. 965P-DS4/965P-DS4, BIOS F12 06/25/2009
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x120000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CDFFF write-protect
CE000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FE0000000 write-back
2 base 100000000 mask FE0000000 write-back
3 base 09FF00000 mask FFFF00000 write-through
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0x9fee0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f5590] f5590
Scanning 0 areas for low memory corruption
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000009fee0000
0000000000 - 009fe00000 page 2M
009fe00000 - 009fee0000 page 4k
kernel direct mapping tables up to 9fee0000 @ 1fffb000-20000000
init_memory_mapping: 0000000100000000-0000000120000000
0100000000 - 0120000000 page 2M
kernel direct mapping tables up to 120000000 @ 9feda000-9fee0000
RAMDISK: 37a04000 - 37cfa000
ACPI: RSDP 00000000000f6f80 00014 (v00 GBT )
ACPI: RSDT 000000009fee3040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 000000009fee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 000000009fee3180 04B35 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 000000009fee0000 00040
ACPI: HPET 000000009fee7e00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 000000009fee7e80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: APIC 000000009fee7d00 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 000000009fee7f00 0015C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
ACPI: SSDT 000000009fee8390 00275 (v01 PmRef CpuPm 00003000 INTL 20040311)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88009c600000-ffff88009f1fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00120000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x0009fee0
0: 0x00100000 -> 0x00120000
On node 0 totalpages: 786029
DMA zone: 56 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3919 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 636696 pages, LIFO batch:31
Normal zone: 1792 pages used for memmap
Normal zone: 129280 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 000000009fee0000 - 000000009fee3000
PM: Registered nosave memory: 000000009fee3000 - 000000009fef0000
PM: Registered nosave memory: 000000009fef0000 - 000000009ff00000
PM: Registered nosave memory: 000000009ff00000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000c4000000
PM: Registered nosave memory: 00000000c4000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at c4000000 (gap: c4000000:3ac00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88009fc00000 s81664 r8192 d20736 u524288
pcpu-alloc: s81664 r8192 d20736 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 769895
Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/mapper/REMOVED cryptdevice=/dev/disk/by-uuid/REMOVED:REMOVED rootdelay=3 ro quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3015116k/4718592k available (3753k kernel code, 1574476k absent, 129000k reserved, 2000k data, 516k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptable hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 31457280 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2133.291 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4268.35 BogoMIPS (lpj=7110970)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20101013
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (8536.81 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xc0000000-0xc3ffffff] (base 0xc0000000)
PCI: MMCONFIG at [mem 0xc0000000-0xc3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 000000009fee8300 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0x9ff00000-0xfebfffff]
pci 0000:00:00.0: [8086:29a0] type 0 class 0x000600
pci 0000:00:01.0: [8086:29a1] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
pci 0000:00:1a.0: reg 20: [io 0xc000-0xc01f]
pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
pci 0000:00:1a.1: reg 20: [io 0xc400-0xc41f]
pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
pci 0000:00:1a.7: reg 10: [mem 0xca304000-0xca3043ff]
pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xca300000-0xca303fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0xc800-0xc81f]
pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0xcc00-0xcc1f]
pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0xd000-0xd01f]
pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xca305000-0xca3053ff]
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:2810] type 0 class 0x000601
pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
pci 0000:00:1f.2: [8086:2821] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0xd400-0xd407]
pci 0000:00:1f.2: reg 14: [io 0xd800-0xd803]
pci 0000:00:1f.2: reg 18: [io 0xdc00-0xdc07]
pci 0000:00:1f.2: reg 1c: [io 0xe000-0xe003]
pci 0000:00:1f.2: reg 20: [io 0xe400-0xe41f]
pci 0000:00:1f.2: reg 24: [mem 0xca306000-0xca3067ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xca307000-0xca3070ff]
pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
pci 0000:01:00.0: [10de:0640] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xc6000000-0xc6ffffff]
