You are not logged in.

#26 2005-06-05 10:56:07

i3839
Member
Registered: 2004-02-04
Posts: 1,185

Re: lshwd 2.0

Yes, I can vaguely remember reading that, but I think that's only for newer kernel versions, so if you don't mind that then drop it. I don't have any pcmcia cards, so can't test for you.

Offline

#27 2005-06-05 17:35:38

z4ziggy
Member
From: Israel
Registered: 2004-03-29
Posts: 573
Website

Re: lshwd 2.0

k, here it is for your testings -
http://user-contributions.org/projects/ … rc1.tar.gz

please report any problems with the new engine...

> changes

version 2.0-rc1
+ recoded all detection methods
+ removed pci/usbutils dependencies and parsing /proc/bus instead
+ removed pcmcia scanner (pcmcia devices listed under /proc/bus/pci)
+ added subvendorid/subdeviceid for pci devices
+ fixed colors for light-backround terminals

enjoy smile

Offline

#28 2005-06-05 17:42:53

CyberTron
Member
From: Gotland ,Sweden
Registered: 2005-03-17
Posts: 645
Website

Re: lshwd 2.0

I like it big_smile

works perfectly so far


http://www.linuxportalen.com  -> Linux Help portal for Linux and ArchLinux (in swedish)

Dell Inspiron 8500
Kernel 2.6.14-archck1  (selfcompiled)
Enlightenment 17

Offline

#29 2005-06-05 19:11:51

z4ziggy
Member
From: Israel
Registered: 2004-03-29
Posts: 573
Website

Re: lshwd 2.0

fixed ugly usb module name bug. get 2.0-rc2 here :

http://user-contributions.org/projects/ … rc2.tar.gz

Offline

#30 2005-06-05 19:22:05

CyberTron
Member
From: Gotland ,Sweden
Registered: 2005-03-17
Posts: 645
Website

Re: lshwd 2.0

it fails to detect which module that is needed for my firewire hardware (Texas Instruments|PCI 4510 iEEE-1394 controller )

otherwise all look good (well, my nvidia geforce 4200go is recognised and the module it wanna load is vesa..but then again, not everyone has nvidia drivers loaded big_smile)


http://www.linuxportalen.com  -> Linux Help portal for Linux and ArchLinux (in swedish)

Dell Inspiron 8500
Kernel 2.6.14-archck1  (selfcompiled)
Enlightenment 17

Offline

#31 2005-06-05 19:55:52

leeghoofd
Member
From: the Netherlands
Registered: 2005-04-28
Posts: 61

Re: lshwd 2.0

Hello, I tested lshwd-2.0-r2 but it doesn't show any output

what I did was
tar -xzf lshwd-2.0-rc2.tar.gz
cd lshwd-2.0-rc2
make
./lshwd

but than it doesn't output anything

the old lshwd (form pacman) works

Please tell me if you need more info or if I do something wrong wink

David

Offline

#32 2005-06-05 20:00:29

z4ziggy
Member
From: Israel
Registered: 2004-03-29
Posts: 573
Website

Re: lshwd 2.0

try with using "root" maybe.

Offline

#33 2005-06-05 20:18:44

leeghoofd
Member
From: the Netherlands
Registered: 2005-04-28
Posts: 61

Re: lshwd 2.0

thanks, under root it works!

the old lshwd also works as a user, maybe it should show a error message when not root?

David

Offline

#34 2005-06-05 20:39:40

z4ziggy
Member
From: Israel
Registered: 2004-03-29
Posts: 573
Website

Re: lshwd 2.0

done. now users can browse devices as before. also, as before, only root is able to retrieve the usbfs module name if one isnt found in the usbtable.

lshwd 2.0-rc3 : http://user-contributions.org/projects/ … rc3.tar.gz

Offline

#35 2005-06-06 08:43:19

xerverius
Member
From: ~
Registered: 2004-11-02
Posts: 230
Website

Re: lshwd 2.0

I love lshwd and hwd, it's so much faster as hotplug smile

Offline

#36 2005-06-06 13:45:16

Pierre
Developer
From: Bonn
Registered: 2004-07-05
Posts: 1,950
Website

Re: lshwd 2.0

Would it be possible to detect the parallel-port and printer? And I noticed it detects my Scanner and assigns the modul "scanner" which does not exist in kernel 2.6

Offline

#37 2005-06-06 15:48:01

z4ziggy
Member
From: Israel
Registered: 2004-03-29
Posts: 573
Website

Re: lshwd 2.0

hmm... intresting... i never thought about printer detection... i have no idea if/how this can be done, but i'll check it out.

regarding the "scanner" module - what is the correct module name for 2.6? this should be changed in the pcitable file. please submit the new module name (here or to Rasat which maintain the table files) so we can update it. tnx.


