Arch Linux

amrdarwish

Member

Registered: 2010-09-29

Posts: 19

rtl 8187 really i need help

hallo

i have prb with my card on arch linux

uname -r
2.6.37-ARCH

i have laptop asus and used usb rtl 8187

lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 174f:6a31 Syntek Web Cam - Asus A8J, F3S, F5R, VX2S, V1S
Bus 002 Device 006: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter
Bus 007 Device 002: ID 0b05:1712 ASUSTek Computer, Inc. BT-183 Bluetooth 2.0+EDR adapter

as any way my prb that when i conect the card its work but i cant go for any wepsite i can conect the network and i can choose any net work but i cant just go for 20 s for any website after this no more i dont know what is my prb i try othere linux its have same prb but when i conect my card for any windows pc its work and i work now with my lap with eth0 comnected from my windows and my windows pc conect to the net work with rtl8187

im not english man so sorry for my bad langauge

wit for answer

amrlinuxroot@gmail.com

---

إذا الشّعْبُ  يَوْمَاً  أرَادَ   الْحَيَـاةَ          فَلا  بُدَّ  أنْ  يَسْتَجِيبَ   القَـدَر
وَلا بُـدَّ  لِلَّيـْلِ أنْ  يَنْجَلِــي               وَلا  بُدَّ  للقَيْدِ  أَنْ   يَـنْكَسِـر
وَمَنْ  لَمْ  يُعَانِقْهُ  شَوْقُ  الْحَيَـاةِ          تَبَخَّـرَ  في  جَوِّهَـا   وَانْدَثَـر
  فَوَيْلٌ  لِمَنْ  لَمْ   تَشُقْـهُ   الْحَيَاةُ           مِنْ   صَفْعَـةِ  العَـدَم  المُنْتَصِر

ewaller

Administrator

From: Pasadena, CA

Registered: 2009-07-13

Posts: 20,353

Re: rtl 8187 really i need help

Okay, I  understand English is not your native language.  Regardless, your non-use of your shift key and punctuation renders your post nearly unreadable.  Spell words out -- this is not an SMS message board.  Capitalize 'I', proper nouns, and the beginning words in sentences.

The card you specified is a wireless card.  What steps have you taken so far? What wiki entries have you read? How are you connecting? (iwconfig?, networkmanager?, wicd?)  As a minimum, please post the output of :
lspci
ifconfig -a
and
iwconfig

---

Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way

amrdarwish

Member

Registered: 2010-09-29

Posts: 19

Re: rtl 8187 really i need help

lspci

lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc RV530LE [Radeon X1600]
02:00.0 Ethernet controller: Atheros Communications L1 Gigabit Ethernet (rev b0)
03:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
04:00.0 SATA controller: JMicron Technology Corp. JMB360 AHCI Controller (rev 02)
08:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
09:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
09:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
09:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
09:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
[amr@amrlinuxroot Documents]$

ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:1B:FC:FD:47:07 
          inet addr:192.168.1.2  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::21b:fcff:fefd:4707/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:14299 errors:0 dropped:0 overruns:0 frame:0
          TX packets:13413 errors:0 dropped:0 overruns:0 carrier:2
          collisions:0 txqueuelen:1000
          RX bytes:8900508 (8.4 Mb)  TX bytes:1788496 (1.7 Mb)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:620 errors:0 dropped:0 overruns:0 frame:0
          TX packets:620 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:23880 (23.3 Kb)  TX bytes:23880 (23.3 Kb)

wlan0     Link encap:Ethernet  HWaddr 00:13:E8:7D:04:A1 
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

wlan0     IEEE 802.11gn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=0 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off

as any way my card is usb 8187

---

إذا الشّعْبُ  يَوْمَاً  أرَادَ   الْحَيَـاةَ          فَلا  بُدَّ  أنْ  يَسْتَجِيبَ   القَـدَر
وَلا بُـدَّ  لِلَّيـْلِ أنْ  يَنْجَلِــي               وَلا  بُدَّ  للقَيْدِ  أَنْ   يَـنْكَسِـر
وَمَنْ  لَمْ  يُعَانِقْهُ  شَوْقُ  الْحَيَـاةِ          تَبَخَّـرَ  في  جَوِّهَـا   وَانْدَثَـر
  فَوَيْلٌ  لِمَنْ  لَمْ   تَشُقْـهُ   الْحَيَاةُ           مِنْ   صَفْعَـةِ  العَـدَم  المُنْتَصِر