pci 0000:01:00.0: reg 14: [mem 0xa0000000-0xbfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xc4000000-0xc5ffffff 64bit]
pci 0000:01:00.0: reg 24: [io 0x8000-0x807f]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:01.0: bridge window [mem 0xc4000000-0xc7ffffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: [11ab:4362] type 0 class 0x000200
pci 0000:03:00.0: reg 10: [mem 0xc9000000-0xc9003fff 64bit]
pci 0000:03:00.0: reg 18: [io 0x9000-0x90ff]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.4: bridge window [mem 0xc8000000-0xc9ffffff]
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: [197b:2363] type 0 class 0x000101
pci 0000:04:00.0: reg 24: [mem 0xca000000-0xca001fff]
pci 0000:04:00.0: PME# supported from D3hot
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: [197b:2363] type 0 class 0x000101
pci 0000:04:00.1: reg 10: [io 0xa000-0xa007]
pci 0000:04:00.1: reg 14: [io 0xa400-0xa403]
pci 0000:04:00.1: reg 18: [io 0xa800-0xa807]
pci 0000:04:00.1: reg 1c: [io 0xac00-0xac03]
pci 0000:04:00.1: reg 20: [io 0xb000-0xb00f]
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io 0xa000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xca000000-0xca0fffff]
pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:01.0: [109e:036e] type 0 class 0x000400
pci 0000:05:01.0: reg 10: [mem 0xca200000-0xca200fff pref]
pci 0000:05:01.1: [109e:0878] type 0 class 0x000480
pci 0000:05:01.1: reg 10: [mem 0xca201000-0xca201fff pref]
pci 0000:05:06.0: [104c:8024] type 0 class 0x000c00
pci 0000:05:06.0: reg 10: [mem 0xca104000-0xca1047ff]
pci 0000:05:06.0: reg 14: [mem 0xca100000-0xca103fff]
pci 0000:05:06.0: supports D1 D2
pci 0000:05:06.0: PME# supported from D0 D1 D2 D3hot
pci 0000:05:06.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xca100000-0xca1fffff]
pci 0000:00:1e.0: bridge window [mem 0xca200000-0xca2fffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x9ff00000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009dc00 - 000000000009ffff
reserve RAM buffer: 000000009fee0000 - 000000009fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3f]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0x9ff00000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0010-0x001f]
pnp 00:01: [io 0x0022-0x003f]
pnp 00:01: [io 0x0044-0x005f]
pnp 00:01: [io 0x0062-0x0063]
pnp 00:01: [io 0x0065-0x006f]
pnp 00:01: [io 0x0074-0x007f]
pnp 00:01: [io 0x0091-0x0093]
pnp 00:01: [io 0x00a2-0x00bf]
pnp 00:01: [io 0x00e0-0x00ef]
pnp 00:01: [io 0x04d0-0x04d1]
pnp 00:01: [io 0x0290-0x029f]
pnp 00:01: [io 0x0800-0x087f]
pnp 00:01: [io 0x0290-0x0294]
pnp 00:01: [io 0x0880-0x088f]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0080-0x0090]
pnp 00:02: [io 0x0094-0x009f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [irq 0 disabled]
pnp 00:03: [irq 8]
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io 0x0070-0x0073]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x00f0-0x00ff]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io 0x03f8-0x03ff]
pnp 00:07: [irq 4]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: [io 0x0378-0x037f]
pnp 00:08: [irq 7]
pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:09: [io 0x0060]
pnp 00:09: [io 0x0064]
pnp 00:09: [irq 1]
pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:0a: [io 0x0400-0x04bf]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0xc0000000-0xc3ffffff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0x000d2a00-0x000d3fff]
pnp 00:0c: [mem 0x000f0000-0x000f7fff]
pnp 00:0c: [mem 0x000f8000-0x000fbfff]
pnp 00:0c: [mem 0x000fc000-0x000fffff]
pnp 00:0c: [mem 0x9fee0000-0x9fefffff]
pnp 00:0c: [mem 0x00000000-0x0009ffff]
pnp 00:0c: [mem 0x00100000-0x9fedffff]
pnp 00:0c: [mem 0xfec00000-0xfec00fff]
pnp 00:0c: [mem 0xfed10000-0xfed1dfff]
pnp 00:0c: [mem 0xfed20000-0xfed8ffff]
pnp 00:0c: [mem 0xfee00000-0xfee00fff]
pnp 00:0c: [mem 0xffb00000-0xffb7ffff]
pnp 00:0c: [mem 0xfff00000-0xffffffff]
pnp 00:0c: [mem 0x000e0000-0x000effff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0d: [mem 0xffb80000-0xffbfffff]
pnp 00:0d: Plug and Play ACPI device, IDs INT0800 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0290-0x029f] has been reserved
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: [io 0x0290-0x0294] has been reserved
system 00:01: [io 0x0880-0x088f] has been reserved
system 00:0a: [io 0x0400-0x04bf] could not be reserved
system 00:0b: [mem 0xc0000000-0xc3ffffff] has been reserved
system 00:0c: [mem 0x000d2a00-0x000d3fff] has been reserved
system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0c: [mem 0x9fee0000-0x9fefffff] could not be reserved
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x00100000-0x9fedffff] could not be reserved
system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0c: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
pci 0000:00:1c.0: BAR 14: assigned [mem 0xca400000-0xca5fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xca600000-0xca7fffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xca800000-0xca9fffff pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xcaa00000-0xcabfffff 64bit pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xc7000000-0xc707ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:01.0: bridge window [mem 0xc4000000-0xc7ffffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.0: bridge window [mem 0xca400000-0xca5fffff]