:idea: and now for some great news :
2.0-rc4 is nearly finished - i added sysfs support and it was easy enough tnx to the new lshwd structure. the usb gave me a bit of a headache but its all sorted now. im just waiting for some firewire devices to code the sysfs_firewire detection. currently both procfs & sysfs methods are supported in lshwd (switch to sysfs with -s parameter), and i might remove the procfs in the future, but not likely soon. another option is to use sysfs as default and move procfs as optional. still need todo some more debugging before final decision...

stay tuned smile

Offline

#38 2005-06-06 18:47:46

Pierre
Developer
From: Bonn
Registered: 2004-07-05
Posts: 1,950
Website

Re: lshwd 2.0

Modules loaded by hotplug:

[pierre@athlon ~]$ lsmod
Module                  Size  Used by
nvidia               3914300  12
snd_emu10k1           103684  2
snd_rawmidi            26272  1 snd_emu10k1
snd_seq_device          8460  2 snd_emu10k1,snd_rawmidi
snd_ac97_codec         77944  1 snd_emu10k1
snd_pcm_oss            55584  0
snd_mixer_oss          20544  1 snd_pcm_oss
snd_pcm                97608  4 snd_emu10k1,snd_ac97_codec,snd_pcm_oss
snd_timer              26948  2 snd_emu10k1,snd_pcm
snd_page_alloc          9668  2 snd_emu10k1,snd_pcm
snd_util_mem            4352  1 snd_emu10k1
snd_hwdep               9760  1 snd_emu10k1
snd                    56164  12 snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep
soundcore              10080  1 snd
ehci_hcd               36168  0
usbhid                 28224  0
uhci_hcd               32528  0
via_rhine              24388  0
mii                     5056  1 via_rhine
lp                     11076  0
parport_pc             36228  1
parport                37640  2 lp,parport_pc
usbcore               124472  4 ehci_hcd,usbhid,uhci_hcd

lshwd:

[pierre@athlon ~]$ lshwd
00:00.0 Host bridge: Advanced Micro Devices|AMD-751 [Irongate] System Controller (amd-k7-agp)
00:01.0 PCI bridge: Advanced Micro Devices|AMD-751 PCI to PCI bridge (unknown)
00:07.0 ISA bridge: Advanced Micro Devices|AMD-756 PCI to ISA bridge (unknown)
00:07.1 IDE interface: Advanced Micro Devices|AMD-756 (Viper) Bus Master IDE controller (amd74xx)
00:07.3 Bridge: Advanced Micro Devices|AMD-756 Power Management Controller (i2c-amd756)
00:09.0 Ethernet controller: VIA Technologies|VT6102 [Rhine II 10/100] (via-rhine)
00:0a.0 USB Controller: VIA Technologies|VT82C586B USB (uhci_hcd)
00:0a.1 USB Controller: VIA Technologies|VT82C586B USB (uhci_hcd)
00:0a.2 USB Controller: VIA Technologies Inc|VT8235 USB Enhanced Controller (ehci-hcd)
00:0c.0 Multimedia audio controller: Creative Labs|SB Live! (audio) (snd-emu10k1)
00:0c.1 Input device controller: Creative Labs|SB Live! (joystick) (emu10k1-gp)
01:05.0 VGA compatible controller: nVidia Corp.|Riva TNT 128 (nv)
003:001 USB Hub: Virtual|Hub (unknown)
002:005 USB Human Interface Devices: Logitech Inc.|Optical Mouse [/dev/input/mice] (usbhid)
002:004 USB : Hewlett-Packard|ScanJet 4300C (scanner)
002:001 USB Hub: Virtual|Hub (unknown)
001:001 USB Hub: Virtual|Hub (unknown)

With kernel26 you do not need a scanner-modul. Sane runs with libusb. For the printer I need " lp" and "parport_pc".

As you can see some modules for the sb-live would not be loaded by lshwd.