amrdarwish

Member

Registered: 2010-09-29

Posts: 19

Re: rtl 8187 really i need help

i have 2 cards in my laptop and one is usb

---

إذا الشّعْبُ  يَوْمَاً  أرَادَ   الْحَيَـاةَ          فَلا  بُدَّ  أنْ  يَسْتَجِيبَ   القَـدَر
وَلا بُـدَّ  لِلَّيـْلِ أنْ  يَنْجَلِــي               وَلا  بُدَّ  للقَيْدِ  أَنْ   يَـنْكَسِـر
وَمَنْ  لَمْ  يُعَانِقْهُ  شَوْقُ  الْحَيَـاةِ          تَبَخَّـرَ  في  جَوِّهَـا   وَانْدَثَـر
  فَوَيْلٌ  لِمَنْ  لَمْ   تَشُقْـهُ   الْحَيَاةُ           مِنْ   صَفْعَـةِ  العَـدَم  المُنْتَصِر

ewaller

Administrator

From: Pasadena, CA

Registered: 2009-07-13

Posts: 20,353

Re: rtl 8187 really i need help

Okay, that all looks reasonable.  Next, what can you tell us about the wireless network to which you want to connect.  Do you know the name of the network (the SSID)? is it open, or is it encrypted?  If it is encrypted, is it WEP or WPA?

If you would, could you now post the output of :

sudo iwlist scan

---

Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way

amrdarwish

Member

Registered: 2010-09-29

Posts: 19

Re: rtl 8187 really i need help

my prb not to make scan or any my brp my net so slow with rtl 8187 its conected and signal is good but i cant open my msn or skype or any http

---

إذا الشّعْبُ  يَوْمَاً  أرَادَ   الْحَيَـاةَ          فَلا  بُدَّ  أنْ  يَسْتَجِيبَ   القَـدَر
وَلا بُـدَّ  لِلَّيـْلِ أنْ  يَنْجَلِــي               وَلا  بُدَّ  للقَيْدِ  أَنْ   يَـنْكَسِـر
وَمَنْ  لَمْ  يُعَانِقْهُ  شَوْقُ  الْحَيَـاةِ          تَبَخَّـرَ  في  جَوِّهَـا   وَانْدَثَـر
  فَوَيْلٌ  لِمَنْ  لَمْ   تَشُقْـهُ   الْحَيَاةُ           مِنْ   صَفْعَـةِ  العَـدَم  المُنْتَصِر

TigTex

Member

From: Portugal

Registered: 2008-06-19

Posts: 301

Re: rtl 8187 really i need help

just do:

iwconfig wlan0 rate 1M

it's a know bug, across all distros.

all explained here:
https://wiki.archlinux.org/index.php/Rtl8187_wireless

you will have poor performance on linux...

---

.::. TigTex @ Portugal .::.

amrdarwish

Member

Registered: 2010-09-29

Posts: 19

Re: rtl 8187 really i need help

its  not fix my prb i was do all this

---

إذا الشّعْبُ  يَوْمَاً  أرَادَ   الْحَيَـاةَ          فَلا  بُدَّ  أنْ  يَسْتَجِيبَ   القَـدَر
وَلا بُـدَّ  لِلَّيـْلِ أنْ  يَنْجَلِــي               وَلا  بُدَّ  للقَيْدِ  أَنْ   يَـنْكَسِـر
وَمَنْ  لَمْ  يُعَانِقْهُ  شَوْقُ  الْحَيَـاةِ          تَبَخَّـرَ  في  جَوِّهَـا   وَانْدَثَـر
  فَوَيْلٌ  لِمَنْ  لَمْ   تَشُقْـهُ   الْحَيَاةُ           مِنْ   صَفْعَـةِ  العَـدَم  المُنْتَصِر

mr.entropy

Member

Registered: 2010-10-29

Posts: 10

Re: rtl 8187 really i need help

you will have poor performance on linux...

I had the same problem... until I lowered txpower from 30 to 25:

iwconfig wlan0 txpower 25
iwconfig wlan0 rate 5.5M fixed

I don't know why, now is much much faster (same as windoze)!
Even the dhcp timeout problem is gone!

My USB dongle is a Sinmax 1000mW using rtl8187 default kernel driver.
/etc/conf.d/wireless-regdom set to BO to enable 30dBm txpower.
If someone can confirm this, could be added to the WIKI.

I hope it helps.

Last edited by mr.entropy (2011-06-08 21:51:55)