pci 0000:00:1c.0: bridge window [mem 0xca600000-0xca7fffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xca800000-0xca81ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.4: bridge window [mem 0xc8000000-0xc9ffffff]
pci 0000:00:1c.4: bridge window [mem 0xca800000-0xca9fffff pref]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io 0xa000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xca000000-0xca0fffff]
pci 0000:00:1c.5: bridge window [mem 0xcaa00000-0xcabfffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem 0xca100000-0xca1fffff]
pci 0000:00:1e.0: bridge window [mem 0xca200000-0xca2fffff 64bit pref]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x9ff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:01: resource 1 [mem 0xc4000000-0xc7ffffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:02: resource 1 [mem 0xca400000-0xca5fffff]
pci_bus 0000:02: resource 2 [mem 0xca600000-0xca7fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:03: resource 1 [mem 0xc8000000-0xc9ffffff]
pci_bus 0000:03: resource 2 [mem 0xca800000-0xca9fffff pref]
pci_bus 0000:04: resource 0 [io 0xa000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xca000000-0xca0fffff]
pci_bus 0000:04: resource 2 [mem 0xcaa00000-0xcabfffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xca100000-0xca1fffff]
pci_bus 0000:05: resource 2 [mem 0xca200000-0xca2fffff 64bit pref]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:05: resource 8 [mem 0x9ff00000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 3032k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880098600000 - ffff88009c600000
software IO TLB at phys 0x98600000 - 0x9c600000
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1300135052.266:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 5894
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
intel_idle: MWAIT substates: 0x20
intel_idle: does not run on family 6 model 15
ERST: Table is not found!
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2011-03-14 20:37:33 UTC (1300135053)
Initalizing network drop monitor service
Freeing unused kernel memory: 516k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
udev[37]: starting version 166
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xca304000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
SCSI subsystem initialized
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xca305000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
libata version 3.00 loaded.
pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001)
pata_jmicron 0000:04:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
pata_jmicron 0000:04:00.1: setting latency timer to 64
scsi0 : pata_jmicron
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0xa000 ctl 0xa400 bmdma 0xb000 irq 18
ata2: PATA max UDMA/100 cmd 0xa800 ctl 0xac00 bmdma 0xb008 irq 18
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c400
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c800
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m2048@0xca306000 port 0xca306100 irq 40
ata4: SATA max UDMA/133 abar m2048@0xca306000 port 0xca306180 irq 40
ata5: SATA max UDMA/133 abar m2048@0xca306000 port 0xca306200 irq 40
ata6: SATA max UDMA/133 abar m2048@0xca306000 port 0xca306280 irq 40
ata7: SATA max UDMA/133 abar m2048@0xca306000 port 0xca306300 irq 40
ata8: SATA max UDMA/133 abar m2048@0xca306000 port 0xca306380 irq 40
ahci 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:04:00.0: setting latency timer to 64
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m8192@0xca000000 port 0xca000100 irq 17
ata10: SATA max UDMA/133 abar m8192@0xca000000 port 0xca000180 irq 17
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata3.00: HPA detected: current 625140335, native 625142448
ata3.00: ATA-7: WDC WD3200AAKS-00VYA0, 12.01B01, max UDMA/133
ata3.00: 625140335 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5
usb 7-2: new full speed USB device using uhci_hcd and address 2
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB01, max UDMA/100
ata7.00: configured for UDMA/100
scsi 6:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223C SB01 PQ: 0 ANSI: 5
ata8: SATA link down (SStatus 0 SControl 300)
input: Icon7 Z500 Gaming Laser Mouse as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input1
generic-usb 0003:0461:4EA6.0001: input,hidraw0: USB HID v1.11 Mouse [Icon7 Z500 Gaming Laser Mouse] on usb-0000:00:1d.2-2/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sd 2:0:0:0: [sda] 625140335 512-byte logical blocks: (320 GB/298 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr0: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
sda: sda1 sda2 sda3 sda4 sda5 sda6
sd 2:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 sdb2
sd 4:0:0:0: [sdb] Attached SCSI disk
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
Intel AES-NI instructions are not detected.
padlock: VIA PadLock not detected.