Edit: I replaced htoplug with lshwd nd it loads the following modules:

nvidia               3914300  12
usbhid                 28224  0
snd_emu10k1           103684  2
snd_rawmidi            26272  1 snd_emu10k1
snd_seq_device          8460  2 snd_emu10k1,snd_rawmidi
snd_ac97_codec         77944  1 snd_emu10k1
snd_pcm                97608  3 snd_emu10k1,snd_ac97_codec
snd_timer              26948  2 snd_emu10k1,snd_pcm
snd_page_alloc          9668  2 snd_emu10k1,snd_pcm
snd_util_mem            4352  1 snd_emu10k1
snd_hwdep               9760  1 snd_emu10k1
snd                    56164  10 snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer,snd_hwdep
soundcore              10080  1 snd
ehci_hcd               36168  0
uhci_hcd               32528  0
via_rhine              24388  0
mii                     5056  1 via_rhine
lp                     11076  0
parport_pc             36228  1
parport                37640  2 lp,parport_pc
usbcore               124472  4 usbhid,ehci_hcd,uhci_hcd

Only lp ad parport_pc must be loaded by hand. It seems as if lshwd might be a great replacment for the horplug-deamon. It`s quite fast. :-)

Offline

#39 2005-06-06 21:36:05

z4ziggy
Member
From: Israel
Registered: 2004-03-29
Posts: 573
Website

Re: lshwd 2.0

tnx for the input. i will try looking into the parallel thingie once i'll have some free time.

since it will take me sometime to get firewire devices, im releasing 2.0-rc4 so ppl can start testing the new sysfs support (using "-s" parameter).

[edit]PS. using the new sysfs allows users to retireve attached module to usb device (only allowed for root under procfs). [/edit]

> changes
version 2.0-rc4
+ added sysfs support (EXPERIMENTAL)
+ fixed memory leak
+ fixed classid in usb_procfs scanner
+ fixed some small bugs

http://user-contributions.org/projects/ … rc4.tar.gz

Offline

#40 2005-06-06 22:04:11

i3839
Member
Registered: 2004-02-04
Posts: 1,185

Re: lshwd 2.0

Works for me. It finds "hub" instead of "unknown" for the USB hub with sysfs, which seems better (not that I used hub, but I would if I had a usb mouse). That was the only difference.

Offline

#41 2005-06-06 22:48:54

tomk
Forum Fellow
From: Ireland
Registered: 2004-07-21
Posts: 9,839

Re: lshwd 2.0

z4ziggy wrote:

i dropped pcmcia detection since from what i've learned all pcmcia devices are listed under /proc/bus/pci <snip> i'd like to confirm this please

Hope I'm not too late with this, but my pcmcia Bluetooth card does not show up in /proc/bus/pci, AFAICS. I'm looking at the devices file in that directory, and my wifi card shows up fine, presumably because it's Cardbus, and handled as a pci device. The bluetooth card is "original" pcmcia, handled by cardmgr.

I'll try 2.0-rc4 to see what comes up.

<Later>

OK, I've just tried rc4, and the output is exactly the same as the current release 1.1.3 - the pcmcia card is not detected.

Offline

#42 2005-06-07 04:35:28

dust
Member
Registered: 2005-06-04
Posts: 152
Website

Re: lshwd 2.0

Great work on this z4ziggy ! I'm still newby, but its proven as a great help in getting a few things running right smile .


Writing stories for a machine.

Offline

#43 2005-06-07 09:57:01

z4ziggy
Member
From: Israel
Registered: 2004-03-29
Posts: 573
Website

Re: lshwd 2.0

tnx ppl.

the usb module (hub) is shown on procfs too, but only with root since it uses ioctl to retrieve it. on sysfs its in a file, so any user can retrieve it.

regarding the pcmcia - ok... so some devices just have to make problems, do they? i'll recode the pcmcia and add it, see if u get the pcmcia device listed. please wait for 2.0-rc5.

Offline

#44 2005-06-07 11:56:05

i3839
Member
Registered: 2004-02-04
Posts: 1,185

Re: lshwd 2.0

I ran both as root, and only with -s it found 'hub'.

Offline

#45 2005-06-07 13:15:42

z4ziggy
Member
From: Israel
Registered: 2004-03-29
Posts: 573
Website

Re: lshwd 2.0

strange. it should have displayed the attached module name on both occasions.

regarding the pcmcia - ive added back the pcmcia procfs detection, and will release it with rc5 once the firewire will be finished too. then what is left is the pcmcia sysfs scanner...