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
udev[679]: starting version 166
ACPI: acpi_idle registered with cpuidle
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: Attached scsi generic sg1 type 0
sr 6:0:0:0: Attached scsi generic sg2 type 5
input: PC Speaker as /devices/platform/pcspkr/input/input2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
sky2: driver version 1.28
sky2 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:03:00.0: setting latency timer to 64
sky2 0000:03:00.0: Yukon-2 EC chip revision 2
sky2 0000:03:00.0: irq 41 for MSI/MSI-X
sky2 0000:03:00.0: eth0: addr 00:16:e6:83:ea:eb
vboxdrv: Found 2 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa02cdd40
vboxdrv: fAsync=0 offMin=0x2c8 offMax=0x11a0
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.0.4_OSE (interface 0x00160000).
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
IT8718 SuperIO detected.
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
fuse init (API version 7.15)
firewire_ohci 0000:05:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
firewire_ohci: Added fw-ohci device 0000:05:06.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
Linux video capture interface: v2.00
bttv: driver version 0.9.18 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
bttv0: Bt878 (rev 17) at 0000:05:01.0, irq: 19, latency: 32, mmio: 0xca200000
bttv0: using: Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF [card=78,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=003fffff [init]
bttv0: tuner type=5
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
lirc_dev: IR Remote Control driver registered, major 250
IR LIRC bridge handler initialized
bttv0: audio absent, no audio device found!
All bytes are equal. It is not a TEA5767
tuner 1-0060: chip found @ 0xc0 (bt878 #0 [sw])
firewire_core: created device fw0: GUID 0016e60000b91518, S400
tuner-simple 1-0060: creating new instance
tuner-simple 1-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.44 Sun Feb 27 22:41:03 PST 2011
EXT4-fs (dm-0): re-mounted. Opts: (null)
EXT4-fs (dm-0): re-mounted. Opts: (null)
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
Adding 2097148k swap on /media/kamra/Temp/swapfile. Priority:-1 extents:30 across:4751360k Offline
#6 2011-03-14 21:06:45
- bohoomil
- Banned
- Registered: 2010-09-04
- Posts: 2,377
- Website
Re: [SOLVED] xf86-input-keyboard and xf86-input-mouse upgrade issue
Take a look at your Xorg log: there seems to be a problem with your mouse / keyboard driver:
[ 628.270] (II) config/udev: Adding input device Icon7 Z500 Gaming Laser Mouse (/dev/input/mouse0)
[ 628.270] (II) No input driver/identifier specified (ignoring)
...
[ 628.300] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 628.300] (II) No input driver/identifier specified (ignoring)
...
[ 628.245] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 628.245] (II) No input driver/identifier specified (ignoring)
[ 644.889] (II) Power Button: Close
[ 644.890] (II) UnloadModule: "evdev"
[ 644.909] (II) Power Button: Close
[ 644.910] (II) UnloadModule: "evdev"
[ 644.946] (II) Icon7 Z500 Gaming Laser Mouse: Close
[ 644.946] (II) UnloadModule: "evdev"
[ 644.999] (II) AT Translated Set 2 keyboard: Close
[ 645.000] (II) UnloadModule: "evdev"If you run lsmod, is there evdev running after all? Do you get mouse / keyboard modules loaded? Just guessing but there may be the problem...
Try to start X server with startx and copy the output, please.
:: Registered Linux User No. 223384
:: github
:: infinality-bundle+fonts: good looking fonts made easy
Offline
#7 2011-03-14 21:32:39
- siriusb
- Member
- From: Hungary
- Registered: 2010-01-01
- Posts: 422
Re: [SOLVED] xf86-input-keyboard and xf86-input-mouse upgrade issue
I restored my backup, my system is up and running.
Here is my recent xorg.0.log. Does it tell something to you?
[ 34.463]
X.Org X Server 1.9.4
Release Date: 2011-02-04
[ 34.463] X Protocol Version 11, Revision 0
[ 34.463] Build Operating System: Linux 2.6.37-ARCH x86_64
[ 34.463] Current Operating System: Linux arch 2.6.37-ARCH #1 SMP PREEMPT Fri Feb 25 07:53:43 CET 2011 x86_64
[ 34.463] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/mapper/REMOVED cryptdevice=/dev/disk/by-uuid/REMOVED:REMOVED rootdelay=3 ro quiet
[ 34.463] Build Date: 04 February 2011 09:38:18PM
[ 34.463]
[ 34.463] Current version of pixman: 0.20.2
[ 34.463] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 34.463] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 34.464] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 14 21:03:56 2011
[ 34.493] (==) Using config file: "/etc/X11/xorg.conf"
[ 34.493] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 34.564] (==) ServerLayout "Layout0"
[ 34.564] (**) |-->Screen "Screen0" (0)
[ 34.564] (**) | |-->Monitor "Monitor0"
[ 34.564] (**) | |-->Device "Device0"
[ 34.564] (**) |-->Input Device "Keyboard0"
[ 34.564] (**) |-->Input Device "Mouse0"
[ 34.564] (==) Automatically adding devices
[ 34.564] (==) Automatically enabling devices
[ 35.036] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 35.036] Entry deleted from font path.
[ 35.208] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 35.208] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 35.208] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 35.208] (WW) Disabling Keyboard0
[ 35.208] (WW) Disabling Mouse0
[ 35.208] (II) Loader magic: 0x7d3b20
[ 35.208] (II) Module ABI versions:
[ 35.208] X.Org ANSI C Emulation: 0.4
[ 35.208] X.Org Video Driver: 8.0
[ 35.208] X.Org XInput driver : 11.0
[ 35.208] X.Org Server Extension : 4.0
[ 35.210] (--) PCI:*(0:1:0:0) 10de:0640:19da:7046 rev 161, Mem @ 0xc6000000/16777216, 0xa0000000/536870912, 0xc4000000/33554432, I/O @ 0x00008000/128, BIOS @ 0x????????/524288
[ 35.210] (--) PCI: (0:5:1:0) 109e:036e:0000:0000 rev 17, Mem @ 0xca200000/4096
[ 35.210] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 35.210] (II) LoadModule: "extmod"
[ 35.292] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 35.308] (II) Module extmod: vendor="X.Org Foundation"
[ 35.308] compiled for 1.9.4, module version = 1.0.0
[ 35.308] Module class: X.Org Server Extension
[ 35.308] ABI class: X.Org Server Extension, version 4.0
[ 35.308] (II) Loading extension MIT-SCREEN-SAVER
[ 35.308] (II) Loading extension XFree86-VidModeExtension
[ 35.308] (II) Loading extension XFree86-DGA
[ 35.308] (II) Loading extension DPMS
[ 35.308] (II) Loading extension XVideo
[ 35.308] (II) Loading extension XVideo-MotionCompensation
[ 35.308] (II) Loading extension X-Resource
[ 35.308] (II) LoadModule: "dbe"
[ 35.309] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 35.312] (II) Module dbe: vendor="X.Org Foundation"
[ 35.312] compiled for 1.9.4, module version = 1.0.0
[ 35.312] Module class: X.Org Server Extension
[ 35.312] ABI class: X.Org Server Extension, version 4.0
[ 35.312] (II) Loading extension DOUBLE-BUFFER
[ 35.312] (II) LoadModule: "glx"
[ 35.312] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 35.937] (II) Module glx: vendor="NVIDIA Corporation"
[ 35.950] compiled for 4.0.2, module version = 1.0.0
[ 35.950] Module class: X.Org Server Extension
[ 35.950] (II) NVIDIA GLX Module 260.19.36 Tue Jan 18 17:12:12 PST 2011
[ 35.950] (II) Loading extension GLX
[ 35.950] (II) LoadModule: "record"
[ 35.950] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 35.962] (II) Module record: vendor="X.Org Foundation"
[ 35.962] compiled for 1.9.4, module version = 1.13.0
[ 35.962] Module class: X.Org Server Extension
[ 35.962] ABI class: X.Org Server Extension, version 4.0
[ 35.962] (II) Loading extension RECORD
[ 35.962] (II) LoadModule: "dri"
[ 35.962] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 35.981] (II) Module dri: vendor="X.Org Foundation"