Offline

#46 2005-06-12 07:18:56

rasat
Forum Fellow
From: Finland, working in Romania
Registered: 2002-12-27
Posts: 2,176
Website

Re: lshwd 2.0

Pierre wrote:

Would it be possible to detect the parallel-port and printer? And I noticed it detects my Scanner and assigns the modul "scanner" which does not exist in kernel 2.6

Among the general hardwares, detecting parallel-port devices is still missing. In hwd-4.6 I tried reading the kernel message but couldn't find an unique criteria, so it was removed in 4.7. Morover, usb devices are taking over parallel-port and there is little feedback to work with.

Offline

#47 2005-06-12 14:29:20

Riklaunim
Member
Registered: 2005-04-09
Posts: 106
Website

Re: lshwd 2.0

I'm playing with gentoo currently.. and he has lshw and similar tools. I've got:

    description: Notebook
    product: 110 series
    vendor: Compaq
    version: 0F09
    serial: 6D1CKFKZ50H6
    width: 32 bits
    capabilities: smbios-2.3 dmi-2.3
    configuration: chassis=notebook uuid=00EEC858-6763-0010-AB16-68FCDA576968
  *-core
       description: Motherboard
       product: 0734
       vendor: Compaq
       physical id: 0
       version: Rev.A
       serial: None
     *-firmware
          description: BIOS
          vendor: Phoenix Technologies LTD
          physical id: 0
          version: 0F08 (08/20/2001)
          size: 88KB
          capacity: 448KB
          capabilities: pci pcmcia pnp upgrade shadowing cdboot bootselect int5p
rintscreen int9keyboard int14serial int17printer int10video acpi agp biosbootspe
cification
     *-cpu
          description: CPU
          product: Pentium III (Coppermine)
          vendor: Intel Corp.
          physical id: 4
          bus info: cpu@0
          version: 6.8.10
          slot: Socket 370
          size: 850MHz
          width: 32 bits
          clock: 100MHz
          capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 sep
mtrr pge mca cmov pat pse36 mmx fxsr sse
        *-cache:0
             description: L1 cache
             physical id: 9
             slot: L1 Cache
             size: 32KB
             capacity: 128KB
             capabilities: asynchronous internal write-back
        *-cache:1
             description: L2 cache
             physical id: a
             slot: L2 Cache
             size: 256KB
             capacity: 1MB
             capabilities: burst internal write-through
     *-memory
          description: System Memory
          physical id: c
          slot: System board or motherboard
          size: 256MB
          capacity: 384MB
        *-bank:0
             description: DIMM DRAM Synchronous
             physical id: 0
             slot: M1
             size: 64MB
             width: 32 bits
        *-bank:1
             description: DIMM DRAM Synchronous
             physical id: 1
             slot: M2
             size: 128MB
             width: 32 bits
        *-bank:2
             description: DIMM DRAM Synchronous
             physical id: 2
             slot: M3
             size: 64MB
             width: 32 bits
     *-pci
          description: Host bridge
          product: VT8601 [Apollo ProMedia]
          vendor: VIA Technologies, Inc.
          physical id: f8000000
          bus info: pci@00:00.0
          version: 05
          width: 32 bits
          clock: 33MHz
          resources: iomemory:f8000000-fbffffff
        *-pci
             description: PCI bridge
             product: VT8601 [Apollo ProMedia AGP]
             vendor: VIA Technologies, Inc.
             physical id: 1
             bus info: pci@00:01.0
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: pci normal_decode bus_master cap_list
           *-display
                description: VGA compatible controller
                product: CyberBlade i1
                vendor: Trident Microsystems
                physical id: 0
                bus info: pci@01:00.0
                logical name: /dev/fb0
                version: 6a
                size: 8MB
                width: 32 bits
                clock: 66MHz
                capabilities: vga bus_master cap_list fb
                configuration: depth=8 driver=tridentfb frequency=59.94Hz mode=6
40x480 visual=pseudocolor xres=640 yres=480
                resources: iomemory:f5000000-f57fffff iomemory:f4100000-f411ffff
 iomemory:f4800000-f4ffffff irq:9
        *-isa
             description: ISA bridge
             product: VT82C686 [Apollo Super South]
             vendor: VIA Technologies, Inc.
             physical id: 7
             bus info: pci@00:07.0
             version: 22
             width: 32 bits
             clock: 33MHz
             capabilities: isa bus_master cap_list
             configuration: driver=parport_pc