[ 35.981] compiled for 1.9.4, module version = 1.0.0
[ 35.981] ABI class: X.Org Server Extension, version 4.0
[ 35.981] (II) Loading extension XFree86-DRI
[ 35.981] (II) LoadModule: "dri2"
[ 35.981] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 35.987] (II) Module dri2: vendor="X.Org Foundation"
[ 35.987] compiled for 1.9.4, module version = 1.2.0
[ 35.987] ABI class: X.Org Server Extension, version 4.0
[ 35.987] (II) Loading extension DRI2
[ 35.987] (II) LoadModule: "nvidia"
[ 35.987] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 36.063] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 36.067] compiled for 4.0.2, module version = 1.0.0
[ 36.067] Module class: X.Org Video Driver
[ 36.095] (II) NVIDIA dlloader X Driver 260.19.36 Tue Jan 18 16:57:32 PST 2011
[ 36.095] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 36.095] (++) using VT number 7
[ 36.107] (II) Loading sub module "fb"
[ 36.107] (II) LoadModule: "fb"
[ 36.107] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 36.117] (II) Module fb: vendor="X.Org Foundation"
[ 36.118] compiled for 1.9.4, module version = 1.0.0
[ 36.118] ABI class: X.Org ANSI C Emulation, version 0.4
[ 36.118] (II) Loading sub module "wfb"
[ 36.118] (II) LoadModule: "wfb"
[ 36.118] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 36.136] (II) Module wfb: vendor="X.Org Foundation"
[ 36.136] compiled for 1.9.4, module version = 1.0.0
[ 36.136] ABI class: X.Org ANSI C Emulation, version 0.4
[ 36.136] (II) Loading sub module "ramdac"
[ 36.136] (II) LoadModule: "ramdac"
[ 36.136] (II) Module "ramdac" already built-in
[ 36.161] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 36.161] (==) NVIDIA(0): RGB weight 888
[ 36.161] (==) NVIDIA(0): Default visual is TrueColor
[ 36.161] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 36.161] (**) NVIDIA(0): Option "NoLogo" "1"
[ 36.161] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP"
[ 36.161] (**) NVIDIA(0): Option "MetaModes" "1680x1050_60 +0+0"
[ 36.161] (**) NVIDIA(0): Option "Coolbits" "1"
[ 36.161] (**) NVIDIA(0): Option "TripleBuffer" "True"
[ 36.162] (**) NVIDIA(0): Enabling RENDER acceleration
[ 36.162] (**) NVIDIA(0): ConnectedMonitor string: "DFP"
[ 36.162] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 36.162] (II) NVIDIA(0): enabled.
[ 37.526] (II) NVIDIA(0): NVIDIA GPU GeForce 9500 GT (G96) at PCI:1:0:0 (GPU-0)
[ 37.526] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 37.526] (--) NVIDIA(0): VideoBIOS: 62.94.4b.00.00
[ 37.526] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 37.526] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 37.526] (--) NVIDIA(0): Connected display device(s) on GeForce 9500 GT at PCI:1:0:0
[ 37.526] (--) NVIDIA(0): Samsung SyncMaster (DFP-0)
[ 37.526] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[ 37.526] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Dual Link TMDS
[ 37.600] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 37.600] (II) NVIDIA(0): Validated modes:
[ 37.600] (II) NVIDIA(0): "1680x1050_60+0+0"
[ 37.600] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[ 37.624] (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
[ 37.624] (--) NVIDIA(0): option
[ 37.624] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 37.624] (--) Depth 24 pixmap format is 32 bpp
[ 37.624] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 37.625] (II) NVIDIA(0): Initialized GPU GART.
[ 37.628] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 37.628] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 37.628] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 37.628] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 37.628] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 37.628] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 37.628] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 37.628] (II) NVIDIA(0): Config Options in the README.
[ 37.629] (II) NVIDIA(0): Setting mode "1680x1050_60+0+0"
[ 37.660] (II) Loading extension NV-GLX
[ 37.693] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 37.731] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 37.731] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 37.731] (**) NVIDIA(0): Option "BackingStore" "True"
[ 37.731] (**) NVIDIA(0): Backing store enabled
[ 37.731] (==) NVIDIA(0): Silken mouse enabled
[ 37.737] (**) NVIDIA(0): DPMS enabled
[ 37.749] (II) Loading extension NV-CONTROL
[ 37.750] (II) Loading extension XINERAMA
[ 37.750] (II) Loading sub module "dri2"
[ 37.750] (II) LoadModule: "dri2"
[ 37.750] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[ 37.750] (II) NVIDIA(0): [DRI2] Setup complete
[ 37.750] (==) RandR enabled
[ 37.750] (II) Initializing built-in extension Generic Event Extension
[ 37.750] (II) Initializing built-in extension SHAPE
[ 37.750] (II) Initializing built-in extension MIT-SHM
[ 37.750] (II) Initializing built-in extension XInputExtension
[ 37.750] (II) Initializing built-in extension XTEST
[ 37.750] (II) Initializing built-in extension BIG-REQUESTS
[ 37.750] (II) Initializing built-in extension SYNC
[ 37.750] (II) Initializing built-in extension XKEYBOARD
[ 37.750] (II) Initializing built-in extension XC-MISC
[ 37.750] (II) Initializing built-in extension SECURITY
[ 37.750] (II) Initializing built-in extension XINERAMA
[ 37.750] (II) Initializing built-in extension XFIXES
[ 37.751] (II) Initializing built-in extension RENDER
[ 37.751] (II) Initializing built-in extension RANDR
[ 37.751] (II) Initializing built-in extension COMPOSITE
[ 37.751] (II) Initializing built-in extension DAMAGE
[ 37.753] (II) Initializing extension GLX
[ 38.400] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 38.400] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 38.400] (II) LoadModule: "evdev"
[ 38.401] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 38.413] (II) Module evdev: vendor="X.Org Foundation"
[ 38.413] compiled for 1.9.4, module version = 2.6.0
[ 38.413] Module class: X.Org XInput Driver
[ 38.413] ABI class: X.Org XInput driver, version 11.0
[ 38.413] (**) Power Button: always reports core events
[ 38.413] (**) Power Button: Device: "/dev/input/event5"
[ 38.426] (--) Power Button: Found keys
[ 38.426] (II) Power Button: Configuring as keyboard
[ 38.426] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 38.426] (**) Option "xkb_rules" "evdev"
[ 38.426] (**) Option "xkb_model" "evdev"
[ 38.426] (**) Option "xkb_layout" "us"
[ 38.459] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 38.459] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 38.459] (**) Power Button: always reports core events
[ 38.459] (**) Power Button: Device: "/dev/input/event4"
[ 38.470] (--) Power Button: Found keys
[ 38.470] (II) Power Button: Configuring as keyboard
[ 38.470] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 38.470] (**) Option "xkb_rules" "evdev"
[ 38.470] (**) Option "xkb_model" "evdev"
[ 38.470] (**) Option "xkb_layout" "us"
[ 38.471] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
[ 38.471] (II) No input driver/identifier specified (ignoring)
[ 38.475] (II) config/udev: Adding input device Icon7 Z500 Gaming Laser Mouse (/dev/input/event1)
[ 38.475] (**) Icon7 Z500 Gaming Laser Mouse: Applying InputClass "evdev pointer catchall"
[ 38.475] (**) Icon7 Z500 Gaming Laser Mouse: always reports core events
[ 38.475] (**) Icon7 Z500 Gaming Laser Mouse: Device: "/dev/input/event1"
[ 38.500] (--) Icon7 Z500 Gaming Laser Mouse: Found 9 mouse buttons
[ 38.500] (--) Icon7 Z500 Gaming Laser Mouse: Found scroll wheel(s)
[ 38.500] (--) Icon7 Z500 Gaming Laser Mouse: Found relative axes
[ 38.500] (--) Icon7 Z500 Gaming Laser Mouse: Found x and y relative axes
[ 38.500] (II) Icon7 Z500 Gaming Laser Mouse: Configuring as mouse
[ 38.500] (II) Icon7 Z500 Gaming Laser Mouse: Adding scrollwheel support
[ 38.500] (**) Icon7 Z500 Gaming Laser Mouse: YAxisMapping: buttons 4 and 5
[ 38.500] (**) Icon7 Z500 Gaming Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 38.500] (II) XINPUT: Adding extended input device "Icon7 Z500 Gaming Laser Mouse" (type: MOUSE)
[ 38.500] (**) Icon7 Z500 Gaming Laser Mouse: (accel) keeping acceleration scheme 1
[ 38.500] (**) Icon7 Z500 Gaming Laser Mouse: (accel) acceleration profile 0
[ 38.500] (**) Icon7 Z500 Gaming Laser Mouse: (accel) acceleration factor: 2.000
[ 38.500] (**) Icon7 Z500 Gaming Laser Mouse: (accel) acceleration threshold: 4
[ 38.500] (II) Icon7 Z500 Gaming Laser Mouse: initialized for relative axes.