        *-ide
             description: IDE interface
             product: VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE
             vendor: VIA Technologies, Inc.
             physical id: 7.1
             bus info: pci@00:07.1
             version: 10
             width: 32 bits
             clock: 33MHz
             capabilities: ide bus_master cap_list
             configuration: driver=VIA_IDE
             resources: ioport:1460-146f
           *-ide:0
                description: IDE Channel 0
                physical id: 0
                bus info: ide@0
                logical name: ide0
                clock: 33MHz
              *-disk
                   description: ATA Disk
                   product: TOSHIBA MK2023GAS
                   vendor: Toshiba
                   physical id: 0
                   bus info: ide@0.0
                   logical name: /dev/hda
                   version: MA014A
                   serial: 34CR0614T
                   size: 18GB
                   capacity: 18GB
                   capabilities: ata dma lba iordy smart security pm apm
                   configuration: apm=off mode=udma2 smart=on
           *-ide:1
                description: IDE Channel 1
                physical id: 1
                bus info: ide@1
                logical name: ide1
                clock: 33MHz
              *-cdrom
                   description: DVD reader
                   product: LG DVD-ROM DRN-8060B
                   physical id: 0
                   bus info: ide@1.0
                   logical name: /dev/hdc
                   version: 3.10
                   serial: 2000/12/02
                   capabilities: packet atapi cdrom removable nonmagnetic dma lb
a iordy audio dvd
                   configuration: mode=udma2
        *-usb
             description: USB Controller
             product: VT82xxxxx UHCI USB 1.1 Controller
             vendor: VIA Technologies, Inc.
             physical id: 7.2
             bus info: pci@00:07.2
             version: 10
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master cap_list
             configuration: driver=uhci_hcd
             resources: ioport:1440-145f irq:11
           *-usbhost
                product: UHCI Host Controller
                vendor: Linux 2.6.11-gentoo-r9 uhci_hcd
                physical id: 1
                bus info: usb@1
                logical name: usb1
                version: 2.06
                capabilities: usb-1.10
                configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
              *-usb
                   description: Mouse
                   product: USB-PS/2 Optical Mouse
                   vendor: Logitech
                   physical id: 2
                   bus info: usb@1:2
                   version: 11.10
                   capabilities: usb-2.00
                   configuration: driver=usbhid maxpower=98mA speed=1.5MB/s
        *-bridge UNCLAIMED
             description: Bridge
             product: VT82C686 [Apollo Super ACPI]
             vendor: VIA Technologies, Inc.
             physical id: 7.4
             bus info: pci@00:07.4
             version: 30
             width: 32 bits
             clock: 33MHz
             capabilities: bridge cap_list
             resources: irq:10
        *-multimedia UNCLAIMED
             description: Multimedia audio controller
             product: VT82C686 AC97 Audio Controller
             vendor: VIA Technologies, Inc.
             physical id: 7.5
             bus info: pci@00:07.5
             version: 20
             width: 32 bits
             clock: 33MHz
             capabilities: cap_list
             resources: ioport:1000-10ff ioport:1474-1477 ioport:1470-1473 irq:9
        *-network DISABLED
             description: Ethernet interface
             product: 82557/8/9 [Ethernet Pro 100]
             vendor: Intel Corp.
             physical id: 9
             bus info: pci@00:09.0
             logical name: eth0
             version: 09
             serial: 00:d0:59:80:c5:91
             size: 10MB/s
             capacity: 100MB/s
             width: 32 bits
             clock: 33MHz
             capabilities: bus_master cap_list ethernet physical tp mii 10bt 10b
t-fd 100bt 100bt-fd autonegociation
             configuration: autonegociation=on broadcast=yes driver=e100 driverv
ersion=3.3.6-k2-NAPI duplex=half firmware=N/A link=no multicast=yes port=MII spe
ed=10MB/s
             resources: iomemory:f4020000-f4020fff ioport:1400-143f iomemory:f40
00000-f401ffff irq:11
        *-communication
             description: Serial controller
             product: LT WinModem
             vendor: Agere Systems (former Lucent Microelectronics)