[ 38.500] (II) config/udev: Adding input device Icon7 Z500 Gaming Laser Mouse (/dev/input/mouse0)
[ 38.500] (II) No input driver/identifier specified (ignoring)
[ 38.506] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 38.506] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 38.506] (**) AT Translated Set 2 keyboard: always reports core events
[ 38.506] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 38.523] (--) AT Translated Set 2 keyboard: Found keys
[ 38.523] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 38.523] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 38.523] (**) Option "xkb_rules" "evdev"
[ 38.523] (**) Option "xkb_model" "evdev"
[ 38.523] (**) Option "xkb_layout" "us"
[ 38.524] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 38.524] (II) No input driver/identifier specified (ignoring)Offline
#8 2011-03-14 22:15:29
- bohoomil
- Banned
- Registered: 2010-09-04
- Posts: 2,377
- Website
Re: [SOLVED] xf86-input-keyboard and xf86-input-mouse upgrade issue
Yep, probably that was the problem. There's still a little glitch at the end, but the keyboard seems running and so does your mouse. Just compare those two logs and see the difference. All in all, I'm happy you've defeated the beast. 
Last edited by bohoomil (2011-03-14 22:16:20)
:: Registered Linux User No. 223384
:: github
:: infinality-bundle+fonts: good looking fonts made easy
Offline
#9 2011-03-14 22:53:34
- siriusb
- Member
- From: Hungary
- Registered: 2010-01-01
- Posts: 422
Re: [SOLVED] xf86-input-keyboard and xf86-input-mouse upgrade issue
Unfortunately I haven't. If I run a system upgrade again, I'll be in the same situation and I still don't know how to fix this issue. 
Offline
#10 2011-03-14 23:25:35
- bohoomil
- Banned
- Registered: 2010-09-04
- Posts: 2,377
- Website
Re: [SOLVED] xf86-input-keyboard and xf86-input-mouse upgrade issue
Getting back to your pacman log... You may consider not installing / upgrading
[2011-03-14 16:34] upgraded xf86-input-keyboard (1.4.0-3 -> 1.6.0-1)
[2011-03-14 16:34] upgraded xf86-input-mouse (1.6.0-1 -> 1.7.0-1)In many cases evdev, providing a generic input driver, should do the job. I just double checked my machines in case I was writing nonsense, but the only ones I have are xf86-input-evdev and xf86-input-synaptics, and I have no problem using external keyboards and mice with full functionality. The double driver in your case might have been the reason of confusion for your system which in the end unloaded evdev and left you with no input driver at all.
:: Registered Linux User No. 223384
:: github
:: infinality-bundle+fonts: good looking fonts made easy
Offline
#11 2011-03-15 09:25:51
- siriusb
- Member
- From: Hungary
- Registered: 2010-01-01
- Posts: 422
Re: [SOLVED] xf86-input-keyboard and xf86-input-mouse upgrade issue
Thanks for you help, bohoomil.
I removed xf86-input-keyboard and xf86-input-mouse packages (xorg.conf, too). I rebooted and my system didn't failed so I did a full system upgrade again. This time I was able to reboot without any problem. So the mentioned 2 packages were unnecessary since evdev handles the input devices as you told.
I'll modify the topic's title since it wasn't a xorg-server issue.
Offline
#12 2011-03-16 01:51:43
- bohoomil
- Banned
- Registered: 2010-09-04
- Posts: 2,377
- Website
Re: [SOLVED] xf86-input-keyboard and xf86-input-mouse upgrade issue
I'm very happy to hear that. However, I'm watching closely the xorg updates: there have been many reports of issues afterwards, so whatever happens keep in your cache an older copy of working xorg and your OS backup as well... Just in case...
Good luck!
:: Registered Linux User No. 223384
:: github
:: infinality-bundle+fonts: good looking fonts made easy
Offline