             physical id: 9.1
             bus info: pci@00:09.1
             version: 00
             width: 32 bits
             clock: 33MHz
             capabilities: 8250 cap_list
             configuration: driver=serial
             resources: ioport:1478-147f iomemory:f4021000-f4021fff irq:11
        *-pcmcia
             description: CardBus bridge
             product: PCI1410 PC card Cardbus Controller
             vendor: Texas Instruments
             physical id: a
             bus info: pci@00:0a.0
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: pcmcia bus_master cap_list
             configuration: driver=yenta_cardbus
             resources: iomemory:f800000-f800fff irq:11
     *-usb:0
          description: USB Controller
          product: USB
          vendor: NEC Corporation
          physical id: 1
          bus info: pci@02:00.0
          version: 41
          width: 32 bits
          clock: 33MHz
          capabilities: ohci bus_master cap_list
          configuration: driver=ohci_hcd
          resources: iomemory:10000000-10000fff irq:11
        *-usbhost
             product: OHCI Host Controller
             vendor: Linux 2.6.11-gentoo-r9 ohci_hcd
             physical id: 1
             bus info: usb@2
             logical name: usb2
             version: 2.06
             capabilities: usb-1.10
             configuration: driver=hub maxpower=0mA slots=3 speed=12.0MB/s
     *-usb:1
          description: USB Controller
          product: USB
          vendor: NEC Corporation
          physical id: 0.1
          bus info: pci@02:00.1
          version: 41
          width: 32 bits
          clock: 33MHz
          capabilities: ohci bus_master cap_list
          configuration: driver=ohci_hcd
          resources: iomemory:10001000-10001fff irq:11
        *-usbhost
             product: OHCI Host Controller
             vendor: Linux 2.6.11-gentoo-r9 ohci_hcd
             physical id: 1
             bus info: usb@3
             logical name: usb3
             version: 2.06
             capabilities: usb-1.10
             configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
     *-usb:2
          description: USB Controller
          product: USB 2.0
          vendor: NEC Corporation
          physical id: 0.2
          bus info: pci@02:00.2
          version: 02
          width: 32 bits
          clock: 33MHz
          capabilities: ehci bus_master cap_list
          configuration: driver=ehci_hcd
          resources: iomemory:10002000-100020ff irq:11
        *-usbhost
             product: EHCI Host Controller
             vendor: Linux 2.6.11-gentoo-r9 ehci_hcd
             physical id: 1
             bus info: usb@4
             logical name: usb4
             version: 2.06
             capabilities: usb-2.00
             configuration: driver=hub maxpower=0mA slots=5 speed=480.0MB/s
           *-usb
                description: Mass storage device
                product: Mass Storage Device
                vendor: USB2.0 External
                physical id: 1
                bus info: usb@4:1
                logical name: scsi1
                version: 0.01
                serial: DEF108F5BB96
                capabilities: usb-2.00 scsi emulated scsi-host
                configuration: driver=usb-storage maxpower=0mA speed=480.0MB/s
              *-cdrom
                   description: DVD writer
                   product: DVDRW SOHW-1633S
                   vendor: LITE-ON
                   physical id: 0.0.0
                   bus info: scsi@1:0.0.0
                   logical name: /dev/cdrom1
                   logical name: /dev/dvd1
                   logical name: /dev/scd0
                   logical name: /dev/sr0
                   version: BS0H
                   capabilities: removable audio cd-r cd-rw dvd dvd-r

You can download it from http://gentoo.zie.pg.gda.pl/distfiles/l … .04.tar.gz

Offline

#48 2005-06-12 18:30:12

z4ziggy
Member
From: Israel
Registered: 2004-03-29
Posts: 573
Website

Re: lshwd 2.0

looks very intresting project. i might look at his drives/cdrom enum to add to lshwd.

Offline

#49 2005-06-15 06:49:18

rasat
Forum Fellow
From: Finland, working in Romania
Registered: 2002-12-27
Posts: 2,176
Website

Re: lshwd 2.0

Seems to work well.
For my information, does ver. 2.0 still uses the pci-, usb- and pcmciatable? If it does, in what directory will the tables be located? Currently in 1.x they are in /usr/share/hwdata

Offline

#50 2005-06-15 16:46:33

z4ziggy
Member
From: Israel
Registered: 2004-03-29
Posts: 573
Website

Re: lshwd 2.0

yep, still using the table files.
as before, they can be located at same directory as the binary (lshwd) or under /usr/share/hwdata.

Offline

Board footer

Powered by FluxBB